| Message ID | 20210809080729.57029-1-puranjay12@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | iio: accel: add support for ADXL355 | expand |
On Mon, 9 Aug 2021 13:37:27 +0530 Puranjay Mohan <puranjay12@gmail.com> wrote: > Add the dt-bindings and the driver for ADXL355 3-axis MEMS Accelerometer. Hi Puranjay, So these both look fine to me (subject to that tiny cleanup in patch 2 that I'll do whilst applying). Now we need to give time for a device tree review. It's in their patchwork instance and passing the tests so Rob will get to it fairly soon. https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210809080729.57029-2-puranjay12@gmail.com/ Jonathan > > Changes since v8: > 1. Make scale and offset defines inline and remove them. > 2. Change dt-binding doc to state interrupt polarity only for DRDY pin. > 3. Remove triggered buffer support from this patch series. > > Changes since v7: > 1. Update MAINTAINERS to show all driver files. > 2. Set CONFIGS for buffered support in Kconfig. > > Changes since v6: > 1. Use interrupt-names property in device tree document. > 2. Add triggered buffer support. > 3. Use a static table for offset and data registers. > 4. Fix coding style issues. > 5. move defines from header to c file. > > Changes since v5: > 1. Used get_unaligned_be24() and get_unaligned_be16() to parse > acceleration and temperature data. This solves sparse errors and also > make the code more understandable. > > Changes since v4: > 1. Fix errors reported by sparse. > > Changes since v3: > 1. Fix errors in yaml DT doc. > 2. Change SPDX-License-Identifier to GPL-2.0-only OR BSD-2-Clause > > Changes since v2: > 1. Add separate DT binding doc in yaml. > 2. Use ____cacheline_aligned buffer for regmap_bulk_read/write calls. > 3. Make code consistent by using same style in switch case. > 4. Use FIELD_PREP in place of custom macros. > 5. Make Kconfig description more informative. > > Changes since v1: > 1. Remove the declarations for static regmap structures from adxl355.h. > This was missed in the v1 and caused errors. > 2. Make switch case statements consistent by directly returning from > each case rather than saving the return in a variable. > 3. Some coding style changes. > > Changes since v0: > 1. Move adxl355_hpf_3db_table to adxl355_data structure. This is done to make > sure that each device gets its own table. > 2. Make local regmap definitions private to adxl355_core.c. > 3. Other minor coding style changes. > > Puranjay Mohan (2): > dt-bindings: iio: accel: Add DT binding doc for ADXL355 > iio: accel: Add driver support for ADXL355 > > .../bindings/iio/accel/adi,adxl355.yaml | 88 +++ > MAINTAINERS | 10 + > drivers/iio/accel/Kconfig | 29 + > drivers/iio/accel/Makefile | 3 + > drivers/iio/accel/adxl355.h | 19 + > drivers/iio/accel/adxl355_core.c | 578 ++++++++++++++++++ > drivers/iio/accel/adxl355_i2c.c | 64 ++ > drivers/iio/accel/adxl355_spi.c | 67 ++ > 8 files changed, 858 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > create mode 100644 drivers/iio/accel/adxl355.h > create mode 100644 drivers/iio/accel/adxl355_core.c > create mode 100644 drivers/iio/accel/adxl355_i2c.c > create mode 100644 drivers/iio/accel/adxl355_spi.c >