Message ID | 1617809456-17693-9-git-send-email-yibin.gong@nxp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | add ecspi ERR009165 for i.mx6/7 soc family | expand |
Am Mittwoch, dem 07.04.2021 um 23:30 +0800 schrieb Robin Gong: > ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and > i.mx8m/8mm still need this errata. Please refer to nxp official > errata document from https://www.nxp.com/ . > > For removing workaround on those chips. Add new i.mx6ul type. > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> > Acked-by: Mark Brown <broonie@kernel.org> > --- > drivers/spi/spi-imx.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 43 insertions(+), 4 deletions(-) > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c > index cf235b9..d18ee25 100644 > --- a/drivers/spi/spi-imx.c > +++ b/drivers/spi/spi-imx.c > @@ -59,6 +59,7 @@ enum spi_imx_devtype { > IMX35_CSPI, /* CSPI on all i.mx except above */ > IMX51_ECSPI, /* ECSPI on i.mx51 */ > IMX53_ECSPI, /* ECSPI on i.mx53 and later */ > + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ This patch could be a lot smaller if you didn't introduce a new devtype. You could just use the IMX51_ECSPI in imx6ul_ecspi_devtype_data, as all you care about as a relevant difference is the tx_glitch_fixed property, which isn't tied to the devtype. Regards, Lucas > }; > > struct spi_imx_data; > @@ -78,6 +79,11 @@ struct spi_imx_devtype_data { > bool has_slavemode; > unsigned int fifo_size; > bool dynamic_burst; > + /* > + * ERR009165 fixed or not: > + * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf > + */ > + bool tx_glitch_fixed; > enum spi_imx_devtype devtype; > }; > > @@ -134,6 +140,11 @@ static inline int is_imx51_ecspi(struct spi_imx_data *d) > return d->devtype_data->devtype == IMX51_ECSPI; > } > > +static inline int is_imx6ul_ecspi(struct spi_imx_data *d) > +{ > + return d->devtype_data->devtype == IMX6UL_ECSPI; > +} > + > static inline int is_imx53_ecspi(struct spi_imx_data *d) > { > return d->devtype_data->devtype == IMX53_ECSPI; > @@ -593,8 +604,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > spi_imx->spi_bus_clk = clk; > > - /* ERR009165: work in XHC mode as PIO */ > - ctrl &= ~MX51_ECSPI_CTRL_SMC; > + /* > + * ERR009165: work in XHC mode instead of SMC as PIO on the chips > + * before i.mx6ul. > + */ > + if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed) > + ctrl |= MX51_ECSPI_CTRL_SMC; > + else > + ctrl &= ~MX51_ECSPI_CTRL_SMC; > > writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); > > @@ -620,12 +637,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > > static void mx51_setup_wml(struct spi_imx_data *spi_imx) > { > + u32 tx_wml = 0; > + > + if (spi_imx->devtype_data->tx_glitch_fixed) > + tx_wml = spi_imx->wml; > /* > * Configure the DMA register: setup the watermark > * and enable DMA request. > */ > writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | > - MX51_ECSPI_DMA_TX_WML(0) | > + MX51_ECSPI_DMA_TX_WML(tx_wml) | > MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | > MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | > MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); > @@ -1019,6 +1040,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = { > .devtype = IMX53_ECSPI, > }; > > +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { > + .intctrl = mx51_ecspi_intctrl, > + .prepare_message = mx51_ecspi_prepare_message, > + .prepare_transfer = mx51_ecspi_prepare_transfer, > + .trigger = mx51_ecspi_trigger, > + .rx_available = mx51_ecspi_rx_available, > + .reset = mx51_ecspi_reset, > + .setup_wml = mx51_setup_wml, > + .fifo_size = 64, > + .has_dmamode = true, > + .dynamic_burst = true, > + .has_slavemode = true, > + .tx_glitch_fixed = true, > + .disable = mx51_ecspi_disable, > + .devtype = IMX6UL_ECSPI, > +}; > + > static const struct of_device_id spi_imx_dt_ids[] = { > { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, > { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, }, > @@ -1027,6 +1065,7 @@ static const struct of_device_id spi_imx_dt_ids[] = { > { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, > { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, > { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, }, > + { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); > @@ -1604,7 +1643,7 @@ static int spi_imx_probe(struct platform_device *pdev) > spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ > | SPI_NO_CS; > if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || > - is_imx53_ecspi(spi_imx)) > + is_imx53_ecspi(spi_imx) || is_imx6ul_ecspi(spi_imx)) > spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; > > spi_imx->spi_drctl = spi_drctl;
On 09/07/21 17:42 Lucas Stach <l.stach@pengutronix.de> wrote: > Am Mittwoch, dem 07.04.2021 um 23:30 +0800 schrieb Robin Gong: > > ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and i.mx8m/8mm > > still need this errata. Please refer to nxp official errata document > > from > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n > xp.com%2F&data=04%7C01%7Cyibin.gong%40nxp.com%7C48156bc93d > c84ac26e9d08d942bdc0ac%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0% > 7C1%7C637614205017900475%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4 > wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&a > mp;sdata=keYQubzt1jWrKhaxXr40RL41vzFuIn7x1Sasa3p%2F9Xo%3D&res > erved=0 . > > > > For removing workaround on those chips. Add new i.mx6ul type. > > > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> > > Acked-by: Mark Brown <broonie@kernel.org> > > --- > > drivers/spi/spi-imx.c | 47 > > +++++++++++++++++++++++++++++++++++++++++++---- > > 1 file changed, 43 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index > > cf235b9..d18ee25 100644 > > --- a/drivers/spi/spi-imx.c > > +++ b/drivers/spi/spi-imx.c > > @@ -59,6 +59,7 @@ enum spi_imx_devtype { > > IMX35_CSPI, /* CSPI on all i.mx except above */ > > IMX51_ECSPI, /* ECSPI on i.mx51 */ > > IMX53_ECSPI, /* ECSPI on i.mx53 and later */ > > + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ > > This patch could be a lot smaller if you didn't introduce a new devtype. You > could just use the IMX51_ECSPI in imx6ul_ecspi_devtype_data, as all you care > about as a relevant difference is the tx_glitch_fixed property, which isn't tied > to the devtype. I knew tx_glitch_fixed was enough but I still prefer to add new 'IMX6UL_ECSPI' because we can clearly choose the right IP which has fix the issue while legacy IMX51 if it's not fixed by dts. > > }; > > > > struct spi_imx_data; > > @@ -78,6 +79,11 @@ struct spi_imx_devtype_data { > > bool has_slavemode; > > unsigned int fifo_size; > > bool dynamic_burst; > > + /* > > + * ERR009165 fixed or not: > > + * > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n > xp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=04%7C01%7C > yibin.gong%40nxp.com%7C48156bc93dc84ac26e9d08d942bdc0ac%7C686ea > 1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637614205017900475%7CU > nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6 > Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=J9iZb93uN1VEriN%2F2GAE > TWxdv4n%2FD6ZXteMCFkB8KHM%3D&reserved=0 > > + */ > > + bool tx_glitch_fixed; > > enum spi_imx_devtype devtype; > > }; > > > > @@ -134,6 +140,11 @@ static inline int is_imx51_ecspi(struct spi_imx_data > *d) > > return d->devtype_data->devtype == IMX51_ECSPI; } > > > > +static inline int is_imx6ul_ecspi(struct spi_imx_data *d) { > > + return d->devtype_data->devtype == IMX6UL_ECSPI; } > > + > > static inline int is_imx53_ecspi(struct spi_imx_data *d) { > > return d->devtype_data->devtype == IMX53_ECSPI; @@ -593,8 +604,14 > @@ > > static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > > spi_imx->spi_bus_clk = clk; > > > > - /* ERR009165: work in XHC mode as PIO */ > > - ctrl &= ~MX51_ECSPI_CTRL_SMC; > > + /* > > + * ERR009165: work in XHC mode instead of SMC as PIO on the chips > > + * before i.mx6ul. > > + */ > > + if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed) > > + ctrl |= MX51_ECSPI_CTRL_SMC; > > + else > > + ctrl &= ~MX51_ECSPI_CTRL_SMC; > > > > writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); > > > > @@ -620,12 +637,16 @@ static int mx51_ecspi_prepare_transfer(struct > > spi_imx_data *spi_imx, > > > > static void mx51_setup_wml(struct spi_imx_data *spi_imx) { > > + u32 tx_wml = 0; > > + > > + if (spi_imx->devtype_data->tx_glitch_fixed) > > + tx_wml = spi_imx->wml; > > /* > > * Configure the DMA register: setup the watermark > > * and enable DMA request. > > */ > > writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | > > - MX51_ECSPI_DMA_TX_WML(0) | > > + MX51_ECSPI_DMA_TX_WML(tx_wml) | > > MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | > > MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | > > MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); > @@ -1019,6 > > +1040,23 @@ static struct spi_imx_devtype_data > imx53_ecspi_devtype_data = { > > .devtype = IMX53_ECSPI, > > }; > > > > +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { > > + .intctrl = mx51_ecspi_intctrl, > > + .prepare_message = mx51_ecspi_prepare_message, > > + .prepare_transfer = mx51_ecspi_prepare_transfer, > > + .trigger = mx51_ecspi_trigger, > > + .rx_available = mx51_ecspi_rx_available, > > + .reset = mx51_ecspi_reset, > > + .setup_wml = mx51_setup_wml, > > + .fifo_size = 64, > > + .has_dmamode = true, > > + .dynamic_burst = true, > > + .has_slavemode = true, > > + .tx_glitch_fixed = true, > > + .disable = mx51_ecspi_disable, > > + .devtype = IMX6UL_ECSPI, > > +}; > > + > > static const struct of_device_id spi_imx_dt_ids[] = { > > { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, > > { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, > > }, @@ -1027,6 +1065,7 @@ static const struct of_device_id spi_imx_dt_ids[] > = { > > { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, > > { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, > > { .compatible = "fsl,imx53-ecspi", .data = > > &imx53_ecspi_devtype_data, }, > > + { .compatible = "fsl,imx6ul-ecspi", .data = > > +&imx6ul_ecspi_devtype_data, }, > > { /* sentinel */ } > > }; > > MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); @@ -1604,7 +1643,7 @@ > static > > int spi_imx_probe(struct platform_device *pdev) > > spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | > SPI_CS_HIGH \ > > | SPI_NO_CS; > > if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || > > - is_imx53_ecspi(spi_imx)) > > + is_imx53_ecspi(spi_imx) || is_imx6ul_ecspi(spi_imx)) > > spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; > > > > spi_imx->spi_drctl = spi_drctl; >
Am Montag, dem 12.07.2021 um 03:48 +0000 schrieb Robin Gong: > On 09/07/21 17:42 Lucas Stach <l.stach@pengutronix.de> wrote: > > Am Mittwoch, dem 07.04.2021 um 23:30 +0800 schrieb Robin Gong: > > > ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and i.mx8m/8mm > > > still need this errata. Please refer to nxp official errata document > > > from > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n > > xp.com%2F&data=04%7C01%7Cyibin.gong%40nxp.com%7C48156bc93d > > c84ac26e9d08d942bdc0ac%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0% > > 7C1%7C637614205017900475%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4 > > wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&a > > mp;sdata=keYQubzt1jWrKhaxXr40RL41vzFuIn7x1Sasa3p%2F9Xo%3D&res > > erved=0 . > > > > > > For removing workaround on those chips. Add new i.mx6ul type. > > > > > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> > > > Acked-by: Mark Brown <broonie@kernel.org> > > > --- > > > drivers/spi/spi-imx.c | 47 > > > +++++++++++++++++++++++++++++++++++++++++++---- > > > 1 file changed, 43 insertions(+), 4 deletions(-) > > > > > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index > > > cf235b9..d18ee25 100644 > > > --- a/drivers/spi/spi-imx.c > > > +++ b/drivers/spi/spi-imx.c > > > @@ -59,6 +59,7 @@ enum spi_imx_devtype { > > > IMX35_CSPI, /* CSPI on all i.mx except above */ > > > IMX51_ECSPI, /* ECSPI on i.mx51 */ > > > IMX53_ECSPI, /* ECSPI on i.mx53 and later */ > > > + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ > > > > This patch could be a lot smaller if you didn't introduce a new devtype. You > > could just use the IMX51_ECSPI in imx6ul_ecspi_devtype_data, as all you care > > about as a relevant difference is the tx_glitch_fixed property, which isn't tied > > to the devtype. > I knew tx_glitch_fixed was enough but I still prefer to add new 'IMX6UL_ECSPI' because > we can clearly choose the right IP which has fix the issue while legacy IMX51 if it's not > fixed by dts. > Sorry, I don't follow this reasoning. You are not using the new IMX6UL_ECSPI devtype in any way in this patch, other than a single location, where you just handle it the same as the IMX51_ECSPI devtype. Regards, Lucas > > > > > }; > > > > > > struct spi_imx_data; > > > @@ -78,6 +79,11 @@ struct spi_imx_devtype_data { > > > bool has_slavemode; > > > unsigned int fifo_size; > > > bool dynamic_burst; > > > + /* > > > + * ERR009165 fixed or not: > > > + * > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n > > xp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=04%7C01%7C > > yibin.gong%40nxp.com%7C48156bc93dc84ac26e9d08d942bdc0ac%7C686ea > > 1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637614205017900475%7CU > > nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6 > > Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=J9iZb93uN1VEriN%2F2GAE > > TWxdv4n%2FD6ZXteMCFkB8KHM%3D&reserved=0 > > > + */ > > > + bool tx_glitch_fixed; > > > enum spi_imx_devtype devtype; > > > }; > > > > > > @@ -134,6 +140,11 @@ static inline int is_imx51_ecspi(struct spi_imx_data > > *d) > > > return d->devtype_data->devtype == IMX51_ECSPI; } > > > > > > +static inline int is_imx6ul_ecspi(struct spi_imx_data *d) { > > > + return d->devtype_data->devtype == IMX6UL_ECSPI; } > > > + > > > static inline int is_imx53_ecspi(struct spi_imx_data *d) { > > > return d->devtype_data->devtype == IMX53_ECSPI; @@ -593,8 +604,14 > > @@ > > > static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > > > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > > > spi_imx->spi_bus_clk = clk; > > > > > > - /* ERR009165: work in XHC mode as PIO */ > > > - ctrl &= ~MX51_ECSPI_CTRL_SMC; > > > + /* > > > + * ERR009165: work in XHC mode instead of SMC as PIO on the chips > > > + * before i.mx6ul. > > > + */ > > > + if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed) > > > + ctrl |= MX51_ECSPI_CTRL_SMC; > > > + else > > > + ctrl &= ~MX51_ECSPI_CTRL_SMC; > > > > > > writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); > > > > > > @@ -620,12 +637,16 @@ static int mx51_ecspi_prepare_transfer(struct > > > spi_imx_data *spi_imx, > > > > > > static void mx51_setup_wml(struct spi_imx_data *spi_imx) { > > > + u32 tx_wml = 0; > > > + > > > + if (spi_imx->devtype_data->tx_glitch_fixed) > > > + tx_wml = spi_imx->wml; > > > /* > > > * Configure the DMA register: setup the watermark > > > * and enable DMA request. > > > */ > > > writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | > > > - MX51_ECSPI_DMA_TX_WML(0) | > > > + MX51_ECSPI_DMA_TX_WML(tx_wml) | > > > MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | > > > MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | > > > MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); > > @@ -1019,6 > > > +1040,23 @@ static struct spi_imx_devtype_data > > imx53_ecspi_devtype_data = { > > > .devtype = IMX53_ECSPI, > > > }; > > > > > > +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { > > > + .intctrl = mx51_ecspi_intctrl, > > > + .prepare_message = mx51_ecspi_prepare_message, > > > + .prepare_transfer = mx51_ecspi_prepare_transfer, > > > + .trigger = mx51_ecspi_trigger, > > > + .rx_available = mx51_ecspi_rx_available, > > > + .reset = mx51_ecspi_reset, > > > + .setup_wml = mx51_setup_wml, > > > + .fifo_size = 64, > > > + .has_dmamode = true, > > > + .dynamic_burst = true, > > > + .has_slavemode = true, > > > + .tx_glitch_fixed = true, > > > + .disable = mx51_ecspi_disable, > > > + .devtype = IMX6UL_ECSPI, > > > +}; > > > + > > > static const struct of_device_id spi_imx_dt_ids[] = { > > > { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, > > > { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, > > > }, @@ -1027,6 +1065,7 @@ static const struct of_device_id spi_imx_dt_ids[] > > = { > > > { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, > > > { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, > > > { .compatible = "fsl,imx53-ecspi", .data = > > > &imx53_ecspi_devtype_data, }, > > > + { .compatible = "fsl,imx6ul-ecspi", .data = > > > +&imx6ul_ecspi_devtype_data, }, > > > { /* sentinel */ } > > > }; > > > MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); @@ -1604,7 +1643,7 @@ > > static > > > int spi_imx_probe(struct platform_device *pdev) > > > spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | > > SPI_CS_HIGH \ > > > | SPI_NO_CS; > > > if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || > > > - is_imx53_ecspi(spi_imx)) > > > + is_imx53_ecspi(spi_imx) || is_imx6ul_ecspi(spi_imx)) > > > spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; > > > > > > spi_imx->spi_drctl = spi_drctl; > > >
On 12/07/21 17:31 Lucas Stach <l.stach@pengutronix.de> wrote: > Am Montag, dem 12.07.2021 um 03:48 +0000 schrieb Robin Gong: > > On 09/07/21 17:42 Lucas Stach <l.stach@pengutronix.de> wrote: > > > Am Mittwoch, dem 07.04.2021 um 23:30 +0800 schrieb Robin Gong: > > > > ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and > > > > i.mx8m/8mm still need this errata. Please refer to nxp official > > > > errata document from > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > > w.n > xp.com%2F&data=04%7C01%7Cyibin.gong%40nxp.com%7C48156bc93d > > > > c84ac26e9d08d942bdc0ac%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0% > > > > 7C1%7C637614205017900475%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4 > > > > wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&a > > > > mp;sdata=keYQubzt1jWrKhaxXr40RL41vzFuIn7x1Sasa3p%2F9Xo%3D&res > > > erved=0 . > > > > > > > > For removing workaround on those chips. Add new i.mx6ul type. > > > > > > > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> > > > > Acked-by: Mark Brown <broonie@kernel.org> > > > > --- > > > > drivers/spi/spi-imx.c | 47 > > > > +++++++++++++++++++++++++++++++++++++++++++---- > > > > 1 file changed, 43 insertions(+), 4 deletions(-) > > > > > > > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index > > > > cf235b9..d18ee25 100644 > > > > --- a/drivers/spi/spi-imx.c > > > > +++ b/drivers/spi/spi-imx.c > > > > @@ -59,6 +59,7 @@ enum spi_imx_devtype { > > > > IMX35_CSPI, /* CSPI on all i.mx except above */ > > > > IMX51_ECSPI, /* ECSPI on i.mx51 */ > > > > IMX53_ECSPI, /* ECSPI on i.mx53 and later */ > > > > + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ > > > > > > This patch could be a lot smaller if you didn't introduce a new > > > devtype. You could just use the IMX51_ECSPI in > > > imx6ul_ecspi_devtype_data, as all you care about as a relevant > > > difference is the tx_glitch_fixed property, which isn't tied to the devtype. > > I knew tx_glitch_fixed was enough but I still prefer to add new > > 'IMX6UL_ECSPI' because we can clearly choose the right IP which has > > fix the issue while legacy IMX51 if it's not fixed by dts. > > > Sorry, I don't follow this reasoning. You are not using the new IMX6UL_ECSPI > devtype in any way in this patch, other than a single location, where you just > handle it the same as the IMX51_ECSPI devtype. Okay, will reuse IMX51_ECSPI as devtype, but will still keep "fsl,imx6ul-ecspi". > > > > > > > > > }; > > > > > > > > struct spi_imx_data; > > > > @@ -78,6 +79,11 @@ struct spi_imx_devtype_data { > > > > bool has_slavemode; > > > > unsigned int fifo_size; > > > > bool dynamic_burst; > > > > + /* > > > > + * ERR009165 fixed or not: > > > > + * > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > > w.n > xp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=04%7C01%7C > > > > yibin.gong%40nxp.com%7C48156bc93dc84ac26e9d08d942bdc0ac%7C686ea > > > > 1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637614205017900475%7CU > > > > nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6 > > > > Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=J9iZb93uN1VEriN%2F2GAE > > > TWxdv4n%2FD6ZXteMCFkB8KHM%3D&reserved=0 > > > > + */ > > > > + bool tx_glitch_fixed; > > > > enum spi_imx_devtype devtype; > > > > }; > > > > > > > > @@ -134,6 +140,11 @@ static inline int is_imx51_ecspi(struct > > > > spi_imx_data > > > *d) > > > > return d->devtype_data->devtype == IMX51_ECSPI; } > > > > > > > > +static inline int is_imx6ul_ecspi(struct spi_imx_data *d) { > > > > + return d->devtype_data->devtype == IMX6UL_ECSPI; } > > > > + > > > > static inline int is_imx53_ecspi(struct spi_imx_data *d) { > > > > return d->devtype_data->devtype == IMX53_ECSPI; @@ -593,8 > > > > +604,14 > > > @@ > > > > static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > > > > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > > > > spi_imx->spi_bus_clk = clk; > > > > > > > > - /* ERR009165: work in XHC mode as PIO */ > > > > - ctrl &= ~MX51_ECSPI_CTRL_SMC; > > > > + /* > > > > + * ERR009165: work in XHC mode instead of SMC as PIO on the > chips > > > > + * before i.mx6ul. > > > > + */ > > > > + if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed) > > > > + ctrl |= MX51_ECSPI_CTRL_SMC; > > > > + else > > > > + ctrl &= ~MX51_ECSPI_CTRL_SMC; > > > > > > > > writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); > > > > > > > > @@ -620,12 +637,16 @@ static int > > > > mx51_ecspi_prepare_transfer(struct > > > > spi_imx_data *spi_imx, > > > > > > > > static void mx51_setup_wml(struct spi_imx_data *spi_imx) { > > > > + u32 tx_wml = 0; > > > > + > > > > + if (spi_imx->devtype_data->tx_glitch_fixed) > > > > + tx_wml = spi_imx->wml; > > > > /* > > > > * Configure the DMA register: setup the watermark > > > > * and enable DMA request. > > > > */ > > > > writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | > > > > - MX51_ECSPI_DMA_TX_WML(0) | > > > > + MX51_ECSPI_DMA_TX_WML(tx_wml) | > > > > MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | > > > > MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | > > > > MX51_ECSPI_DMA_RXTDEN, spi_imx->base + > MX51_ECSPI_DMA); > > > @@ -1019,6 > > > > +1040,23 @@ static struct spi_imx_devtype_data > > > imx53_ecspi_devtype_data = { > > > > .devtype = IMX53_ECSPI, > > > > }; > > > > > > > > +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { > > > > + .intctrl = mx51_ecspi_intctrl, > > > > + .prepare_message = mx51_ecspi_prepare_message, > > > > + .prepare_transfer = mx51_ecspi_prepare_transfer, > > > > + .trigger = mx51_ecspi_trigger, > > > > + .rx_available = mx51_ecspi_rx_available, > > > > + .reset = mx51_ecspi_reset, > > > > + .setup_wml = mx51_setup_wml, > > > > + .fifo_size = 64, > > > > + .has_dmamode = true, > > > > + .dynamic_burst = true, > > > > + .has_slavemode = true, > > > > + .tx_glitch_fixed = true, > > > > + .disable = mx51_ecspi_disable, > > > > + .devtype = IMX6UL_ECSPI, > > > > +}; > > > > + > > > > static const struct of_device_id spi_imx_dt_ids[] = { > > > > { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, > > > > { .compatible = "fsl,imx21-cspi", .data = > > > > &imx21_cspi_devtype_data, }, @@ -1027,6 +1065,7 @@ static const > > > > struct of_device_id spi_imx_dt_ids[] > > > = { > > > > { .compatible = "fsl,imx35-cspi", .data = > &imx35_cspi_devtype_data, }, > > > > { .compatible = "fsl,imx51-ecspi", .data = > &imx51_ecspi_devtype_data, }, > > > > { .compatible = "fsl,imx53-ecspi", .data = > > > > &imx53_ecspi_devtype_data, }, > > > > + { .compatible = "fsl,imx6ul-ecspi", .data = > > > > +&imx6ul_ecspi_devtype_data, }, > > > > { /* sentinel */ } > > > > }; > > > > MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); @@ -1604,7 +1643,7 > @@ > > > static > > > > int spi_imx_probe(struct platform_device *pdev) > > > > spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | > > > SPI_CS_HIGH \ > > > > | SPI_NO_CS; > > > > if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || > > > > - is_imx53_ecspi(spi_imx)) > > > > + is_imx53_ecspi(spi_imx) || is_imx6ul_ecspi(spi_imx)) > > > > spi_imx->bitbang.master->mode_bits |= SPI_LOOP | > SPI_READY; > > > > > > > > spi_imx->spi_drctl = spi_drctl; > > > > > >
Am Dienstag, dem 13.07.2021 um 09:12 +0000 schrieb Robin Gong: > On 12/07/21 17:31 Lucas Stach <l.stach@pengutronix.de> wrote: > > Am Montag, dem 12.07.2021 um 03:48 +0000 schrieb Robin Gong: > > > On 09/07/21 17:42 Lucas Stach <l.stach@pengutronix.de> wrote: > > > > Am Mittwoch, dem 07.04.2021 um 23:30 +0800 schrieb Robin Gong: > > > > > ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and > > > > > i.mx8m/8mm still need this errata. Please refer to nxp official > > > > > errata document from > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > > > w.n > > xp.com%2F&data=04%7C01%7Cyibin.gong%40nxp.com%7C48156bc93d > > > > > > c84ac26e9d08d942bdc0ac%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0% > > > > > > 7C1%7C637614205017900475%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4 > > > > > > wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&a > > > > > > mp;sdata=keYQubzt1jWrKhaxXr40RL41vzFuIn7x1Sasa3p%2F9Xo%3D&res > > > > erved=0 . > > > > > > > > > > For removing workaround on those chips. Add new i.mx6ul type. > > > > > > > > > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> > > > > > Acked-by: Mark Brown <broonie@kernel.org> > > > > > --- > > > > > drivers/spi/spi-imx.c | 47 > > > > > +++++++++++++++++++++++++++++++++++++++++++---- > > > > > 1 file changed, 43 insertions(+), 4 deletions(-) > > > > > > > > > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index > > > > > cf235b9..d18ee25 100644 > > > > > --- a/drivers/spi/spi-imx.c > > > > > +++ b/drivers/spi/spi-imx.c > > > > > @@ -59,6 +59,7 @@ enum spi_imx_devtype { > > > > > IMX35_CSPI, /* CSPI on all i.mx except above */ > > > > > IMX51_ECSPI, /* ECSPI on i.mx51 */ > > > > > IMX53_ECSPI, /* ECSPI on i.mx53 and later */ > > > > > + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ > > > > > > > > This patch could be a lot smaller if you didn't introduce a new > > > > devtype. You could just use the IMX51_ECSPI in > > > > imx6ul_ecspi_devtype_data, as all you care about as a relevant > > > > difference is the tx_glitch_fixed property, which isn't tied to the devtype. > > > I knew tx_glitch_fixed was enough but I still prefer to add new > > > 'IMX6UL_ECSPI' because we can clearly choose the right IP which has > > > fix the issue while legacy IMX51 if it's not fixed by dts. > > > > > Sorry, I don't follow this reasoning. You are not using the new IMX6UL_ECSPI > > devtype in any way in this patch, other than a single location, where you just > > handle it the same as the IMX51_ECSPI devtype. > Okay, will reuse IMX51_ECSPI as devtype, but will still keep "fsl,imx6ul-ecspi". > That's exactly what I meant: have a "fsl,imx6ul-ecspi" compatible with it's own imx6ul_ecspi_devtype_data, but reuse the IMX51_ECSPI devtype. Glad we are on the same page now. Regards, Lucas
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index cf235b9..d18ee25 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -59,6 +59,7 @@ enum spi_imx_devtype { IMX35_CSPI, /* CSPI on all i.mx except above */ IMX51_ECSPI, /* ECSPI on i.mx51 */ IMX53_ECSPI, /* ECSPI on i.mx53 and later */ + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ }; struct spi_imx_data; @@ -78,6 +79,11 @@ struct spi_imx_devtype_data { bool has_slavemode; unsigned int fifo_size; bool dynamic_burst; + /* + * ERR009165 fixed or not: + * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf + */ + bool tx_glitch_fixed; enum spi_imx_devtype devtype; }; @@ -134,6 +140,11 @@ static inline int is_imx51_ecspi(struct spi_imx_data *d) return d->devtype_data->devtype == IMX51_ECSPI; } +static inline int is_imx6ul_ecspi(struct spi_imx_data *d) +{ + return d->devtype_data->devtype == IMX6UL_ECSPI; +} + static inline int is_imx53_ecspi(struct spi_imx_data *d) { return d->devtype_data->devtype == IMX53_ECSPI; @@ -593,8 +604,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); spi_imx->spi_bus_clk = clk; - /* ERR009165: work in XHC mode as PIO */ - ctrl &= ~MX51_ECSPI_CTRL_SMC; + /* + * ERR009165: work in XHC mode instead of SMC as PIO on the chips + * before i.mx6ul. + */ + if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed) + ctrl |= MX51_ECSPI_CTRL_SMC; + else + ctrl &= ~MX51_ECSPI_CTRL_SMC; writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); @@ -620,12 +637,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, static void mx51_setup_wml(struct spi_imx_data *spi_imx) { + u32 tx_wml = 0; + + if (spi_imx->devtype_data->tx_glitch_fixed) + tx_wml = spi_imx->wml; /* * Configure the DMA register: setup the watermark * and enable DMA request. */ writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | - MX51_ECSPI_DMA_TX_WML(0) | + MX51_ECSPI_DMA_TX_WML(tx_wml) | MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); @@ -1019,6 +1040,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = { .devtype = IMX53_ECSPI, }; +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { + .intctrl = mx51_ecspi_intctrl, + .prepare_message = mx51_ecspi_prepare_message, + .prepare_transfer = mx51_ecspi_prepare_transfer, + .trigger = mx51_ecspi_trigger, + .rx_available = mx51_ecspi_rx_available, + .reset = mx51_ecspi_reset, + .setup_wml = mx51_setup_wml, + .fifo_size = 64, + .has_dmamode = true, + .dynamic_burst = true, + .has_slavemode = true, + .tx_glitch_fixed = true, + .disable = mx51_ecspi_disable, + .devtype = IMX6UL_ECSPI, +}; + static const struct of_device_id spi_imx_dt_ids[] = { { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, }, @@ -1027,6 +1065,7 @@ static const struct of_device_id spi_imx_dt_ids[] = { { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, }, + { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); @@ -1604,7 +1643,7 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ | SPI_NO_CS; if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || - is_imx53_ecspi(spi_imx)) + is_imx53_ecspi(spi_imx) || is_imx6ul_ecspi(spi_imx)) spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; spi_imx->spi_drctl = spi_drctl;