diff mbox series

arm64: dts: imx8mm: add pgc/blk_ctl nodes

Message ID 20210604111005.6804-1-peng.fan@oss.nxp.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mm: add pgc/blk_ctl nodes | expand

Commit Message

Peng Fan (OSS) June 4, 2021, 11:10 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
because some pgc domain relies on blk-ctl power domain, so
they need to be added together.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V1:
 Depends on the blk-ctl patchset,
 https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210522134249.15322-1-peng.fan@oss.nxp.com/

 Shawn,
  Since the blk-ctl patchset is in good shape and tested, is it ok for
  you to pick up?
 Thanks

 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128 ++++++++++++++++++++++
 1 file changed, 128 insertions(+)

Comments

Adam Ford June 29, 2021, 1:36 p.m. UTC | #1
On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan@nxp.com>
>
> With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
> because some pgc domain relies on blk-ctl power domain, so
> they need to be added together.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>
> V1:
>  Depends on the blk-ctl patchset,
>  https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210522134249.15322-1-peng.fan@oss.nxp.com/
>
>  Shawn,
>   Since the blk-ctl patchset is in good shape and tested, is it ok for
>   you to pick up?
>  Thanks
>
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128 ++++++++++++++++++++++
>  1 file changed, 128 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index e7648c3b8390..0e01ff649956 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -7,6 +7,8 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  #include "imx8mm-pinfunc.h"
> @@ -609,6 +611,109 @@ src: reset-controller@30390000 {
>                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>                                 #reset-cells = <1>;
>                         };
> +
> +                       gpc: gpc@303a0000 {
> +                               compatible = "fsl,imx8mm-gpc";
> +                               reg = <0x303a0000 0x10000>;
> +                               interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +                               interrupt-parent = <&gic>;
> +                               interrupt-controller;
> +                               #interrupt-cells = <3>;
> +
> +                               pgc {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       pgc_hsiomix: power-domain@0 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
> +                                               clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
> +                                       };
> +
> +                                       pgc_pcie: power-domain@1 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_PCIE>;
> +                                               power-domains = <&pgc_hsiomix>;
> +                                               clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
> +                                       };
> +
> +                                       pgc_otg1: power-domain@2 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_OTG1>;
> +                                               power-domains = <&pgc_hsiomix>;
> +                                       };
> +
> +                                       pgc_otg2: power-domain@3 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_OTG2>;
> +                                               power-domains = <&pgc_hsiomix>;
> +                                       };
> +

Any change you could add the references to pgc_otg1 and pgc_otg2 to
their respective OTG nodes?  Without them, enabling OTG1 or OTG2 can
result in a hang unless it was started in U-Boot.

> +                                       pgc_gpumix: power-domain@4 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
> +                                               clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> +                                                        <&clk IMX8MM_CLK_GPU_AHB>;
> +                                       };
> +
> +                                       pgc_gpu: power-domain@5 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_GPU>;
> +                                               clocks = <&clk IMX8MM_CLK_GPU_AHB>,
> +                                                        <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> +                                                        <&clk IMX8MM_CLK_GPU2D_ROOT>,
> +                                                        <&clk IMX8MM_CLK_GPU3D_ROOT>;
> +                                               resets = <&src IMX8MQ_RESET_GPU_RESET>;
> +                                               power-domains = <&pgc_gpumix>;
> +                                       };
> +
> +                                       pgc_vpumix: power-domain@6 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
> +                                               clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
> +                                               resets = <&src IMX8MQ_RESET_VPU_RESET>;
> +                                       };
> +
> +                                       pgc_vpu_g1: power-domain@7 {
> +                                               #power-domain-cells = <0>;
> +                                               power-domains =
> +                                               <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
> +                                               clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
> +                                       };
> +
> +                                       pgc_vpu_g2: power-domain@8 {
> +                                               #power-domain-cells = <0>;
> +                                               power-domains =
> +                                               <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
> +                                               clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
> +                                       };
> +
> +                                       pgc_vpu_h1: power-domain@9 {
> +                                               #power-domain-cells = <0>;
> +                                               power-domains =
> +                                               <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
> +                                               clocks = <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> +                                       };
> +
> +                                       pgc_dispmix: power-domain@10 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
> +                                               clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> +                                                        <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> +                                                        <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> +                                       };
> +
> +                                       pgc_mipi: power-domain@11 {
> +                                               #power-domain-cells = <0>;
> +                                               reg = <IMX8MM_POWER_DOMAIN_MIPI>;
> +                                               power-domains =
> +                                               <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> +                                       };
> +                               };
> +                       };
>                 };
>
>                 aips2: bus@30400000 {
> @@ -960,6 +1065,18 @@ aips4: bus@32c00000 {
>                         #size-cells = <1>;
>                         ranges = <0x32c00000 0x32c00000 0x400000>;
>
> +                       dispmix_blk_ctl: blk_ctl@32e28000 {
> +                               compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> +                               reg = <0x32e28000 0x100>;
> +                               #power-domain-cells = <1>;
> +                               #reset-cells = <1>;
> +                               power-domains = <&pgc_dispmix>, <&pgc_mipi>;
> +                               power-domain-names = "dispmix", "mipi";
> +                               clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> +                                        <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> +                                        <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> +                       };
> +
>                         usbotg1: usb@32e40000 {
>                                 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
>                                 reg = <0x32e40000 0x200>;
> @@ -1029,6 +1146,17 @@ gpmi: nand-controller@33002000{
>                         status = "disabled";
>                 };
>
> +               vpumix_blk_ctl: blk-ctl@38330000 {
> +                       compatible = "fsl,imx8mm-vpumix-blk-ctl", "syscon";
> +                       reg = <0x38330000 0x100>;
> +                       #power-domain-cells = <1>;
> +                       #reset-cells = <1>;
> +                       power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
> +                       power-domain-names = "vpumix", "vpu-g1", "vpu-g2", "vpu-h1";
> +                       clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
> +                                <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> +               };
> +
>                 gic: interrupt-controller@38800000 {
>                         compatible = "arm,gic-v3";
>                         reg = <0x38800000 0x10000>, /* GIC Dist */
> --
> 2.30.0
>
Fabio Estevam June 29, 2021, 2:29 p.m. UTC | #2
Hi Adam,

On Tue, Jun 29, 2021 at 10:36 AM Adam Ford <aford173@gmail.com> wrote:

> Any change you could add the references to pgc_otg1 and pgc_otg2 to
> their respective OTG nodes?  Without them, enabling OTG1 or OTG2 can
> result in a hang unless it was started in U-Boot.

There is a patch from Lucas doing that:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20200930155006.535712-12-l.stach@pengutronix.de/

Cheers
Peng Fan June 30, 2021, 9:36 a.m. UTC | #3
> Subject: Re: [PATCH] arm64: dts: imx8mm: add pgc/blk_ctl nodes
> 
> On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <peng.fan@oss.nxp.com>
> wrote:
> >
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
> > because some pgc domain relies on blk-ctl power domain, so they need
> > to be added together.
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >
> > V1:
> >  Depends on the blk-ctl patchset,
> >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202105221342
> 49
> > .15322-1-peng.fan%40oss.nxp.com%2F&amp;data=04%7C01%7Cpeng.fan%
> 40nxp.c
> >
> om%7C388c4bd417ff49d393c708d93b02e9f9%7C686ea1d3bc2b4c6fa92cd99
> c5c3016
> >
> 35%7C0%7C0%7C637605705985073021%7CUnknown%7CTWFpbGZsb3d8ey
> JWIjoiMC4wLj
> >
> AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
> ;sdata=
> >
> osAlqXkaxQ8qexwmd%2Fh33V0tUpVnT%2Fk7B5kq5vgVRVQ%3D&amp;reser
> ved=0
> >
> >  Shawn,
> >   Since the blk-ctl patchset is in good shape and tested, is it ok for
> >   you to pick up?
> >  Thanks
> >
> >  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128
> > ++++++++++++++++++++++
> >  1 file changed, 128 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index e7648c3b8390..0e01ff649956 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -7,6 +7,8 @@
> >  #include <dt-bindings/gpio/gpio.h>
> >  #include <dt-bindings/input/input.h>
> >  #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/power/imx8mm-power.h>
> > +#include <dt-bindings/reset/imx8mq-reset.h>
> >  #include <dt-bindings/thermal/thermal.h>
> >
> >  #include "imx8mm-pinfunc.h"
> > @@ -609,6 +611,109 @@ src: reset-controller@30390000 {
> >                                 interrupts = <GIC_SPI 89
> IRQ_TYPE_LEVEL_HIGH>;
> >                                 #reset-cells = <1>;
> >                         };
> > +
> > +                       gpc: gpc@303a0000 {
> > +                               compatible = "fsl,imx8mm-gpc";
> > +                               reg = <0x303a0000 0x10000>;
> > +                               interrupts = <GIC_SPI 87
> IRQ_TYPE_LEVEL_HIGH>;
> > +                               interrupt-parent = <&gic>;
> > +                               interrupt-controller;
> > +                               #interrupt-cells = <3>;
> > +
> > +                               pgc {
> > +                                       #address-cells = <1>;
> > +                                       #size-cells = <0>;
> > +
> > +                                       pgc_hsiomix:
> power-domain@0 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_HSIOMIX>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_USB1_CTRL_ROOT>;
> > +                                       };
> > +
> > +                                       pgc_pcie:
> power-domain@1 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_PCIE>;
> > +                                               power-domains
> = <&pgc_hsiomix>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_PCIE1_ROOT>;
> > +                                       };
> > +
> > +                                       pgc_otg1:
> power-domain@2 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_OTG1>;
> > +                                               power-domains
> = <&pgc_hsiomix>;
> > +                                       };
> > +
> > +                                       pgc_otg2:
> power-domain@3 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_OTG2>;
> > +                                               power-domains
> = <&pgc_hsiomix>;
> > +                                       };
> > +
> 
> Any change you could add the references to pgc_otg1 and pgc_otg2 to their
> respective OTG nodes?  Without them, enabling OTG1 or OTG2 can result in a
> hang unless it was started in U-Boot.

Will post v2 to add that, really hope the driver part could be in, then move on.

Thanks,
Peng.

> 
> > +                                       pgc_gpumix:
> power-domain@4 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_GPUMIX>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_GPU_BUS_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU_AHB>;
> > +                                       };
> > +
> > +                                       pgc_gpu:
> power-domain@5 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_GPU>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_GPU_AHB>,
> > +
> <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU2D_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU3D_ROOT>;
> > +                                               resets = <&src
> IMX8MQ_RESET_GPU_RESET>;
> > +                                               power-domains
> = <&pgc_gpumix>;
> > +                                       };
> > +
> > +                                       pgc_vpumix:
> power-domain@6 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_VPUMIX>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_VPU_DEC_ROOT>;
> > +                                               resets = <&src
> IMX8MQ_RESET_VPU_RESET>;
> > +                                       };
> > +
> > +                                       pgc_vpu_g1:
> power-domain@7 {
> > +
> #power-domain-cells = <0>;
> > +                                               power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_VPUG1>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_VPU_G1_ROOT>;
> > +                                       };
> > +
> > +                                       pgc_vpu_g2:
> power-domain@8 {
> > +
> #power-domain-cells = <0>;
> > +                                               power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_VPUG2>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_VPU_G2_ROOT>;
> > +                                       };
> > +
> > +                                       pgc_vpu_h1:
> power-domain@9 {
> > +
> #power-domain-cells = <0>;
> > +                                               power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_VPUH1>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_VPU_H1_ROOT>;
> > +                                       };
> > +
> > +                                       pgc_dispmix:
> power-domain@10 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_DISPMIX>;
> > +                                               clocks = <&clk
> IMX8MM_CLK_DISP_ROOT>,
> > +
> <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> > +
> <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> > +                                       };
> > +
> > +                                       pgc_mipi:
> power-domain@11 {
> > +
> #power-domain-cells = <0>;
> > +                                               reg =
> <IMX8MM_POWER_DOMAIN_MIPI>;
> > +                                               power-domains
> =
> > +
> <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> > +                                       };
> > +                               };
> > +                       };
> >                 };
> >
> >                 aips2: bus@30400000 {
> > @@ -960,6 +1065,18 @@ aips4: bus@32c00000 {
> >                         #size-cells = <1>;
> >                         ranges = <0x32c00000 0x32c00000
> 0x400000>;
> >
> > +                       dispmix_blk_ctl: blk_ctl@32e28000 {
> > +                               compatible =
> "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> > +                               reg = <0x32e28000 0x100>;
> > +                               #power-domain-cells = <1>;
> > +                               #reset-cells = <1>;
> > +                               power-domains = <&pgc_dispmix>,
> <&pgc_mipi>;
> > +                               power-domain-names = "dispmix",
> "mipi";
> > +                               clocks = <&clk
> IMX8MM_CLK_DISP_ROOT>,
> > +                                        <&clk
> IMX8MM_CLK_DISP_AXI_ROOT>,
> > +                                        <&clk
> IMX8MM_CLK_DISP_APB_ROOT>;
> > +                       };
> > +
> >                         usbotg1: usb@32e40000 {
> >                                 compatible = "fsl,imx8mm-usb",
> "fsl,imx7d-usb";
> >                                 reg = <0x32e40000 0x200>; @@
> -1029,6
> > +1146,17 @@ gpmi: nand-controller@33002000{
> >                         status = "disabled";
> >                 };
> >
> > +               vpumix_blk_ctl: blk-ctl@38330000 {
> > +                       compatible = "fsl,imx8mm-vpumix-blk-ctl",
> "syscon";
> > +                       reg = <0x38330000 0x100>;
> > +                       #power-domain-cells = <1>;
> > +                       #reset-cells = <1>;
> > +                       power-domains = <&pgc_vpumix>,
> <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
> > +                       power-domain-names = "vpumix", "vpu-g1",
> "vpu-g2", "vpu-h1";
> > +                       clocks = <&clk
> IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
> > +                                <&clk
> IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> > +               };
> > +
> >                 gic: interrupt-controller@38800000 {
> >                         compatible = "arm,gic-v3";
> >                         reg = <0x38800000 0x10000>, /* GIC Dist */
> > --
> > 2.30.0
> >
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index e7648c3b8390..0e01ff649956 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -7,6 +7,8 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mm-pinfunc.h"
@@ -609,6 +611,109 @@  src: reset-controller@30390000 {
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mm-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+					};
+
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
+						power-domains = <&pgc_hsiomix>;
+						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_gpumix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU_AHB>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
+							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_vpumix: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+						resets = <&src IMX8MQ_RESET_VPU_RESET>;
+					};
+
+					pgc_vpu_g1: power-domain@7 {
+						#power-domain-cells = <0>;
+						power-domains =
+						<&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+						clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+					};
+
+					pgc_vpu_g2: power-domain@8 {
+						#power-domain-cells = <0>;
+						power-domains =
+						<&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+						clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+					};
+
+					pgc_vpu_h1: power-domain@9 {
+						#power-domain-cells = <0>;
+						power-domains =
+						<&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+						clocks = <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+					};
+
+					pgc_dispmix: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+					};
+
+					pgc_mipi: power-domain@11 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
+						power-domains =
+						<&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
+					};
+				};
+			};
 		};
 
 		aips2: bus@30400000 {
@@ -960,6 +1065,18 @@  aips4: bus@32c00000 {
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
 
+			dispmix_blk_ctl: blk_ctl@32e28000 {
+				compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
+				reg = <0x32e28000 0x100>;
+				#power-domain-cells = <1>;
+				#reset-cells = <1>;
+				power-domains = <&pgc_dispmix>, <&pgc_mipi>;
+				power-domain-names = "dispmix", "mipi";
+				clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+			};
+
 			usbotg1: usb@32e40000 {
 				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
 				reg = <0x32e40000 0x200>;
@@ -1029,6 +1146,17 @@  gpmi: nand-controller@33002000{
 			status = "disabled";
 		};
 
+		vpumix_blk_ctl: blk-ctl@38330000 {
+			compatible = "fsl,imx8mm-vpumix-blk-ctl", "syscon";
+			reg = <0x38330000 0x100>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+			power-domain-names = "vpumix", "vpu-g1", "vpu-g2", "vpu-h1";
+			clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>, /* GIC Dist */