| Message ID | 20210721194951.30983-3-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Renesas RZ/G2L CANFD support | expand |
Hi Prabhakar, On Wed, Jul 21, 2021 at 9:50 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > CANFD block on RZ/G2L SoC is almost identical to one found on > R-Car Gen3 SoC's. On RZ/G2L SoC interrupt sources for each channel > are split into different sources and the IP doesn't divide (1/2) > CANFD clock within the IP. > > This patch adds compatible string for RZ/G2L family and registers > the irq handlers required for CANFD operation. IRQ numbers are now > fetched based on names instead of indices. For backward compatibility > on non RZ/G2L SoC's we fallback reading based on indices. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Thanks for the update! I think you misunderstood my comment on v1 about the interrupt handlers, cfr. below. > --- a/drivers/net/can/rcar/rcar_canfd.c > +++ b/drivers/net/can/rcar/rcar_canfd.c > @@ -1577,6 +1586,53 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, > priv->can.clock.freq = fcan_freq; > dev_info(&pdev->dev, "can_clk rate is %u\n", priv->can.clock.freq); > > + if (gpriv->chip_id == RENESAS_RZG2L) { > + char *irq_name; > + int err_irq; > + int tx_irq; > + > + err_irq = platform_get_irq_byname(pdev, ch == 0 ? "ch0_err" : "ch1_err"); > + if (err_irq < 0) { > + err = err_irq; > + goto fail; > + } > + > + tx_irq = platform_get_irq_byname(pdev, ch == 0 ? "ch0_trx" : "ch1_trx"); > + if (tx_irq < 0) { > + err = tx_irq; > + goto fail; > + } > + > + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, > + "canfd.ch%d_err", ch); > + if (!irq_name) { > + err = -ENOMEM; > + goto fail; > + } > + err = devm_request_irq(&pdev->dev, err_irq, > + rcar_canfd_channel_interrupt, 0, This is the same interrupt handler... > + irq_name, gpriv); > + if (err) { > + dev_err(&pdev->dev, "devm_request_irq CH Err(%d) failed, error %d\n", > + err_irq, err); > + goto fail; > + } > + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, > + "canfd.ch%d_trx", ch); > + if (!irq_name) { > + err = -ENOMEM; > + goto fail; > + } > + err = devm_request_irq(&pdev->dev, tx_irq, > + rcar_canfd_channel_interrupt, 0, ... as this one. > + irq_name, gpriv); > + if (err) { > + dev_err(&pdev->dev, "devm_request_irq Tx (%d) failed, error %d\n", > + tx_irq, err); > + goto fail; > + } > + } > + > if (gpriv->fdmode) { > priv->can.bittiming_const = &rcar_canfd_nom_bittiming_const; > priv->can.data_bittiming_const = > @@ -1711,20 +1798,51 @@ static int rcar_canfd_probe(struct platform_device *pdev) > gpriv->base = addr; > > /* Request IRQ that's common for both channels */ > - err = devm_request_irq(&pdev->dev, ch_irq, > - rcar_canfd_channel_interrupt, 0, > - "canfd.chn", gpriv); > - if (err) { > - dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > - ch_irq, err); > - goto fail_dev; > + if (gpriv->chip_id == RENESAS_RCAR_GEN3) { > + err = devm_request_irq(&pdev->dev, ch_irq, > + rcar_canfd_channel_interrupt, 0, > + "canfd.ch_int", gpriv); > + if (err) { > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > + ch_irq, err); > + goto fail_dev; > + } > + > + err = devm_request_irq(&pdev->dev, g_irq, > + rcar_canfd_global_interrupt, 0, > + "canfd.g_int", gpriv); > + if (err) { > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > + g_irq, err); > + goto fail_dev; > + } > + } else { > + err = devm_request_irq(&pdev->dev, g_recc_irq, > + rcar_canfd_global_interrupt, 0, This is the same interrupt handler... > + "canfd.g_recc", gpriv); > + > + if (err) { > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > + g_recc_irq, err); > + goto fail_dev; > + } > + > + err = devm_request_irq(&pdev->dev, g_err_irq, > + rcar_canfd_global_interrupt, 0, ... as this one. > + "canfd.g_err", gpriv); > + if (err) { > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > + g_err_irq, err); > + goto fail_dev; > + } > } > - err = devm_request_irq(&pdev->dev, g_irq, > - rcar_canfd_global_interrupt, 0, > - "canfd.gbl", gpriv); > + > + err = reset_control_reset(gpriv->rstc1); > + if (err) > + goto fail_dev; > + err = reset_control_reset(gpriv->rstc2); > if (err) { > - dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > - g_irq, err); > + reset_control_assert(gpriv->rstc1); > goto fail_dev; > } I did not object to having fine-grained interrupt handlers on RZ/G2L. I did object to duplicating code in global and fine-grained interrupt handlers. The trick to have both is to let the global interrupt handlers call (conditionally) into the fine-grained handlers. In pseudo-code: global_interrupt_handler() { if (...) fine_grained_handler1(); if (...) fine_grained_handler2(); ... } On R-Car Gen3, you register the global interrupt handlers, as before. On RZ/G2L, you register the fine-grained interrupt handlers instead. Gr{oetje,eeting}s, Geert
Hi Geert, Thank you for the review. On Mon, Jul 26, 2021 at 10:53 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Wed, Jul 21, 2021 at 9:50 PM Lad Prabhakar > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > CANFD block on RZ/G2L SoC is almost identical to one found on > > R-Car Gen3 SoC's. On RZ/G2L SoC interrupt sources for each channel > > are split into different sources and the IP doesn't divide (1/2) > > CANFD clock within the IP. > > > > This patch adds compatible string for RZ/G2L family and registers > > the irq handlers required for CANFD operation. IRQ numbers are now > > fetched based on names instead of indices. For backward compatibility > > on non RZ/G2L SoC's we fallback reading based on indices. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Thanks for the update! > > I think you misunderstood my comment on v1 about the interrupt > handlers, cfr. below. > Argh my bad I took it the other way round! > > --- a/drivers/net/can/rcar/rcar_canfd.c > > +++ b/drivers/net/can/rcar/rcar_canfd.c > > > @@ -1577,6 +1586,53 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, > > priv->can.clock.freq = fcan_freq; > > dev_info(&pdev->dev, "can_clk rate is %u\n", priv->can.clock.freq); > > > > + if (gpriv->chip_id == RENESAS_RZG2L) { > > + char *irq_name; > > + int err_irq; > > + int tx_irq; > > + > > + err_irq = platform_get_irq_byname(pdev, ch == 0 ? "ch0_err" : "ch1_err"); > > + if (err_irq < 0) { > > + err = err_irq; > > + goto fail; > > + } > > + > > + tx_irq = platform_get_irq_byname(pdev, ch == 0 ? "ch0_trx" : "ch1_trx"); > > + if (tx_irq < 0) { > > + err = tx_irq; > > + goto fail; > > + } > > + > > + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, > > + "canfd.ch%d_err", ch); > > + if (!irq_name) { > > + err = -ENOMEM; > > + goto fail; > > + } > > + err = devm_request_irq(&pdev->dev, err_irq, > > + rcar_canfd_channel_interrupt, 0, > > This is the same interrupt handler... > > > + irq_name, gpriv); > > + if (err) { > > + dev_err(&pdev->dev, "devm_request_irq CH Err(%d) failed, error %d\n", > > + err_irq, err); > > + goto fail; > > + } > > + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, > > + "canfd.ch%d_trx", ch); > > + if (!irq_name) { > > + err = -ENOMEM; > > + goto fail; > > + } > > + err = devm_request_irq(&pdev->dev, tx_irq, > > + rcar_canfd_channel_interrupt, 0, > > ... as this one. > > > + irq_name, gpriv); > > + if (err) { > > + dev_err(&pdev->dev, "devm_request_irq Tx (%d) failed, error %d\n", > > + tx_irq, err); > > + goto fail; > > + } > > + } > > + > > if (gpriv->fdmode) { > > priv->can.bittiming_const = &rcar_canfd_nom_bittiming_const; > > priv->can.data_bittiming_const = > > > @@ -1711,20 +1798,51 @@ static int rcar_canfd_probe(struct platform_device *pdev) > > gpriv->base = addr; > > > > /* Request IRQ that's common for both channels */ > > - err = devm_request_irq(&pdev->dev, ch_irq, > > - rcar_canfd_channel_interrupt, 0, > > - "canfd.chn", gpriv); > > - if (err) { > > - dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > > - ch_irq, err); > > - goto fail_dev; > > + if (gpriv->chip_id == RENESAS_RCAR_GEN3) { > > + err = devm_request_irq(&pdev->dev, ch_irq, > > + rcar_canfd_channel_interrupt, 0, > > + "canfd.ch_int", gpriv); > > + if (err) { > > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > > + ch_irq, err); > > + goto fail_dev; > > + } > > + > > + err = devm_request_irq(&pdev->dev, g_irq, > > + rcar_canfd_global_interrupt, 0, > > + "canfd.g_int", gpriv); > > + if (err) { > > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > > + g_irq, err); > > + goto fail_dev; > > + } > > + } else { > > + err = devm_request_irq(&pdev->dev, g_recc_irq, > > + rcar_canfd_global_interrupt, 0, > > This is the same interrupt handler... > > > + "canfd.g_recc", gpriv); > > + > > + if (err) { > > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > > + g_recc_irq, err); > > + goto fail_dev; > > + } > > + > > + err = devm_request_irq(&pdev->dev, g_err_irq, > > + rcar_canfd_global_interrupt, 0, > > ... as this one. > > > + "canfd.g_err", gpriv); > > + if (err) { > > + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > > + g_err_irq, err); > > + goto fail_dev; > > + } > > } > > - err = devm_request_irq(&pdev->dev, g_irq, > > - rcar_canfd_global_interrupt, 0, > > - "canfd.gbl", gpriv); > > + > > + err = reset_control_reset(gpriv->rstc1); > > + if (err) > > + goto fail_dev; > > + err = reset_control_reset(gpriv->rstc2); > > if (err) { > > - dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", > > - g_irq, err); > > + reset_control_assert(gpriv->rstc1); > > goto fail_dev; > > } > > I did not object to having fine-grained interrupt handlers on RZ/G2L. > I did object to duplicating code in global and fine-grained interrupt > handlers. > > The trick to have both is to let the global interrupt handlers call > (conditionally) into the fine-grained handlers. In pseudo-code: > > global_interrupt_handler() > { > if (...) > fine_grained_handler1(); > > if (...) > fine_grained_handler2(); > ... > } > > On R-Car Gen3, you register the global interrupt handlers, as before. > On RZ/G2L, you register the fine-grained interrupt handlers instead. > Agreed will re-spin with the fine-grained version tomorrow. Cheers, Prabhakar > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 311e6ca3bdc4..04747573fc48 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -37,9 +37,15 @@ #include <linux/bitmap.h> #include <linux/bitops.h> #include <linux/iopoll.h> +#include <linux/reset.h> #define RCANFD_DRV_NAME "rcar_canfd" +enum rcanfd_chip_id { + RENESAS_RCAR_GEN3 = 0, + RENESAS_RZG2L, +}; + /* Global register bits */ /* RSCFDnCFDGRMCFG */ @@ -513,6 +519,9 @@ struct rcar_canfd_global { enum rcar_canfd_fcanclk fcan; /* CANFD or Ext clock */ unsigned long channels_mask; /* Enabled channels mask */ bool fdmode; /* CAN FD or Classical CAN only mode */ + struct reset_control *rstc1; + struct reset_control *rstc2; + enum rcanfd_chip_id chip_id; }; /* CAN FD mode nominal rate constants */ @@ -1577,6 +1586,53 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, priv->can.clock.freq = fcan_freq; dev_info(&pdev->dev, "can_clk rate is %u\n", priv->can.clock.freq); + if (gpriv->chip_id == RENESAS_RZG2L) { + char *irq_name; + int err_irq; + int tx_irq; + + err_irq = platform_get_irq_byname(pdev, ch == 0 ? "ch0_err" : "ch1_err"); + if (err_irq < 0) { + err = err_irq; + goto fail; + } + + tx_irq = platform_get_irq_byname(pdev, ch == 0 ? "ch0_trx" : "ch1_trx"); + if (tx_irq < 0) { + err = tx_irq; + goto fail; + } + + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "canfd.ch%d_err", ch); + if (!irq_name) { + err = -ENOMEM; + goto fail; + } + err = devm_request_irq(&pdev->dev, err_irq, + rcar_canfd_channel_interrupt, 0, + irq_name, gpriv); + if (err) { + dev_err(&pdev->dev, "devm_request_irq CH Err(%d) failed, error %d\n", + err_irq, err); + goto fail; + } + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "canfd.ch%d_trx", ch); + if (!irq_name) { + err = -ENOMEM; + goto fail; + } + err = devm_request_irq(&pdev->dev, tx_irq, + rcar_canfd_channel_interrupt, 0, + irq_name, gpriv); + if (err) { + dev_err(&pdev->dev, "devm_request_irq Tx (%d) failed, error %d\n", + tx_irq, err); + goto fail; + } + } + if (gpriv->fdmode) { priv->can.bittiming_const = &rcar_canfd_nom_bittiming_const; priv->can.data_bittiming_const = @@ -1636,7 +1692,11 @@ static int rcar_canfd_probe(struct platform_device *pdev) struct device_node *of_child; unsigned long channels_mask = 0; int err, ch_irq, g_irq; + int g_err_irq, g_recc_irq; bool fdmode = true; /* CAN FD only mode - default */ + enum rcanfd_chip_id chip_id; + + chip_id = (enum rcanfd_chip_id)of_device_get_match_data(&pdev->dev); if (of_property_read_bool(pdev->dev.of_node, "renesas,no-can-fd")) fdmode = false; /* Classical CAN only mode */ @@ -1649,16 +1709,30 @@ static int rcar_canfd_probe(struct platform_device *pdev) if (of_child && of_device_is_available(of_child)) channels_mask |= BIT(1); /* Channel 1 */ - ch_irq = platform_get_irq(pdev, 0); - if (ch_irq < 0) { - err = ch_irq; - goto fail_dev; - } + if (chip_id == RENESAS_RCAR_GEN3) { + ch_irq = platform_get_irq_byname_optional(pdev, "ch_int"); + if (ch_irq < 0) { + /* For backward compatibility get irq by index */ + ch_irq = platform_get_irq(pdev, 0); + if (ch_irq < 0) + return ch_irq; + } - g_irq = platform_get_irq(pdev, 1); - if (g_irq < 0) { - err = g_irq; - goto fail_dev; + g_irq = platform_get_irq_byname_optional(pdev, "g_int"); + if (g_irq < 0) { + /* For backward compatibility get irq by index */ + g_irq = platform_get_irq(pdev, 1); + if (g_irq < 0) + return g_irq; + } + } else { + g_err_irq = platform_get_irq_byname(pdev, "g_err"); + if (g_err_irq < 0) + return g_err_irq; + + g_recc_irq = platform_get_irq_byname(pdev, "g_recc"); + if (g_recc_irq < 0) + return g_recc_irq; } /* Global controller context */ @@ -1670,6 +1744,19 @@ static int rcar_canfd_probe(struct platform_device *pdev) gpriv->pdev = pdev; gpriv->channels_mask = channels_mask; gpriv->fdmode = fdmode; + gpriv->chip_id = chip_id; + + if (gpriv->chip_id == RENESAS_RZG2L) { + gpriv->rstc1 = devm_reset_control_get_exclusive(&pdev->dev, "rstp_n"); + if (IS_ERR(gpriv->rstc1)) + return dev_err_probe(&pdev->dev, PTR_ERR(gpriv->rstc1), + "failed to get rstp_n\n"); + + gpriv->rstc2 = devm_reset_control_get_exclusive(&pdev->dev, "rstc_n"); + if (IS_ERR(gpriv->rstc2)) + return dev_err_probe(&pdev->dev, PTR_ERR(gpriv->rstc2), + "failed to get rstc_n\n"); + } /* Peripheral clock */ gpriv->clkp = devm_clk_get(&pdev->dev, "fck"); @@ -1699,7 +1786,7 @@ static int rcar_canfd_probe(struct platform_device *pdev) } fcan_freq = clk_get_rate(gpriv->can_clk); - if (gpriv->fcan == RCANFD_CANFDCLK) + if (gpriv->fcan == RCANFD_CANFDCLK && gpriv->chip_id == RENESAS_RCAR_GEN3) /* CANFD clock is further divided by (1/2) within the IP */ fcan_freq /= 2; @@ -1711,20 +1798,51 @@ static int rcar_canfd_probe(struct platform_device *pdev) gpriv->base = addr; /* Request IRQ that's common for both channels */ - err = devm_request_irq(&pdev->dev, ch_irq, - rcar_canfd_channel_interrupt, 0, - "canfd.chn", gpriv); - if (err) { - dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", - ch_irq, err); - goto fail_dev; + if (gpriv->chip_id == RENESAS_RCAR_GEN3) { + err = devm_request_irq(&pdev->dev, ch_irq, + rcar_canfd_channel_interrupt, 0, + "canfd.ch_int", gpriv); + if (err) { + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", + ch_irq, err); + goto fail_dev; + } + + err = devm_request_irq(&pdev->dev, g_irq, + rcar_canfd_global_interrupt, 0, + "canfd.g_int", gpriv); + if (err) { + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", + g_irq, err); + goto fail_dev; + } + } else { + err = devm_request_irq(&pdev->dev, g_recc_irq, + rcar_canfd_global_interrupt, 0, + "canfd.g_recc", gpriv); + + if (err) { + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", + g_recc_irq, err); + goto fail_dev; + } + + err = devm_request_irq(&pdev->dev, g_err_irq, + rcar_canfd_global_interrupt, 0, + "canfd.g_err", gpriv); + if (err) { + dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", + g_err_irq, err); + goto fail_dev; + } } - err = devm_request_irq(&pdev->dev, g_irq, - rcar_canfd_global_interrupt, 0, - "canfd.gbl", gpriv); + + err = reset_control_reset(gpriv->rstc1); + if (err) + goto fail_dev; + err = reset_control_reset(gpriv->rstc2); if (err) { - dev_err(&pdev->dev, "devm_request_irq(%d) failed, error %d\n", - g_irq, err); + reset_control_assert(gpriv->rstc1); goto fail_dev; } @@ -1733,7 +1851,7 @@ static int rcar_canfd_probe(struct platform_device *pdev) if (err) { dev_err(&pdev->dev, "failed to enable peripheral clock, error %d\n", err); - goto fail_dev; + goto fail_reset; } err = rcar_canfd_reset_controller(gpriv); @@ -1790,6 +1908,9 @@ static int rcar_canfd_probe(struct platform_device *pdev) rcar_canfd_disable_global_interrupts(gpriv); fail_clk: clk_disable_unprepare(gpriv->clkp); +fail_reset: + reset_control_assert(gpriv->rstc1); + reset_control_assert(gpriv->rstc2); fail_dev: return err; } @@ -1810,6 +1931,9 @@ static int rcar_canfd_remove(struct platform_device *pdev) /* Enter global sleep mode */ rcar_canfd_set_bit(gpriv->base, RCANFD_GCTR, RCANFD_GCTR_GSLPR); clk_disable_unprepare(gpriv->clkp); + reset_control_assert(gpriv->rstc1); + reset_control_assert(gpriv->rstc2); + return 0; } @@ -1827,7 +1951,8 @@ static SIMPLE_DEV_PM_OPS(rcar_canfd_pm_ops, rcar_canfd_suspend, rcar_canfd_resume); static const struct of_device_id rcar_canfd_of_table[] = { - { .compatible = "renesas,rcar-gen3-canfd" }, + { .compatible = "renesas,rcar-gen3-canfd", .data = (void *)RENESAS_RCAR_GEN3 }, + { .compatible = "renesas,rzg2l-canfd", .data = (void *)RENESAS_RZG2L }, { } };