deleted file mode 100644
@@ -1,82 +0,0 @@
-TI AM654 SERDES
-
-Required properties:
- - compatible: Should be "ti,phy-am654-serdes"
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
- phandle while referencing this phy. Should be "2". The 1st cell
- corresponds to the phy type (should be one of the types specified in
- include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
- lane function.
- If SERDES0 is referenced 2nd cell should be:
- 0 - USB3
- 1 - PCIe0 Lane0
- 2 - ICSS2 SGMII Lane0
- If SERDES1 is referenced 2nd cell should be:
- 0 - PCIe1 Lane0
- 1 - PCIe0 Lane1
- 2 - ICSS2 SGMII Lane1
- - power-domains: As documented by the generic PM domain bindings in
- Documentation/devicetree/bindings/power/power_domain.txt.
- - clocks: List of clock-specifiers representing the input to the SERDES.
- Should have 3 items representing the left input clock, external
- reference clock and right input clock in that order.
- - clock-output-names: List of clock names for each of the clock outputs of
- SERDES. Should have 3 items for CMU reference clock,
- left output clock and right output clock in that order.
- - assigned-clocks: As defined in
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- - assigned-clock-parents: As defined in
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- - #clock-cells: Should be <1> to choose between the 3 output clocks.
- Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
-
- The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
- for selecting the correct reference clock. This can be used while
- specifying the clocks created by SERDES.
- => AM654_SERDES_CMU_REFCLK
- => AM654_SERDES_LO_REFCLK
- => AM654_SERDES_RO_REFCLK
-
- - mux-controls: Phandle to the multiplexer that is used to select the lane
- function. See #phy-cells above to see the multiplex values.
-
-Example:
-
-Example for SERDES0 is given below. It has 3 clock inputs;
-left input reference clock as indicated by <&k3_clks 153 4>, external
-reference clock as indicated by <&k3_clks 153 1> and right input
-reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
-right input of SERDES0 is connected to the left output of SERDES1).
-
-SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
-first refers to the CMU reference clock, second refers to the left output
-reference clock and the third refers to the right output reference clock.
-
-The assigned-clocks and assigned-clock-parents is used here to set the
-parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
-CMU reference clock to left input reference clock.
-
-serdes0: serdes@900000 {
- compatible = "ti,phy-am654-serdes";
- reg = <0x0 0x900000 0x0 0x2000>;
- reg-names = "serdes";
- #phy-cells = <2>;
- power-domains = <&k3_pds 153>;
- clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
- <&serdes1 AM654_SERDES_LO_REFCLK>;
- clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
- "serdes0_ro_refclk";
- assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
- assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
- ti,serdes-clk = <&serdes0_clk>;
- mux-controls = <&serdes_mux 0>;
- #clock-cells = <1>;
-};
-
-Example for PCIe consumer node using the SERDES PHY specifier is given below.
-&pcie0_rc {
- num-lanes = <2>;
- phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
- phy-names = "pcie-phy0", "pcie-phy1";
-};
new file mode 100644
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM654 SERDES binding
+
+description:
+ This binding describes the TI AM654 SERDES. AM654 SERDES can be configured
+ to be used with either PCIe or USB or SGMII.
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,phy-am654-serdes
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: serdes
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description:
+ Three input clocks referring to left input reference clock, refclk and right input reference
+ clock.
+
+ assigned-clocks:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ assigned-clock-parents:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+ '#phy-cells':
+ const: 2
+ description:
+ The 1st cell corresponds to the phy type (should be one of the types specified in
+ include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes lane function.
+
+ ti,serdes-clk:
+ description: Phandle to the SYSCON entry required for configuring SERDES clock selection.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ '#clock-cells':
+ const: 1
+
+ mux-controls:
+ maxItems: 1
+ description: Phandle to the SYSCON entry required for configuring SERDES lane function.
+
+ clock-output-names:
+ oneOf:
+ - description: Clock output names for SERDES 0
+ items:
+ - const: serdes0_cmu_refclk
+ - const: serdes0_lo_refclk
+ - const: serdes0_ro_refclk
+ - description: Clock output names for SERDES 1
+ items:
+ - const: serdes1_cmu_refclk
+ - const: serdes1_lo_refclk
+ - const: serdes1_ro_refclk
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - assigned-clocks
+ - assigned-clock-parents
+ - ti,serdes-clk
+ - mux-controls
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy-am654-serdes.h>
+
+ serdes0: serdes@900000 {
+ compatible = "ti,phy-am654-serdes";
+ reg = <0x900000 0x2000>;
+ reg-names = "serdes";
+ #phy-cells = <2>;
+ power-domains = <&k3_pds 153>;
+ clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
+ <&serdes1 AM654_SERDES_LO_REFCLK>;
+ clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+ assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+ assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+ ti,serdes-clk = <&serdes0_clk>;
+ mux-controls = <&serdes_mux 0>;
+ #clock-cells = <1>;
+ };
Convert SERDES dt-bindings for TI's AM654 SoC to YAML binding. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- .../bindings/phy/ti,phy-am654-serdes.txt | 82 -------------- .../bindings/phy/ti,phy-am654-serdes.yaml | 103 ++++++++++++++++++ 2 files changed, 103 insertions(+), 82 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml