new file mode 100644
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch C_CAN/D_CAN controller Device Tree Bindings
+
+description: Bosch C_CAN/D_CAN controller for CAN bus
+
+maintainers:
+ - Dario Binacchi <dariobin@libero.it>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - bosch,c_can
+ - bosch,d_can
+ - ti,dra7-d_can
+ - ti,am3352-d_can
+ - items:
+ - enum:
+ - ti,am4372-d_can
+ - const: ti,am3352-d_can
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: |
+ Should contain a phandle to a PM domain provider node and an args
+ specifier containing the DCAN device id value. It's mandatory for
+ Keystone 2 66AK2G SoCs only.
+ See, Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt.
+ maxItems: 1
+
+ clocks:
+ description: |
+ CAN functional clock phandle.
+ See, Documentation/devicetree/bindings/clock/ti,sci-clk.txt.
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ syscon-raminit:
+ description: |
+ Handle to system control region that contains the RAMINIT register,
+ register offset to the RAMINIT register and the CAN instance number (0
+ offset).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ can@481d0000 {
+ compatible = "bosch,d_can";
+ reg = <0x481d0000 0x2000>;
+ interrupts = <55>;
+ interrupt-parent = <&intc>;
+ status = "disabled";
+ };
+ - |
+ can@0 {
+ compatible = "ti,am3352-d_can";
+ reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&scm_conf 0x644 1>;
+ interrupts = <55>;
+ status = "disabled";
+ };
deleted file mode 100644
@@ -1,65 +0,0 @@
-Bosch C_CAN/D_CAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible : Should be "bosch,c_can" for C_CAN controllers and
- "bosch,d_can" for D_CAN controllers.
- Can be "ti,dra7-d_can", "ti,am3352-d_can" or
- "ti,am4372-d_can".
-- reg : physical base address and size of the C_CAN/D_CAN
- registers map
-- interrupts : property with a value describing the interrupt
- number
-
-The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only:
-- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the
- instance number
-
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
-- power-domains : Should contain a phandle to a PM domain provider node
- and an args specifier containing the DCAN device id
- value. This property is as per the binding,
- Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
-- clocks : CAN functional clock phandle. This property is as per the
- binding,
- Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
-
-Optional properties:
-- syscon-raminit : Handle to system control region that contains the
- RAMINIT register, register offset to the RAMINIT
- register and the CAN instance number (0 offset).
-
-Note: "ti,hwmods" field is used to fetch the base address and irq
-resources from TI, omap hwmod data base during device registration.
-Future plan is to migrate hwmod data base contents into device tree
-blob so that, all the required data will be used from device tree dts
-file.
-
-Example:
-
-Step1: SoC common .dtsi file
-
- dcan1: d_can@481d0000 {
- compatible = "bosch,d_can";
- reg = <0x481d0000 0x2000>;
- interrupts = <55>;
- interrupt-parent = <&intc>;
- status = "disabled";
- };
-
-(or)
-
- dcan1: d_can@481d0000 {
- compatible = "bosch,d_can";
- ti,hwmods = "d_can1";
- reg = <0x481d0000 0x2000>;
- interrupts = <55>;
- interrupt-parent = <&intc>;
- status = "disabled";
- };
-
-Step 2: board specific .dts file
-
- &dcan1 {
- status = "okay";
- };
Convert the Bosch C_CAN/D_CAN controller device tree binding documentation to json-schema. Document missing properties. Remove "ti,hwmods" as it is no longer used in TI dts. Make "clocks" required as it is used in all dts. Correct nodename in the example. Signed-off-by: Dario Binacchi <dariobin@libero.it> --- .../bindings/net/can/bosch,c_can.yaml | 85 +++++++++++++++++++ .../devicetree/bindings/net/can/c_can.txt | 65 -------------- 2 files changed, 85 insertions(+), 65 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt