Message ID | 20210818190731.19170-2-luke@ljones.dev (mailing list archive) |
---|---|
State | Accepted, archived |
Headers | show |
Series | asus-wmi: add platform_profile support | expand |
Hi 2021. augusztus 18., szerda 21:07 keltezéssel, Luke D. Jones írta: > Add initial support for platform_profile where the support is > based on availability of ASUS_THROTTLE_THERMAL_POLICY. > > Because throttle_thermal_policy is used by platform_profile and is > writeable separately to platform_profile any userspace changes to > throttle_thermal_policy need to notify platform_profile. > > In future throttle_thermal_policy sysfs should be removed so that > only one method controls the laptop power profile. > > Signed-off-by: Luke D. Jones <luke@ljones.dev> > --- > drivers/platform/x86/Kconfig | 1 + > drivers/platform/x86/asus-wmi.c | 130 +++++++++++++++++++++++++++++++- > 2 files changed, 127 insertions(+), 4 deletions(-) > > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index d12db6c316ea..46dec48a36c1 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > [...] > +static int platform_profile_set(struct platform_profile_handler *pprof, > + enum platform_profile_option profile) > +{ > + struct asus_wmi *asus; > + int tp; > + > + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); > + > + switch (profile) { > + case PLATFORM_PROFILE_PERFORMANCE: > + tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; > + break; > + case PLATFORM_PROFILE_BALANCED: > + tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > + break; > + case PLATFORM_PROFILE_QUIET: > + tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT; > + break; > + default: > + return -EOPNOTSUPP; > + } > + > + asus->throttle_thermal_policy_mode = tp; > + return throttle_thermal_policy_write(asus); Here the new mode will be stored even if activating it fails, no? > +} > [...] Best regards, Barnabás Pőcze
Hi, On 8/18/21 9:25 PM, Barnabás Pőcze wrote: > Hi > > > 2021. augusztus 18., szerda 21:07 keltezéssel, Luke D. Jones írta: >> Add initial support for platform_profile where the support is >> based on availability of ASUS_THROTTLE_THERMAL_POLICY. >> >> Because throttle_thermal_policy is used by platform_profile and is >> writeable separately to platform_profile any userspace changes to >> throttle_thermal_policy need to notify platform_profile. >> >> In future throttle_thermal_policy sysfs should be removed so that >> only one method controls the laptop power profile. >> >> Signed-off-by: Luke D. Jones <luke@ljones.dev> >> --- >> drivers/platform/x86/Kconfig | 1 + >> drivers/platform/x86/asus-wmi.c | 130 +++++++++++++++++++++++++++++++- >> 2 files changed, 127 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig >> index d12db6c316ea..46dec48a36c1 100644 >> --- a/drivers/platform/x86/Kconfig >> +++ b/drivers/platform/x86/Kconfig >> [...] >> +static int platform_profile_set(struct platform_profile_handler *pprof, >> + enum platform_profile_option profile) >> +{ >> + struct asus_wmi *asus; >> + int tp; >> + >> + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); >> + >> + switch (profile) { >> + case PLATFORM_PROFILE_PERFORMANCE: >> + tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; >> + break; >> + case PLATFORM_PROFILE_BALANCED: >> + tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; >> + break; >> + case PLATFORM_PROFILE_QUIET: >> + tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT; >> + break; >> + default: >> + return -EOPNOTSUPP; >> + } >> + >> + asus->throttle_thermal_policy_mode = tp; >> + return throttle_thermal_policy_write(asus); > > Here the new mode will be stored even if activating it fails, no? Yes I noticed this too. This is the same way how writing to the throttle_thermal_policy sysfs file works, so this is consistent. I know it is a bit weird, but normally the throttle_thermal_policy_write() call never fails (throttle_thermal_policy_store does not check it at all). And even if it fails, what does that mean we certainly did make the ACPI call maybe the profile was actually changed but then some later ACPI code setting up the return buffer failed ? Or maybe the ACPI code did actually never get around to forwarding the value to e.g. the EC ? We basically don't know ... IOW I think this is fine as is, it is a bit weird but it is consistent with the existing callers of throttle_thermal_policy_write(). Regards, Hans
Hi, On 8/18/21 9:07 PM, Luke D. Jones wrote: > Add initial support for platform_profile where the support is > based on availability of ASUS_THROTTLE_THERMAL_POLICY. > > Because throttle_thermal_policy is used by platform_profile and is > writeable separately to platform_profile any userspace changes to > throttle_thermal_policy need to notify platform_profile. > > In future throttle_thermal_policy sysfs should be removed so that > only one method controls the laptop power profile. > > Signed-off-by: Luke D. Jones <luke@ljones.dev> Thank you for your patch, I've applied this patch to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while. Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > --- > drivers/platform/x86/Kconfig | 1 + > drivers/platform/x86/asus-wmi.c | 130 +++++++++++++++++++++++++++++++- > 2 files changed, 127 insertions(+), 4 deletions(-) > > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index d12db6c316ea..46dec48a36c1 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -281,6 +281,7 @@ config ASUS_WMI > select INPUT_SPARSEKMAP > select LEDS_CLASS > select NEW_LEDS > + select ACPI_PLATFORM_PROFILE > help > Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new > Asus Notebooks). > diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c > index 90a6a0d00deb..cc5811844012 100644 > --- a/drivers/platform/x86/asus-wmi.c > +++ b/drivers/platform/x86/asus-wmi.c > @@ -26,6 +26,7 @@ > #include <linux/rfkill.h> > #include <linux/pci.h> > #include <linux/pci_hotplug.h> > +#include <linux/platform_profile.h> > #include <linux/power_supply.h> > #include <linux/hwmon.h> > #include <linux/hwmon-sysfs.h> > @@ -219,6 +220,9 @@ struct asus_wmi { > bool throttle_thermal_policy_available; > u8 throttle_thermal_policy_mode; > > + struct platform_profile_handler platform_profile_handler; > + bool platform_profile_support; > + > // The RSOC controls the maximum charging percentage. > bool battery_rsoc_available; > > @@ -2103,12 +2107,23 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus) > static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) > { > u8 new_mode = asus->throttle_thermal_policy_mode + 1; > + int err; > > if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > > asus->throttle_thermal_policy_mode = new_mode; > - return throttle_thermal_policy_write(asus); > + err = throttle_thermal_policy_write(asus); > + if (err) > + return err; > + > + /* > + * Ensure that platform_profile updates userspace with the change to ensure > + * that platform_profile and throttle_thermal_policy_mode are in sync. > + */ > + platform_profile_notify(); > + > + return 0; > } > > static ssize_t throttle_thermal_policy_show(struct device *dev, > @@ -2124,9 +2139,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, > struct device_attribute *attr, > const char *buf, size_t count) > { > - int result; > - u8 new_mode; > struct asus_wmi *asus = dev_get_drvdata(dev); > + u8 new_mode; > + int result; > + int err; > > result = kstrtou8(buf, 10, &new_mode); > if (result < 0) > @@ -2136,7 +2152,15 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, > return -EINVAL; > > asus->throttle_thermal_policy_mode = new_mode; > - throttle_thermal_policy_write(asus); > + err = throttle_thermal_policy_write(asus); > + if (err) > + return err; > + > + /* > + * Ensure that platform_profile updates userspace with the change to ensure > + * that platform_profile and throttle_thermal_policy_mode are in sync. > + */ > + platform_profile_notify(); > > return count; > } > @@ -2144,6 +2168,94 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, > // Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent > static DEVICE_ATTR_RW(throttle_thermal_policy); > > +/* Platform profile ***********************************************************/ > +static int platform_profile_get(struct platform_profile_handler *pprof, > + enum platform_profile_option *profile) > +{ > + struct asus_wmi *asus; > + int tp; > + > + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); > + > + tp = asus->throttle_thermal_policy_mode; > + > + if (tp < 0) > + return tp; > + > + switch (tp) { > + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: > + *profile = PLATFORM_PROFILE_BALANCED; > + break; > + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: > + *profile = PLATFORM_PROFILE_PERFORMANCE; > + break; > + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: > + *profile = PLATFORM_PROFILE_QUIET; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int platform_profile_set(struct platform_profile_handler *pprof, > + enum platform_profile_option profile) > +{ > + struct asus_wmi *asus; > + int tp; > + > + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); > + > + switch (profile) { > + case PLATFORM_PROFILE_PERFORMANCE: > + tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; > + break; > + case PLATFORM_PROFILE_BALANCED: > + tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > + break; > + case PLATFORM_PROFILE_QUIET: > + tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT; > + break; > + default: > + return -EOPNOTSUPP; > + } > + > + asus->throttle_thermal_policy_mode = tp; > + return throttle_thermal_policy_write(asus); > +} > + > +static int platform_profile_setup(struct asus_wmi *asus) > +{ > + struct device *dev = &asus->platform_device->dev; > + int err; > + > + /* > + * Not an error if a component platform_profile relies on is unavailable > + * so early return, skipping the setup of platform_profile. > + */ > + if (!asus->throttle_thermal_policy_available) > + return 0; > + > + dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n"); > + > + asus->platform_profile_handler.profile_get = platform_profile_get; > + asus->platform_profile_handler.profile_set = platform_profile_set; > + > + set_bit(PLATFORM_PROFILE_QUIET, asus->platform_profile_handler.choices); > + set_bit(PLATFORM_PROFILE_BALANCED, > + asus->platform_profile_handler.choices); > + set_bit(PLATFORM_PROFILE_PERFORMANCE, > + asus->platform_profile_handler.choices); > + > + err = platform_profile_register(&asus->platform_profile_handler); > + if (err) > + return err; > + > + asus->platform_profile_support = true; > + return 0; > +} > + > /* Backlight ******************************************************************/ > > static int read_backlight_power(struct asus_wmi *asus) > @@ -2904,6 +3016,10 @@ static int asus_wmi_add(struct platform_device *pdev) > else > throttle_thermal_policy_set_default(asus); > > + err = platform_profile_setup(asus); > + if (err) > + goto fail_platform_profile_setup; > + > err = panel_od_check_present(asus); > if (err) > goto fail_panel_od; > @@ -2993,6 +3109,9 @@ static int asus_wmi_add(struct platform_device *pdev) > asus_wmi_sysfs_exit(asus->platform_device); > fail_sysfs: > fail_throttle_thermal_policy: > +fail_platform_profile_setup: > + if (asus->platform_profile_support) > + platform_profile_remove(); > fail_fan_boost_mode: > fail_egpu_enable: > fail_dgpu_disable: > @@ -3017,6 +3136,9 @@ static int asus_wmi_remove(struct platform_device *device) > asus_fan_set_auto(asus); > asus_wmi_battery_exit(asus); > > + if (asus->platform_profile_support) > + platform_profile_remove(); > + > kfree(asus); > return 0; > } >
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index d12db6c316ea..46dec48a36c1 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -281,6 +281,7 @@ config ASUS_WMI select INPUT_SPARSEKMAP select LEDS_CLASS select NEW_LEDS + select ACPI_PLATFORM_PROFILE help Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new Asus Notebooks). diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 90a6a0d00deb..cc5811844012 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -26,6 +26,7 @@ #include <linux/rfkill.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> +#include <linux/platform_profile.h> #include <linux/power_supply.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> @@ -219,6 +220,9 @@ struct asus_wmi { bool throttle_thermal_policy_available; u8 throttle_thermal_policy_mode; + struct platform_profile_handler platform_profile_handler; + bool platform_profile_support; + // The RSOC controls the maximum charging percentage. bool battery_rsoc_available; @@ -2103,12 +2107,23 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus) static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) { u8 new_mode = asus->throttle_thermal_policy_mode + 1; + int err; if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; asus->throttle_thermal_policy_mode = new_mode; - return throttle_thermal_policy_write(asus); + err = throttle_thermal_policy_write(asus); + if (err) + return err; + + /* + * Ensure that platform_profile updates userspace with the change to ensure + * that platform_profile and throttle_thermal_policy_mode are in sync. + */ + platform_profile_notify(); + + return 0; } static ssize_t throttle_thermal_policy_show(struct device *dev, @@ -2124,9 +2139,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - int result; - u8 new_mode; struct asus_wmi *asus = dev_get_drvdata(dev); + u8 new_mode; + int result; + int err; result = kstrtou8(buf, 10, &new_mode); if (result < 0) @@ -2136,7 +2152,15 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, return -EINVAL; asus->throttle_thermal_policy_mode = new_mode; - throttle_thermal_policy_write(asus); + err = throttle_thermal_policy_write(asus); + if (err) + return err; + + /* + * Ensure that platform_profile updates userspace with the change to ensure + * that platform_profile and throttle_thermal_policy_mode are in sync. + */ + platform_profile_notify(); return count; } @@ -2144,6 +2168,94 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, // Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent static DEVICE_ATTR_RW(throttle_thermal_policy); +/* Platform profile ***********************************************************/ +static int platform_profile_get(struct platform_profile_handler *pprof, + enum platform_profile_option *profile) +{ + struct asus_wmi *asus; + int tp; + + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); + + tp = asus->throttle_thermal_policy_mode; + + if (tp < 0) + return tp; + + switch (tp) { + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: + *profile = PLATFORM_PROFILE_BALANCED; + break; + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: + *profile = PLATFORM_PROFILE_PERFORMANCE; + break; + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: + *profile = PLATFORM_PROFILE_QUIET; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int platform_profile_set(struct platform_profile_handler *pprof, + enum platform_profile_option profile) +{ + struct asus_wmi *asus; + int tp; + + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); + + switch (profile) { + case PLATFORM_PROFILE_PERFORMANCE: + tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; + break; + case PLATFORM_PROFILE_BALANCED: + tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; + break; + case PLATFORM_PROFILE_QUIET: + tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT; + break; + default: + return -EOPNOTSUPP; + } + + asus->throttle_thermal_policy_mode = tp; + return throttle_thermal_policy_write(asus); +} + +static int platform_profile_setup(struct asus_wmi *asus) +{ + struct device *dev = &asus->platform_device->dev; + int err; + + /* + * Not an error if a component platform_profile relies on is unavailable + * so early return, skipping the setup of platform_profile. + */ + if (!asus->throttle_thermal_policy_available) + return 0; + + dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n"); + + asus->platform_profile_handler.profile_get = platform_profile_get; + asus->platform_profile_handler.profile_set = platform_profile_set; + + set_bit(PLATFORM_PROFILE_QUIET, asus->platform_profile_handler.choices); + set_bit(PLATFORM_PROFILE_BALANCED, + asus->platform_profile_handler.choices); + set_bit(PLATFORM_PROFILE_PERFORMANCE, + asus->platform_profile_handler.choices); + + err = platform_profile_register(&asus->platform_profile_handler); + if (err) + return err; + + asus->platform_profile_support = true; + return 0; +} + /* Backlight ******************************************************************/ static int read_backlight_power(struct asus_wmi *asus) @@ -2904,6 +3016,10 @@ static int asus_wmi_add(struct platform_device *pdev) else throttle_thermal_policy_set_default(asus); + err = platform_profile_setup(asus); + if (err) + goto fail_platform_profile_setup; + err = panel_od_check_present(asus); if (err) goto fail_panel_od; @@ -2993,6 +3109,9 @@ static int asus_wmi_add(struct platform_device *pdev) asus_wmi_sysfs_exit(asus->platform_device); fail_sysfs: fail_throttle_thermal_policy: +fail_platform_profile_setup: + if (asus->platform_profile_support) + platform_profile_remove(); fail_fan_boost_mode: fail_egpu_enable: fail_dgpu_disable: @@ -3017,6 +3136,9 @@ static int asus_wmi_remove(struct platform_device *device) asus_fan_set_auto(asus); asus_wmi_battery_exit(asus); + if (asus->platform_profile_support) + platform_profile_remove(); + kfree(asus); return 0; }
Add initial support for platform_profile where the support is based on availability of ASUS_THROTTLE_THERMAL_POLICY. Because throttle_thermal_policy is used by platform_profile and is writeable separately to platform_profile any userspace changes to throttle_thermal_policy need to notify platform_profile. In future throttle_thermal_policy sysfs should be removed so that only one method controls the laptop power profile. Signed-off-by: Luke D. Jones <luke@ljones.dev> --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/asus-wmi.c | 130 +++++++++++++++++++++++++++++++- 2 files changed, 127 insertions(+), 4 deletions(-)