diff mbox series

[v8,2/2] pwm: Add Aspeed ast2600 PWM support

Message ID 20210608064658.14262-3-billy_tsai@aspeedtech.com (mailing list archive)
State New, archived
Headers show
Series Support pwm driver for aspeed ast26xx | expand

Commit Message

Billy Tsai June 8, 2021, 6:46 a.m. UTC 
This patch add the support of PWM controller which can be found at aspeed
ast2600 soc. The pwm supoorts up to 16 channels and it's part function
of multi-function device "pwm-tach controller".

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/pwm/Kconfig              |   9 +
 drivers/pwm/Makefile             |   1 +
 drivers/pwm/pwm-aspeed-ast2600.c | 311 +++++++++++++++++++++++++++++++
 3 files changed, 321 insertions(+)
 create mode 100644 drivers/pwm/pwm-aspeed-ast2600.c

Comments

Uwe Kleine-König July 2, 2021, 2:31 p.m. UTC | #1 
Hello Billy,

On Tue, Jun 08, 2021 at 02:46:58PM +0800, Billy Tsai wrote:
> This patch add the support of PWM controller which can be found at aspeed
> ast2600 soc. The pwm supoorts up to 16 channels and it's part function
> of multi-function device "pwm-tach controller".
> 
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> ---
>  drivers/pwm/Kconfig              |   9 +
>  drivers/pwm/Makefile             |   1 +
>  drivers/pwm/pwm-aspeed-ast2600.c | 311 +++++++++++++++++++++++++++++++
>  3 files changed, 321 insertions(+)
>  create mode 100644 drivers/pwm/pwm-aspeed-ast2600.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 63be5362fd3a..a5aac3ca4ac7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -51,6 +51,15 @@ config PWM_AB8500
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm-ab8500.
>  
> +config PWM_ASPEED_AST2600
> +	tristate "Aspeed ast2600 PWM support"
> +	depends on ARCH_ASPEED || COMPILE_TEST
> +	help
> +	  This driver provides support for Aspeed ast2600 PWM controllers.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-aspeed-ast2600.
> +
>  config PWM_ATMEL
>  	tristate "Atmel PWM support"
>  	depends on OF
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index cbdcd55d69ee..ada454f9129a 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -2,6 +2,7 @@
>  obj-$(CONFIG_PWM)		+= core.o
>  obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
>  obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
> +obj-$(CONFIG_PWM_ASPEED_AST2600)	+= pwm-aspeed-ast2600.o
>  obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
>  obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
>  obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
> diff --git a/drivers/pwm/pwm-aspeed-ast2600.c b/drivers/pwm/pwm-aspeed-ast2600.c
> new file mode 100644
> index 000000000000..6ea0f7eb311f
> --- /dev/null
> +++ b/drivers/pwm/pwm-aspeed-ast2600.c
> @@ -0,0 +1,311 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2021 Aspeed Technology Inc.
> + *
> + * PWM controller driver for Aspeed ast2600 SoCs.
> + * This drivers doesn't support earlier version of the IP.
> + *
> + * The formula of pwm period duration:
> + * period duration = ((DIV_L + 1) * BIT(DIV_H) * (PERIOD + 1)) / input-clk
> + *
> + * The software driver fixes the period to 255, which causes the high-frequency
> + * precision of the PWM to be coarse, in exchange for the fineness of the duty cycle.
> + *
> + * Register usage:
> + * PIN_ENABLE: When it is unset the pwm controller will always output low to the extern.
> + * Use to determine whether the PWM channel is enabled or disabled
> + * CLK_ENABLE: When it is unset the pwm controller will reset the duty counter to 0 and
> + * output low to the PIN_ENABLE mux after that the driver can still change the pwm period
> + * and duty and the value will apply when CLK_ENABLE be set again.
> + * Use to determine whether duty_cycle bigger than 0.
> + * PWM_ASPEED_CTRL_INVERSE: When it is toggled the output value will inverse immediately.
> + * PWM_ASPEED_DUTY_CYCLE_FALLING_POINT/PWM_ASPEED_DUTY_CYCLE_RISING_POINT: When these two
> + * values are equal it means the duty cycle = 100%.
> + *
> + * Limitations:
> + * - When changing both duty cycle and period, we cannot prevent in
> + *   software that the output might produce a period with mixed
> + *   settings.
> + * - Disabling the PWM doesn't complete the current period.
> + *
> + * Improvements:
> + * - When only changing one of duty cycle or period, our pwm controller will not
> + *   generate the glitch, the configure will change at next cycle of pwm.
> + *   This improvement can disable/enable through PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/errno.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/sysfs.h>
> +#include <linux/reset.h>
> +#include <linux/regmap.h>
> +#include <linux/bitfield.h>
> +#include <linux/slab.h>
> +#include <linux/pwm.h>
> +#include <linux/math64.h>
> +
> +/* The channel number of Aspeed pwm controller */
> +#define PWM_ASPEED_NR_PWMS 16
> +
> +/* PWM Control Register */
> +#define PWM_ASPEED_CTRL(ch) ((ch) * 0x10 + 0x00)
> +#define PWM_ASPEED_CTRL_LOAD_SEL_RISING_AS_WDT BIT(19)
> +#define PWM_ASPEED_CTRL_DUTY_LOAD_AS_WDT_ENABLE BIT(18)
> +#define PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE BIT(17)
> +#define PWM_ASPEED_CTRL_CLK_ENABLE BIT(16)
> +#define PWM_ASPEED_CTRL_LEVEL_OUTPUT BIT(15)
> +#define PWM_ASPEED_CTRL_INVERSE BIT(14)
> +#define PWM_ASPEED_CTRL_OPEN_DRAIN_ENABLE BIT(13)
> +#define PWM_ASPEED_CTRL_PIN_ENABLE BIT(12)
> +#define PWM_ASPEED_CTRL_CLK_DIV_H GENMASK(11, 8)
> +#define PWM_ASPEED_CTRL_CLK_DIV_L GENMASK(7, 0)
> +
> +/* PWM Duty Cycle Register */
> +#define PWM_ASPEED_DUTY_CYCLE(ch) ((ch) * 0x10 + 0x04)
> +#define PWM_ASPEED_DUTY_CYCLE_PERIOD GENMASK(31, 24)
> +#define PWM_ASPEED_DUTY_CYCLE_POINT_AS_WDT GENMASK(23, 16)
> +#define PWM_ASPEED_DUTY_CYCLE_FALLING_POINT GENMASK(15, 8)
> +#define PWM_ASPEED_DUTY_CYCLE_RISING_POINT GENMASK(7, 0)
> +
> +/* PWM fixed value */
> +#define PWM_ASPEED_FIXED_PERIOD FIELD_MAX(PWM_ASPEED_DUTY_CYCLE_PERIOD)
> +
> +struct aspeed_pwm_data {
> +	struct pwm_chip chip;
> +	struct clk *clk;
> +	struct regmap *regmap;
> +	struct reset_control *reset;
> +};
> +
> +static inline struct aspeed_pwm_data *
> +aspeed_pwm_chip_to_data(struct pwm_chip *chip)
> +{
> +	return container_of(chip, struct aspeed_pwm_data, chip);
> +}
> +
> +static void aspeed_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> +				 struct pwm_state *state)
> +{
> +	struct device *dev = chip->dev;
> +	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> +	u32 index = pwm->hwpwm;
> +	bool polarity, ch_en, clk_en;
> +	u32 duty_pt, val;
> +	unsigned long rate;
> +	u64 div_h, div_l, clk_period;
> +
> +	regmap_read(priv->regmap, PWM_ASPEED_CTRL(index), &val);
> +	polarity = FIELD_GET(PWM_ASPEED_CTRL_INVERSE, val);
> +	ch_en = FIELD_GET(PWM_ASPEED_CTRL_PIN_ENABLE, val);
> +	clk_en = FIELD_GET(PWM_ASPEED_CTRL_CLK_ENABLE, val);
> +	div_h = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_H, val);
> +	div_l = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_L, val);
> +	regmap_read(priv->regmap, PWM_ASPEED_DUTY_CYCLE(index), &val);
> +	duty_pt = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT, val);
> +	clk_period = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_PERIOD, val);
> +
> +	rate = clk_get_rate(priv->clk);
> +	state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * _BITULL(div_h) *
> +						 (div_l + 1) * (clk_period + 1),
> +					 rate);

Instead of _BITULL(div_h) you can just do << div_h, which reads a bit
easier.

The multiplication can be up to:

	100000000 * (1 << 31) * (31 + 1) * (255 + 1)

right? This needs 71 bits and so might overflow a u64.

I guess to prevent that you have to do something like SH_DIV does for a
u32 division:

	u64 rem;

	/*
	 * To calculate
	 *
	 *   roundup(NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) << div_h / rate)
	 *
	 * we have to jump through some hoops because the numerator
	 * might not fit into a u64. So calculate:
	 *
	 *   roundup(NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) / rate) << div_h
	 *
	 * and fixup for the imprecision.
	 */
	nom = (u64)NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) + (rate - 1);
	rem = do_div(nom, rate);
	state->period = nom << div_h + DIV_ROUND_DOWN_ULL(rem << div_h + (rate >> 1), rate);

You might want to double check my math here, I didn't invest the time to
verify myself that this is sensible but just quickly combined SH_DIV and
DIV_ROUND_UP_ULL.

> +	if (clk_en && duty_pt)
> +		state->duty_cycle = DIV_ROUND_UP_ULL(
> +			state->period * duty_pt, clk_period + 1);

You're loosing precision here. You have to repeat the hoop jumping from
above to fix.

> +	else
> +		state->duty_cycle = clk_en ? state->period : 0;
> +	state->polarity = polarity;
> +	state->enabled = ch_en;
> +	dev_dbg(dev, "get period: %lldns, duty_cycle: %lldns", state->period,
> +		state->duty_cycle);
> +}
> +
> +static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			    const struct pwm_state *state)
> +{
> +	struct device *dev = chip->dev;
> +	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
> +	u32 index = pwm->hwpwm, duty_pt;
> +	unsigned long rate;
> +	u64 div_h, div_l, divisor;
> +	bool clk_en;
> +
> +	dev_dbg(dev, "expect period: %lldns, duty_cycle: %lldns", state->period,
> +		state->duty_cycle);
> +
> +	rate = clk_get_rate(priv->clk);
> +	/*
> +	 * Pick the smallest value for div_h so that div_l can be the biggest
> +	 * which results in a finer resolution near the target period value.
> +	 */
> +	divisor = (u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1) *
> +		  (FIELD_MAX(PWM_ASPEED_CTRL_CLK_DIV_L) + 1);
> +	div_h = order_base_2(DIV64_U64_ROUND_UP(rate * state->period, divisor));
> +	if (div_h > 0xf)
> +		div_h = 0xf;
> +
> +	divisor = ((u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1)) << div_h;
> +	div_l = div64_u64(rate * state->period, divisor);
> +
> +	if (div_l == 0)
> +		return -ERANGE;
> +
> +	div_l -= 1;
> +
> +	if (div_l > 255)
> +		div_l = 255;

I already checked that in the previous round, I assume that's fine now.

Best regards
Uwe
Billy Tsai July 9, 2021, 5:40 a.m. UTC | #2 
On 2021/7/2, 10:32 PM, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> wrote:

    Hello Billy,

    On Tue, Jun 08, 2021 at 02:46:58PM +0800, Billy Tsai wrote:
    >> This patch add the support of PWM controller which can be found at aspeed
    >> ast2600 soc. The pwm supoorts up to 16 channels and it's part function
    >> of multi-function device "pwm-tach controller".
    >> 
    >> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
    >> ---
    >>  drivers/pwm/Kconfig              |   9 +
    >>  drivers/pwm/Makefile             |   1 +
    >>  drivers/pwm/pwm-aspeed-ast2600.c | 311 +++++++++++++++++++++++++++++++
    >>  3 files changed, 321 insertions(+)
    >>  create mode 100644 drivers/pwm/pwm-aspeed-ast2600.c
    >> 
    >> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
    >> index 63be5362fd3a..a5aac3ca4ac7 100644
    >> --- a/drivers/pwm/Kconfig
    >> +++ b/drivers/pwm/Kconfig
    >> @@ -51,6 +51,15 @@ config PWM_AB8500
    >>  	  To compile this driver as a module, choose M here: the module
    >>  	  will be called pwm-ab8500.
    >>  
    >> +config PWM_ASPEED_AST2600
    >> +	tristate "Aspeed ast2600 PWM support"
    >> +	depends on ARCH_ASPEED || COMPILE_TEST
    >> +	help
    >> +	  This driver provides support for Aspeed ast2600 PWM controllers.
    >> +
    >> +	  To compile this driver as a module, choose M here: the module
    >> +	  will be called pwm-aspeed-ast2600.
    >> +
    >>  config PWM_ATMEL
    >>  	tristate "Atmel PWM support"
    >>  	depends on OF
    >> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
    >> index cbdcd55d69ee..ada454f9129a 100644
    >> --- a/drivers/pwm/Makefile
    >> +++ b/drivers/pwm/Makefile
    >> @@ -2,6 +2,7 @@
    >>  obj-$(CONFIG_PWM)		+= core.o
    >>  obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
    >>  obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
    >> +obj-$(CONFIG_PWM_ASPEED_AST2600)	+= pwm-aspeed-ast2600.o
    >>  obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
    >>  obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
    >>  obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
    >> diff --git a/drivers/pwm/pwm-aspeed-ast2600.c b/drivers/pwm/pwm-aspeed-ast2600.c
    >> new file mode 100644
    >> index 000000000000..6ea0f7eb311f
    >> --- /dev/null
    >> +++ b/drivers/pwm/pwm-aspeed-ast2600.c
    >> @@ -0,0 +1,311 @@
    >> +// SPDX-License-Identifier: GPL-2.0-or-later
    >> +/*
    >> + * Copyright (C) 2021 Aspeed Technology Inc.
    >> + *
    >> + * PWM controller driver for Aspeed ast2600 SoCs.
    >> + * This drivers doesn't support earlier version of the IP.
    >> + *
    >> + * The formula of pwm period duration:
    >> + * period duration = ((DIV_L + 1) * BIT(DIV_H) * (PERIOD + 1)) / input-clk
    >> + *
    >> + * The software driver fixes the period to 255, which causes the high-frequency
    >> + * precision of the PWM to be coarse, in exchange for the fineness of the duty cycle.
    >> + *
    >> + * Register usage:
    >> + * PIN_ENABLE: When it is unset the pwm controller will always output low to the extern.
    >> + * Use to determine whether the PWM channel is enabled or disabled
    >> + * CLK_ENABLE: When it is unset the pwm controller will reset the duty counter to 0 and
    >> + * output low to the PIN_ENABLE mux after that the driver can still change the pwm period
    >> + * and duty and the value will apply when CLK_ENABLE be set again.
    >> + * Use to determine whether duty_cycle bigger than 0.
    >> + * PWM_ASPEED_CTRL_INVERSE: When it is toggled the output value will inverse immediately.
    >> + * PWM_ASPEED_DUTY_CYCLE_FALLING_POINT/PWM_ASPEED_DUTY_CYCLE_RISING_POINT: When these two
    >> + * values are equal it means the duty cycle = 100%.
    >> + *
    >> + * Limitations:
    >> + * - When changing both duty cycle and period, we cannot prevent in
    >> + *   software that the output might produce a period with mixed
    >> + *   settings.
    >> + * - Disabling the PWM doesn't complete the current period.
    >> + *
    >> + * Improvements:
    >> + * - When only changing one of duty cycle or period, our pwm controller will not
    >> + *   generate the glitch, the configure will change at next cycle of pwm.
    >> + *   This improvement can disable/enable through PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE.
    >> + */
    >> +
    >> +#include <linux/clk.h>
    >> +#include <linux/errno.h>
    >> +#include <linux/io.h>
    >> +#include <linux/kernel.h>
    >> +#include <linux/mfd/syscon.h>
    >> +#include <linux/module.h>
    >> +#include <linux/of_platform.h>
    >> +#include <linux/of_device.h>
    >> +#include <linux/platform_device.h>
    >> +#include <linux/sysfs.h>
    >> +#include <linux/reset.h>
    >> +#include <linux/regmap.h>
    >> +#include <linux/bitfield.h>
    >> +#include <linux/slab.h>
    >> +#include <linux/pwm.h>
    >> +#include <linux/math64.h>
    >> +
    >> +/* The channel number of Aspeed pwm controller */
    >> +#define PWM_ASPEED_NR_PWMS 16
    >> +
    >> +/* PWM Control Register */
    >> +#define PWM_ASPEED_CTRL(ch) ((ch) * 0x10 + 0x00)
    >> +#define PWM_ASPEED_CTRL_LOAD_SEL_RISING_AS_WDT BIT(19)
    >> +#define PWM_ASPEED_CTRL_DUTY_LOAD_AS_WDT_ENABLE BIT(18)
    >> +#define PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE BIT(17)
    >> +#define PWM_ASPEED_CTRL_CLK_ENABLE BIT(16)
    >> +#define PWM_ASPEED_CTRL_LEVEL_OUTPUT BIT(15)
    >> +#define PWM_ASPEED_CTRL_INVERSE BIT(14)
    >> +#define PWM_ASPEED_CTRL_OPEN_DRAIN_ENABLE BIT(13)
    >> +#define PWM_ASPEED_CTRL_PIN_ENABLE BIT(12)
    >> +#define PWM_ASPEED_CTRL_CLK_DIV_H GENMASK(11, 8)
    >> +#define PWM_ASPEED_CTRL_CLK_DIV_L GENMASK(7, 0)
    >> +
    >> +/* PWM Duty Cycle Register */
    >> +#define PWM_ASPEED_DUTY_CYCLE(ch) ((ch) * 0x10 + 0x04)
    >> +#define PWM_ASPEED_DUTY_CYCLE_PERIOD GENMASK(31, 24)
    >> +#define PWM_ASPEED_DUTY_CYCLE_POINT_AS_WDT GENMASK(23, 16)
    >> +#define PWM_ASPEED_DUTY_CYCLE_FALLING_POINT GENMASK(15, 8)
    >> +#define PWM_ASPEED_DUTY_CYCLE_RISING_POINT GENMASK(7, 0)
    >> +
    >> +/* PWM fixed value */
    >> +#define PWM_ASPEED_FIXED_PERIOD FIELD_MAX(PWM_ASPEED_DUTY_CYCLE_PERIOD)
    >> +
    >> +struct aspeed_pwm_data {
    >> +	struct pwm_chip chip;
    >> +	struct clk *clk;
    >> +	struct regmap *regmap;
    >> +	struct reset_control *reset;
    >> +};
    >> +
    >> +static inline struct aspeed_pwm_data *
    >> +aspeed_pwm_chip_to_data(struct pwm_chip *chip)
    >> +{
    >> +	return container_of(chip, struct aspeed_pwm_data, chip);
    >> +}
    >> +
    >> +static void aspeed_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
    >> +				 struct pwm_state *state)
    >> +{
    >> +	struct device *dev = chip->dev;
    >> +	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
    >> +	u32 index = pwm->hwpwm;
    >> +	bool polarity, ch_en, clk_en;
    >> +	u32 duty_pt, val;
    >> +	unsigned long rate;
    >> +	u64 div_h, div_l, clk_period;
    >> +
    >> +	regmap_read(priv->regmap, PWM_ASPEED_CTRL(index), &val);
    >> +	polarity = FIELD_GET(PWM_ASPEED_CTRL_INVERSE, val);
    >> +	ch_en = FIELD_GET(PWM_ASPEED_CTRL_PIN_ENABLE, val);
    >> +	clk_en = FIELD_GET(PWM_ASPEED_CTRL_CLK_ENABLE, val);
    >> +	div_h = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_H, val);
    >> +	div_l = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_L, val);
    >> +	regmap_read(priv->regmap, PWM_ASPEED_DUTY_CYCLE(index), &val);
    >> +	duty_pt = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT, val);
    >> +	clk_period = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_PERIOD, val);
    >> +
    >> +	rate = clk_get_rate(priv->clk);
    >> +	state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * _BITULL(div_h) *
    >> +						 (div_l + 1) * (clk_period + 1),
    >> +					 rate);

    > Instead of _BITULL(div_h) you can just do << div_h, which reads a bit
    > easier.

Okay, I will send patch v9 to fix it.

    > The multiplication can be up to:

    >	100000000 * (1 << 31) * (31 + 1) * (255 + 1)

    > right? This needs 71 bits and so might overflow a u64.

No, the multiplication can be up to:

Max(div_h) = 15
Max(div_l) = 255
Max(clk_period) = 255
1000000000 * (1 << 15) * (255 + 1) * (255 + 1) < 2^64 - 1
it doesn't overflow a u64.

    > I guess to prevent that you have to do something like SH_DIV does for a
    > u32 division:

    >	u64 rem;

    >	/*
    >	 * To calculate
    >	 *
    >	 *   roundup(NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) << div_h / rate)
    >	 *
    >	 * we have to jump through some hoops because the numerator
    >	 * might not fit into a u64. So calculate:
    >	 *
    >	 *   roundup(NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) / rate) << div_h
    >	 *
    >	 * and fixup for the imprecision.
    >	 */
    >	nom = (u64)NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) + (rate - 1);
    >	rem = do_div(nom, rate);
    >	state->period = nom << div_h + DIV_ROUND_DOWN_ULL(rem << div_h + (rate >> 1), rate);

    > You might want to double check my math here, I didn't invest the time to
    > verify myself that this is sensible but just quickly combined SH_DIV and
    > DIV_ROUND_UP_ULL.

    >> +	if (clk_en && duty_pt)
    >> +		state->duty_cycle = DIV_ROUND_UP_ULL(
    >> +			state->period * duty_pt, clk_period + 1);

    > You're loosing precision here. You have to repeat the hoop jumping from
    > above to fix.

I will use your method to fix it.
Thanks

    > +	else
    > +		state->duty_cycle = clk_en ? state->period : 0;
    > +	state->polarity = polarity;
    > +	state->enabled = ch_en;
    > +	dev_dbg(dev, "get period: %lldns, duty_cycle: %lldns", state->period,
    > +		state->duty_cycle);
    > +}
    > +
    > +static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
    > +			    const struct pwm_state *state)
    > +{
    > +	struct device *dev = chip->dev;
    > +	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
    > +	u32 index = pwm->hwpwm, duty_pt;
    > +	unsigned long rate;
    > +	u64 div_h, div_l, divisor;
    > +	bool clk_en;
    > +
    > +	dev_dbg(dev, "expect period: %lldns, duty_cycle: %lldns", state->period,
    > +		state->duty_cycle);
    > +
    > +	rate = clk_get_rate(priv->clk);
    > +	/*
    > +	 * Pick the smallest value for div_h so that div_l can be the biggest
    > +	 * which results in a finer resolution near the target period value.
    > +	 */
    > +	divisor = (u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1) *
    > +		  (FIELD_MAX(PWM_ASPEED_CTRL_CLK_DIV_L) + 1);
    > +	div_h = order_base_2(DIV64_U64_ROUND_UP(rate * state->period, divisor));
    > +	if (div_h > 0xf)
    > +		div_h = 0xf;
    > +
    > +	divisor = ((u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1)) << div_h;
    > +	div_l = div64_u64(rate * state->period, divisor);
    > +
    > +	if (div_l == 0)
    > +		return -ERANGE;
    > +
    > +	div_l -= 1;
    > +
    > +	if (div_l > 255)
    > +		div_l = 255;

    > I already checked that in the previous round, I assume that's fine now.

Best Regards,
Billy Tsai
Uwe Kleine-König July 9, 2021, 5:53 a.m. UTC | #3 
Hello Billy,

On Fri, Jul 09, 2021 at 05:40:45AM +0000, Billy Tsai wrote:
> On 2021/7/2, 10:32 PM, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> wrote:
>     > The multiplication can be up to:
> 
>     >	100000000 * (1 << 31) * (31 + 1) * (255 + 1)
> 
>     > right? This needs 71 bits and so might overflow a u64.
> 
> No, the multiplication can be up to:
> 
> Max(div_h) = 15
> Max(div_l) = 255
> Max(clk_period) = 255
> 1000000000 * (1 << 15) * (255 + 1) * (255 + 1) < 2^64 - 1
> it doesn't overflow a u64.

Ah, you're right. Please note this in a comment (not that you were
right, but that it doesn't overflow :-)

Best regards
Uwe
Billy Tsai July 9, 2021, 5:59 a.m. UTC | #4 
On 2021/7/9, 1:40 PM, "Billy Tsai" <billy_tsai@aspeedtech.com> wrote:

    >    On Tue, Jun 08, 2021 at 02:46:58PM +0800, Billy Tsai wrote:
    >    >> This patch add the support of PWM controller which can be found at aspeed
    >    >> ast2600 soc. The pwm supoorts up to 16 channels and it's part function
    >    >> of multi-function device "pwm-tach controller".
    >    >> 
    >    >> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
    >    >> ---
    >    >>  drivers/pwm/Kconfig              |   9 +
    >    >>  drivers/pwm/Makefile             |   1 +
    >    >>  drivers/pwm/pwm-aspeed-ast2600.c | 311 +++++++++++++++++++++++++++++++
    >    >>  3 files changed, 321 insertions(+)
    >    >>  create mode 100644 drivers/pwm/pwm-aspeed-ast2600.c
    >    >> 
    >    >> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
    >    >> index 63be5362fd3a..a5aac3ca4ac7 100644
    >    >> --- a/drivers/pwm/Kconfig
    >    >> +++ b/drivers/pwm/Kconfig
    >    >> @@ -51,6 +51,15 @@ config PWM_AB8500
    >    >>  	  To compile this driver as a module, choose M here: the module
    >    >>  	  will be called pwm-ab8500.
    >    >>  
    >    >> +config PWM_ASPEED_AST2600
    >    >> +	tristate "Aspeed ast2600 PWM support"
    >    >> +	depends on ARCH_ASPEED || COMPILE_TEST
    >    >> +	help
    >    >> +	  This driver provides support for Aspeed ast2600 PWM controllers.
    >    >> +
    >    >> +	  To compile this driver as a module, choose M here: the module
    >    >> +	  will be called pwm-aspeed-ast2600.
    >    >> +
    >    >>  config PWM_ATMEL
    >    >>  	tristate "Atmel PWM support"
    >    >>  	depends on OF
    >    >> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
    >    >> index cbdcd55d69ee..ada454f9129a 100644
    >    >> --- a/drivers/pwm/Makefile
    >    >> +++ b/drivers/pwm/Makefile
    >    >> @@ -2,6 +2,7 @@
    >    >>  obj-$(CONFIG_PWM)		+= core.o
    >    >>  obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
    >    >>  obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
    >    >> +obj-$(CONFIG_PWM_ASPEED_AST2600)	+= pwm-aspeed-ast2600.o
    >    >>  obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
    >    >>  obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
    >    >>  obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
    >    >> diff --git a/drivers/pwm/pwm-aspeed-ast2600.c b/drivers/pwm/pwm-aspeed-ast2600.c
    >    >> new file mode 100644
    >    >> index 000000000000..6ea0f7eb311f
    >    >> --- /dev/null
    >    >> +++ b/drivers/pwm/pwm-aspeed-ast2600.c
    >    >> @@ -0,0 +1,311 @@
    >    >> +// SPDX-License-Identifier: GPL-2.0-or-later
    >    >> +/*
    >    >> + * Copyright (C) 2021 Aspeed Technology Inc.
    >    >> + *
    >    >> + * PWM controller driver for Aspeed ast2600 SoCs.
    >    >> + * This drivers doesn't support earlier version of the IP.
    >    >> + *
    >    >> + * The formula of pwm period duration:
    >    >> + * period duration = ((DIV_L + 1) * BIT(DIV_H) * (PERIOD + 1)) / input-clk
    >    >> + *
    >    >> + * The software driver fixes the period to 255, which causes the high-frequency
    >    >> + * precision of the PWM to be coarse, in exchange for the fineness of the duty cycle.
    >    >> + *
    >    >> + * Register usage:
    >    >> + * PIN_ENABLE: When it is unset the pwm controller will always output low to the extern.
    >    >> + * Use to determine whether the PWM channel is enabled or disabled
    >    >> + * CLK_ENABLE: When it is unset the pwm controller will reset the duty counter to 0 and
    >    >> + * output low to the PIN_ENABLE mux after that the driver can still change the pwm period
    >    >> + * and duty and the value will apply when CLK_ENABLE be set again.
    >    >> + * Use to determine whether duty_cycle bigger than 0.
    >    >> + * PWM_ASPEED_CTRL_INVERSE: When it is toggled the output value will inverse immediately.
    >    >> + * PWM_ASPEED_DUTY_CYCLE_FALLING_POINT/PWM_ASPEED_DUTY_CYCLE_RISING_POINT: When these two
    >    >> + * values are equal it means the duty cycle = 100%.
    >    >> + *
    >    >> + * Limitations:
    >    >> + * - When changing both duty cycle and period, we cannot prevent in
    >    >> + *   software that the output might produce a period with mixed
    >    >> + *   settings.
    >    >> + * - Disabling the PWM doesn't complete the current period.
    >    >> + *
    >    >> + * Improvements:
    >    >> + * - When only changing one of duty cycle or period, our pwm controller will not
    >    >> + *   generate the glitch, the configure will change at next cycle of pwm.
    >    >> + *   This improvement can disable/enable through PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE.
    >    >> + */
    >    >> +
    >    >> +#include <linux/clk.h>
    >    >> +#include <linux/errno.h>
    >    >> +#include <linux/io.h>
    >    >> +#include <linux/kernel.h>
    >    >> +#include <linux/mfd/syscon.h>
    >    >> +#include <linux/module.h>
    >    >> +#include <linux/of_platform.h>
    >    >> +#include <linux/of_device.h>
    >    >> +#include <linux/platform_device.h>
    >    >> +#include <linux/sysfs.h>
    >    >> +#include <linux/reset.h>
    >    >> +#include <linux/regmap.h>
    >    >> +#include <linux/bitfield.h>
    >    >> +#include <linux/slab.h>
    >    >> +#include <linux/pwm.h>
    >    >> +#include <linux/math64.h>
    >    >> +
    >    >> +/* The channel number of Aspeed pwm controller */
    >    >> +#define PWM_ASPEED_NR_PWMS 16
    >    >> +
    >    >> +/* PWM Control Register */
    >    >> +#define PWM_ASPEED_CTRL(ch) ((ch) * 0x10 + 0x00)
    >    >> +#define PWM_ASPEED_CTRL_LOAD_SEL_RISING_AS_WDT BIT(19)
    >    >> +#define PWM_ASPEED_CTRL_DUTY_LOAD_AS_WDT_ENABLE BIT(18)
    >    >> +#define PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE BIT(17)
    >    >> +#define PWM_ASPEED_CTRL_CLK_ENABLE BIT(16)
    >    >> +#define PWM_ASPEED_CTRL_LEVEL_OUTPUT BIT(15)
    >    >> +#define PWM_ASPEED_CTRL_INVERSE BIT(14)
    >    >> +#define PWM_ASPEED_CTRL_OPEN_DRAIN_ENABLE BIT(13)
    >    >> +#define PWM_ASPEED_CTRL_PIN_ENABLE BIT(12)
    >    >> +#define PWM_ASPEED_CTRL_CLK_DIV_H GENMASK(11, 8)
    >    >> +#define PWM_ASPEED_CTRL_CLK_DIV_L GENMASK(7, 0)
    >    >> +
    >    >> +/* PWM Duty Cycle Register */
    >    >> +#define PWM_ASPEED_DUTY_CYCLE(ch) ((ch) * 0x10 + 0x04)
    >    >> +#define PWM_ASPEED_DUTY_CYCLE_PERIOD GENMASK(31, 24)
    >    >> +#define PWM_ASPEED_DUTY_CYCLE_POINT_AS_WDT GENMASK(23, 16)
    >    >> +#define PWM_ASPEED_DUTY_CYCLE_FALLING_POINT GENMASK(15, 8)
    >    >> +#define PWM_ASPEED_DUTY_CYCLE_RISING_POINT GENMASK(7, 0)
    >    >> +
    >    >> +/* PWM fixed value */
    >    >> +#define PWM_ASPEED_FIXED_PERIOD FIELD_MAX(PWM_ASPEED_DUTY_CYCLE_PERIOD)
    >    >> +
    >    >> +struct aspeed_pwm_data {
    >    >> +	struct pwm_chip chip;
    >    >> +	struct clk *clk;
    >    >> +	struct regmap *regmap;
    >    >> +	struct reset_control *reset;
    >    >> +};
    >    >> +
    >    >> +static inline struct aspeed_pwm_data *
    >    >> +aspeed_pwm_chip_to_data(struct pwm_chip *chip)
    >    >> +{
    >    >> +	return container_of(chip, struct aspeed_pwm_data, chip);
    >    >> +}
    >    >> +
    >    >> +static void aspeed_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
    >    >> +				 struct pwm_state *state)
    >    >> +{
    >    >> +	struct device *dev = chip->dev;
    >    >> +	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
    >    >> +	u32 index = pwm->hwpwm;
    >    >> +	bool polarity, ch_en, clk_en;
    >    >> +	u32 duty_pt, val;
    >    >> +	unsigned long rate;
    >    >> +	u64 div_h, div_l, clk_period;
    >    >> +
    >    >> +	regmap_read(priv->regmap, PWM_ASPEED_CTRL(index), &val);
    >    >> +	polarity = FIELD_GET(PWM_ASPEED_CTRL_INVERSE, val);
    >    >> +	ch_en = FIELD_GET(PWM_ASPEED_CTRL_PIN_ENABLE, val);
    >    >> +	clk_en = FIELD_GET(PWM_ASPEED_CTRL_CLK_ENABLE, val);
    >    >> +	div_h = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_H, val);
    >    >> +	div_l = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_L, val);
    >    >> +	regmap_read(priv->regmap, PWM_ASPEED_DUTY_CYCLE(index), &val);
    >    >> +	duty_pt = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT, val);
    >    >> +	clk_period = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_PERIOD, val);
    >    >> +
    >    >> +	rate = clk_get_rate(priv->clk);
    >    >> +	state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * _BITULL(div_h) *
    >    >> +						 (div_l + 1) * (clk_period + 1),
    >    >> +					 rate);

    >    > Instead of _BITULL(div_h) you can just do << div_h, which reads a bit
    >    > easier.

    >Okay, I will send patch v9 to fix it.

    >    > The multiplication can be up to:

    >    >	100000000 * (1 << 31) * (31 + 1) * (255 + 1)

    >    > right? This needs 71 bits and so might overflow a u64.

    >No, the multiplication can be up to:

    >Max(div_h) = 15
    >Max(div_l) = 255
    >Max(clk_period) = 255
    >1000000000 * (1 << 15) * (255 + 1) * (255 + 1) < 2^64 - 1
    >it doesn't overflow a u64.

    >    > I guess to prevent that you have to do something like SH_DIV does for a
    >    > u32 division:

    >    >	u64 rem;

    >    >	/*
    >    >	 * To calculate
    >    >	 *
    >    >	 *   roundup(NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) << div_h / rate)
    >    >	 *
    >    >	 * we have to jump through some hoops because the numerator
    >    >	 * might not fit into a u64. So calculate:
    >    >	 *
    >    >	 *   roundup(NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) / rate) << div_h
    >    >	 *
    >    >	 * and fixup for the imprecision.
    >    >	 */
    >    >	nom = (u64)NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) + (rate - 1);
    >    >	rem = do_div(nom, rate);
    >    >	state->period = nom << div_h + DIV_ROUND_DOWN_ULL(rem << div_h + (rate >> 1), rate);

    >    > You might want to double check my math here, I didn't invest the time to
    >    > verify myself that this is sensible but just quickly combined SH_DIV and
    >    > DIV_ROUND_UP_ULL.

    >    >> +	if (clk_en && duty_pt)
    >    >> +		state->duty_cycle = DIV_ROUND_UP_ULL(
    >    >> +			state->period * duty_pt, clk_period + 1);

    >    > You're loosing precision here. You have to repeat the hoop jumping from
    >    > above to fix.

    >I will use your method to fix it.
    >Thanks

I found that I don't need to use SH_DIV here.
duty_cycle = (period * duty_pt)/(clk_period + 1)
period = (NSEC_PER_SEC * (div_l + 1) * (clk_period + 1) << div_h) / rate
So the duty_cycle = ((NSEC_PER_SEC * (div_l + 1) << div_h) * duty_pt) / rate.
And the max(duty_pt) = 255
((NSEC_PER_SEC * (div_l + 1) << div_h) * duty_pt) < 2^64 - 1.
it doesn't overflow a u64.

    >    > +	else
    >    > +		state->duty_cycle = clk_en ? state->period : 0;
    >    > +	state->polarity = polarity;
    >    > +	state->enabled = ch_en;
    >    > +	dev_dbg(dev, "get period: %lldns, duty_cycle: %lldns", state->period,
    >    > +		state->duty_cycle);
    >    > +}
    >    > +
    >    > +static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
    >    > +			    const struct pwm_state *state)
    >    > +{
    >    > +	struct device *dev = chip->dev;
    >    > +	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
    >    > +	u32 index = pwm->hwpwm, duty_pt;
    >    > +	unsigned long rate;
    >    > +	u64 div_h, div_l, divisor;
    >    > +	bool clk_en;
    >    > +
    >    > +	dev_dbg(dev, "expect period: %lldns, duty_cycle: %lldns", state->period,
    >    > +		state->duty_cycle);
    >    > +
    >    > +	rate = clk_get_rate(priv->clk);
    >    > +	/*
    >    > +	 * Pick the smallest value for div_h so that div_l can be the biggest
    >    > +	 * which results in a finer resolution near the target period value.
    >    > +	 */
    >    > +	divisor = (u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1) *
    >    > +		  (FIELD_MAX(PWM_ASPEED_CTRL_CLK_DIV_L) + 1);
    >    > +	div_h = order_base_2(DIV64_U64_ROUND_UP(rate * state->period, divisor));
    >    > +	if (div_h > 0xf)
    >    > +		div_h = 0xf;
    >    > +
    >    > +	divisor = ((u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1)) << div_h;
    >    > +	div_l = div64_u64(rate * state->period, divisor);
    >    > +
    >    > +	if (div_l == 0)
    >    > +		return -ERANGE;
    >    > +
    >    > +	div_l -= 1;
    >    > +
    >    > +	if (div_l > 255)
    >    > +		div_l = 255;

    >    > I already checked that in the previous round, I assume that's fine now.
diff mbox series

Patch

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 63be5362fd3a..a5aac3ca4ac7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -51,6 +51,15 @@  config PWM_AB8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-ab8500.
 
+config PWM_ASPEED_AST2600
+	tristate "Aspeed ast2600 PWM support"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	help
+	  This driver provides support for Aspeed ast2600 PWM controllers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-aspeed-ast2600.
+
 config PWM_ATMEL
 	tristate "Atmel PWM support"
 	depends on OF
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index cbdcd55d69ee..ada454f9129a 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -2,6 +2,7 @@ 
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
 obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_ASPEED_AST2600)	+= pwm-aspeed-ast2600.o
 obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
 obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
 obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
diff --git a/drivers/pwm/pwm-aspeed-ast2600.c b/drivers/pwm/pwm-aspeed-ast2600.c
new file mode 100644
index 000000000000..6ea0f7eb311f
--- /dev/null
+++ b/drivers/pwm/pwm-aspeed-ast2600.c
@@ -0,0 +1,311 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 Aspeed Technology Inc.
+ *
+ * PWM controller driver for Aspeed ast2600 SoCs.
+ * This drivers doesn't support earlier version of the IP.
+ *
+ * The formula of pwm period duration:
+ * period duration = ((DIV_L + 1) * BIT(DIV_H) * (PERIOD + 1)) / input-clk
+ *
+ * The software driver fixes the period to 255, which causes the high-frequency
+ * precision of the PWM to be coarse, in exchange for the fineness of the duty cycle.
+ *
+ * Register usage:
+ * PIN_ENABLE: When it is unset the pwm controller will always output low to the extern.
+ * Use to determine whether the PWM channel is enabled or disabled
+ * CLK_ENABLE: When it is unset the pwm controller will reset the duty counter to 0 and
+ * output low to the PIN_ENABLE mux after that the driver can still change the pwm period
+ * and duty and the value will apply when CLK_ENABLE be set again.
+ * Use to determine whether duty_cycle bigger than 0.
+ * PWM_ASPEED_CTRL_INVERSE: When it is toggled the output value will inverse immediately.
+ * PWM_ASPEED_DUTY_CYCLE_FALLING_POINT/PWM_ASPEED_DUTY_CYCLE_RISING_POINT: When these two
+ * values are equal it means the duty cycle = 100%.
+ *
+ * Limitations:
+ * - When changing both duty cycle and period, we cannot prevent in
+ *   software that the output might produce a period with mixed
+ *   settings.
+ * - Disabling the PWM doesn't complete the current period.
+ *
+ * Improvements:
+ * - When only changing one of duty cycle or period, our pwm controller will not
+ *   generate the glitch, the configure will change at next cycle of pwm.
+ *   This improvement can disable/enable through PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sysfs.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+#include <linux/slab.h>
+#include <linux/pwm.h>
+#include <linux/math64.h>
+
+/* The channel number of Aspeed pwm controller */
+#define PWM_ASPEED_NR_PWMS 16
+
+/* PWM Control Register */
+#define PWM_ASPEED_CTRL(ch) ((ch) * 0x10 + 0x00)
+#define PWM_ASPEED_CTRL_LOAD_SEL_RISING_AS_WDT BIT(19)
+#define PWM_ASPEED_CTRL_DUTY_LOAD_AS_WDT_ENABLE BIT(18)
+#define PWM_ASPEED_CTRL_DUTY_SYNC_DISABLE BIT(17)
+#define PWM_ASPEED_CTRL_CLK_ENABLE BIT(16)
+#define PWM_ASPEED_CTRL_LEVEL_OUTPUT BIT(15)
+#define PWM_ASPEED_CTRL_INVERSE BIT(14)
+#define PWM_ASPEED_CTRL_OPEN_DRAIN_ENABLE BIT(13)
+#define PWM_ASPEED_CTRL_PIN_ENABLE BIT(12)
+#define PWM_ASPEED_CTRL_CLK_DIV_H GENMASK(11, 8)
+#define PWM_ASPEED_CTRL_CLK_DIV_L GENMASK(7, 0)
+
+/* PWM Duty Cycle Register */
+#define PWM_ASPEED_DUTY_CYCLE(ch) ((ch) * 0x10 + 0x04)
+#define PWM_ASPEED_DUTY_CYCLE_PERIOD GENMASK(31, 24)
+#define PWM_ASPEED_DUTY_CYCLE_POINT_AS_WDT GENMASK(23, 16)
+#define PWM_ASPEED_DUTY_CYCLE_FALLING_POINT GENMASK(15, 8)
+#define PWM_ASPEED_DUTY_CYCLE_RISING_POINT GENMASK(7, 0)
+
+/* PWM fixed value */
+#define PWM_ASPEED_FIXED_PERIOD FIELD_MAX(PWM_ASPEED_DUTY_CYCLE_PERIOD)
+
+struct aspeed_pwm_data {
+	struct pwm_chip chip;
+	struct clk *clk;
+	struct regmap *regmap;
+	struct reset_control *reset;
+};
+
+static inline struct aspeed_pwm_data *
+aspeed_pwm_chip_to_data(struct pwm_chip *chip)
+{
+	return container_of(chip, struct aspeed_pwm_data, chip);
+}
+
+static void aspeed_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct device *dev = chip->dev;
+	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
+	u32 index = pwm->hwpwm;
+	bool polarity, ch_en, clk_en;
+	u32 duty_pt, val;
+	unsigned long rate;
+	u64 div_h, div_l, clk_period;
+
+	regmap_read(priv->regmap, PWM_ASPEED_CTRL(index), &val);
+	polarity = FIELD_GET(PWM_ASPEED_CTRL_INVERSE, val);
+	ch_en = FIELD_GET(PWM_ASPEED_CTRL_PIN_ENABLE, val);
+	clk_en = FIELD_GET(PWM_ASPEED_CTRL_CLK_ENABLE, val);
+	div_h = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_H, val);
+	div_l = FIELD_GET(PWM_ASPEED_CTRL_CLK_DIV_L, val);
+	regmap_read(priv->regmap, PWM_ASPEED_DUTY_CYCLE(index), &val);
+	duty_pt = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT, val);
+	clk_period = FIELD_GET(PWM_ASPEED_DUTY_CYCLE_PERIOD, val);
+
+	rate = clk_get_rate(priv->clk);
+	state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * _BITULL(div_h) *
+						 (div_l + 1) * (clk_period + 1),
+					 rate);
+
+	if (clk_en && duty_pt)
+		state->duty_cycle = DIV_ROUND_UP_ULL(
+			state->period * duty_pt, clk_period + 1);
+	else
+		state->duty_cycle = clk_en ? state->period : 0;
+	state->polarity = polarity;
+	state->enabled = ch_en;
+	dev_dbg(dev, "get period: %lldns, duty_cycle: %lldns", state->period,
+		state->duty_cycle);
+}
+
+static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct device *dev = chip->dev;
+	struct aspeed_pwm_data *priv = aspeed_pwm_chip_to_data(chip);
+	u32 index = pwm->hwpwm, duty_pt;
+	unsigned long rate;
+	u64 div_h, div_l, divisor;
+	bool clk_en;
+
+	dev_dbg(dev, "expect period: %lldns, duty_cycle: %lldns", state->period,
+		state->duty_cycle);
+
+	rate = clk_get_rate(priv->clk);
+	/*
+	 * Pick the smallest value for div_h so that div_l can be the biggest
+	 * which results in a finer resolution near the target period value.
+	 */
+	divisor = (u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1) *
+		  (FIELD_MAX(PWM_ASPEED_CTRL_CLK_DIV_L) + 1);
+	div_h = order_base_2(DIV64_U64_ROUND_UP(rate * state->period, divisor));
+	if (div_h > 0xf)
+		div_h = 0xf;
+
+	divisor = ((u64)NSEC_PER_SEC * (PWM_ASPEED_FIXED_PERIOD + 1)) << div_h;
+	div_l = div64_u64(rate * state->period, divisor);
+
+	if (div_l == 0)
+		return -ERANGE;
+
+	div_l -= 1;
+
+	if (div_l > 255)
+		div_l = 255;
+
+	dev_dbg(dev, "clk source: %ld div_h %lld, div_l : %lld\n", rate, div_h,
+		div_l);
+	/* duty_pt = duty_cycle * (PERIOD + 1) / period */
+	duty_pt = div64_u64(state->duty_cycle * rate,
+			    (u64)NSEC_PER_SEC * _BITULL(div_h) * (div_l + 1));
+	dev_dbg(dev, "duty_cycle = %lld, duty_pt = %d\n", state->duty_cycle,
+		 duty_pt);
+
+	regmap_update_bits(priv->regmap, PWM_ASPEED_CTRL(index),
+			   PWM_ASPEED_CTRL_PIN_ENABLE,
+			   state->enabled ? PWM_ASPEED_CTRL_PIN_ENABLE : 0);
+
+	if (duty_pt == 0)
+		clk_en = 0;
+	else {
+		clk_en = 1;
+		if (duty_pt >= (PWM_ASPEED_FIXED_PERIOD + 1))
+			duty_pt = 0;
+		/*
+		 * Fixed DUTY_CYCLE_PERIOD to its max value to get a
+		 * fine-grained resolution for duty_cycle at the expense of a
+		 * coarser period resolution.
+		 */
+		regmap_update_bits(priv->regmap, PWM_ASPEED_DUTY_CYCLE(index),
+				PWM_ASPEED_DUTY_CYCLE_PERIOD |
+				PWM_ASPEED_DUTY_CYCLE_RISING_POINT |
+				PWM_ASPEED_DUTY_CYCLE_FALLING_POINT,
+				FIELD_PREP(PWM_ASPEED_DUTY_CYCLE_PERIOD,
+					PWM_ASPEED_FIXED_PERIOD) |
+				FIELD_PREP(PWM_ASPEED_DUTY_CYCLE_FALLING_POINT,
+				   duty_pt));
+	}
+
+	regmap_update_bits(priv->regmap, PWM_ASPEED_CTRL(index),
+			   PWM_ASPEED_CTRL_CLK_DIV_H |
+			   PWM_ASPEED_CTRL_CLK_DIV_L |
+			   PWM_ASPEED_CTRL_CLK_ENABLE |
+			   PWM_ASPEED_CTRL_INVERSE,
+			   FIELD_PREP(PWM_ASPEED_CTRL_CLK_DIV_H, div_h) |
+			   FIELD_PREP(PWM_ASPEED_CTRL_CLK_DIV_L, div_l) |
+			   FIELD_PREP(PWM_ASPEED_CTRL_CLK_ENABLE, clk_en) |
+			   FIELD_PREP(PWM_ASPEED_CTRL_INVERSE,
+			   state->polarity));
+	return 0;
+}
+
+static const struct pwm_ops aspeed_pwm_ops = {
+	.apply = aspeed_pwm_apply,
+	.get_state = aspeed_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int aspeed_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+	struct aspeed_pwm_data *priv;
+	struct device_node *np;
+	struct platform_device *parent_dev;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	np = pdev->dev.parent->of_node;
+	if (!of_device_is_compatible(np, "aspeed,ast2600-pwm-tach"))
+		return dev_err_probe(dev, -ENODEV,
+				     "unsupported pwm device binding\n");
+
+	priv->regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(priv->regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->regmap),
+				     "couldn't get regmap\n");
+
+	parent_dev = of_find_device_by_node(np);
+	priv->clk = devm_clk_get(&parent_dev->dev, 0);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
+				     "couldn't get clock\n");
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "couldn't enable clock\n");
+
+	priv->reset = devm_reset_control_get_shared(&parent_dev->dev, NULL);
+	if (IS_ERR(priv->reset)) {
+		ret = dev_err_probe(dev, PTR_ERR(priv->reset),
+				    "get reset failed\n");
+		goto err_disable_clk;
+	}
+	ret = reset_control_deassert(priv->reset);
+	if (ret) {
+		dev_err_probe(dev, ret, "cannot deassert reset control\n");
+		goto err_disable_clk;
+	}
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &aspeed_pwm_ops;
+	priv->chip.npwm = PWM_ASPEED_NR_PWMS;
+
+	ret = pwmchip_add(&priv->chip);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "failed to add PWM chip\n");
+		goto err_assert_reset;
+	}
+	dev_set_drvdata(dev, priv);
+	return 0;
+err_assert_reset:
+	reset_control_assert(priv->reset);
+err_disable_clk:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int aspeed_pwm_remove(struct platform_device *dev)
+{
+	struct aspeed_pwm_data *priv = platform_get_drvdata(dev);
+
+	pwmchip_remove(&priv->chip);
+	reset_control_assert(priv->reset);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id of_pwm_match_table[] = {
+	{
+		.compatible = "aspeed,ast2600-pwm",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pwm_match_table);
+
+static struct platform_driver aspeed_pwm_driver = {
+	.probe = aspeed_pwm_probe,
+	.remove	= aspeed_pwm_remove,
+	.driver	= {
+		.name = "aspeed-pwm",
+		.of_match_table = of_pwm_match_table,
+	},
+};
+
+module_platform_driver(aspeed_pwm_driver);
+
+MODULE_AUTHOR("Billy Tsai <billy_tsai@aspeedtech.com>");
+MODULE_DESCRIPTION("Aspeed ast2600 PWM device driver");
+MODULE_LICENSE("GPL v2");