Message ID | 20210705113104.579535-3-claudiu.beznea@microchip.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | mfd: atmel-flexcom: add a fix and code cosmetics | expand |
On 05.07.2021 14:31, Claudiu Beznea wrote: > Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation > mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might > be connected critical devices (like PMIC) which on suspend/resume should > be suspended/resumed at the end/beginning. i2c uses > .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom > to use .resume_noirq as it should be resumed before the embedded IPs. > Otherwise the embedded devices might behave badly. > > Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset") > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
On 05/07/2021 at 13:31, Claudiu Beznea wrote: > Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation > mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might > be connected critical devices (like PMIC) which on suspend/resume should > be suspended/resumed at the end/beginning. i2c uses > .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom > to use .resume_noirq as it should be resumed before the embedded IPs. > Otherwise the embedded devices might behave badly. > > Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset") > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Thanks Claudiu, best regards, Nicolas > --- > drivers/mfd/atmel-flexcom.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c > index 962f66dc8813..559eb4d352b6 100644 > --- a/drivers/mfd/atmel-flexcom.c > +++ b/drivers/mfd/atmel-flexcom.c > @@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match); > > -static int __maybe_unused atmel_flexcom_resume(struct device *dev) > +static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev) > { > struct atmel_flexcom *ddata = dev_get_drvdata(dev); > int err; > @@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev) > return 0; > } > > -static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL, > - atmel_flexcom_resume); > +static const struct dev_pm_ops atmel_flexcom_pm_ops = { > + .resume_noirq = atmel_flexcom_resume_noirq, > +}; > > static struct platform_driver atmel_flexcom_driver = { > .probe = atmel_flexcom_probe, >
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c index 962f66dc8813..559eb4d352b6 100644 --- a/drivers/mfd/atmel-flexcom.c +++ b/drivers/mfd/atmel-flexcom.c @@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = { }; MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match); -static int __maybe_unused atmel_flexcom_resume(struct device *dev) +static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev) { struct atmel_flexcom *ddata = dev_get_drvdata(dev); int err; @@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL, - atmel_flexcom_resume); +static const struct dev_pm_ops atmel_flexcom_pm_ops = { + .resume_noirq = atmel_flexcom_resume_noirq, +}; static struct platform_driver atmel_flexcom_driver = { .probe = atmel_flexcom_probe,
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might be connected critical devices (like PMIC) which on suspend/resume should be suspended/resumed at the end/beginning. i2c uses .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom to use .resume_noirq as it should be resumed before the embedded IPs. Otherwise the embedded devices might behave badly. Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- drivers/mfd/atmel-flexcom.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)