diff mbox series

ASoC: codecs: wcd938x: add Multi Button Headset Control support

Message ID 20210716105918.7301-1-srinivas.kandagatla@linaro.org (mailing list archive)
State Accepted
Commit bcee7ed09b8e70b65d5c04f5d1acd2cf4213c2f3
Headers show
Series ASoC: codecs: wcd938x: add Multi Button Headset Control support | expand

Commit Message

Srinivas Kandagatla July 16, 2021, 10:59 a.m. UTC
WCD938x has Multi Button Headset Control hardware to support Headset
insertion, type detection, 8 headset buttons detection, Over Current
detection and Impedence measurements.
This patch adds support for this using wcd-mbhc apis.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/codecs/Kconfig   |   1 +
 sound/soc/codecs/wcd938x.c | 841 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 819 insertions(+), 23 deletions(-)

Comments

Mark Brown Aug. 6, 2021, 12:47 a.m. UTC | #1
On Fri, 16 Jul 2021 11:59:18 +0100, Srinivas Kandagatla wrote:
> WCD938x has Multi Button Headset Control hardware to support Headset
> insertion, type detection, 8 headset buttons detection, Over Current
> detection and Impedence measurements.
> This patch adds support for this using wcd-mbhc apis.
> 
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: codecs: wcd938x: add Multi Button Headset Control support
      commit: bcee7ed09b8e70b65d5c04f5d1acd2cf4213c2f3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 6d4c65d6fadd..57437eef1125 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1563,6 +1563,7 @@  config SND_SOC_WCD938X
 config SND_SOC_WCD938X_SDW
 	tristate "WCD9380/WCD9385 Codec - SDW"
 	select SND_SOC_WCD938X
+	select SND_SOC_WCD_MBHC
 	depends on SOUNDWIRE
 	select REGMAP_SOUNDWIRE
 	help
diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
index e5795cd964f7..90e072a78ebf 100644
--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -21,6 +21,7 @@ 
 #include <linux/regulator/consumer.h>
 
 #include "wcd-clsh-v2.h"
+#include "wcd-mbhc-v2.h"
 #include "wcd938x.h"
 
 #define WCD938X_MAX_MICBIAS		(4)
@@ -173,6 +174,11 @@  struct wcd938x_priv {
 	struct device *rxdev;
 	struct device_node *rxnode, *txnode;
 	struct regmap *regmap;
+	struct mutex micb_lock;
+	/* mbhc module */
+	struct wcd_mbhc *wcd_mbhc;
+	struct wcd_mbhc_config mbhc_cfg;
+	struct wcd_mbhc_intr intr_ids;
 	struct wcd_clsh_ctrl *clsh_info;
 	struct irq_domain *virq;
 	struct regmap_irq_chip *wcd_regmap_irq_chip;
@@ -201,24 +207,70 @@  struct wcd938x_priv {
 	bool bcs_dis;
 };
 
-enum {
-	MIC_BIAS_1 = 1,
-	MIC_BIAS_2,
-	MIC_BIAS_3,
-	MIC_BIAS_4
-};
-
-enum {
-	MICB_PULLUP_ENABLE,
-	MICB_PULLUP_DISABLE,
-	MICB_ENABLE,
-	MICB_DISABLE,
-};
-
 static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(ear_pa_gain, 600, -1800);
 static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(line_gain, 600, -3000);
 static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(analog_gain, 0, 3000);
 
+struct wcd938x_mbhc_zdet_param {
+	u16 ldo_ctl;
+	u16 noff;
+	u16 nshift;
+	u16 btn5;
+	u16 btn6;
+	u16 btn7;
+};
+
+static struct wcd_mbhc_field wcd_mbhc_fields[WCD_MBHC_REG_FUNC_MAX] = {
+	WCD_MBHC_FIELD(WCD_MBHC_L_DET_EN, WCD938X_ANA_MBHC_MECH, 0x80),
+	WCD_MBHC_FIELD(WCD_MBHC_GND_DET_EN, WCD938X_ANA_MBHC_MECH, 0x40),
+	WCD_MBHC_FIELD(WCD_MBHC_MECH_DETECTION_TYPE, WCD938X_ANA_MBHC_MECH, 0x20),
+	WCD_MBHC_FIELD(WCD_MBHC_MIC_CLAMP_CTL, WCD938X_MBHC_NEW_PLUG_DETECT_CTL, 0x30),
+	WCD_MBHC_FIELD(WCD_MBHC_ELECT_DETECTION_TYPE, WCD938X_ANA_MBHC_ELECT, 0x08),
+	WCD_MBHC_FIELD(WCD_MBHC_HS_L_DET_PULL_UP_CTRL, WCD938X_MBHC_NEW_INT_MECH_DET_CURRENT, 0x1F),
+	WCD_MBHC_FIELD(WCD_MBHC_HS_L_DET_PULL_UP_COMP_CTRL, WCD938X_ANA_MBHC_MECH, 0x04),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHL_PLUG_TYPE, WCD938X_ANA_MBHC_MECH, 0x10),
+	WCD_MBHC_FIELD(WCD_MBHC_GND_PLUG_TYPE, WCD938X_ANA_MBHC_MECH, 0x08),
+	WCD_MBHC_FIELD(WCD_MBHC_SW_HPH_LP_100K_TO_GND, WCD938X_ANA_MBHC_MECH, 0x01),
+	WCD_MBHC_FIELD(WCD_MBHC_ELECT_SCHMT_ISRC, WCD938X_ANA_MBHC_ELECT, 0x06),
+	WCD_MBHC_FIELD(WCD_MBHC_FSM_EN, WCD938X_ANA_MBHC_ELECT, 0x80),
+	WCD_MBHC_FIELD(WCD_MBHC_INSREM_DBNC, WCD938X_MBHC_NEW_PLUG_DETECT_CTL, 0x0F),
+	WCD_MBHC_FIELD(WCD_MBHC_BTN_DBNC, WCD938X_MBHC_NEW_CTL_1, 0x03),
+	WCD_MBHC_FIELD(WCD_MBHC_HS_VREF, WCD938X_MBHC_NEW_CTL_2, 0x03),
+	WCD_MBHC_FIELD(WCD_MBHC_HS_COMP_RESULT, WCD938X_ANA_MBHC_RESULT_3, 0x08),
+	WCD_MBHC_FIELD(WCD_MBHC_IN2P_CLAMP_STATE, WCD938X_ANA_MBHC_RESULT_3, 0x10),
+	WCD_MBHC_FIELD(WCD_MBHC_MIC_SCHMT_RESULT, WCD938X_ANA_MBHC_RESULT_3, 0x20),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHL_SCHMT_RESULT, WCD938X_ANA_MBHC_RESULT_3, 0x80),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHR_SCHMT_RESULT, WCD938X_ANA_MBHC_RESULT_3, 0x40),
+	WCD_MBHC_FIELD(WCD_MBHC_OCP_FSM_EN, WCD938X_HPH_OCP_CTL, 0x10),
+	WCD_MBHC_FIELD(WCD_MBHC_BTN_RESULT, WCD938X_ANA_MBHC_RESULT_3, 0x07),
+	WCD_MBHC_FIELD(WCD_MBHC_BTN_ISRC_CTL, WCD938X_ANA_MBHC_ELECT, 0x70),
+	WCD_MBHC_FIELD(WCD_MBHC_ELECT_RESULT, WCD938X_ANA_MBHC_RESULT_3, 0xFF),
+	WCD_MBHC_FIELD(WCD_MBHC_MICB_CTRL, WCD938X_ANA_MICB2, 0xC0),
+	WCD_MBHC_FIELD(WCD_MBHC_HPH_CNP_WG_TIME, WCD938X_HPH_CNP_WG_TIME, 0xFF),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHR_PA_EN, WCD938X_ANA_HPH, 0x40),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHL_PA_EN, WCD938X_ANA_HPH, 0x80),
+	WCD_MBHC_FIELD(WCD_MBHC_HPH_PA_EN, WCD938X_ANA_HPH, 0xC0),
+	WCD_MBHC_FIELD(WCD_MBHC_SWCH_LEVEL_REMOVE, WCD938X_ANA_MBHC_RESULT_3, 0x10),
+	WCD_MBHC_FIELD(WCD_MBHC_ANC_DET_EN, WCD938X_MBHC_CTL_BCS, 0x02),
+	WCD_MBHC_FIELD(WCD_MBHC_FSM_STATUS, WCD938X_MBHC_NEW_FSM_STATUS, 0x01),
+	WCD_MBHC_FIELD(WCD_MBHC_MUX_CTL, WCD938X_MBHC_NEW_CTL_2, 0x70),
+	WCD_MBHC_FIELD(WCD_MBHC_MOISTURE_STATUS, WCD938X_MBHC_NEW_FSM_STATUS, 0x20),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHR_GND, WCD938X_HPH_PA_CTL2, 0x40),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHL_GND, WCD938X_HPH_PA_CTL2, 0x10),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHL_OCP_DET_EN, WCD938X_HPH_L_TEST, 0x01),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHR_OCP_DET_EN, WCD938X_HPH_R_TEST, 0x01),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHL_OCP_STATUS, WCD938X_DIGITAL_INTR_STATUS_0, 0x80),
+	WCD_MBHC_FIELD(WCD_MBHC_HPHR_OCP_STATUS, WCD938X_DIGITAL_INTR_STATUS_0, 0x20),
+	WCD_MBHC_FIELD(WCD_MBHC_ADC_EN, WCD938X_MBHC_NEW_CTL_1, 0x08),
+	WCD_MBHC_FIELD(WCD_MBHC_ADC_COMPLETE, WCD938X_MBHC_NEW_FSM_STATUS, 0x40),
+	WCD_MBHC_FIELD(WCD_MBHC_ADC_TIMEOUT, WCD938X_MBHC_NEW_FSM_STATUS, 0x80),
+	WCD_MBHC_FIELD(WCD_MBHC_ADC_RESULT, WCD938X_MBHC_NEW_ADC_RESULT, 0xFF),
+	WCD_MBHC_FIELD(WCD_MBHC_MICB2_VOUT, WCD938X_ANA_MICB2, 0x3F),
+	WCD_MBHC_FIELD(WCD_MBHC_ADC_MODE, WCD938X_MBHC_NEW_CTL_1, 0x10),
+	WCD_MBHC_FIELD(WCD_MBHC_DETECTION_DONE, WCD938X_MBHC_NEW_CTL_1, 0x04),
+	WCD_MBHC_FIELD(WCD_MBHC_ELECT_ISRC_EN, WCD938X_ANA_MBHC_ZDET, 0x02),
+};
+
 static const struct reg_default wcd938x_defaults[] = {
 	{WCD938X_ANA_PAGE_REGISTER,                            0x00},
 	{WCD938X_ANA_BIAS,                                     0x00},
@@ -1725,6 +1777,8 @@  static int wcd938x_codec_enable_hphr_pa(struct snd_soc_dapm_widget *w,
 			usleep_range(7000, 7100);
 		snd_soc_component_write_field(component, WCD938X_ANA_HPH,
 					      WCD938X_HPHR_EN_MASK, 0);
+		wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+					     WCD_EVENT_PRE_HPHR_PA_OFF);
 		set_bit(HPH_PA_DELAY, &wcd938x->status_mask);
 		break;
 	case SND_SOC_DAPM_POST_PMD:
@@ -1740,6 +1794,8 @@  static int wcd938x_codec_enable_hphr_pa(struct snd_soc_dapm_widget *w,
 				usleep_range(7000, 7100);
 			clear_bit(HPH_PA_DELAY, &wcd938x->status_mask);
 		}
+		wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+					     WCD_EVENT_POST_HPHR_PA_OFF);
 		snd_soc_component_write_field(component, WCD938X_ANA_HPH,
 					      WCD938X_HPHR_REF_EN_MASK, 0);
 		snd_soc_component_write_field(component, WCD938X_DIGITAL_PDM_WD_CTL1,
@@ -1827,6 +1883,7 @@  static int wcd938x_codec_enable_hphl_pa(struct snd_soc_dapm_widget *w,
 			usleep_range(7000, 7100);
 		snd_soc_component_write_field(component, WCD938X_ANA_HPH,
 					      WCD938X_HPHL_EN_MASK, 0);
+		wcd_mbhc_event_notify(wcd938x->wcd_mbhc, WCD_EVENT_PRE_HPHL_PA_OFF);
 		set_bit(HPH_PA_DELAY, &wcd938x->status_mask);
 		break;
 	case SND_SOC_DAPM_POST_PMD:
@@ -1842,6 +1899,8 @@  static int wcd938x_codec_enable_hphl_pa(struct snd_soc_dapm_widget *w,
 				usleep_range(7000, 7100);
 			clear_bit(HPH_PA_DELAY, &wcd938x->status_mask);
 		}
+		wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+					     WCD_EVENT_POST_HPHL_PA_OFF);
 		snd_soc_component_write_field(component, WCD938X_ANA_HPH,
 					      WCD938X_HPHL_REF_EN_MASK, 0);
 		snd_soc_component_write_field(component, WCD938X_DIGITAL_PDM_WD_CTL0,
@@ -2352,7 +2411,14 @@  static int wcd938x_micbias_control(struct snd_soc_component *component,
 			snd_soc_component_write_field(component, micb_reg,
 						      WCD938X_MICB_EN_MASK,
 						      WCD938X_MICB_ENABLE);
+			if (micb_num  == MIC_BIAS_2)
+				wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+						      WCD_EVENT_POST_MICBIAS_2_ON);
 		}
+		if (micb_num  == MIC_BIAS_2 && is_dapm)
+			wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+					      WCD_EVENT_POST_DAPM_MICBIAS_2_ON);
+
 
 		break;
 	case MICB_DISABLE:
@@ -2366,10 +2432,19 @@  static int wcd938x_micbias_control(struct snd_soc_component *component,
 						      WCD938X_MICB_PULL_UP);
 		else if ((wcd938x->micb_ref[micb_index] == 0) &&
 			 (wcd938x->pullup_ref[micb_index] == 0)) {
+			if (micb_num  == MIC_BIAS_2)
+				wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+						      WCD_EVENT_PRE_MICBIAS_2_OFF);
 
 			snd_soc_component_write_field(component, micb_reg,
 						      WCD938X_MICB_EN_MASK, 0);
+			if (micb_num  == MIC_BIAS_2)
+				wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+						      WCD_EVENT_POST_MICBIAS_2_OFF);
 		}
+		if (is_dapm && micb_num  == MIC_BIAS_2)
+			wcd_mbhc_event_notify(wcd938x->wcd_mbhc,
+					      WCD_EVENT_POST_DAPM_MICBIAS_2_OFF);
 		break;
 	}
 
@@ -2842,6 +2917,704 @@  static int wcd938x_set_swr_port(struct snd_kcontrol *kcontrol,
 
 }
 
+/* MBHC related */
+static void wcd938x_mbhc_clk_setup(struct snd_soc_component *component,
+				   bool enable)
+{
+	snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_1,
+				      WCD938X_MBHC_CTL_RCO_EN_MASK, enable);
+}
+
+static void wcd938x_mbhc_mbhc_bias_control(struct snd_soc_component *component,
+					   bool enable)
+{
+	snd_soc_component_write_field(component, WCD938X_ANA_MBHC_ELECT,
+				      WCD938X_ANA_MBHC_BIAS_EN, enable);
+}
+
+static void wcd938x_mbhc_program_btn_thr(struct snd_soc_component *component,
+					 int *btn_low, int *btn_high,
+					 int num_btn, bool is_micbias)
+{
+	int i, vth;
+
+	if (num_btn > WCD_MBHC_DEF_BUTTONS) {
+		dev_err(component->dev, "%s: invalid number of buttons: %d\n",
+			__func__, num_btn);
+		return;
+	}
+
+	for (i = 0; i < num_btn; i++) {
+		vth = ((btn_high[i] * 2) / 25) & 0x3F;
+		snd_soc_component_write_field(component, WCD938X_ANA_MBHC_BTN0 + i,
+					   WCD938X_MBHC_BTN_VTH_MASK, vth);
+		dev_dbg(component->dev, "%s: btn_high[%d]: %d, vth: %d\n",
+			__func__, i, btn_high[i], vth);
+	}
+}
+
+static bool wcd938x_mbhc_micb_en_status(struct snd_soc_component *component, int micb_num)
+{
+	u8 val;
+
+	if (micb_num == MIC_BIAS_2) {
+		val = snd_soc_component_read_field(component,
+						   WCD938X_ANA_MICB2,
+						   WCD938X_ANA_MICB2_ENABLE_MASK);
+		if (val == WCD938X_MICB_ENABLE)
+			return true;
+	}
+	return false;
+}
+
+static void wcd938x_mbhc_hph_l_pull_up_control(struct snd_soc_component *component,
+							int pull_up_cur)
+{
+	/* Default pull up current to 2uA */
+	if (pull_up_cur > HS_PULLUP_I_OFF || pull_up_cur < HS_PULLUP_I_3P0_UA)
+		pull_up_cur = HS_PULLUP_I_2P0_UA;
+
+	snd_soc_component_write_field(component,
+				      WCD938X_MBHC_NEW_INT_MECH_DET_CURRENT,
+				      WCD938X_HSDET_PULLUP_C_MASK, pull_up_cur);
+}
+
+static int wcd938x_mbhc_request_micbias(struct snd_soc_component *component,
+					int micb_num, int req)
+{
+	return wcd938x_micbias_control(component, micb_num, req, false);
+}
+
+static void wcd938x_mbhc_micb_ramp_control(struct snd_soc_component *component,
+					   bool enable)
+{
+	if (enable) {
+		snd_soc_component_write_field(component, WCD938X_ANA_MICB2_RAMP,
+				    WCD938X_RAMP_SHIFT_CTRL_MASK, 0x0C);
+		snd_soc_component_write_field(component, WCD938X_ANA_MICB2_RAMP,
+				    WCD938X_RAMP_EN_MASK, 1);
+	} else {
+		snd_soc_component_write_field(component, WCD938X_ANA_MICB2_RAMP,
+				    WCD938X_RAMP_EN_MASK, 0);
+		snd_soc_component_write_field(component, WCD938X_ANA_MICB2_RAMP,
+				    WCD938X_RAMP_SHIFT_CTRL_MASK, 0);
+	}
+}
+
+static int wcd938x_get_micb_vout_ctl_val(u32 micb_mv)
+{
+	/* min micbias voltage is 1V and maximum is 2.85V */
+	if (micb_mv < 1000 || micb_mv > 2850)
+		return -EINVAL;
+
+	return (micb_mv - 1000) / 50;
+}
+
+static int wcd938x_mbhc_micb_adjust_voltage(struct snd_soc_component *component,
+					    int req_volt, int micb_num)
+{
+	struct wcd938x_priv *wcd938x =  snd_soc_component_get_drvdata(component);
+	int cur_vout_ctl, req_vout_ctl, micb_reg, micb_en, ret = 0;
+
+	switch (micb_num) {
+	case MIC_BIAS_1:
+		micb_reg = WCD938X_ANA_MICB1;
+		break;
+	case MIC_BIAS_2:
+		micb_reg = WCD938X_ANA_MICB2;
+		break;
+	case MIC_BIAS_3:
+		micb_reg = WCD938X_ANA_MICB3;
+		break;
+	case MIC_BIAS_4:
+		micb_reg = WCD938X_ANA_MICB4;
+		break;
+	default:
+		return -EINVAL;
+	}
+	mutex_lock(&wcd938x->micb_lock);
+	/*
+	 * If requested micbias voltage is same as current micbias
+	 * voltage, then just return. Otherwise, adjust voltage as
+	 * per requested value. If micbias is already enabled, then
+	 * to avoid slow micbias ramp-up or down enable pull-up
+	 * momentarily, change the micbias value and then re-enable
+	 * micbias.
+	 */
+	micb_en = snd_soc_component_read_field(component, micb_reg,
+						WCD938X_MICB_EN_MASK);
+	cur_vout_ctl = snd_soc_component_read_field(component, micb_reg,
+						    WCD938X_MICB_VOUT_MASK);
+
+	req_vout_ctl = wcd938x_get_micb_vout_ctl_val(req_volt);
+	if (req_vout_ctl < 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (cur_vout_ctl == req_vout_ctl) {
+		ret = 0;
+		goto exit;
+	}
+
+	if (micb_en == WCD938X_MICB_ENABLE)
+		snd_soc_component_write_field(component, micb_reg,
+					      WCD938X_MICB_EN_MASK,
+					      WCD938X_MICB_PULL_UP);
+
+	snd_soc_component_write_field(component, micb_reg,
+				      WCD938X_MICB_VOUT_MASK,
+				      req_vout_ctl);
+
+	if (micb_en == WCD938X_MICB_ENABLE) {
+		snd_soc_component_write_field(component, micb_reg,
+					      WCD938X_MICB_EN_MASK,
+					      WCD938X_MICB_ENABLE);
+		/*
+		 * Add 2ms delay as per HW requirement after enabling
+		 * micbias
+		 */
+		usleep_range(2000, 2100);
+	}
+exit:
+	mutex_unlock(&wcd938x->micb_lock);
+	return ret;
+}
+
+static int wcd938x_mbhc_micb_ctrl_threshold_mic(struct snd_soc_component *component,
+						int micb_num, bool req_en)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+	int rc, micb_mv;
+
+	if (micb_num != MIC_BIAS_2)
+		return -EINVAL;
+	/*
+	 * If device tree micbias level is already above the minimum
+	 * voltage needed to detect threshold microphone, then do
+	 * not change the micbias, just return.
+	 */
+	if (wcd938x->micb2_mv >= WCD_MBHC_THR_HS_MICB_MV)
+		return 0;
+
+	micb_mv = req_en ? WCD_MBHC_THR_HS_MICB_MV : wcd938x->micb2_mv;
+
+	rc = wcd938x_mbhc_micb_adjust_voltage(component, micb_mv, MIC_BIAS_2);
+
+	return rc;
+}
+
+static inline void wcd938x_mbhc_get_result_params(struct wcd938x_priv *wcd938x,
+						s16 *d1_a, u16 noff,
+						int32_t *zdet)
+{
+	int i;
+	int val, val1;
+	s16 c1;
+	s32 x1, d1;
+	int32_t denom;
+	int minCode_param[] = {
+			3277, 1639, 820, 410, 205, 103, 52, 26
+	};
+
+	regmap_update_bits(wcd938x->regmap, WCD938X_ANA_MBHC_ZDET, 0x20, 0x20);
+	for (i = 0; i < WCD938X_ZDET_NUM_MEASUREMENTS; i++) {
+		regmap_read(wcd938x->regmap, WCD938X_ANA_MBHC_RESULT_2, &val);
+		if (val & 0x80)
+			break;
+	}
+	val = val << 0x8;
+	regmap_read(wcd938x->regmap, WCD938X_ANA_MBHC_RESULT_1, &val1);
+	val |= val1;
+	regmap_update_bits(wcd938x->regmap, WCD938X_ANA_MBHC_ZDET, 0x20, 0x00);
+	x1 = WCD938X_MBHC_GET_X1(val);
+	c1 = WCD938X_MBHC_GET_C1(val);
+	/* If ramp is not complete, give additional 5ms */
+	if ((c1 < 2) && x1)
+		usleep_range(5000, 5050);
+
+	if (!c1 || !x1) {
+		pr_err("%s: Impedance detect ramp error, c1=%d, x1=0x%x\n",
+			__func__, c1, x1);
+		goto ramp_down;
+	}
+	d1 = d1_a[c1];
+	denom = (x1 * d1) - (1 << (14 - noff));
+	if (denom > 0)
+		*zdet = (WCD938X_MBHC_ZDET_CONST * 1000) / denom;
+	else if (x1 < minCode_param[noff])
+		*zdet = WCD938X_ZDET_FLOATING_IMPEDANCE;
+
+	pr_err("%s: d1=%d, c1=%d, x1=0x%x, z_val=%d(milliOhm)\n",
+		__func__, d1, c1, x1, *zdet);
+ramp_down:
+	i = 0;
+	while (x1) {
+		regmap_read(wcd938x->regmap,
+				 WCD938X_ANA_MBHC_RESULT_1, &val);
+		regmap_read(wcd938x->regmap,
+				 WCD938X_ANA_MBHC_RESULT_2, &val1);
+		val = val << 0x08;
+		val |= val1;
+		x1 = WCD938X_MBHC_GET_X1(val);
+		i++;
+		if (i == WCD938X_ZDET_NUM_MEASUREMENTS)
+			break;
+	}
+}
+
+static void wcd938x_mbhc_zdet_ramp(struct snd_soc_component *component,
+				 struct wcd938x_mbhc_zdet_param *zdet_param,
+				 int32_t *zl, int32_t *zr, s16 *d1_a)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+	int32_t zdet = 0;
+
+	snd_soc_component_write_field(component, WCD938X_MBHC_NEW_ZDET_ANA_CTL,
+				WCD938X_ZDET_MAXV_CTL_MASK, zdet_param->ldo_ctl);
+	snd_soc_component_update_bits(component, WCD938X_ANA_MBHC_BTN5,
+				    WCD938X_VTH_MASK, zdet_param->btn5);
+	snd_soc_component_update_bits(component, WCD938X_ANA_MBHC_BTN6,
+				      WCD938X_VTH_MASK, zdet_param->btn6);
+	snd_soc_component_update_bits(component, WCD938X_ANA_MBHC_BTN7,
+				     WCD938X_VTH_MASK, zdet_param->btn7);
+	snd_soc_component_write_field(component, WCD938X_MBHC_NEW_ZDET_ANA_CTL,
+				WCD938X_ZDET_RANGE_CTL_MASK, zdet_param->noff);
+	snd_soc_component_update_bits(component, WCD938X_MBHC_NEW_ZDET_RAMP_CTL,
+				0x0F, zdet_param->nshift);
+
+	if (!zl)
+		goto z_right;
+	/* Start impedance measurement for HPH_L */
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_ANA_MBHC_ZDET, 0x80, 0x80);
+	dev_dbg(component->dev, "%s: ramp for HPH_L, noff = %d\n",
+		__func__, zdet_param->noff);
+	wcd938x_mbhc_get_result_params(wcd938x, d1_a, zdet_param->noff, &zdet);
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_ANA_MBHC_ZDET, 0x80, 0x00);
+
+	*zl = zdet;
+
+z_right:
+	if (!zr)
+		return;
+	/* Start impedance measurement for HPH_R */
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_ANA_MBHC_ZDET, 0x40, 0x40);
+	dev_dbg(component->dev, "%s: ramp for HPH_R, noff = %d\n",
+		__func__, zdet_param->noff);
+	wcd938x_mbhc_get_result_params(wcd938x, d1_a, zdet_param->noff, &zdet);
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_ANA_MBHC_ZDET, 0x40, 0x00);
+
+	*zr = zdet;
+}
+
+static inline void wcd938x_wcd_mbhc_qfuse_cal(struct snd_soc_component *component,
+					      int32_t *z_val, int flag_l_r)
+{
+	s16 q1;
+	int q1_cal;
+
+	if (*z_val < (WCD938X_ZDET_VAL_400/1000))
+		q1 = snd_soc_component_read(component,
+			WCD938X_DIGITAL_EFUSE_REG_23 + (2 * flag_l_r));
+	else
+		q1 = snd_soc_component_read(component,
+			WCD938X_DIGITAL_EFUSE_REG_24 + (2 * flag_l_r));
+	if (q1 & 0x80)
+		q1_cal = (10000 - ((q1 & 0x7F) * 25));
+	else
+		q1_cal = (10000 + (q1 * 25));
+	if (q1_cal > 0)
+		*z_val = ((*z_val) * 10000) / q1_cal;
+}
+
+static void wcd938x_wcd_mbhc_calc_impedance(struct snd_soc_component *component,
+					    uint32_t *zl, uint32_t *zr)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+	s16 reg0, reg1, reg2, reg3, reg4;
+	int32_t z1L, z1R, z1Ls;
+	int zMono, z_diff1, z_diff2;
+	bool is_fsm_disable = false;
+	struct wcd938x_mbhc_zdet_param zdet_param[] = {
+		{4, 0, 4, 0x08, 0x14, 0x18}, /* < 32ohm */
+		{2, 0, 3, 0x18, 0x7C, 0x90}, /* 32ohm < Z < 400ohm */
+		{1, 4, 5, 0x18, 0x7C, 0x90}, /* 400ohm < Z < 1200ohm */
+		{1, 6, 7, 0x18, 0x7C, 0x90}, /* >1200ohm */
+	};
+	struct wcd938x_mbhc_zdet_param *zdet_param_ptr = NULL;
+	s16 d1_a[][4] = {
+		{0, 30, 90, 30},
+		{0, 30, 30, 5},
+		{0, 30, 30, 5},
+		{0, 30, 30, 5},
+	};
+	s16 *d1 = NULL;
+
+	reg0 = snd_soc_component_read(component, WCD938X_ANA_MBHC_BTN5);
+	reg1 = snd_soc_component_read(component, WCD938X_ANA_MBHC_BTN6);
+	reg2 = snd_soc_component_read(component, WCD938X_ANA_MBHC_BTN7);
+	reg3 = snd_soc_component_read(component, WCD938X_MBHC_CTL_CLK);
+	reg4 = snd_soc_component_read(component, WCD938X_MBHC_NEW_ZDET_ANA_CTL);
+
+	if (snd_soc_component_read(component, WCD938X_ANA_MBHC_ELECT) & 0x80) {
+		is_fsm_disable = true;
+		regmap_update_bits(wcd938x->regmap,
+				   WCD938X_ANA_MBHC_ELECT, 0x80, 0x00);
+	}
+
+	/* For NO-jack, disable L_DET_EN before Z-det measurements */
+	if (wcd938x->mbhc_cfg.hphl_swh)
+		regmap_update_bits(wcd938x->regmap,
+				   WCD938X_ANA_MBHC_MECH, 0x80, 0x00);
+
+	/* Turn off 100k pull down on HPHL */
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_ANA_MBHC_MECH, 0x01, 0x00);
+
+	/* Disable surge protection before impedance detection.
+	 * This is done to give correct value for high impedance.
+	 */
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_HPH_SURGE_HPHLR_SURGE_EN, 0xC0, 0x00);
+	/* 1ms delay needed after disable surge protection */
+	usleep_range(1000, 1010);
+
+	/* First get impedance on Left */
+	d1 = d1_a[1];
+	zdet_param_ptr = &zdet_param[1];
+	wcd938x_mbhc_zdet_ramp(component, zdet_param_ptr, &z1L, NULL, d1);
+
+	if (!WCD938X_MBHC_IS_SECOND_RAMP_REQUIRED(z1L))
+		goto left_ch_impedance;
+
+	/* Second ramp for left ch */
+	if (z1L < WCD938X_ZDET_VAL_32) {
+		zdet_param_ptr = &zdet_param[0];
+		d1 = d1_a[0];
+	} else if ((z1L > WCD938X_ZDET_VAL_400) &&
+		  (z1L <= WCD938X_ZDET_VAL_1200)) {
+		zdet_param_ptr = &zdet_param[2];
+		d1 = d1_a[2];
+	} else if (z1L > WCD938X_ZDET_VAL_1200) {
+		zdet_param_ptr = &zdet_param[3];
+		d1 = d1_a[3];
+	}
+	wcd938x_mbhc_zdet_ramp(component, zdet_param_ptr, &z1L, NULL, d1);
+
+left_ch_impedance:
+	if ((z1L == WCD938X_ZDET_FLOATING_IMPEDANCE) ||
+		(z1L > WCD938X_ZDET_VAL_100K)) {
+		*zl = WCD938X_ZDET_FLOATING_IMPEDANCE;
+		zdet_param_ptr = &zdet_param[1];
+		d1 = d1_a[1];
+	} else {
+		*zl = z1L/1000;
+		wcd938x_wcd_mbhc_qfuse_cal(component, zl, 0);
+	}
+	dev_dbg(component->dev, "%s: impedance on HPH_L = %d(ohms)\n",
+		__func__, *zl);
+
+	/* Start of right impedance ramp and calculation */
+	wcd938x_mbhc_zdet_ramp(component, zdet_param_ptr, NULL, &z1R, d1);
+	if (WCD938X_MBHC_IS_SECOND_RAMP_REQUIRED(z1R)) {
+		if (((z1R > WCD938X_ZDET_VAL_1200) &&
+			(zdet_param_ptr->noff == 0x6)) ||
+			((*zl) != WCD938X_ZDET_FLOATING_IMPEDANCE))
+			goto right_ch_impedance;
+		/* Second ramp for right ch */
+		if (z1R < WCD938X_ZDET_VAL_32) {
+			zdet_param_ptr = &zdet_param[0];
+			d1 = d1_a[0];
+		} else if ((z1R > WCD938X_ZDET_VAL_400) &&
+			(z1R <= WCD938X_ZDET_VAL_1200)) {
+			zdet_param_ptr = &zdet_param[2];
+			d1 = d1_a[2];
+		} else if (z1R > WCD938X_ZDET_VAL_1200) {
+			zdet_param_ptr = &zdet_param[3];
+			d1 = d1_a[3];
+		}
+		wcd938x_mbhc_zdet_ramp(component, zdet_param_ptr, NULL, &z1R, d1);
+	}
+right_ch_impedance:
+	if ((z1R == WCD938X_ZDET_FLOATING_IMPEDANCE) ||
+		(z1R > WCD938X_ZDET_VAL_100K)) {
+		*zr = WCD938X_ZDET_FLOATING_IMPEDANCE;
+	} else {
+		*zr = z1R/1000;
+		wcd938x_wcd_mbhc_qfuse_cal(component, zr, 1);
+	}
+	dev_dbg(component->dev, "%s: impedance on HPH_R = %d(ohms)\n",
+		__func__, *zr);
+
+	/* Mono/stereo detection */
+	if ((*zl == WCD938X_ZDET_FLOATING_IMPEDANCE) &&
+		(*zr == WCD938X_ZDET_FLOATING_IMPEDANCE)) {
+		dev_dbg(component->dev,
+			"%s: plug type is invalid or extension cable\n",
+			__func__);
+		goto zdet_complete;
+	}
+	if ((*zl == WCD938X_ZDET_FLOATING_IMPEDANCE) ||
+	    (*zr == WCD938X_ZDET_FLOATING_IMPEDANCE) ||
+	    ((*zl < WCD_MONO_HS_MIN_THR) && (*zr > WCD_MONO_HS_MIN_THR)) ||
+	    ((*zl > WCD_MONO_HS_MIN_THR) && (*zr < WCD_MONO_HS_MIN_THR))) {
+		dev_dbg(component->dev,
+			"%s: Mono plug type with one ch floating or shorted to GND\n",
+			__func__);
+		wcd_mbhc_set_hph_type(wcd938x->wcd_mbhc, WCD_MBHC_HPH_MONO);
+		goto zdet_complete;
+	}
+	snd_soc_component_write_field(component, WCD938X_HPH_R_ATEST,
+				      WCD938X_HPHPA_GND_OVR_MASK, 1);
+	snd_soc_component_write_field(component, WCD938X_HPH_PA_CTL2,
+				      WCD938X_HPHPA_GND_R_MASK, 1);
+	if (*zl < (WCD938X_ZDET_VAL_32/1000))
+		wcd938x_mbhc_zdet_ramp(component, &zdet_param[0], &z1Ls, NULL, d1);
+	else
+		wcd938x_mbhc_zdet_ramp(component, &zdet_param[1], &z1Ls, NULL, d1);
+	snd_soc_component_write_field(component, WCD938X_HPH_PA_CTL2,
+				      WCD938X_HPHPA_GND_R_MASK, 0);
+	snd_soc_component_write_field(component, WCD938X_HPH_R_ATEST,
+				      WCD938X_HPHPA_GND_OVR_MASK, 0);
+	z1Ls /= 1000;
+	wcd938x_wcd_mbhc_qfuse_cal(component, &z1Ls, 0);
+	/* Parallel of left Z and 9 ohm pull down resistor */
+	zMono = ((*zl) * 9) / ((*zl) + 9);
+	z_diff1 = (z1Ls > zMono) ? (z1Ls - zMono) : (zMono - z1Ls);
+	z_diff2 = ((*zl) > z1Ls) ? ((*zl) - z1Ls) : (z1Ls - (*zl));
+	if ((z_diff1 * (*zl + z1Ls)) > (z_diff2 * (z1Ls + zMono))) {
+		dev_dbg(component->dev, "%s: stereo plug type detected\n",
+			__func__);
+		wcd_mbhc_set_hph_type(wcd938x->wcd_mbhc, WCD_MBHC_HPH_STEREO);
+	} else {
+		dev_dbg(component->dev, "%s: MONO plug type detected\n",
+			__func__);
+		wcd_mbhc_set_hph_type(wcd938x->wcd_mbhc, WCD_MBHC_HPH_MONO);
+	}
+
+	/* Enable surge protection again after impedance detection */
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_HPH_SURGE_HPHLR_SURGE_EN, 0xC0, 0xC0);
+zdet_complete:
+	snd_soc_component_write(component, WCD938X_ANA_MBHC_BTN5, reg0);
+	snd_soc_component_write(component, WCD938X_ANA_MBHC_BTN6, reg1);
+	snd_soc_component_write(component, WCD938X_ANA_MBHC_BTN7, reg2);
+	/* Turn on 100k pull down on HPHL */
+	regmap_update_bits(wcd938x->regmap,
+			   WCD938X_ANA_MBHC_MECH, 0x01, 0x01);
+
+	/* For NO-jack, re-enable L_DET_EN after Z-det measurements */
+	if (wcd938x->mbhc_cfg.hphl_swh)
+		regmap_update_bits(wcd938x->regmap,
+				   WCD938X_ANA_MBHC_MECH, 0x80, 0x80);
+
+	snd_soc_component_write(component, WCD938X_MBHC_NEW_ZDET_ANA_CTL, reg4);
+	snd_soc_component_write(component, WCD938X_MBHC_CTL_CLK, reg3);
+	if (is_fsm_disable)
+		regmap_update_bits(wcd938x->regmap,
+				   WCD938X_ANA_MBHC_ELECT, 0x80, 0x80);
+}
+
+static void wcd938x_mbhc_gnd_det_ctrl(struct snd_soc_component *component,
+			bool enable)
+{
+	if (enable) {
+		snd_soc_component_write_field(component, WCD938X_ANA_MBHC_MECH,
+					      WCD938X_MBHC_HSG_PULLUP_COMP_EN, 1);
+		snd_soc_component_write_field(component, WCD938X_ANA_MBHC_MECH,
+					      WCD938X_MBHC_GND_DET_EN_MASK, 1);
+	} else {
+		snd_soc_component_write_field(component, WCD938X_ANA_MBHC_MECH,
+					      WCD938X_MBHC_GND_DET_EN_MASK, 0);
+		snd_soc_component_write_field(component, WCD938X_ANA_MBHC_MECH,
+					      WCD938X_MBHC_HSG_PULLUP_COMP_EN, 0);
+	}
+}
+
+static void wcd938x_mbhc_hph_pull_down_ctrl(struct snd_soc_component *component,
+					  bool enable)
+{
+	snd_soc_component_write_field(component, WCD938X_HPH_PA_CTL2,
+				      WCD938X_HPHPA_GND_R_MASK, enable);
+	snd_soc_component_write_field(component, WCD938X_HPH_PA_CTL2,
+				      WCD938X_HPHPA_GND_L_MASK, enable);
+}
+
+static void wcd938x_mbhc_moisture_config(struct snd_soc_component *component)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+
+	if (wcd938x->mbhc_cfg.moist_rref == R_OFF) {
+		snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+				    WCD938X_M_RTH_CTL_MASK, R_OFF);
+		return;
+	}
+
+	/* Do not enable moisture detection if jack type is NC */
+	if (!wcd938x->mbhc_cfg.hphl_swh) {
+		dev_dbg(component->dev, "%s: disable moisture detection for NC\n",
+			__func__);
+		snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+				    WCD938X_M_RTH_CTL_MASK, R_OFF);
+		return;
+	}
+
+	snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+			    WCD938X_M_RTH_CTL_MASK, wcd938x->mbhc_cfg.moist_rref);
+}
+
+static void wcd938x_mbhc_moisture_detect_en(struct snd_soc_component *component, bool enable)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+
+	if (enable)
+		snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+					WCD938X_M_RTH_CTL_MASK, wcd938x->mbhc_cfg.moist_rref);
+	else
+		snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+				    WCD938X_M_RTH_CTL_MASK, R_OFF);
+}
+
+static bool wcd938x_mbhc_get_moisture_status(struct snd_soc_component *component)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+	bool ret = false;
+
+	if (wcd938x->mbhc_cfg.moist_rref == R_OFF) {
+		snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+				    WCD938X_M_RTH_CTL_MASK, R_OFF);
+		goto done;
+	}
+
+	/* Do not enable moisture detection if jack type is NC */
+	if (!wcd938x->mbhc_cfg.hphl_swh) {
+		dev_dbg(component->dev, "%s: disable moisture detection for NC\n",
+			__func__);
+		snd_soc_component_write_field(component, WCD938X_MBHC_NEW_CTL_2,
+				    WCD938X_M_RTH_CTL_MASK, R_OFF);
+		goto done;
+	}
+
+	/*
+	 * If moisture_en is already enabled, then skip to plug type
+	 * detection.
+	 */
+	if (snd_soc_component_read_field(component, WCD938X_MBHC_NEW_CTL_2, WCD938X_M_RTH_CTL_MASK))
+		goto done;
+
+	wcd938x_mbhc_moisture_detect_en(component, true);
+	/* Read moisture comparator status */
+	ret = ((snd_soc_component_read(component, WCD938X_MBHC_NEW_FSM_STATUS)
+				& 0x20) ? 0 : 1);
+
+done:
+	return ret;
+
+}
+
+static void wcd938x_mbhc_moisture_polling_ctrl(struct snd_soc_component *component,
+						bool enable)
+{
+	snd_soc_component_write_field(component,
+			      WCD938X_MBHC_NEW_INT_MOISTURE_DET_POLLING_CTRL,
+			      WCD938X_MOISTURE_EN_POLLING_MASK, enable);
+}
+
+static const struct wcd_mbhc_cb mbhc_cb = {
+	.clk_setup = wcd938x_mbhc_clk_setup,
+	.mbhc_bias = wcd938x_mbhc_mbhc_bias_control,
+	.set_btn_thr = wcd938x_mbhc_program_btn_thr,
+	.micbias_enable_status = wcd938x_mbhc_micb_en_status,
+	.hph_pull_up_control_v2 = wcd938x_mbhc_hph_l_pull_up_control,
+	.mbhc_micbias_control = wcd938x_mbhc_request_micbias,
+	.mbhc_micb_ramp_control = wcd938x_mbhc_micb_ramp_control,
+	.mbhc_micb_ctrl_thr_mic = wcd938x_mbhc_micb_ctrl_threshold_mic,
+	.compute_impedance = wcd938x_wcd_mbhc_calc_impedance,
+	.mbhc_gnd_det_ctrl = wcd938x_mbhc_gnd_det_ctrl,
+	.hph_pull_down_ctrl = wcd938x_mbhc_hph_pull_down_ctrl,
+	.mbhc_moisture_config = wcd938x_mbhc_moisture_config,
+	.mbhc_get_moisture_status = wcd938x_mbhc_get_moisture_status,
+	.mbhc_moisture_polling_ctrl = wcd938x_mbhc_moisture_polling_ctrl,
+	.mbhc_moisture_detect_en = wcd938x_mbhc_moisture_detect_en,
+};
+
+static int wcd938x_get_hph_type(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = wcd_mbhc_get_hph_type(wcd938x->wcd_mbhc);
+
+	return 0;
+}
+
+static int wcd938x_hph_impedance_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	uint32_t zl, zr;
+	bool hphr;
+	struct soc_mixer_control *mc;
+	struct snd_soc_component *component =
+					snd_soc_kcontrol_component(kcontrol);
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+
+	mc = (struct soc_mixer_control *)(kcontrol->private_value);
+	hphr = mc->shift;
+	wcd_mbhc_get_impedance(wcd938x->wcd_mbhc, &zl, &zr);
+	dev_dbg(component->dev, "%s: zl=%u(ohms), zr=%u(ohms)\n", __func__, zl, zr);
+	ucontrol->value.integer.value[0] = hphr ? zr : zl;
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new hph_type_detect_controls[] = {
+	SOC_SINGLE_EXT("HPH Type", 0, 0, UINT_MAX, 0,
+		       wcd938x_get_hph_type, NULL),
+};
+
+static const struct snd_kcontrol_new impedance_detect_controls[] = {
+	SOC_SINGLE_EXT("HPHL Impedance", 0, 0, UINT_MAX, 0,
+		       wcd938x_hph_impedance_get, NULL),
+	SOC_SINGLE_EXT("HPHR Impedance", 0, 1, UINT_MAX, 0,
+		       wcd938x_hph_impedance_get, NULL),
+};
+
+static int wcd938x_mbhc_init(struct snd_soc_component *component)
+{
+	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
+	struct wcd_mbhc_intr *intr_ids = &wcd938x->intr_ids;
+
+	intr_ids->mbhc_sw_intr = regmap_irq_get_virq(wcd938x->irq_chip,
+						    WCD938X_IRQ_MBHC_SW_DET);
+	intr_ids->mbhc_btn_press_intr = regmap_irq_get_virq(wcd938x->irq_chip,
+							   WCD938X_IRQ_MBHC_BUTTON_PRESS_DET);
+	intr_ids->mbhc_btn_release_intr = regmap_irq_get_virq(wcd938x->irq_chip,
+							     WCD938X_IRQ_MBHC_BUTTON_RELEASE_DET);
+	intr_ids->mbhc_hs_ins_intr = regmap_irq_get_virq(wcd938x->irq_chip,
+							WCD938X_IRQ_MBHC_ELECT_INS_REM_LEG_DET);
+	intr_ids->mbhc_hs_rem_intr = regmap_irq_get_virq(wcd938x->irq_chip,
+							WCD938X_IRQ_MBHC_ELECT_INS_REM_DET);
+	intr_ids->hph_left_ocp = regmap_irq_get_virq(wcd938x->irq_chip,
+						    WCD938X_IRQ_HPHL_OCP_INT);
+	intr_ids->hph_right_ocp = regmap_irq_get_virq(wcd938x->irq_chip,
+						     WCD938X_IRQ_HPHR_OCP_INT);
+
+	wcd938x->wcd_mbhc = wcd_mbhc_init(component, &mbhc_cb, intr_ids, wcd_mbhc_fields, true);
+
+	snd_soc_add_component_controls(component, impedance_detect_controls,
+				       ARRAY_SIZE(impedance_detect_controls));
+	snd_soc_add_component_controls(component, hph_type_detect_controls,
+				       ARRAY_SIZE(hph_type_detect_controls));
+
+	return 0;
+}
+/* END MBHC */
+
 static const struct snd_kcontrol_new wcd938x_snd_controls[] = {
 	SOC_SINGLE_EXT("HPHL_COMP Switch", WCD938X_COMP_L, 0, 1, 0,
 		       wcd938x_get_compander, wcd938x_set_compander),
@@ -3222,15 +3995,6 @@  static const struct snd_soc_dapm_route wcd938x_audio_map[] = {
 	{"EAR", NULL, "EAR PGA"},
 };
 
-static int wcd938x_get_micb_vout_ctl_val(u32 micb_mv)
-{
-	/* min micbias voltage is 1V and maximum is 2.85V */
-	if (micb_mv < 1000 || micb_mv > 2850)
-		return -EINVAL;
-
-	return (micb_mv - 1000) / 50;
-}
-
 static int wcd938x_set_micbias_data(struct wcd938x_priv *wcd938x)
 {
 	int vout_ctl_1, vout_ctl_2, vout_ctl_3, vout_ctl_4;
@@ -3369,10 +4133,27 @@  static int wcd938x_soc_codec_probe(struct snd_soc_component *component)
 	default:
 		break;
 	}
+
+	ret = wcd938x_mbhc_init(component);
+	if (ret)
+		dev_err(component->dev,  "mbhc initialization failed\n");
 err:
 	return ret;
 }
 
+static int wcd938x_codec_set_jack(struct snd_soc_component *comp,
+				  struct snd_soc_jack *jack, void *data)
+{
+	struct wcd938x_priv *wcd = dev_get_drvdata(comp->dev);
+
+	if (!jack)
+		return wcd_mbhc_start(wcd->wcd_mbhc, &wcd->mbhc_cfg, jack);
+
+	wcd_mbhc_stop(wcd->wcd_mbhc);
+
+	return 0;
+}
+
 static const struct snd_soc_component_driver soc_codec_dev_wcd938x = {
 	.name = "wcd938x_codec",
 	.probe = wcd938x_soc_codec_probe,
@@ -3382,6 +4163,7 @@  static const struct snd_soc_component_driver soc_codec_dev_wcd938x = {
 	.num_dapm_widgets = ARRAY_SIZE(wcd938x_dapm_widgets),
 	.dapm_routes = wcd938x_audio_map,
 	.num_dapm_routes = ARRAY_SIZE(wcd938x_audio_map),
+	.set_jack = wcd938x_codec_set_jack,
 };
 
 static void wcd938x_dt_parse_micbias_info(struct device *dev, struct wcd938x_priv *wcd)
@@ -3417,6 +4199,7 @@  static void wcd938x_dt_parse_micbias_info(struct device *dev, struct wcd938x_pri
 
 static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device *dev)
 {
+	struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg;
 	int ret;
 
 	wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
@@ -3445,6 +4228,17 @@  static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
 
 	wcd938x_dt_parse_micbias_info(dev, wcd938x);
 
+	cfg->mbhc_micbias = MIC_BIAS_2;
+	cfg->anc_micbias = MIC_BIAS_2;
+	cfg->v_hs_max = WCD_MBHC_HS_V_MAX;
+	cfg->num_btn = WCD938X_MBHC_MAX_BUTTONS;
+	cfg->micb_mv = wcd938x->micb2_mv;
+	cfg->linein_th = 5000;
+	cfg->hs_thr = 1700;
+	cfg->hph_thr = 50;
+
+	wcd_dt_parse_mbhc_data(dev, cfg);
+
 	return 0;
 }
 
@@ -3676,6 +4470,7 @@  static int wcd938x_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dev_set_drvdata(dev, wcd938x);
+	mutex_init(&wcd938x->micb_lock);
 
 	ret = wcd938x_populate_dt_data(wcd938x, dev);
 	if (ret) {