diff mbox series

[BlueZ,v3,1/4] doc: Add error-codes.txt to describe error codes of D-Bus method returns

Message ID 20210714180917.BlueZ.v3.1.Ide6362da19898d001b053656ee8bf76e183633d8@changeid (mailing list archive)
State New, archived
Headers show
Series Detailed error code | expand

Commit Message

Miao-chen Chou July 15, 2021, 1:09 a.m. UTC 
(no changes since v1)

 doc/error-code.txt | 266 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 266 insertions(+)
 create mode 100644 doc/error-code.txt

Comments

bluez.test.bot@gmail.com July 15, 2021, 1:24 a.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=515793

---Test result---

Test Summary:
CheckPatch                    PASS      0.97 seconds
GitLint                       PASS      0.38 seconds
Prep - Setup ELL              PASS      39.03 seconds
Build - Prep                  PASS      0.11 seconds
Build - Configure             PASS      6.85 seconds
Build - Make                  FAIL      145.57 seconds
Make Check                    FAIL      0.45 seconds
Make Distcheck                FAIL      133.34 seconds
Build w/ext ELL - Configure   PASS      6.88 seconds
Build w/ext ELL - Make        FAIL      134.90 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - FAIL
Desc: Build the BlueZ source tree
Output:
src/error.c: In function ‘btd_error_bredr_conn_from_errno’:
src/error.c:151:7: error: ‘EALREADY’ undeclared (first use in this function)
  151 |  case EALREADY:
      |       ^~~~~~~~
src/error.c:151:7: note: each undeclared identifier is reported only once for each function it appears in
src/error.c:152:7: error: ‘EISCONN’ undeclared (first use in this function)
  152 |  case EISCONN:
      |       ^~~~~~~
src/error.c:154:7: error: ‘EHOSTDOWN’ undeclared (first use in this function)
  154 |  case EHOSTDOWN:
      |       ^~~~~~~~~
src/error.c:156:7: error: ‘ENOPROTOOPT’ undeclared (first use in this function)
  156 |  case ENOPROTOOPT:
      |       ^~~~~~~~~~~
src/error.c:158:7: error: ‘EIO’ undeclared (first use in this function)
  158 |  case EIO:
      |       ^~~
src/error.c:160:7: error: ‘EINVAL’ undeclared (first use in this function)
  160 |  case EINVAL:
      |       ^~~~~~
src/error.c:162:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  162 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
src/error.c:164:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  164 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
src/error.c:165:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  165 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
src/error.c:167:7: error: ‘EBADFD’ undeclared (first use in this function)
  167 |  case EBADFD:
      |       ^~~~~~
src/error.c:169:7: error: ‘ENOMEM’ undeclared (first use in this function)
  169 |  case ENOMEM:
      |       ^~~~~~
src/error.c:171:7: error: ‘EBUSY’ undeclared (first use in this function)
  171 |  case EBUSY:
      |       ^~~~~
src/error.c:173:7: error: ‘EMLINK’ undeclared (first use in this function)
  173 |  case EMLINK:
      |       ^~~~~~
src/error.c:175:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  175 |  case ETIMEDOUT:
      |       ^~~~~~~~~
src/error.c:177:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  177 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
src/error.c:179:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  179 |  case ECONNRESET:
      |       ^~~~~~~~~~
src/error.c:181:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  181 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
src/error.c:183:7: error: ‘EPROTO’ undeclared (first use in this function)
  183 |  case EPROTO:
      |       ^~~~~~
src/error.c: In function ‘btd_error_le_conn_from_errno’:
src/error.c:193:7: error: ‘EINVAL’ undeclared (first use in this function)
  193 |  case EINVAL:
      |       ^~~~~~
src/error.c:195:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  195 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
src/error.c:197:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  197 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
src/error.c:198:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  198 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
src/error.c:200:7: error: ‘EALREADY’ undeclared (first use in this function)
  200 |  case EALREADY:
      |       ^~~~~~~~
src/error.c:201:7: error: ‘EISCONN’ undeclared (first use in this function)
  201 |  case EISCONN:
      |       ^~~~~~~
src/error.c:203:7: error: ‘EBADFD’ undeclared (first use in this function)
  203 |  case EBADFD:
      |       ^~~~~~
src/error.c:205:7: error: ‘ENOMEM’ undeclared (first use in this function)
  205 |  case ENOMEM:
      |       ^~~~~~
src/error.c:207:7: error: ‘EBUSY’ undeclared (first use in this function)
  207 |  case EBUSY:
      |       ^~~~~
src/error.c:209:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  209 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
src/error.c:211:7: error: ‘EIO’ undeclared (first use in this function)
  211 |  case EIO:
      |       ^~~
src/error.c:213:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  213 |  case ETIMEDOUT:
      |       ^~~~~~~~~
src/error.c:215:7: error: ‘EMLINK’ undeclared (first use in this function)
  215 |  case EMLINK:
      |       ^~~~~~
src/error.c:217:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  217 |  case ECONNRESET:
      |       ^~~~~~~~~~
src/error.c:219:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  219 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
src/error.c:221:7: error: ‘EPROTO’ undeclared (first use in this function)
  221 |  case EPROTO:
      |       ^~~~~~
make[1]: *** [Makefile:9301: src/bluetoothd-error.o] Error 1
make: *** [Makefile:4134: all] Error 2


##############################
Test: Make Check - FAIL
Desc: Run 'make check'
Output:
src/error.c: In function ‘btd_error_bredr_conn_from_errno’:
src/error.c:151:7: error: ‘EALREADY’ undeclared (first use in this function)
  151 |  case EALREADY:
      |       ^~~~~~~~
src/error.c:151:7: note: each undeclared identifier is reported only once for each function it appears in
src/error.c:152:7: error: ‘EISCONN’ undeclared (first use in this function)
  152 |  case EISCONN:
      |       ^~~~~~~
src/error.c:154:7: error: ‘EHOSTDOWN’ undeclared (first use in this function)
  154 |  case EHOSTDOWN:
      |       ^~~~~~~~~
src/error.c:156:7: error: ‘ENOPROTOOPT’ undeclared (first use in this function)
  156 |  case ENOPROTOOPT:
      |       ^~~~~~~~~~~
src/error.c:158:7: error: ‘EIO’ undeclared (first use in this function)
  158 |  case EIO:
      |       ^~~
src/error.c:160:7: error: ‘EINVAL’ undeclared (first use in this function)
  160 |  case EINVAL:
      |       ^~~~~~
src/error.c:162:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  162 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
src/error.c:164:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  164 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
src/error.c:165:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  165 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
src/error.c:167:7: error: ‘EBADFD’ undeclared (first use in this function)
  167 |  case EBADFD:
      |       ^~~~~~
src/error.c:169:7: error: ‘ENOMEM’ undeclared (first use in this function)
  169 |  case ENOMEM:
      |       ^~~~~~
src/error.c:171:7: error: ‘EBUSY’ undeclared (first use in this function)
  171 |  case EBUSY:
      |       ^~~~~
src/error.c:173:7: error: ‘EMLINK’ undeclared (first use in this function)
  173 |  case EMLINK:
      |       ^~~~~~
src/error.c:175:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  175 |  case ETIMEDOUT:
      |       ^~~~~~~~~
src/error.c:177:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  177 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
src/error.c:179:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  179 |  case ECONNRESET:
      |       ^~~~~~~~~~
src/error.c:181:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  181 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
src/error.c:183:7: error: ‘EPROTO’ undeclared (first use in this function)
  183 |  case EPROTO:
      |       ^~~~~~
src/error.c: In function ‘btd_error_le_conn_from_errno’:
src/error.c:193:7: error: ‘EINVAL’ undeclared (first use in this function)
  193 |  case EINVAL:
      |       ^~~~~~
src/error.c:195:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  195 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
src/error.c:197:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  197 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
src/error.c:198:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  198 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
src/error.c:200:7: error: ‘EALREADY’ undeclared (first use in this function)
  200 |  case EALREADY:
      |       ^~~~~~~~
src/error.c:201:7: error: ‘EISCONN’ undeclared (first use in this function)
  201 |  case EISCONN:
      |       ^~~~~~~
src/error.c:203:7: error: ‘EBADFD’ undeclared (first use in this function)
  203 |  case EBADFD:
      |       ^~~~~~
src/error.c:205:7: error: ‘ENOMEM’ undeclared (first use in this function)
  205 |  case ENOMEM:
      |       ^~~~~~
src/error.c:207:7: error: ‘EBUSY’ undeclared (first use in this function)
  207 |  case EBUSY:
      |       ^~~~~
src/error.c:209:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  209 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
src/error.c:211:7: error: ‘EIO’ undeclared (first use in this function)
  211 |  case EIO:
      |       ^~~
src/error.c:213:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  213 |  case ETIMEDOUT:
      |       ^~~~~~~~~
src/error.c:215:7: error: ‘EMLINK’ undeclared (first use in this function)
  215 |  case EMLINK:
      |       ^~~~~~
src/error.c:217:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  217 |  case ECONNRESET:
      |       ^~~~~~~~~~
src/error.c:219:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  219 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
src/error.c:221:7: error: ‘EPROTO’ undeclared (first use in this function)
  221 |  case EPROTO:
      |       ^~~~~~
make[1]: *** [Makefile:9301: src/bluetoothd-error.o] Error 1
make: *** [Makefile:10406: check] Error 2


##############################
Test: Make Distcheck - FAIL
Desc: Run distcheck to check the distribution
Output:
../../src/error.c: In function ‘btd_error_bredr_conn_from_errno’:
../../src/error.c:151:7: error: ‘EALREADY’ undeclared (first use in this function)
  151 |  case EALREADY:
      |       ^~~~~~~~
../../src/error.c:151:7: note: each undeclared identifier is reported only once for each function it appears in
../../src/error.c:152:7: error: ‘EISCONN’ undeclared (first use in this function)
  152 |  case EISCONN:
      |       ^~~~~~~
../../src/error.c:154:7: error: ‘EHOSTDOWN’ undeclared (first use in this function)
  154 |  case EHOSTDOWN:
      |       ^~~~~~~~~
../../src/error.c:156:7: error: ‘ENOPROTOOPT’ undeclared (first use in this function)
  156 |  case ENOPROTOOPT:
      |       ^~~~~~~~~~~
../../src/error.c:158:7: error: ‘EIO’ undeclared (first use in this function)
  158 |  case EIO:
      |       ^~~
../../src/error.c:160:7: error: ‘EINVAL’ undeclared (first use in this function)
  160 |  case EINVAL:
      |       ^~~~~~
../../src/error.c:162:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  162 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
../../src/error.c:164:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  164 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
../../src/error.c:165:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  165 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
../../src/error.c:167:7: error: ‘EBADFD’ undeclared (first use in this function)
  167 |  case EBADFD:
      |       ^~~~~~
../../src/error.c:169:7: error: ‘ENOMEM’ undeclared (first use in this function)
  169 |  case ENOMEM:
      |       ^~~~~~
../../src/error.c:171:7: error: ‘EBUSY’ undeclared (first use in this function)
  171 |  case EBUSY:
      |       ^~~~~
../../src/error.c:173:7: error: ‘EMLINK’ undeclared (first use in this function)
  173 |  case EMLINK:
      |       ^~~~~~
../../src/error.c:175:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  175 |  case ETIMEDOUT:
      |       ^~~~~~~~~
../../src/error.c:177:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  177 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
../../src/error.c:179:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  179 |  case ECONNRESET:
      |       ^~~~~~~~~~
../../src/error.c:181:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  181 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
../../src/error.c:183:7: error: ‘EPROTO’ undeclared (first use in this function)
  183 |  case EPROTO:
      |       ^~~~~~
../../src/error.c: In function ‘btd_error_le_conn_from_errno’:
../../src/error.c:193:7: error: ‘EINVAL’ undeclared (first use in this function)
  193 |  case EINVAL:
      |       ^~~~~~
../../src/error.c:195:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  195 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
../../src/error.c:197:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  197 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
../../src/error.c:198:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  198 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
../../src/error.c:200:7: error: ‘EALREADY’ undeclared (first use in this function)
  200 |  case EALREADY:
      |       ^~~~~~~~
../../src/error.c:201:7: error: ‘EISCONN’ undeclared (first use in this function)
  201 |  case EISCONN:
      |       ^~~~~~~
../../src/error.c:203:7: error: ‘EBADFD’ undeclared (first use in this function)
  203 |  case EBADFD:
      |       ^~~~~~
../../src/error.c:205:7: error: ‘ENOMEM’ undeclared (first use in this function)
  205 |  case ENOMEM:
      |       ^~~~~~
../../src/error.c:207:7: error: ‘EBUSY’ undeclared (first use in this function)
  207 |  case EBUSY:
      |       ^~~~~
../../src/error.c:209:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  209 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
../../src/error.c:211:7: error: ‘EIO’ undeclared (first use in this function)
  211 |  case EIO:
      |       ^~~
../../src/error.c:213:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  213 |  case ETIMEDOUT:
      |       ^~~~~~~~~
../../src/error.c:215:7: error: ‘EMLINK’ undeclared (first use in this function)
  215 |  case EMLINK:
      |       ^~~~~~
../../src/error.c:217:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  217 |  case ECONNRESET:
      |       ^~~~~~~~~~
../../src/error.c:219:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  219 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
../../src/error.c:221:7: error: ‘EPROTO’ undeclared (first use in this function)
  221 |  case EPROTO:
      |       ^~~~~~
make[2]: *** [Makefile:9301: src/bluetoothd-error.o] Error 1
make[1]: *** [Makefile:4134: all] Error 2
make: *** [Makefile:10327: distcheck] Error 1


##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - FAIL
Desc: Build BlueZ source with '--enable-external-ell' configuration
Output:
src/error.c: In function ‘btd_error_bredr_conn_from_errno’:
src/error.c:151:7: error: ‘EALREADY’ undeclared (first use in this function)
  151 |  case EALREADY:
      |       ^~~~~~~~
src/error.c:151:7: note: each undeclared identifier is reported only once for each function it appears in
src/error.c:152:7: error: ‘EISCONN’ undeclared (first use in this function)
  152 |  case EISCONN:
      |       ^~~~~~~
src/error.c:154:7: error: ‘EHOSTDOWN’ undeclared (first use in this function)
  154 |  case EHOSTDOWN:
      |       ^~~~~~~~~
src/error.c:156:7: error: ‘ENOPROTOOPT’ undeclared (first use in this function)
  156 |  case ENOPROTOOPT:
      |       ^~~~~~~~~~~
src/error.c:158:7: error: ‘EIO’ undeclared (first use in this function)
  158 |  case EIO:
      |       ^~~
src/error.c:160:7: error: ‘EINVAL’ undeclared (first use in this function)
  160 |  case EINVAL:
      |       ^~~~~~
src/error.c:162:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  162 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
src/error.c:164:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  164 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
src/error.c:165:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  165 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
src/error.c:167:7: error: ‘EBADFD’ undeclared (first use in this function)
  167 |  case EBADFD:
      |       ^~~~~~
src/error.c:169:7: error: ‘ENOMEM’ undeclared (first use in this function)
  169 |  case ENOMEM:
      |       ^~~~~~
src/error.c:171:7: error: ‘EBUSY’ undeclared (first use in this function)
  171 |  case EBUSY:
      |       ^~~~~
src/error.c:173:7: error: ‘EMLINK’ undeclared (first use in this function)
  173 |  case EMLINK:
      |       ^~~~~~
src/error.c:175:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  175 |  case ETIMEDOUT:
      |       ^~~~~~~~~
src/error.c:177:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  177 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
src/error.c:179:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  179 |  case ECONNRESET:
      |       ^~~~~~~~~~
src/error.c:181:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  181 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
src/error.c:183:7: error: ‘EPROTO’ undeclared (first use in this function)
  183 |  case EPROTO:
      |       ^~~~~~
src/error.c: In function ‘btd_error_le_conn_from_errno’:
src/error.c:193:7: error: ‘EINVAL’ undeclared (first use in this function)
  193 |  case EINVAL:
      |       ^~~~~~
src/error.c:195:7: error: ‘EHOSTUNREACH’ undeclared (first use in this function)
  195 |  case EHOSTUNREACH:
      |       ^~~~~~~~~~~~
src/error.c:197:7: error: ‘EOPNOTSUPP’ undeclared (first use in this function)
  197 |  case EOPNOTSUPP:
      |       ^~~~~~~~~~
src/error.c:198:7: error: ‘EPROTONOSUPPORT’ undeclared (first use in this function)
  198 |  case EPROTONOSUPPORT:
      |       ^~~~~~~~~~~~~~~
src/error.c:200:7: error: ‘EALREADY’ undeclared (first use in this function)
  200 |  case EALREADY:
      |       ^~~~~~~~
src/error.c:201:7: error: ‘EISCONN’ undeclared (first use in this function)
  201 |  case EISCONN:
      |       ^~~~~~~
src/error.c:203:7: error: ‘EBADFD’ undeclared (first use in this function)
  203 |  case EBADFD:
      |       ^~~~~~
src/error.c:205:7: error: ‘ENOMEM’ undeclared (first use in this function)
  205 |  case ENOMEM:
      |       ^~~~~~
src/error.c:207:7: error: ‘EBUSY’ undeclared (first use in this function)
  207 |  case EBUSY:
      |       ^~~~~
src/error.c:209:7: error: ‘ECONNREFUSED’ undeclared (first use in this function)
  209 |  case ECONNREFUSED:
      |       ^~~~~~~~~~~~
src/error.c:211:7: error: ‘EIO’ undeclared (first use in this function)
  211 |  case EIO:
      |       ^~~
src/error.c:213:7: error: ‘ETIMEDOUT’ undeclared (first use in this function)
  213 |  case ETIMEDOUT:
      |       ^~~~~~~~~
src/error.c:215:7: error: ‘EMLINK’ undeclared (first use in this function)
  215 |  case EMLINK:
      |       ^~~~~~
src/error.c:217:7: error: ‘ECONNRESET’ undeclared (first use in this function)
  217 |  case ECONNRESET:
      |       ^~~~~~~~~~
src/error.c:219:7: error: ‘ECONNABORTED’ undeclared (first use in this function)
  219 |  case ECONNABORTED:
      |       ^~~~~~~~~~~~
src/error.c:221:7: error: ‘EPROTO’ undeclared (first use in this function)
  221 |  case EPROTO:
      |       ^~~~~~
make[1]: *** [Makefile:9301: src/bluetoothd-error.o] Error 1
make: *** [Makefile:4134: all] Error 2




---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/doc/error-code.txt b/doc/error-code.txt
new file mode 100644
index 000000000..af8300467
--- /dev/null
+++ b/doc/error-code.txt
@@ -0,0 +1,266 @@ 
+D-Bus Method Return Error Codes
+===============================
+
+The motivation of having detailed error codes is to provide context-based
+failure reasons along with D-Bus method return so that D-Bus clients can
+build metrics and optimize their application based on these failure reasons.
+For instance, a client can build retry mechanism for a connection failure or
+improve the bottleneck of use scenario based on actionable metrics.
+
+These error codes are context-based but not necessarily tied to interface or
+method calls. For instance, if a pairing request failed due to connection
+failure, connection error would be attached to the method return of Pair().
+
+BR/EDR connection already connected
+===================================
+	code:	0x0001
+	errno:	EALREADY, EISCONN
+
+Either the profile is already connected or ACL connection is in place.
+
+BR/EDR connection page timeout
+==============================
+	code:	0x0002
+	errno:	EHOSTDOWN
+
+Failed due to page timeout.
+
+BR/EDR connection profile unavailable
+=====================================
+	code:	0x0003
+	errno:	ENOPROTOOPT
+
+Failed to find connectable services or the target service.
+
+BR/EDR connection SDP search
+============================
+	code:	0x0004
+	errno:	none
+
+Failed to complete the SDP search.
+
+BR/EDR connection create socket
+===============================
+	code:	0x0005
+	errno:	EIO
+
+Failed to create or connect to BT IO socket. This can also indicate hardware
+failure in the controller.
+
+BR/EDR connection invalid arguments
+===================================
+	code:	0x0006
+	errno:	EHOSTUNREACH
+
+Failed due to invalid arguments.
+
+BR/EDR connection not powered
+=============================
+	code:	0x0007
+	errno:	EHOSTUNREACH
+
+Failed due to adapter not powered.
+
+BR/EDR connection not supported
+===============================
+	code:	0x0008
+	errno:	EOPNOTSUPP, EPROTONOSUPPORT
+
+Failed due to unsupported state transition of L2CAP channel or other features
+either by the local host or the remote.
+
+BR/EDR connection bad socket
+============================
+	code:	0x0009
+	errno:	EBADFD
+
+Failed due to the socket is in bad state.
+
+BR/EDR connection memory allocation
+===================================
+	code:	0x000A
+	errno:	ENOMEM
+
+Failed to allocate memory in either host stack or controller.
+
+BR/EDR connection busy
+======================
+	code:	0x000B
+	errno:	EBUSY
+
+Failed due to other ongoing operations, such as pairing, busy L2CAP channel or
+the operation disallowed by the controller.
+
+BR/EDR connection concurrent connection limit
+=============================================
+	code:	0x000C
+	errno:	EMLINK
+
+Failed due to reaching the concurrent connection limit to a device.
+
+BR/EDR connection timeout
+=========================
+	code:	0x000D
+	errno:	ETIMEDOUT
+
+Failed due to connection timeout
+
+BR/EDR connection refused
+=========================
+	code:	0x000E
+	errno:	ECONNREFUSED
+
+Refused by the remote device due to limited resource, security reason or
+unacceptable address type.
+
+BR/EDR connection aborted by remote
+===================================
+	code:	0x000F
+	errno:	ECONNRESET
+
+Terminated by the remote device due to limited resource or power off.
+
+BR/EDR connection aborted by local
+==================================
+	code:	0x0010
+	errno:	ECONNABORTED
+
+Aborted by the local host.
+
+BR/EDR connection protocol error
+================================
+	code:	0x0011
+	errno:	EPROTO
+
+Failed due to LMP protocol error.
+
+BR/EDR connection canceled
+==========================
+	code:	0x0012
+	errno:	none
+
+Failed due to cancellation caused by adapter drop, unexpected device drop, or
+incoming disconnection request before connection request is completed.
+
+BR/EDR connection unknown error
+===============================
+	code:	0x0013
+	errno:	ENOSYS
+
+Failed due to unknown reason.
+
+LE connection invalid arguments
+===============================
+	code:	0x0101
+	errno:	EINVAL
+
+Failed due to invalid arguments.
+
+LE connection not powered
+=========================
+	code:	0x0102
+	errno:	EHOSTUNREACH
+
+Failed due to adapter not powered.
+
+LE connection not supported
+===========================
+	code:	0x0103
+	errno:	EOPNOTSUPP, EPROTONOSUPPORT
+
+Failed due to unsupported state transition of L2CAP channel or other features
+(e.g. LE features) either by the local host or the remote.
+
+LE connection already connected
+===============================
+	code:	0x0104
+	errno: EALREADY, EISCONN
+
+Either the BT IO is already connected or LE link connection in place.
+
+LE connection bad socket
+========================
+	code:	0x0105
+	errno: EBADFD
+
+Failed due to the socket is in bad state.
+
+LE connection memory allocation
+===============================
+	code:	0x0106
+	errno: ENOMEM
+
+Failed to allocate memory in either host stack or controller.
+
+LE connection busy
+==================
+	code:	0x0107
+	errno:	EBUSY
+
+Failed due to other ongoing operations, such as pairing, connecting, busy
+L2CAP channel or the operation disallowed by the controller.
+
+LE connection refused
+=====================
+	code:	0x0108
+	errno:	ECONNREFUSED
+
+Failed due to that LE is not enabled or the attempt is refused by the remote
+device due to limited resource, security reason or unacceptable address type.
+
+LE connection create socket
+===========================
+	code:	0x0109
+	errno:	EIO
+
+Failed to create or connect to BT IO socket. This can also indicate hardware
+failure in the controller.
+
+LE connection timeout
+=====================
+	code:	0x010A
+	errno:	ETIMEDOUT
+
+Failed due to connection timeout
+
+LE connection concurrent connection limit
+=========================================
+	code:	0x010B
+	errno:	EMLINK
+
+Failed due to reaching the synchronous connection limit to a device.
+
+LE connection abort by remote
+=============================
+	code:	0x010C
+	errno:	ECONNRESET
+
+Aborted by the remote device due to limited resource or power off.
+
+LE connection abort by local
+============================
+	code:	0x010D
+	errno:	ECONNABORTED
+
+Aborted by the local host.
+
+LE connection link layer protocol error
+=======================================
+	code:	0x010E
+	errno:	EPROTO
+
+Failed due to link layer protocol error.
+
+LE connection GATT browsing
+===========================
+	code:	0x010F
+	errno:	none
+
+Failed to complete the GATT browsing.
+
+LE connection unknown error
+===========================
+	code:	0x0110
+	errno:	ENOSYS
+
+ Failed due to unknown reason.