diff mbox series

[v3,3/6] dt-bindings: media: mt9p031: Add missing required properties

Message ID 20210702095922.118614-4-s.riedmueller@phytec.de (mailing list archive)
State New, archived
Headers show
Series media: mt9p031: Read back the real clock rate | expand

Commit Message

Stefan Riedmüller July 2, 2021, 9:59 a.m. UTC 
Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 .../devicetree/bindings/media/i2c/mt9p031.txt        | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Laurent Pinchart July 2, 2021, 1:15 p.m. UTC | #1 
Hi Stefan,

Thank you for the patch.

On Fri, Jul 02, 2021 at 11:59:19AM +0200, Stefan Riedmueller wrote:
> Add missing required clocks and supply regulator properties for the
> sensor input clock and vdd, vdd_io and vaa supply regulators.

Can I volunteer you to convert these bindings to YAML first, and add the
properties on top ? :-)

> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
>  .../devicetree/bindings/media/i2c/mt9p031.txt        | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> index cb60443ff78f..4437d0e3147d 100644
> --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> @@ -9,6 +9,12 @@ Required Properties:
>  	(a) "aptina,mt9p031" for mt9p031 sensor
>  	(b) "aptina,mt9p031m" for mt9p031m sensor
>  
> +- clocks: Reference to the sensor input clock
> +
> +- vdd-supply: VDD supply regulator
> +- vdd_io-supply: VDD_IO supply regulator
> +- vaa-supply: VAA supply regulator
> +
>  - input-clock-frequency: Input clock frequency.
>  
>  - pixel-clock-frequency: Pixel clock frequency.
> @@ -29,6 +35,12 @@ Example:
>  			reg = <0x5d>;
>  			reset-gpios = <&gpio3 30 0>;
>  
> +			clocks = <&sensor_clk>;
> +
> +			vdd-supply = <&reg_vdd>;
> +			vdd_io-supply = <&reg_vdd_io>;
> +			vaa-supply = <&reg_vaa>;
> +
>  			port {
>  				mt9p031_1: endpoint {
>  					input-clock-frequency = <6000000>;
Stefan Riedmüller July 5, 2021, 3 p.m. UTC | #2 
Hi Laurent,

On Fri, 2021-07-02 at 16:15 +0300, Laurent Pinchart wrote:
> Hi Stefan,
> 
> Thank you for the patch.
> 
> On Fri, Jul 02, 2021 at 11:59:19AM +0200, Stefan Riedmueller wrote:
> > Add missing required clocks and supply regulator properties for the
> > sensor input clock and vdd, vdd_io and vaa supply regulators.
> 
> Can I volunteer you to convert these bindings to YAML first, and add the
> properties on top ? :-)

Sure, I can give it a try :-)

Regards,
Stefan

> 
> > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> > ---
> >  .../devicetree/bindings/media/i2c/mt9p031.txt        | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> > b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> > index cb60443ff78f..4437d0e3147d 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> > +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> > @@ -9,6 +9,12 @@ Required Properties:
> >  	(a) "aptina,mt9p031" for mt9p031 sensor
> >  	(b) "aptina,mt9p031m" for mt9p031m sensor
> >  
> > +- clocks: Reference to the sensor input clock
> > +
> > +- vdd-supply: VDD supply regulator
> > +- vdd_io-supply: VDD_IO supply regulator
> > +- vaa-supply: VAA supply regulator
> > +
> >  - input-clock-frequency: Input clock frequency.
> >  
> >  - pixel-clock-frequency: Pixel clock frequency.
> > @@ -29,6 +35,12 @@ Example:
> >  			reg = <0x5d>;
> >  			reset-gpios = <&gpio3 30 0>;
> >  
> > +			clocks = <&sensor_clk>;
> > +
> > +			vdd-supply = <&reg_vdd>;
> > +			vdd_io-supply = <&reg_vdd_io>;
> > +			vaa-supply = <&reg_vaa>;
> > +
> >  			port {
> >  				mt9p031_1: endpoint {
> >  					input-clock-frequency = <6000000>;
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
index cb60443ff78f..4437d0e3147d 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
@@ -9,6 +9,12 @@  Required Properties:
 	(a) "aptina,mt9p031" for mt9p031 sensor
 	(b) "aptina,mt9p031m" for mt9p031m sensor
 
+- clocks: Reference to the sensor input clock
+
+- vdd-supply: VDD supply regulator
+- vdd_io-supply: VDD_IO supply regulator
+- vaa-supply: VAA supply regulator
+
 - input-clock-frequency: Input clock frequency.
 
 - pixel-clock-frequency: Pixel clock frequency.
@@ -29,6 +35,12 @@  Example:
 			reg = <0x5d>;
 			reset-gpios = <&gpio3 30 0>;
 
+			clocks = <&sensor_clk>;
+
+			vdd-supply = <&reg_vdd>;
+			vdd_io-supply = <&reg_vdd_io>;
+			vaa-supply = <&reg_vaa>;
+
 			port {
 				mt9p031_1: endpoint {
 					input-clock-frequency = <6000000>;