@@ -66,6 +66,47 @@
#define AR9331_SW_REG_GLOBAL_CTRL 0x30
#define AR9331_SW_GLOBAL_CTRL_MFS_M GENMASK(13, 0)
+/* Size of the address resolution table (ARL) */
+#define AR9331_SW_NUM_ARL_RECORDS 1024
+
+#define AR9331_SW_REG_ADDR_TABLE_FUNCTION0 0x50
+#define AR9331_SW_AT_ADDR_BYTES4 GENMASK(31, 24)
+#define AR9331_SW_AT_ADDR_BYTES5 GENMASK(23, 16)
+#define AR9331_SW_AT_FULL_VIO BIT(12)
+#define AR9331_SW_AT_PORT_NUM GENMASK(11, 8)
+#define AR9331_SW_AT_FLUSH_STATIC_EN BIT(4)
+#define AR9331_SW_AT_BUSY BIT(3)
+#define AR9331_SW_AT_FUNC GENMASK(2, 0)
+#define AR9331_SW_AT_FUNC_NOP 0
+#define AR9331_SW_AT_FUNC_FLUSH_ALL 1
+#define AR9331_SW_AT_FUNC_LOAD_ENTRY 2
+#define AR9331_SW_AT_FUNC_PURGE_ENTRY 3
+#define AR9331_SW_AT_FUNC_FLUSH_ALL_UNLOCKED 4
+#define AR9331_SW_AT_FUNC_FLUSH_PORT 5
+#define AR9331_SW_AT_FUNC_GET_NEXT 6
+#define AR9331_SW_AT_FUNC_FIND_MAC 7
+
+#define AR9331_SW_REG_ADDR_TABLE_FUNCTION1 0x54
+#define AR9331_SW_AT_ADDR_BYTES0 GENMASK(31, 24)
+#define AR9331_SW_AT_ADDR_BYTES1 GENMASK(23, 16)
+#define AR9331_SW_AT_ADDR_BYTES2 GENMASK(15, 8)
+#define AR9331_SW_AT_ADDR_BYTES3 GENMASK(7, 0)
+
+#define AR9331_SW_REG_ADDR_TABLE_FUNCTION2 0x58
+#define AR9331_SW_AT_COPY_TO_CPU BIT(26)
+#define AR9331_SW_AT_REDIRECT_TOCPU BIT(25)
+#define AR9331_SW_AT_LEAKY_EN BIT(24)
+#define AR9331_SW_AT_STATUS GENMASK(19, 16)
+#define AR9331_SW_AT_STATUS_EMPTY 0
+/* STATUS values from 7 to 1 are different aging levels */
+#define AR9331_SW_AT_STATUS_STATIC 0xf
+
+#define AR9331_SW_AT_SA_DROP_EN BIT(14)
+#define AR9331_SW_AT_MIRROR_EN BIT(13)
+#define AR9331_SW_AT_PRIORITY_EN BIT(12)
+#define AR9331_SW_AT_PRIORITY GENMASK(11, 10)
+#define AR9331_SW_AT_DES_PORT GENMASK(5, 0)
+
#define AR9331_SW_REG_ADDR_TABLE_CTRL 0x5c
#define AR9331_SW_AT_ARP_EN BIT(20)
#define AR9331_SW_AT_LEARN_CHANGE_EN BIT(18)
@@ -267,6 +308,12 @@ struct ar9331_sw_port {
struct spinlock stats_lock;
};
+struct ar9331_sw_fdb {
+ u8 port_mask;
+ u8 aging;
+ u8 mac[ETH_ALEN];
+};
+
struct ar9331_sw_priv {
struct device *dev;
struct dsa_switch ds;
@@ -731,6 +778,302 @@ static void ar9331_get_stats64(struct dsa_switch *ds, int port,
spin_unlock(&p->stats_lock);
}
+static int ar9331_sw_fdb_wait(struct ar9331_sw_priv *priv, u32 *f0)
+{
+ struct regmap *regmap = priv->regmap;
+
+ return regmap_read_poll_timeout(regmap,
+ AR9331_SW_REG_ADDR_TABLE_FUNCTION0,
+ *f0, !(*f0 & AR9331_SW_AT_BUSY),
+ 10, 2000);
+}
+
+static int ar9331_sw_port_fdb_write(struct ar9331_sw_priv *priv,
+ u32 f0, u32 f1, u32 f2)
+{
+ struct regmap *regmap = priv->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION2, f2);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION1, f1);
+ if (ret)
+ return ret;
+
+ return regmap_write(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION0, f0);
+}
+
+static int ar9331_sw_fdb_next(struct ar9331_sw_priv *priv,
+ struct ar9331_sw_fdb *fdb, int port)
+{
+ struct regmap *regmap = priv->regmap;
+ unsigned int status, ports;
+ u32 f0, f1, f2;
+ int ret;
+
+ /* Keep AT_ADDR_BYTES4/5 to search next entry after current */
+ ret = regmap_update_bits(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION0,
+ AR9331_SW_AT_FUNC | AR9331_SW_AT_BUSY,
+ AR9331_SW_AT_BUSY |
+ FIELD_PREP(AR9331_SW_AT_FUNC,
+ AR9331_SW_AT_FUNC_GET_NEXT));
+ if (ret)
+ return ret;
+
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION2, &f2);
+ if (ret)
+ return ret;
+
+ /* If the hardware returns an MAC != 0 and the AT_STATUS is zero, there
+ * is no next valid entry in the address table.
+ */
+ status = FIELD_GET(AR9331_SW_AT_STATUS, f2);
+ fdb->aging = status;
+ if (!status)
+ return 0;
+
+ ret = regmap_read(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION1, &f1);
+ if (ret)
+ return ret;
+
+ fdb->mac[0] = FIELD_GET(AR9331_SW_AT_ADDR_BYTES0, f1);
+ fdb->mac[1] = FIELD_GET(AR9331_SW_AT_ADDR_BYTES1, f1);
+ fdb->mac[2] = FIELD_GET(AR9331_SW_AT_ADDR_BYTES2, f1);
+ fdb->mac[3] = FIELD_GET(AR9331_SW_AT_ADDR_BYTES3, f1);
+ fdb->mac[4] = FIELD_GET(AR9331_SW_AT_ADDR_BYTES4, f0);
+ fdb->mac[5] = FIELD_GET(AR9331_SW_AT_ADDR_BYTES5, f0);
+
+ ports = FIELD_GET(AR9331_SW_AT_DES_PORT, f2);
+ if (!(ports & BIT(port)))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static void ar9331_sw_port_fdb_prepare(const unsigned char *mac, u32 *f0,
+ u32 *f1, unsigned int func)
+{
+ *f1 = FIELD_PREP(AR9331_SW_AT_ADDR_BYTES0, mac[0]) |
+ FIELD_PREP(AR9331_SW_AT_ADDR_BYTES1, mac[1]) |
+ FIELD_PREP(AR9331_SW_AT_ADDR_BYTES2, mac[2]) |
+ FIELD_PREP(AR9331_SW_AT_ADDR_BYTES3, mac[3]);
+ *f0 = FIELD_PREP(AR9331_SW_AT_ADDR_BYTES4, mac[4]) |
+ FIELD_PREP(AR9331_SW_AT_ADDR_BYTES5, mac[5]) |
+ FIELD_PREP(AR9331_SW_AT_FUNC, func) | AR9331_SW_AT_BUSY;
+}
+
+static int ar9331_sw_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ int cnt = AR9331_SW_NUM_ARL_RECORDS;
+ struct ar9331_sw_fdb fdb = { 0 };
+ bool is_static;
+ int ret;
+ u32 f0;
+
+ /* Make sure no pending operation is in progress. Since no timeout and
+ * interval values are documented, we use here "seems to be sane, works
+ * for me" values.
+ */
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ return ret;
+
+ /* If the address and the AT_STATUS are both zero, the hardware will
+ * search the first valid entry from entry0.
+ * If the address is set to zero and the AT_STATUS is not zero, the
+ * hardware will discover the next valid entry which has an address
+ * of 0x0.
+ */
+ ret = ar9331_sw_port_fdb_write(priv, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ while (cnt--) {
+ ret = ar9331_sw_fdb_next(priv, &fdb, port);
+ if (ret == -EAGAIN)
+ continue;
+ else if (ret)
+ return ret;
+
+ if (!fdb.aging)
+ break;
+
+ is_static = (fdb.aging == AR9331_SW_AT_STATUS_STATIC);
+ ret = cb(fdb.mac, 0, is_static, data);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int ar9331_sw_port_fdb_rmw(struct ar9331_sw_priv *priv,
+ const unsigned char *mac,
+ u8 port_mask_set,
+ u8 port_mask_clr)
+{
+ u8 port_mask, port_mask_new, status, func;
+ struct regmap *regmap = priv->regmap;
+ u32 f0, f1, f2 = 0;
+ int ret;
+
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ return ret;
+
+ ar9331_sw_port_fdb_prepare(mac, &f0, &f1, AR9331_SW_AT_FUNC_FIND_MAC);
+
+ ret = ar9331_sw_port_fdb_write(priv, f0, f1, f2);
+ if (ret)
+ return ret;
+
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION2, &f2);
+ if (ret)
+ return ret;
+
+ port_mask = FIELD_GET(AR9331_SW_AT_DES_PORT, f2);
+ status = FIELD_GET(AR9331_SW_AT_STATUS, f2);
+ if (status > 0 && status < AR9331_SW_AT_STATUS_STATIC) {
+ dev_dbg(priv->dev, "%s: found existing dynamic entry on %x\n",
+ __func__, port_mask);
+
+ if (port_mask_set && port_mask_set != port_mask)
+ dev_dbg(priv->dev, "%s: found existing dynamic entry on %x, replacing it with static on %x\n",
+ __func__, port_mask, port_mask_set);
+ port_mask = 0;
+ } else if (!status && !port_mask_set) {
+ return 0;
+ }
+
+ port_mask_new = port_mask & ~port_mask_clr;
+ port_mask_new |= port_mask_set;
+
+ if (port_mask_new == port_mask &&
+ status == AR9331_SW_AT_STATUS_STATIC) {
+ dev_dbg(priv->dev, "%s: no need to overwrite existing valid entry on %x\n",
+ __func__, port_mask_new);
+ return 0;
+ }
+
+ if (port_mask_new) {
+ func = AR9331_SW_AT_FUNC_LOAD_ENTRY;
+ } else {
+ func = AR9331_SW_AT_FUNC_PURGE_ENTRY;
+ port_mask_new = port_mask;
+ }
+
+ f2 = FIELD_PREP(AR9331_SW_AT_DES_PORT, port_mask_new) |
+ FIELD_PREP(AR9331_SW_AT_STATUS, AR9331_SW_AT_STATUS_STATIC);
+
+ ar9331_sw_port_fdb_prepare(mac, &f0, &f1, func);
+
+ ret = ar9331_sw_port_fdb_write(priv, f0, f1, f2);
+ if (ret)
+ return ret;
+
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ return ret;
+
+ if (f0 & AR9331_SW_AT_FULL_VIO) {
+ /* cleanup error status */
+ regmap_write(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION0, 0);
+ dev_err(priv->dev, "%s: can't add new entry, ATU is full\n", __func__);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int ar9331_sw_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *mac, u16 vid)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (vid)
+ return -EINVAL;
+
+ return ar9331_sw_port_fdb_rmw(priv, mac, port_mask, 0);
+}
+
+static int ar9331_sw_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *mac, u16 vid)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (vid)
+ return -EINVAL;
+
+ return ar9331_sw_port_fdb_rmw(priv, mac, 0, port_mask);
+}
+
+static int ar9331_sw_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (mdb->vid)
+ return -EOPNOTSUPP;
+
+ return ar9331_sw_port_fdb_rmw(priv, mdb->addr, port_mask, 0);
+}
+
+static int ar9331_sw_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (mdb->vid)
+ return -EOPNOTSUPP;
+
+ return ar9331_sw_port_fdb_rmw(priv, mdb->addr, 0, port_mask);
+}
+
+static void ar9331_sw_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret;
+ u32 f0;
+
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ goto error;
+
+ /* Flush all non static unicast address on a given port */
+ f0 = FIELD_PREP(AR9331_SW_AT_PORT_NUM, port) |
+ FIELD_PREP(AR9331_SW_AT_FUNC, AR9331_SW_AT_FUNC_FLUSH_PORT) |
+ AR9331_SW_AT_BUSY;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_ADDR_TABLE_FUNCTION0, f0);
+ if (ret)
+ goto error;
+
+ ret = ar9331_sw_fdb_wait(priv, &f0);
+ if (ret)
+ goto error;
+
+ return;
+error:
+ dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+}
+
static const struct dsa_switch_ops ar9331_sw_ops = {
.get_tag_protocol = ar9331_sw_get_tag_protocol,
.setup = ar9331_sw_setup,
@@ -740,6 +1083,12 @@ static const struct dsa_switch_ops ar9331_sw_ops = {
.phylink_mac_link_down = ar9331_sw_phylink_mac_link_down,
.phylink_mac_link_up = ar9331_sw_phylink_mac_link_up,
.get_stats64 = ar9331_get_stats64,
+ .port_fast_age = ar9331_sw_port_fast_age,
+ .port_fdb_del = ar9331_sw_port_fdb_del,
+ .port_fdb_add = ar9331_sw_port_fdb_add,
+ .port_fdb_dump = ar9331_sw_port_fdb_dump,
+ .port_mdb_add = ar9331_sw_port_mdb_add,
+ .port_mdb_del = ar9331_sw_port_mdb_del,
};
static irqreturn_t ar9331_sw_irq(int irq, void *data)
This switch provides simple address resolution table, without VLAN or multicast specific information. With this patch we are able now to read, modify unicast and multicast addresses. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/dsa/qca/ar9331.c | 349 +++++++++++++++++++++++++++++++++++ 1 file changed, 349 insertions(+)