diff mbox series

[2/2] phy: mediatek: phy-mtk-tphy: support USB2UART switch

Message ID 1627383013-4535-2-git-send-email-macpaul.lin@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [1/2] phy: introduce phy mode PHY_MODE_UART and phy_get_mode_ext() | expand

Commit Message

Macpaul Lin July 27, 2021, 10:50 a.m. UTC 
Some embedded platform shared PINs between USB and UART.
For example, some phone will use special cable detection in boot loader
to switch USB port function into UART mode.

This patch support USB2UART switch function in phy-mtk-tphy.
1. Implement USB2UART switch API support in phy-mtk-tphy.
2. Use PHY_MODE_UART support according to new mode in phy.h.
3. Use mtk_phy_get_mode_ext() to query the current MODE from hardware.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 drivers/phy/mediatek/phy-mtk-tphy.c |  114 +++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)

Comments

Chunfeng Yun July 28, 2021, 1:55 a.m. UTC | #1 
On Tue, 2021-07-27 at 18:50 +0800, Macpaul Lin wrote:
> Some embedded platform shared PINs between USB and UART.
> For example, some phone will use special cable detection in boot loader
> to switch USB port function into UART mode.
> 
> This patch support USB2UART switch function in phy-mtk-tphy.
> 1. Implement USB2UART switch API support in phy-mtk-tphy.
> 2. Use PHY_MODE_UART support according to new mode in phy.h.
> 3. Use mtk_phy_get_mode_ext() to query the current MODE from hardware.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> ---
>  drivers/phy/mediatek/phy-mtk-tphy.c |  114 +++++++++++++++++++++++++++++++++++
>  1 file changed, 114 insertions(+)
> 
title: please use "phy: phy-mtk-tphy: ..."  as other patches


> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> index cdbcc49..a7dfeec 100644
> --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> @@ -68,6 +68,7 @@
>  #define PA6_RG_U2_SQTH_VAL(x)	(0xf & (x))
>  
>  #define U3P_U2PHYACR4		0x020
> +#define P2C_RG_USB20_DM_100K_EN		BIT(17)
>  #define P2C_RG_USB20_GPIO_CTL		BIT(9)
>  #define P2C_USB20_GPIO_MODE		BIT(8)
>  #define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> @@ -76,6 +77,12 @@
>  #define P2C_RG_SIF_U2PLL_FORCE_ON	BIT(24)
>  
>  #define U3P_U2PHYDTM0		0x068
> +#define P2C_RG_UART_MODE		GENMASK(31, 30)
> +#define P2C_RG_UART_MODE_VAL(x)		((0x3 & (x)) << 30)
> +#define P2C_RG_UART_MODE_OFET		(30)
> +#define P2C_FORCE_UART_I		BIT(29)
> +#define P2C_FORCE_UART_BIAS_EN		BIT(28)
> +#define P2C_FORCE_UART_TX_OE		BIT(27)
>  #define P2C_FORCE_UART_EN		BIT(26)
>  #define P2C_FORCE_DATAIN		BIT(23)
>  #define P2C_FORCE_DM_PULLDOWN		BIT(21)
> @@ -98,6 +105,8 @@
>  		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
>  
>  #define U3P_U2PHYDTM1		0x06C
> +#define P2C_RG_UART_BIAS_EN		BIT(18)
> +#define P2C_RG_UART_TX_OE		BIT(17)
>  #define P2C_RG_UART_EN			BIT(16)
>  #define P2C_FORCE_IDDIG		BIT(9)
>  #define P2C_RG_VBUSVALID		BIT(5)
> @@ -600,6 +609,90 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
>  	}
>  }
>  
> +static void u2_phy_instance_set_mode_2uart(struct u2phy_banks *u2_banks)
> +{
> +	u32 tmp;
> +
> +	/* Clear PA6_RG_U2_BC11_SW_EN */
remove the comments
> +	tmp = readl(u2_banks->com + U3P_USBPHYACR6);
> +	tmp &= ~(PA6_RG_U2_BC11_SW_EN);
> +	writel(tmp, u2_banks->com + U3P_USBPHYACR6);
> +
> +	/* Set P2C_RG_SUSPENDM */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_RG_SUSPENDM;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_FORCE_SUSPENDM */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_FORCE_SUSPENDM;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Clear and Set P2C_RG_UART_MODE to 2'b01 */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp &= ~(P2C_RG_UART_MODE);
> +	tmp |= P2C_RG_UART_MODE_VAL(0x1);
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Clear P2C_FORCE_UART_I */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp &= ~(P2C_FORCE_UART_I);
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_FORCE_UART_BIAS_EN */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_FORCE_UART_BIAS_EN;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_FORCE_UART_TX_OE */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_FORCE_UART_TX_OE;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_FORCE_UART_EN */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_FORCE_UART_EN;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_RG_UART_BIAS_EN */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_RG_UART_BIAS_EN;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_RG_UART_TX_OE */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_RG_UART_TX_OE;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_RG_UART_EN */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp |= P2C_RG_UART_EN;
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> +	/* Set P2C_RG_USB20_DM_100K_EN */
> +	tmp = readl(u2_banks->com + U3P_U2PHYACR4);
> +	tmp |= P2C_RG_USB20_DM_100K_EN;
> +	writel(tmp, u2_banks->com + U3P_U2PHYACR4);
> +
> +	/* Clear P2C_RG_DMPULLDOWN, P2C_RG_DPPULLDOWN */
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +	tmp &= ~(P2C_RG_DPPULLDOWN | P2C_RG_DMPULLDOWN);
> +	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +}
> +
> +static int u2_phy_instance_get_mode_ext(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
> +{
> +	struct u2phy_banks *u2_banks = &instance->u2_banks;
> +	u32 tmp;
> +
> +	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +
> +	if ((tmp & P2C_RG_UART_MODE) >> P2C_RG_UART_MODE_OFET)
> +		return PHY_MODE_UART;
> +	else
> +		return PHY_MODE_USB_OTG;
> +}
> +
>  static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
>  				     struct mtk_phy_instance *instance,
>  				     enum phy_mode mode)
> @@ -609,6 +702,9 @@ static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
>  
>  	tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
>  	switch (mode) {
> +	case PHY_MODE_UART:
> +		u2_phy_instance_set_mode_2uart(u2_banks);
How do you use this helper?

Can we switch back to usb phy mode if switching to uart?
When switch to uart mode, if the host supports multi-ports, it will
cause the host can't enter sleep mode anymore.

> +		return;
>  	case PHY_MODE_USB_DEVICE:
>  		tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
>  		break;
> @@ -933,6 +1029,10 @@ static int mtk_phy_init(struct phy *phy)
>  		return ret;
>  	}
>  
> +	ret = u2_phy_instance_get_mode_ext(tphy, instance);
> +	if (ret == PHY_MODE_UART)
> +		return 0;
> +
>  	switch (instance->type) {
>  	case PHY_TYPE_USB2:
>  		u2_phy_instance_init(tphy, instance);
> @@ -996,6 +1096,19 @@ static int mtk_phy_exit(struct phy *phy)
>  	return 0;
>  }
>  
> +static int mtk_phy_get_mode_ext(struct phy *phy)
> +{
> +	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> +	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
> +	int ret;
> +
> +	ret = 0;
> +	if (instance->type == PHY_TYPE_USB2)
> +		ret = u2_phy_instance_get_mode_ext(tphy, instance);
> +
> +	return ret;
> +}
> +
>  static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
>  {
>  	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> @@ -1060,6 +1173,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
>  	.power_on	= mtk_phy_power_on,
>  	.power_off	= mtk_phy_power_off,
>  	.set_mode	= mtk_phy_set_mode,
> +	.get_mode_ext	= mtk_phy_get_mode_ext,
>  	.owner		= THIS_MODULE,
>  };
>
diff mbox series

Patch

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cdbcc49..a7dfeec 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -68,6 +68,7 @@ 
 #define PA6_RG_U2_SQTH_VAL(x)	(0xf & (x))
 
 #define U3P_U2PHYACR4		0x020
+#define P2C_RG_USB20_DM_100K_EN		BIT(17)
 #define P2C_RG_USB20_GPIO_CTL		BIT(9)
 #define P2C_USB20_GPIO_MODE		BIT(8)
 #define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
@@ -76,6 +77,12 @@ 
 #define P2C_RG_SIF_U2PLL_FORCE_ON	BIT(24)
 
 #define U3P_U2PHYDTM0		0x068
+#define P2C_RG_UART_MODE		GENMASK(31, 30)
+#define P2C_RG_UART_MODE_VAL(x)		((0x3 & (x)) << 30)
+#define P2C_RG_UART_MODE_OFET		(30)
+#define P2C_FORCE_UART_I		BIT(29)
+#define P2C_FORCE_UART_BIAS_EN		BIT(28)
+#define P2C_FORCE_UART_TX_OE		BIT(27)
 #define P2C_FORCE_UART_EN		BIT(26)
 #define P2C_FORCE_DATAIN		BIT(23)
 #define P2C_FORCE_DM_PULLDOWN		BIT(21)
@@ -98,6 +105,8 @@ 
 		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
 
 #define U3P_U2PHYDTM1		0x06C
+#define P2C_RG_UART_BIAS_EN		BIT(18)
+#define P2C_RG_UART_TX_OE		BIT(17)
 #define P2C_RG_UART_EN			BIT(16)
 #define P2C_FORCE_IDDIG		BIT(9)
 #define P2C_RG_VBUSVALID		BIT(5)
@@ -600,6 +609,90 @@  static void u2_phy_instance_exit(struct mtk_tphy *tphy,
 	}
 }
 
+static void u2_phy_instance_set_mode_2uart(struct u2phy_banks *u2_banks)
+{
+	u32 tmp;
+
+	/* Clear PA6_RG_U2_BC11_SW_EN */
+	tmp = readl(u2_banks->com + U3P_USBPHYACR6);
+	tmp &= ~(PA6_RG_U2_BC11_SW_EN);
+	writel(tmp, u2_banks->com + U3P_USBPHYACR6);
+
+	/* Set P2C_RG_SUSPENDM */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_RG_SUSPENDM;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_FORCE_SUSPENDM */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_FORCE_SUSPENDM;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Clear and Set P2C_RG_UART_MODE to 2'b01 */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp &= ~(P2C_RG_UART_MODE);
+	tmp |= P2C_RG_UART_MODE_VAL(0x1);
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Clear P2C_FORCE_UART_I */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp &= ~(P2C_FORCE_UART_I);
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_FORCE_UART_BIAS_EN */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_FORCE_UART_BIAS_EN;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_FORCE_UART_TX_OE */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_FORCE_UART_TX_OE;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_FORCE_UART_EN */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_FORCE_UART_EN;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_RG_UART_BIAS_EN */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_RG_UART_BIAS_EN;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_RG_UART_TX_OE */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_RG_UART_TX_OE;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_RG_UART_EN */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp |= P2C_RG_UART_EN;
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+	/* Set P2C_RG_USB20_DM_100K_EN */
+	tmp = readl(u2_banks->com + U3P_U2PHYACR4);
+	tmp |= P2C_RG_USB20_DM_100K_EN;
+	writel(tmp, u2_banks->com + U3P_U2PHYACR4);
+
+	/* Clear P2C_RG_DMPULLDOWN, P2C_RG_DPPULLDOWN */
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+	tmp &= ~(P2C_RG_DPPULLDOWN | P2C_RG_DMPULLDOWN);
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+}
+
+static int u2_phy_instance_get_mode_ext(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	u32 tmp;
+
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+
+	if ((tmp & P2C_RG_UART_MODE) >> P2C_RG_UART_MODE_OFET)
+		return PHY_MODE_UART;
+	else
+		return PHY_MODE_USB_OTG;
+}
+
 static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
 				     struct mtk_phy_instance *instance,
 				     enum phy_mode mode)
@@ -609,6 +702,9 @@  static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
 
 	tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
 	switch (mode) {
+	case PHY_MODE_UART:
+		u2_phy_instance_set_mode_2uart(u2_banks);
+		return;
 	case PHY_MODE_USB_DEVICE:
 		tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
 		break;
@@ -933,6 +1029,10 @@  static int mtk_phy_init(struct phy *phy)
 		return ret;
 	}
 
+	ret = u2_phy_instance_get_mode_ext(tphy, instance);
+	if (ret == PHY_MODE_UART)
+		return 0;
+
 	switch (instance->type) {
 	case PHY_TYPE_USB2:
 		u2_phy_instance_init(tphy, instance);
@@ -996,6 +1096,19 @@  static int mtk_phy_exit(struct phy *phy)
 	return 0;
 }
 
+static int mtk_phy_get_mode_ext(struct phy *phy)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	ret = 0;
+	if (instance->type == PHY_TYPE_USB2)
+		ret = u2_phy_instance_get_mode_ext(tphy, instance);
+
+	return ret;
+}
+
 static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 {
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -1060,6 +1173,7 @@  static struct phy *mtk_phy_xlate(struct device *dev,
 	.power_on	= mtk_phy_power_on,
 	.power_off	= mtk_phy_power_off,
 	.set_mode	= mtk_phy_set_mode,
+	.get_mode_ext	= mtk_phy_get_mode_ext,
 	.owner		= THIS_MODULE,
 };