| Message ID | 20210630102408.3543024-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] mmc: mmci: De-assert reset on probe | expand |
On 6/30/21 12:24 PM, Linus Walleij wrote: > If we find a reset handle when probing the MMCI block, > make sure the reset is de-asserted. It could happen that > a hardware has reset asserted at boot. > Hi Linus, I was wondering on which HW you saw this issue? But I've seen this kind of thing is also done in some other drivers, so maybe it is just an alignment? Anyway I tested it on STM32MP157C-EV1 board, so feel free to add my: Tested-by: Yann Gautier <yann.gautier@foss.st.com> Regards, Yann > Cc: Russell King <linux@armlinux.org.uk> > Cc: Yann Gautier <yann.gautier@foss.st.com> > Cc: Ludovic Barre <ludovic.barre@st.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > ChangeLog v1->v2: > - Drop the else {} clause: reset_control_deassert() handles > NULL just fine. > --- > drivers/mmc/host/mmci.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c > index 984d35055156..3765e2f4ad98 100644 > --- a/drivers/mmc/host/mmci.c > +++ b/drivers/mmc/host/mmci.c > @@ -2126,6 +2126,9 @@ static int mmci_probe(struct amba_device *dev, > ret = PTR_ERR(host->rst); > goto clk_disable; > } > + ret = reset_control_deassert(host->rst); > + if (ret) > + dev_err(mmc_dev(mmc), "failed to de-assert reset\n"); > > /* Get regulators and the supported OCR mask */ > ret = mmc_regulator_get_supply(mmc); >
On Thu, Jul 1, 2021 at 2:39 PM Yann Gautier <yann.gautier@foss.st.com> wrote: > I was wondering on which HW you saw this issue? Haven't really seen it, but on ux500 we have no less that 6 (!) mmci blocks and it wouldn't surprise me if some of them are left in reset. Better safe than sorry. > But I've seen this kind of thing is also done in some other drivers, so > maybe it is just an alignment? It is good to deassert any reset line explicitly if you have them, I think. > Anyway I tested it on STM32MP157C-EV1 board, so feel free to add my: > Tested-by: Yann Gautier <yann.gautier@foss.st.com> Thanks! Linus Walleij
On Wed, 30 Jun 2021 at 12:26, Linus Walleij <linus.walleij@linaro.org> wrote: > > If we find a reset handle when probing the MMCI block, > make sure the reset is de-asserted. It could happen that > a hardware has reset asserted at boot. > > Cc: Russell King <linux@armlinux.org.uk> > Cc: Yann Gautier <yann.gautier@foss.st.com> > Cc: Ludovic Barre <ludovic.barre@st.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Queued for v5.15 on my devel branch, thanks! Kind regards Uffe > --- > ChangeLog v1->v2: > - Drop the else {} clause: reset_control_deassert() handles > NULL just fine. > --- > drivers/mmc/host/mmci.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c > index 984d35055156..3765e2f4ad98 100644 > --- a/drivers/mmc/host/mmci.c > +++ b/drivers/mmc/host/mmci.c > @@ -2126,6 +2126,9 @@ static int mmci_probe(struct amba_device *dev, > ret = PTR_ERR(host->rst); > goto clk_disable; > } > + ret = reset_control_deassert(host->rst); > + if (ret) > + dev_err(mmc_dev(mmc), "failed to de-assert reset\n"); > > /* Get regulators and the supported OCR mask */ > ret = mmc_regulator_get_supply(mmc); > -- > 2.31.1 >
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 984d35055156..3765e2f4ad98 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -2126,6 +2126,9 @@ static int mmci_probe(struct amba_device *dev, ret = PTR_ERR(host->rst); goto clk_disable; } + ret = reset_control_deassert(host->rst); + if (ret) + dev_err(mmc_dev(mmc), "failed to de-assert reset\n"); /* Get regulators and the supported OCR mask */ ret = mmc_regulator_get_supply(mmc);
If we find a reset handle when probing the MMCI block, make sure the reset is de-asserted. It could happen that a hardware has reset asserted at boot. Cc: Russell King <linux@armlinux.org.uk> Cc: Yann Gautier <yann.gautier@foss.st.com> Cc: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Drop the else {} clause: reset_control_deassert() handles NULL just fine. --- drivers/mmc/host/mmci.c | 3 +++ 1 file changed, 3 insertions(+)