| Message ID | 201c608e24da92498fde48708afa2dedde5c8f0b.1624954576.git.ming.qian@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | imx8q video decoder/encoder driver | expand |
On Tue, Jun 29, 2021 at 04:21:02PM +0800, Ming Qian wrote: > Add devicetree binding documentation for IMX8Q Video Processing Unit IP > > Signed-off-by: Ming Qian <ming.qian@nxp.com> > Signed-off-by: Shijie Qin <shijie.qin@nxp.com> > Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> > --- > .../bindings/media/nxp,imx8q-vpu.yaml | 191 ++++++++++++++++++ > 1 file changed, 191 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml > new file mode 100644 > index 000000000000..b9e38caf3d10 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml > @@ -0,0 +1,191 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/nxp,imx8q-vpu.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP i.MX8Q video encode and decode accelerators > + > +maintainers: > + - Ming Qian <ming.qian@nxp.com> > + - Shijie Qin <shijie.qin@nxp.com> > + > +description: |- > + The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present > + on NXP i.MX8Q SoCs. > + > +properties: > + $nodename: > + pattern: "^vpu@[0-9a-f]+$" > + > + compatible: > + oneOf: > + - const: nxp,imx8qm-vpu > + - const: nxp,imx8qxp-vpu > + > + reg: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + memory-region: > + description: > + Phandle to a node describing reserved memory used by VPU. > + (see bindings/reserved-memory/reserved-memory.txt) How many? > + > +patternProperties: > + "^mailbox@[0-9a-f]+$": > + description: > + Each vpu encoder or decoder correspond a MU, which used for communication > + between driver and firmware. Implement via mailbox on driver. > + $ref: ../mailbox/fsl,mu.yaml# > + > + > + "^vpu_core@[0-9a-f]+$": > + description: > + Each core correspond a decoder or encoder, need to configure them > + separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC > + has one decoder and one encoder. > + type: object > + > + properties: > + compatible: > + oneOf: > + - const: nxp,imx8q-vpu-decoder > + - const: nxp,imx8q-vpu-encoder > + > + reg: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + mbox-names: > + items: > + - const: tx0 > + - const: tx1 > + - const: rx > + > + mboxes: > + description: > + List of phandle of 2 MU channels for tx, 1 MU channel for rx. > + maxItems: 1 > + > + nxp,boot-region: > + description: > + Phandle to a node describing reserved memory used by firmware > + loading. > + $ref: /schemas/types.yaml#/definitions/phandle 'memory-region' is what points to reserved regions. If you have more than one, then you need to define what each index is. > + > + nxp,rpc-region: > + description: > + Phandle to a node describing reserved memory used by RPC shared > + memory between firmware and driver. > + $ref: /schemas/types.yaml#/definitions/phandle > + > + nxp,print-offset: > + description: > + The memory offset from RPC address, used by reserve firmware log. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + required: > + - compatible > + - reg > + - power-domains > + - mbox-names > + - mboxes > + - nxp,boot-region > + - nxp,rpc-region > + - nxp,print-offset > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - power-domains > + - memory-region > + > +additionalProperties: true Nope. 'true' is only acceptible for common bindings. > + > +examples: > + # Device node example for i.MX8QM platform: > + - | > + #include <dt-bindings/firmware/imx/rsrc.h> > + > + vpu: vpu@2c000000 { > + compatible = "nxp,imx8qm-vpu"; > + ranges = <0x2c000000 0x2c000000 0x2000000>; > + reg = <0x2c000000 0x1000000>; > + #address-cells = <1>; > + #size-cells = <1>; > + power-domains = <&pd IMX_SC_R_VPU>; > + memory-region = <&vpu_reserved>; > + > + mu_m0: mailbox@2d000000 { > + compatible = "fsl,imx6sx-mu"; > + reg = <0x2d000000 0x20000>; > + interrupts = <0 472 4>; > + #mbox-cells = <2>; > + power-domains = <&pd IMX_SC_R_VPU_MU_0>; > + }; > + > + mu1_m0: mailbox@2d020000 { > + compatible = "fsl,imx6sx-mu"; > + reg = <0x2d020000 0x20000>; > + interrupts = <0 473 4>; > + #mbox-cells = <2>; > + power-domains = <&pd IMX_SC_R_VPU_MU_1>; > + }; > + > + mu2_m0: mailbox@2d040000 { > + compatible = "fsl,imx6sx-mu"; > + reg = <0x2d040000 0x20000>; > + interrupts = <0 474 4>; > + #mbox-cells = <2>; > + power-domains = <&pd IMX_SC_R_VPU_MU_2>; > + }; > + > + vpu_core0: vpu_core@2d080000 { > + compatible = "nxp,imx8q-vpu-decoder"; > + reg = <0x2d080000 0x10000>; > + power-domains = <&pd IMX_SC_R_VPU_DEC_0>; > + mbox-names = "tx0", "tx1", "rx"; > + mboxes = <&mu_m0 0 0 > + &mu_m0 0 1 > + &mu_m0 1 0>; > + nxp,boot-region = <&decoder_boot>; > + nxp,rpc-region = <&decoder_rpc>; > + nxp,print-offset = <0x180000>; > + }; > + > + vpu_core1: vpu_core@2d090000 { > + compatible = "nxp,imx8q-vpu-encoder"; > + reg = <0x2d090000 0x10000>; > + power-domains = <&pd IMX_SC_R_VPU_ENC_0>; > + mbox-names = "tx0", "tx1", "rx"; > + mboxes = <&mu1_m0 0 0 > + &mu1_m0 0 1 > + &mu1_m0 1 0>; > + nxp,boot-region = <&encoder1_boot>; > + nxp,rpc-region = <&encoder1_rpc>; > + nxp,print-offset = <0x80000>; > + }; > + > + vpu_core2: vpu_core@2d0a0000 { > + reg = <0x2d0a0000 0x10000>; > + compatible = "nxp,imx8q-vpu-encoder"; > + power-domains = <&pd IMX_SC_R_VPU_ENC_1>; > + mbox-names = "tx0", "tx1", "rx"; > + mboxes = <&mu2_m0 0 0 > + &mu2_m0 0 1 > + &mu2_m0 1 0>; > + nxp,boot-region = <&encoder2_boot>; > + nxp,rpc-region = <&encoder2_rpc>; > + nxp,print-offset = <0x80000>; > + }; > + }; > + > +... > -- > 2.31.1 > >
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml new file mode 100644 index 000000000000..b9e38caf3d10 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml @@ -0,0 +1,191 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx8q-vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8Q video encode and decode accelerators + +maintainers: + - Ming Qian <ming.qian@nxp.com> + - Shijie Qin <shijie.qin@nxp.com> + +description: |- + The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present + on NXP i.MX8Q SoCs. + +properties: + $nodename: + pattern: "^vpu@[0-9a-f]+$" + + compatible: + oneOf: + - const: nxp,imx8qm-vpu + - const: nxp,imx8qxp-vpu + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + memory-region: + description: + Phandle to a node describing reserved memory used by VPU. + (see bindings/reserved-memory/reserved-memory.txt) + +patternProperties: + "^mailbox@[0-9a-f]+$": + description: + Each vpu encoder or decoder correspond a MU, which used for communication + between driver and firmware. Implement via mailbox on driver. + $ref: ../mailbox/fsl,mu.yaml# + + + "^vpu_core@[0-9a-f]+$": + description: + Each core correspond a decoder or encoder, need to configure them + separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC + has one decoder and one encoder. + type: object + + properties: + compatible: + oneOf: + - const: nxp,imx8q-vpu-decoder + - const: nxp,imx8q-vpu-encoder + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + mbox-names: + items: + - const: tx0 + - const: tx1 + - const: rx + + mboxes: + description: + List of phandle of 2 MU channels for tx, 1 MU channel for rx. + maxItems: 1 + + nxp,boot-region: + description: + Phandle to a node describing reserved memory used by firmware + loading. + $ref: /schemas/types.yaml#/definitions/phandle + + nxp,rpc-region: + description: + Phandle to a node describing reserved memory used by RPC shared + memory between firmware and driver. + $ref: /schemas/types.yaml#/definitions/phandle + + nxp,print-offset: + description: + The memory offset from RPC address, used by reserve firmware log. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - reg + - power-domains + - mbox-names + - mboxes + - nxp,boot-region + - nxp,rpc-region + - nxp,print-offset + + additionalProperties: false + +required: + - compatible + - reg + - power-domains + - memory-region + +additionalProperties: true + +examples: + # Device node example for i.MX8QM platform: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + + vpu: vpu@2c000000 { + compatible = "nxp,imx8qm-vpu"; + ranges = <0x2c000000 0x2c000000 0x2000000>; + reg = <0x2c000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&pd IMX_SC_R_VPU>; + memory-region = <&vpu_reserved>; + + mu_m0: mailbox@2d000000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d000000 0x20000>; + interrupts = <0 472 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_0>; + }; + + mu1_m0: mailbox@2d020000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d020000 0x20000>; + interrupts = <0 473 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_1>; + }; + + mu2_m0: mailbox@2d040000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d040000 0x20000>; + interrupts = <0 474 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_2>; + }; + + vpu_core0: vpu_core@2d080000 { + compatible = "nxp,imx8q-vpu-decoder"; + reg = <0x2d080000 0x10000>; + power-domains = <&pd IMX_SC_R_VPU_DEC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu_m0 0 0 + &mu_m0 0 1 + &mu_m0 1 0>; + nxp,boot-region = <&decoder_boot>; + nxp,rpc-region = <&decoder_rpc>; + nxp,print-offset = <0x180000>; + }; + + vpu_core1: vpu_core@2d090000 { + compatible = "nxp,imx8q-vpu-encoder"; + reg = <0x2d090000 0x10000>; + power-domains = <&pd IMX_SC_R_VPU_ENC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu1_m0 0 0 + &mu1_m0 0 1 + &mu1_m0 1 0>; + nxp,boot-region = <&encoder1_boot>; + nxp,rpc-region = <&encoder1_rpc>; + nxp,print-offset = <0x80000>; + }; + + vpu_core2: vpu_core@2d0a0000 { + reg = <0x2d0a0000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_1>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu2_m0 0 0 + &mu2_m0 0 1 + &mu2_m0 1 0>; + nxp,boot-region = <&encoder2_boot>; + nxp,rpc-region = <&encoder2_rpc>; + nxp,print-offset = <0x80000>; + }; + }; + +...