| Message ID | 20210723153838.6785-2-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: sunxi: Initial Allwinner H616 SoC support | expand |
On Fri, 23 Jul 2021, Andre Przywara wrote: > The AXP305 PMIC used on many boards with the H616 SoC seems to be fully > compatible to the AXP805 PMIC, so add the proper chain of compatible > strings. > > Also at least on one board (Orangepi Zero2) there is no interrupt line > connected to the CPU, so make the "interrupts" property optional. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) Applied, thanks.
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 4991a6415796..2b53dcc0ea61 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -26,10 +26,10 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp805", "x-powers,axp806" + * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806" * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 @@ -43,6 +43,7 @@ more information: AXP20x/LDO3: software-based implementation Optional properties: +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz AXP22X/8XX: range: 1800-4050, Default: 3 MHz