| Message ID | 20210726190130.1973-2-macroalpha82@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | power: supply: Add Support for RK817 Charger | expand |
Hi, On Mon, Jul 26, 2021 at 02:01:27PM -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Create dt-binding documentation to document rk817 battery and charger > usage. New device-tree properties have been added. > > - rockchip,resistor-sense: The value in microohms of the sample > resistor. > - rockchip,sleep-enter-current: The value in microamps of the sleep > enter current. > - rockchip,sleep-filter-current: The value in microamps of the sleep > filter current. please use common property units: https://github.com/devicetree-org/dt-schema/blob/master/schemas/property-units.yaml -- Sebastian > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> > --- > .../devicetree/bindings/mfd/rk808.txt | 35 +++++++++++++++++-- > 1 file changed, 33 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt > index 23a17a6663ec..fa42b6253d26 100644 > --- a/Documentation/devicetree/bindings/mfd/rk808.txt > +++ b/Documentation/devicetree/bindings/mfd/rk808.txt > @@ -70,13 +70,37 @@ Optional RK817 properties: > > - vcc8-supply: The input supply for BOOST > - vcc9-supply: The input supply for OTG_SWITCH > + > - codec: The child node for the codec to hold additional properties. > If no additional properties are required for the codec, this > node can be omitted. > - > -- rockchip,mic-in-differential: Telling if the microphone uses differential > +- rockchip,mic-in-differential: Telling if the microphone uses differential > mode. Should be under the codec child node. > > +- battery: The child node for the charger to hold additional properties. > + If a battery is not in use, this node can be omitted. If a > + battery node is used, the following values are required: > + rockchip,resistor-sense, rockchip,sleep-enter-current, > + rockchip,sleep-filter-current, and a phandle to a > + monitored-battery node that contains a valid value for > + charge-full-design-microamp-hours, > + charge-term-current-microamp, > + constant-charge-current-max-microamp, > + constant-charge-voltage-max-microvolt, > + voltage-max-design-microvolt, voltage-min-design-microvolt, > + and a valid ocv-capacity table. > +- rockchip,resistor-sense: Value in microohms of the battery sense resistor. > + The PMIC only supports values of either 10000 or > + 20000. This value is used by the driver to set > + the correct divisor value to translate ADC readings > + into the proper units of measure. > +- rockchip,sleep-enter-current: Value in microamps of the sleep enter current > + for the charger. Value is used by the driver > + to calibrate the relax threshold. > +- rockchip,sleep-filter-current: Value in microamps of the sleep filter current > + for the charger. Value is used by the driver > + to derive the sleep sample current. > + > Optional RK818 properties: > - vcc1-supply: The input supply for DCDC_REG1 > - vcc2-supply: The input supply for DCDC_REG2 > @@ -459,6 +483,13 @@ Example: > }; > }; > > + rk817_battery: battery { > + monitored-battery = <&battery_cell>; > + rockchip,resistor-sense = <10000>; > + rockchip,sleep-enter-current = <300000>; > + rockchip,sleep-filter-current = <100000>; > + }; > + > rk817_codec: codec { > rockchip,mic-in-differential; > }; > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt index 23a17a6663ec..fa42b6253d26 100644 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/Documentation/devicetree/bindings/mfd/rk808.txt @@ -70,13 +70,37 @@ Optional RK817 properties: - vcc8-supply: The input supply for BOOST - vcc9-supply: The input supply for OTG_SWITCH + - codec: The child node for the codec to hold additional properties. If no additional properties are required for the codec, this node can be omitted. - -- rockchip,mic-in-differential: Telling if the microphone uses differential +- rockchip,mic-in-differential: Telling if the microphone uses differential mode. Should be under the codec child node. +- battery: The child node for the charger to hold additional properties. + If a battery is not in use, this node can be omitted. If a + battery node is used, the following values are required: + rockchip,resistor-sense, rockchip,sleep-enter-current, + rockchip,sleep-filter-current, and a phandle to a + monitored-battery node that contains a valid value for + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, voltage-min-design-microvolt, + and a valid ocv-capacity table. +- rockchip,resistor-sense: Value in microohms of the battery sense resistor. + The PMIC only supports values of either 10000 or + 20000. This value is used by the driver to set + the correct divisor value to translate ADC readings + into the proper units of measure. +- rockchip,sleep-enter-current: Value in microamps of the sleep enter current + for the charger. Value is used by the driver + to calibrate the relax threshold. +- rockchip,sleep-filter-current: Value in microamps of the sleep filter current + for the charger. Value is used by the driver + to derive the sleep sample current. + Optional RK818 properties: - vcc1-supply: The input supply for DCDC_REG1 - vcc2-supply: The input supply for DCDC_REG2 @@ -459,6 +483,13 @@ Example: }; }; + rk817_battery: battery { + monitored-battery = <&battery_cell>; + rockchip,resistor-sense = <10000>; + rockchip,sleep-enter-current = <300000>; + rockchip,sleep-filter-current = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; };