| Message ID | 20210525113316.25416-1-po-hsu.lin@canonical.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | BPF |
| Headers | show |
| Series | [PATCHv2] selftests: Use kselftest skip code for skipped tests | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
Po-Hsu Lin <po-hsu.lin@canonical.com> writes: > There are several test cases still using exit 0 when they need to be > skipped. Use kselftest framework skip code instead so it can help us > to distinguish the proper return status. > > Criterion to filter out what should be fixed in selftests directory: > grep -r "exit 0" -B1 | grep -i skip > > This change might cause some false-positives if people are running > these test scripts directly and only checking their return codes, > which will change from 0 to 4. However I think the impact should be > small as most of our scripts here are already using this skip code. > And there will be no such issue if running them with the kselftest > framework. > > V2: router_mpath_nh.sh and outer_mpath_nh_res.sh sources lib.sh, > there is no need to assign ksft_skip value in these two. > > Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> I want to note that defining ksft_skip=4 in every test separately is the current practice. I agree with Willem (in a parallel thread) that this stuff should live in a library of its own, but there is none currently. When there is, it looks like the conversion would be mechanical. Which is to say, IMHO this patch makes sense on its own as an incremental improvement. Reviewed-by: Petr Machata <petrm@nvidia.com>
On Wed, May 26, 2021 at 4:54 PM Petr Machata <petrm@nvidia.com> wrote: > > > Po-Hsu Lin <po-hsu.lin@canonical.com> writes: > > > There are several test cases still using exit 0 when they need to be > > skipped. Use kselftest framework skip code instead so it can help us > > to distinguish the proper return status. > > > > Criterion to filter out what should be fixed in selftests directory: > > grep -r "exit 0" -B1 | grep -i skip > > > > This change might cause some false-positives if people are running > > these test scripts directly and only checking their return codes, > > which will change from 0 to 4. However I think the impact should be > > small as most of our scripts here are already using this skip code. > > And there will be no such issue if running them with the kselftest > > framework. > > > > V2: router_mpath_nh.sh and outer_mpath_nh_res.sh sources lib.sh, > > there is no need to assign ksft_skip value in these two. > > > > Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> > > I want to note that defining ksft_skip=4 in every test separately is the > current practice. I agree with Willem (in a parallel thread) that this > stuff should live in a library of its own, but there is none currently. > When there is, it looks like the conversion would be mechanical. > > Which is to say, IMHO this patch makes sense on its own as an > incremental improvement. > > Reviewed-by: Petr Machata <petrm@nvidia.com> Hello folks, any other comment on this patch? Or if I should break this down to smaller patches for different suites in kselftests? Thanks! PHLin
On 7/7/21 10:18 PM, Po-Hsu Lin wrote: > On Wed, May 26, 2021 at 4:54 PM Petr Machata <petrm@nvidia.com> wrote: >> >> >> Po-Hsu Lin <po-hsu.lin@canonical.com> writes: >> >>> There are several test cases still using exit 0 when they need to be >>> skipped. Use kselftest framework skip code instead so it can help us >>> to distinguish the proper return status. >>> >>> Criterion to filter out what should be fixed in selftests directory: >>> grep -r "exit 0" -B1 | grep -i skip >>> >>> This change might cause some false-positives if people are running >>> these test scripts directly and only checking their return codes, >>> which will change from 0 to 4. However I think the impact should be >>> small as most of our scripts here are already using this skip code. >>> And there will be no such issue if running them with the kselftest >>> framework. >>> >>> V2: router_mpath_nh.sh and outer_mpath_nh_res.sh sources lib.sh, >>> there is no need to assign ksft_skip value in these two. >>> >>> Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> >> >> I want to note that defining ksft_skip=4 in every test separately is the >> current practice. I agree with Willem (in a parallel thread) that this >> stuff should live in a library of its own, but there is none currently. >> When there is, it looks like the conversion would be mechanical. >> >> Which is to say, IMHO this patch makes sense on its own as an >> incremental improvement. >> >> Reviewed-by: Petr Machata <petrm@nvidia.com> > > Hello folks, > any other comment on this patch? Or if I should break this down to > smaller patches for different suites in kselftests? > Thanks! > PHLin > Yes plase, break them into individual patches. Breaking this into individual patches makes it easier to pull them in and allows us handle dependencies better. thanks, -- Shuah
diff --git a/tools/testing/selftests/bpf/test_bpftool_build.sh b/tools/testing/selftests/bpf/test_bpftool_build.sh index ac349a5..b6fab1e 100755 --- a/tools/testing/selftests/bpf/test_bpftool_build.sh +++ b/tools/testing/selftests/bpf/test_bpftool_build.sh @@ -1,6 +1,9 @@ #!/bin/bash # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + case $1 in -h|--help) echo -e "$0 [-j <n>]" @@ -22,7 +25,7 @@ KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../) cd $KDIR_ROOT_DIR if [ ! -e tools/bpf/bpftool/Makefile ]; then echo -e "skip: bpftool files not found!\n" - exit 0 + exit $ksft_skip fi ERROR=0 diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh index 637fcf4..fd3f218 100755 --- a/tools/testing/selftests/bpf/test_xdp_meta.sh +++ b/tools/testing/selftests/bpf/test_xdp_meta.sh @@ -1,5 +1,8 @@ #!/bin/sh +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + cleanup() { if [ "$?" = "0" ]; then @@ -17,7 +20,7 @@ cleanup() ip link set dev lo xdp off 2>/dev/null > /dev/null if [ $? -ne 0 ];then echo "selftests: [SKIP] Could not run test without the ip xdp support" - exit 0 + exit $ksft_skip fi set -e diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh index bb8b0da..1aa7404 100755 --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -2,6 +2,9 @@ # SPDX-License-Identifier: GPL-2.0 # Author: Jesper Dangaard Brouer <hawk@kernel.org> +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + # Allow wrapper scripts to name test if [ -z "$TESTNAME" ]; then TESTNAME=xdp_vlan @@ -94,7 +97,7 @@ while true; do -h | --help ) usage; echo "selftests: $TESTNAME [SKIP] usage help info requested" - exit 0 + exit $ksft_skip ;; * ) shift @@ -117,7 +120,7 @@ fi ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null if [ $? -ne 0 ]; then echo "selftests: $TESTNAME [SKIP] need ip xdp support" - exit 0 + exit $ksft_skip fi # Interactive mode likely require us to cleanup netns diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index a8ad928..9074e25 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -37,6 +37,9 @@ # # server / client nomenclature relative to ns-A +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + VERBOSE=0 NSA_DEV=eth1 @@ -3946,7 +3949,7 @@ fi which nettest >/dev/null if [ $? -ne 0 ]; then echo "'nettest' command not found; skipping tests" - exit 0 + exit $ksft_skip fi declare -i nfail=0 diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index a93e6b6..43ea840 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -3,6 +3,9 @@ # This test is for checking IPv4 and IPv6 FIB rules API +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + ret=0 PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} @@ -238,12 +241,12 @@ run_fibrule_tests() if [ "$(id -u)" -ne 0 ];then echo "SKIP: Need root privileges" - exit 0 + exit $ksft_skip fi if [ ! -x "$(command -v ip)" ]; then echo "SKIP: Could not run test without ip tool" - exit 0 + exit $ksft_skip fi # start clean diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 42e28c9..eed9f08 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -4,6 +4,9 @@ ############################################################################## # Defines +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + # Can be overridden by the configuration file. PING=${PING:=ping} PING6=${PING6:=ping6} @@ -121,7 +124,7 @@ check_ethtool_lanes_support() if [[ "$(id -u)" -ne 0 ]]; then echo "SKIP: need root privileges" - exit 0 + exit $ksft_skip fi if [[ "$CHECK_TC" = "yes" ]]; then diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh index 76efb1f..a0d612e 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh @@ -411,7 +411,7 @@ ping_ipv6() ip nexthop ls >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "Nexthop objects not supported; skipping tests" - exit 0 + exit $ksft_skip fi trap cleanup EXIT diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh index 4898dd4..cb08ffe 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh @@ -386,7 +386,7 @@ ping_ipv6() ip nexthop ls >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "Nexthop objects not supported; skipping tests" - exit 0 + exit $ksft_skip fi trap cleanup EXIT diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests index 8b42e8b..a59cb6a 100755 --- a/tools/testing/selftests/net/run_afpackettests +++ b/tools/testing/selftests/net/run_afpackettests @@ -1,9 +1,12 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + if [ $(id -u) != 0 ]; then echo $msg must be run as root >&2 - exit 0 + exit $ksft_skip fi ret=0 diff --git a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh index ad7a9fc..1003119 100755 --- a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh @@ -163,6 +163,9 @@ # +---------------------------------------------------+ # +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + readonly LOCALSID_TABLE_ID=90 readonly IPv6_RT_NETWORK=fd00 readonly IPv4_HS_NETWORK=10.0.0 @@ -464,18 +467,18 @@ host_vpn_isolation_tests() if [ "$(id -u)" -ne 0 ];then echo "SKIP: Need root privileges" - exit 0 + exit $ksft_skip fi if [ ! -x "$(command -v ip)" ]; then echo "SKIP: Could not run test without ip tool" - exit 0 + exit $ksft_skip fi modprobe vrf &>/dev/null if [ ! -e /proc/sys/net/vrf/strict_mode ]; then echo "SKIP: vrf sysctl does not exist" - exit 0 + exit $ksft_skip fi cleanup &>/dev/null diff --git a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh index 68708f5..b9b06ef 100755 --- a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh @@ -164,6 +164,9 @@ # +---------------------------------------------------+ # +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + readonly LOCALSID_TABLE_ID=90 readonly IPv6_RT_NETWORK=fd00 readonly IPv6_HS_NETWORK=cafe @@ -472,18 +475,18 @@ host_vpn_isolation_tests() if [ "$(id -u)" -ne 0 ];then echo "SKIP: Need root privileges" - exit 0 + exit $ksft_skip fi if [ ! -x "$(command -v ip)" ]; then echo "SKIP: Could not run test without ip tool" - exit 0 + exit $ksft_skip fi modprobe vrf &>/dev/null if [ ! -e /proc/sys/net/vrf/strict_mode ]; then echo "SKIP: vrf sysctl does not exist" - exit 0 + exit $ksft_skip fi cleanup &>/dev/null diff --git a/tools/testing/selftests/net/unicast_extensions.sh b/tools/testing/selftests/net/unicast_extensions.sh index dbf0421..728e4d5 100755 --- a/tools/testing/selftests/net/unicast_extensions.sh +++ b/tools/testing/selftests/net/unicast_extensions.sh @@ -28,12 +28,15 @@ # These tests provide an easy way to flip the expected result of any # of these behaviors for testing kernel patches that change them. +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + # nettest can be run from PATH or from same directory as this selftest if ! which nettest >/dev/null; then PATH=$PWD:$PATH if ! which nettest >/dev/null; then echo "'nettest' command not found; skipping tests" - exit 0 + exit $ksft_skip fi fi diff --git a/tools/testing/selftests/net/vrf_strict_mode_test.sh b/tools/testing/selftests/net/vrf_strict_mode_test.sh index 18b982d..865d53c 100755 --- a/tools/testing/selftests/net/vrf_strict_mode_test.sh +++ b/tools/testing/selftests/net/vrf_strict_mode_test.sh @@ -3,6 +3,9 @@ # This test is designed for testing the new VRF strict_mode functionality. +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + ret=0 # identifies the "init" network namespace which is often called root network @@ -371,18 +374,18 @@ vrf_strict_mode_check_support() if [ "$(id -u)" -ne 0 ];then echo "SKIP: Need root privileges" - exit 0 + exit $ksft_skip fi if [ ! -x "$(command -v ip)" ]; then echo "SKIP: Could not run test without ip tool" - exit 0 + exit $ksft_skip fi modprobe vrf &>/dev/null if [ ! -e /proc/sys/net/vrf/strict_mode ]; then echo "SKIP: vrf sysctl does not exist" - exit 0 + exit $ksft_skip fi cleanup &> /dev/null diff --git a/tools/testing/selftests/ptp/phc.sh b/tools/testing/selftests/ptp/phc.sh index ac6e5a6..ca3c844c 100755 --- a/tools/testing/selftests/ptp/phc.sh +++ b/tools/testing/selftests/ptp/phc.sh @@ -1,6 +1,9 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + ALL_TESTS=" settime adjtime @@ -13,12 +16,12 @@ DEV=$1 if [[ "$(id -u)" -ne 0 ]]; then echo "SKIP: need root privileges" - exit 0 + exit $ksft_skip fi if [[ "$DEV" == "" ]]; then echo "SKIP: PTP device not provided" - exit 0 + exit $ksft_skip fi require_command() diff --git a/tools/testing/selftests/vm/charge_reserved_hugetlb.sh b/tools/testing/selftests/vm/charge_reserved_hugetlb.sh index 18d3368..fe8fcfb 100644 --- a/tools/testing/selftests/vm/charge_reserved_hugetlb.sh +++ b/tools/testing/selftests/vm/charge_reserved_hugetlb.sh @@ -1,11 +1,14 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + set -e if [[ $(id -u) -ne 0 ]]; then echo "This test must be run as root. Skipping..." - exit 0 + exit $ksft_skip fi fault_limit_file=limit_in_bytes diff --git a/tools/testing/selftests/vm/hugetlb_reparenting_test.sh b/tools/testing/selftests/vm/hugetlb_reparenting_test.sh index d11d1fe..4a9a3af 100644 --- a/tools/testing/selftests/vm/hugetlb_reparenting_test.sh +++ b/tools/testing/selftests/vm/hugetlb_reparenting_test.sh @@ -1,11 +1,14 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + set -e if [[ $(id -u) -ne 0 ]]; then echo "This test must be run as root. Skipping..." - exit 0 + exit $ksft_skip fi usage_file=usage_in_bytes
There are several test cases still using exit 0 when they need to be skipped. Use kselftest framework skip code instead so it can help us to distinguish the proper return status. Criterion to filter out what should be fixed in selftests directory: grep -r "exit 0" -B1 | grep -i skip This change might cause some false-positives if people are running these test scripts directly and only checking their return codes, which will change from 0 to 4. However I think the impact should be small as most of our scripts here are already using this skip code. And there will be no such issue if running them with the kselftest framework. V2: router_mpath_nh.sh and outer_mpath_nh_res.sh sources lib.sh, there is no need to assign ksft_skip value in these two. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> --- tools/testing/selftests/bpf/test_bpftool_build.sh | 5 ++++- tools/testing/selftests/bpf/test_xdp_meta.sh | 5 ++++- tools/testing/selftests/bpf/test_xdp_vlan.sh | 7 +++++-- tools/testing/selftests/net/fcnal-test.sh | 5 ++++- tools/testing/selftests/net/fib_rule_tests.sh | 7 +++++-- tools/testing/selftests/net/forwarding/lib.sh | 5 ++++- tools/testing/selftests/net/forwarding/router_mpath_nh.sh | 2 +- tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh | 2 +- tools/testing/selftests/net/run_afpackettests | 5 ++++- tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh | 9 ++++++--- tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh | 9 ++++++--- tools/testing/selftests/net/unicast_extensions.sh | 5 ++++- tools/testing/selftests/net/vrf_strict_mode_test.sh | 9 ++++++--- tools/testing/selftests/ptp/phc.sh | 7 +++++-- tools/testing/selftests/vm/charge_reserved_hugetlb.sh | 5 ++++- tools/testing/selftests/vm/hugetlb_reparenting_test.sh | 5 ++++- 16 files changed, 67 insertions(+), 25 deletions(-)