[v6,21/21] docs: Document the FAN_FS_ERROR event

Commit Message

Gabriel Krisman Bertazi Aug. 12, 2021, 9:40 p.m. UTC

Document the FAN_FS_ERROR event for user administrators and user space
developers.

Reviewed-by: Amir Goldstein <[e-mail]>
Signed-off-by: Gabriel Krisman Bertazi <[e-mail]>

---
Changes Since v4:
  - Update documentation about reporting non-file error.
Changes Since v3:
  - Move FAN_FS_ERROR notification into a subsection of the file.
Changes Since v2:
  - NTR
Changes since v1:
  - Drop references to location record
  - Explain that the inode field is optional
  - Explain we are reporting only the first error
---
 .../admin-guide/filesystem-monitoring.rst     | 70 +++++++++++++++++++
 Documentation/admin-guide/index.rst           |  1 +
 2 files changed, 71 insertions(+)
 create mode 100644 Documentation/admin-guide/filesystem-monitoring.rst

Comments

Jan Kara Aug. 16, 2021, 4:40 p.m. UTC | #1

On Thu 12-08-21 17:40:10, Gabriel Krisman Bertazi wrote:
> Document the FAN_FS_ERROR event for user administrators and user space
> developers.
> 
> Reviewed-by: Amir Goldstein <[e-mail]>
> Signed-off-by: Gabriel Krisman Bertazi <[e-mail]>

<snip>

> diff --git a/Documentation/admin-guide/filesystem-monitoring.rst b/Documentation/admin-guide/filesystem-monitoring.rst
> new file mode 100644
> index 000000000000..b03093567a93
> --- /dev/null
> +++ b/Documentation/admin-guide/filesystem-monitoring.rst
> @@ -0,0 +1,70 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +====================================
> +File system Monitoring with fanotify
> +====================================
> +
> +File system Error Reporting
> +===========================
> +
> +fanotify supports the FAN_FS_ERROR mark for file system-wide error
   ^ Capital 'F'.                     ^^^ I'd rather write "event type".

> +reporting.  It is meant to be used by file system health monitoring
> +daemons who listen on that interface and take actions (notify sysadmin,
           ^^^ which  ^^^^^^^^^^^^^^^^^ for these events

> +start recovery) when a file system problem is detected by the kernel.
> +
> +By design, A FAN_FS_ERROR notification exposes sufficient information for a
> +monitoring tool to know a problem in the file system has happened.  It
> +doesn't necessarily provide a user space application with semantics to
> +verify an IO operation was successfully executed.  That is outside of
> +scope of this feature. Instead, it is only meant as a framework for
> +early file system problem detection and reporting recovery tools.
> +
> +When a file system operation fails, it is common for dozens of kernel
> +errors to cascade after the initial failure, hiding the original failure
> +log, which is usually the most useful debug data to troubleshoot the
> +problem.  For this reason, FAN_FS_ERROR only reports the first error that
> +occurred since the last notification, and it simply counts addition
							      ^^^ additional

> +errors.  This ensures that the most important piece of error information
> +is never lost.
> +
> +FAN_FS_ERROR requires the fanotify group to be setup with the
> +FAN_REPORT_FID flag.
> +
> +At the time of this writing, the only file system that emits FAN_FS_ERROR
> +notifications is Ext4.
> +
> +A user space example code is provided at ``samples/fanotify/fs-monitor.c``.
> +
> +A FAN_FS_ERROR Notification has the following format::
> +
> +  [ Notification Metadata (Mandatory) ]
> +  [ Generic Error Record  (Mandatory) ]
> +  [ FID record            (Mandatory) ]
> +
> +Generic error record
> +--------------------
> +
> +The generic error record provides enough information for a file system
> +agnostic tool to learn about a problem in the file system, without
> +providing any additional details about the problem.  This record is
> +identified by ``struct fanotify_event_info_header.info_type`` being set
> +to FAN_EVENT_INFO_TYPE_ERROR.
> +
> +  struct fanotify_event_info_error {
> +	struct fanotify_event_info_header hdr;
> +	__s32 error;
> +	__u32 error_count;
> +  };
> +
> +The `error` field identifies the type of error. `error_count` count
> +tracks the number of errors that occurred and were suppressed to
> +preserve the original error, since the last notification.

So is 'error' expected to be errno? Or is that some fs-specific error
identifier? Will it be positive (i.e. real errno) or negative (as errno is
usually passed in the kernel)? I think it should be specified here.

								Honza

Patch

diff --git a/Documentation/admin-guide/filesystem-monitoring.rst b/Documentation/admin-guide/filesystem-monitoring.rst
new file mode 100644
index 000000000000..b03093567a93
--- /dev/null
+++ b/Documentation/admin-guide/filesystem-monitoring.rst
@@ -0,0 +1,70 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================
+File system Monitoring with fanotify
+====================================
+
+File system Error Reporting
+===========================
+
+fanotify supports the FAN_FS_ERROR mark for file system-wide error
+reporting.  It is meant to be used by file system health monitoring
+daemons who listen on that interface and take actions (notify sysadmin,
+start recovery) when a file system problem is detected by the kernel.
+
+By design, A FAN_FS_ERROR notification exposes sufficient information for a
+monitoring tool to know a problem in the file system has happened.  It
+doesn't necessarily provide a user space application with semantics to
+verify an IO operation was successfully executed.  That is outside of
+scope of this feature. Instead, it is only meant as a framework for
+early file system problem detection and reporting recovery tools.
+
+When a file system operation fails, it is common for dozens of kernel
+errors to cascade after the initial failure, hiding the original failure
+log, which is usually the most useful debug data to troubleshoot the
+problem.  For this reason, FAN_FS_ERROR only reports the first error that
+occurred since the last notification, and it simply counts addition
+errors.  This ensures that the most important piece of error information
+is never lost.
+
+FAN_FS_ERROR requires the fanotify group to be setup with the
+FAN_REPORT_FID flag.
+
+At the time of this writing, the only file system that emits FAN_FS_ERROR
+notifications is Ext4.
+
+A user space example code is provided at ``samples/fanotify/fs-monitor.c``.
+
+A FAN_FS_ERROR Notification has the following format::
+
+  [ Notification Metadata (Mandatory) ]
+  [ Generic Error Record  (Mandatory) ]
+  [ FID record            (Mandatory) ]
+
+Generic error record
+--------------------
+
+The generic error record provides enough information for a file system
+agnostic tool to learn about a problem in the file system, without
+providing any additional details about the problem.  This record is
+identified by ``struct fanotify_event_info_header.info_type`` being set
+to FAN_EVENT_INFO_TYPE_ERROR.
+
+  struct fanotify_event_info_error {
+	struct fanotify_event_info_header hdr;
+	__s32 error;
+	__u32 error_count;
+  };
+
+The `error` field identifies the type of error. `error_count` count
+tracks the number of errors that occurred and were suppressed to
+preserve the original error, since the last notification.
+
+FID record
+----------
+
+The FID record can be used to uniquely identify the inode that triggered
+the error through the combination of fsid and file handle.  A file system
+specific application can use that information to attempt a recovery
+procedure.  Errors that are not related to an inode are reported with an
+empty file handle, with type FILEID_INVALID.
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index dc00afcabb95..1bedab498104 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -82,6 +82,7 @@  configure specific aspects of kernel behavior to your liking.
    edid
    efi-stub
    ext4
+   filesystem-monitoring
    nfs/index
    gpio/index
    highuid