@@ -134,6 +134,15 @@ config DRM_PANEL_ILITEK_ILI9881C
Say Y if you want to enable support for panels based on the
Ilitek ILI9881c controller.
+config DRM_PANEL_INNOLUX_EJ030NA
+ tristate "Innolux EJ030NA 320x480 LCD panel"
+ depends on OF && SPI
+ select REGMAP_SPI
+ help
+ Say Y here to enable support for the Innolux/Chimei EJ030NA
+ 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
+ and LDK handheld gaming consoles.
+
config DRM_PANEL_INNOLUX_P079ZCA
tristate "Innolux P079ZCA panel"
depends on OF
@@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
+obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
new file mode 100644
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Innolux/Chimei EJ030NA TFT LCD panel driver
+ *
+ * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
+ * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct ej030na_info {
+ const struct drm_display_mode *display_modes;
+ unsigned int num_modes;
+ u16 width_mm, height_mm;
+ u32 bus_format, bus_flags;
+};
+
+struct ej030na {
+ struct drm_panel panel;
+ struct spi_device *spi;
+ struct regmap *map;
+
+ const struct ej030na_info *panel_info;
+
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+};
+
+static inline struct ej030na *to_ej030na(struct drm_panel *panel)
+{
+ return container_of(panel, struct ej030na, panel);
+}
+
+static const struct reg_sequence ej030na_init_sequence[] = {
+ { 0x05, 0x1e },
+ { 0x05, 0x5c },
+ { 0x02, 0x14 },
+ { 0x03, 0x40 },
+ { 0x04, 0x07 },
+ { 0x06, 0x12 },
+ { 0x07, 0xd2 },
+ { 0x0c, 0x06 },
+ { 0x0d, 0x40 },
+ { 0x0e, 0x40 },
+ { 0x0f, 0x40 },
+ { 0x10, 0x40 },
+ { 0x11, 0x40 },
+ { 0x2f, 0x40 },
+ { 0x5a, 0x02 },
+
+ { 0x30, 0x07 },
+ { 0x31, 0x57 },
+ { 0x32, 0x53 },
+ { 0x33, 0x77 },
+ { 0x34, 0xb8 },
+ { 0x35, 0xbd },
+ { 0x36, 0xb8 },
+ { 0x37, 0xe7 },
+ { 0x38, 0x04 },
+ { 0x39, 0xff },
+
+ { 0x40, 0x0b },
+ { 0x41, 0xb8 },
+ { 0x42, 0xab },
+ { 0x43, 0xb9 },
+ { 0x44, 0x6a },
+ { 0x45, 0x56 },
+ { 0x46, 0x61 },
+ { 0x47, 0x08 },
+ { 0x48, 0x0f },
+ { 0x49, 0x0f },
+
+ { 0x2b, 0x01 },
+};
+
+static int ej030na_prepare(struct drm_panel *panel)
+{
+ struct ej030na *priv = to_ej030na(panel);
+ struct device *dev = &priv->spi->dev;
+ int err;
+
+ err = regulator_enable(priv->supply);
+ if (err) {
+ dev_err(dev, "Failed to enable power supply: %d\n", err);
+ return err;
+ }
+
+ /* Reset the chip */
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ usleep_range(50, 150);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ usleep_range(50, 150);
+
+ err = regmap_multi_reg_write(priv->map, ej030na_init_sequence,
+ ARRAY_SIZE(ej030na_init_sequence));
+ if (err) {
+ dev_err(dev, "Failed to init registers: %d\n", err);
+ goto err_disable_regulator;
+ }
+
+ msleep(120);
+
+ return 0;
+
+err_disable_regulator:
+ regulator_disable(priv->supply);
+ return err;
+}
+
+static int ej030na_unprepare(struct drm_panel *panel)
+{
+ struct ej030na *priv = to_ej030na(panel);
+
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ regulator_disable(priv->supply);
+
+ return 0;
+}
+
+static int ej030na_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct ej030na *priv = to_ej030na(panel);
+ const struct ej030na_info *panel_info = priv->panel_info;
+ struct drm_display_mode *mode;
+ unsigned int i;
+
+ for (i = 0; i < panel_info->num_modes; i++) {
+ mode = drm_mode_duplicate(connector->dev,
+ &panel_info->display_modes[i]);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ if (panel_info->num_modes == 1)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_probed_add(connector, mode);
+ }
+
+ connector->display_info.bpc = 8;
+ connector->display_info.width_mm = panel_info->width_mm;
+ connector->display_info.height_mm = panel_info->height_mm;
+
+ drm_display_info_set_bus_formats(&connector->display_info,
+ &panel_info->bus_format, 1);
+ connector->display_info.bus_flags = panel_info->bus_flags;
+
+ return panel_info->num_modes;
+}
+
+static const struct drm_panel_funcs ej030na_funcs = {
+ .prepare = ej030na_prepare,
+ .unprepare = ej030na_unprepare,
+ .get_modes = ej030na_get_modes,
+};
+
+static const struct regmap_config ej030na_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x5a,
+};
+
+static int ej030na_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct ej030na *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->spi = spi;
+ spi_set_drvdata(spi, priv);
+
+ priv->map = devm_regmap_init_spi(spi, &ej030na_regmap_config);
+ if (IS_ERR(priv->map)) {
+ dev_err(dev, "Unable to init regmap\n");
+ return PTR_ERR(priv->map);
+ }
+
+ priv->panel_info = of_device_get_match_data(dev);
+ if (!priv->panel_info)
+ return -EINVAL;
+
+ priv->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(priv->supply)) {
+ dev_err(dev, "Failed to get power supply\n");
+ return PTR_ERR(priv->supply);
+ }
+
+ priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->reset_gpio)) {
+ dev_err(dev, "Failed to get reset GPIO\n");
+ return PTR_ERR(priv->reset_gpio);
+ }
+
+ drm_panel_init(&priv->panel, dev, &ej030na_funcs,
+ DRM_MODE_CONNECTOR_DPI);
+
+ err = drm_panel_of_backlight(&priv->panel);
+ if (err)
+ return err;
+
+ drm_panel_add(&priv->panel);
+
+ return 0;
+}
+
+static int ej030na_remove(struct spi_device *spi)
+{
+ struct ej030na *priv = spi_get_drvdata(spi);
+
+ drm_panel_remove(&priv->panel);
+ drm_panel_disable(&priv->panel);
+ drm_panel_unprepare(&priv->panel);
+
+ return 0;
+}
+
+static const struct drm_display_mode ej030na_modes[] = {
+ { /* 60 Hz */
+ .clock = 14400,
+ .hdisplay = 320,
+ .hsync_start = 320 + 10,
+ .hsync_end = 320 + 10 + 37,
+ .htotal = 320 + 10 + 37 + 33,
+ .vdisplay = 480,
+ .vsync_start = 480 + 102,
+ .vsync_end = 480 + 102 + 9 + 9,
+ .vtotal = 480 + 102 + 9 + 9,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ },
+ { /* 50 Hz */
+ .clock = 12000,
+ .hdisplay = 320,
+ .hsync_start = 320 + 10,
+ .hsync_end = 320 + 10 + 37,
+ .htotal = 320 + 10 + 37 + 33,
+ .vdisplay = 480,
+ .vsync_start = 480 + 102,
+ .vsync_end = 480 + 102 + 9,
+ .vtotal = 480 + 102 + 9 + 9,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ },
+};
+
+static const struct ej030na_info ej030na_info = {
+ .display_modes = ej030na_modes,
+ .num_modes = ARRAY_SIZE(ej030na_modes),
+ .width_mm = 70,
+ .height_mm = 51,
+ .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW,
+};
+
+static const struct of_device_id ej030na_of_match[] = {
+ { .compatible = "innolux,ej030na", .data = &ej030na_info },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ej030na_of_match);
+
+static struct spi_driver ej030na_driver = {
+ .driver = {
+ .name = "panel-innolux-ej030na",
+ .of_match_table = ej030na_of_match,
+ },
+ .probe = ej030na_probe,
+ .remove = ej030na_remove,
+};
+module_spi_driver(ej030na_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
+MODULE_LICENSE("GPL v2");