Message ID | 20210817012754.8710-8-digetx@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | NVIDIA Tegra power management patches for 5.16 | expand |
On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: [...] > +struct clk *tegra_clk_register(struct clk_hw *hw) > +{ > + struct platform_device *pdev; > + struct device *dev = NULL; > + struct device_node *np; > + const char *dev_name; > + > + np = tegra_clk_get_of_node(hw); > + > + if (!of_device_is_available(np)) > + goto put_node; > + > + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); > + if (!dev_name) > + goto put_node; > + > + pdev = of_platform_device_create(np, dev_name, NULL); > + if (!pdev) { > + pr_err("%s: failed to create device for %pOF\n", __func__, np); > + kfree(dev_name); > + goto put_node; > + } > + > + dev = &pdev->dev; > + pm_runtime_enable(dev); > +put_node: > + of_node_put(np); > + > + return clk_register(dev, hw); > +} This looks wrong. Why do we need struct platform_device objects for each of these clocks? That's going to be a massive amount of platform devices and they will completely mess up sysfs. Thierry
18.08.2021 17:07, Thierry Reding пишет: > On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: > [...] >> +struct clk *tegra_clk_register(struct clk_hw *hw) >> +{ >> + struct platform_device *pdev; >> + struct device *dev = NULL; >> + struct device_node *np; >> + const char *dev_name; >> + >> + np = tegra_clk_get_of_node(hw); >> + >> + if (!of_device_is_available(np)) >> + goto put_node; >> + >> + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); >> + if (!dev_name) >> + goto put_node; >> + >> + pdev = of_platform_device_create(np, dev_name, NULL); >> + if (!pdev) { >> + pr_err("%s: failed to create device for %pOF\n", __func__, np); >> + kfree(dev_name); >> + goto put_node; >> + } >> + >> + dev = &pdev->dev; >> + pm_runtime_enable(dev); >> +put_node: >> + of_node_put(np); >> + >> + return clk_register(dev, hw); >> +} > > This looks wrong. Why do we need struct platform_device objects for each > of these clocks? That's going to be a massive amount of platform devices > and they will completely mess up sysfs. RPM works with a device. It's not a massive amount of devices, it's one device for T20 and four devices for T30.
On Wed, Aug 18, 2021 at 06:05:21PM +0300, Dmitry Osipenko wrote: > 18.08.2021 17:07, Thierry Reding пишет: > > On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: > > [...] > >> +struct clk *tegra_clk_register(struct clk_hw *hw) > >> +{ > >> + struct platform_device *pdev; > >> + struct device *dev = NULL; > >> + struct device_node *np; > >> + const char *dev_name; > >> + > >> + np = tegra_clk_get_of_node(hw); > >> + > >> + if (!of_device_is_available(np)) > >> + goto put_node; > >> + > >> + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); > >> + if (!dev_name) > >> + goto put_node; > >> + > >> + pdev = of_platform_device_create(np, dev_name, NULL); > >> + if (!pdev) { > >> + pr_err("%s: failed to create device for %pOF\n", __func__, np); > >> + kfree(dev_name); > >> + goto put_node; > >> + } > >> + > >> + dev = &pdev->dev; > >> + pm_runtime_enable(dev); > >> +put_node: > >> + of_node_put(np); > >> + > >> + return clk_register(dev, hw); > >> +} > > > > This looks wrong. Why do we need struct platform_device objects for each > > of these clocks? That's going to be a massive amount of platform devices > > and they will completely mess up sysfs. > > RPM works with a device. It's not a massive amount of devices, it's one > device for T20 and four devices for T30. I'm still not sure I understand why we need to call RPM functions on a clock. And even if they are few, it seems wrong to make these platform devices. Perhaps they can be simple struct device:s instead? Ideally they would also be parented to the CAR so that they appear in the right place in the sysfs hierarchy. Thierry
18.08.2021 19:42, Thierry Reding пишет: > On Wed, Aug 18, 2021 at 06:05:21PM +0300, Dmitry Osipenko wrote: >> 18.08.2021 17:07, Thierry Reding пишет: >>> On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: >>> [...] >>>> +struct clk *tegra_clk_register(struct clk_hw *hw) >>>> +{ >>>> + struct platform_device *pdev; >>>> + struct device *dev = NULL; >>>> + struct device_node *np; >>>> + const char *dev_name; >>>> + >>>> + np = tegra_clk_get_of_node(hw); >>>> + >>>> + if (!of_device_is_available(np)) >>>> + goto put_node; >>>> + >>>> + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); >>>> + if (!dev_name) >>>> + goto put_node; >>>> + >>>> + pdev = of_platform_device_create(np, dev_name, NULL); >>>> + if (!pdev) { >>>> + pr_err("%s: failed to create device for %pOF\n", __func__, np); >>>> + kfree(dev_name); >>>> + goto put_node; >>>> + } >>>> + >>>> + dev = &pdev->dev; >>>> + pm_runtime_enable(dev); >>>> +put_node: >>>> + of_node_put(np); >>>> + >>>> + return clk_register(dev, hw); >>>> +} >>> >>> This looks wrong. Why do we need struct platform_device objects for each >>> of these clocks? That's going to be a massive amount of platform devices >>> and they will completely mess up sysfs. >> >> RPM works with a device. It's not a massive amount of devices, it's one >> device for T20 and four devices for T30. > > I'm still not sure I understand why we need to call RPM functions on a > clock. And even if they are few, it seems wrong to make these platform > devices. Before clock is enabled, we need to raise core voltage. After clock is disabled, the voltage should be dropped. CCF+RPM takes care of handling this for us. > Perhaps they can be simple struct device:s instead? Ideally they would > also be parented to the CAR so that they appear in the right place in > the sysfs hierarchy. Could you please clarify what do you mean by 'simple struct device:s'? These clock devices should be OF devices with a of_node and etc, otherwise we can't use OPP framework. We don't have driver for CAR to bind. I guess we could try to add a 'dummy' CAR driver that will create sub-devices for the rpm-clocks, is this what you're wanting?
On Wed, Aug 18, 2021 at 08:11:03PM +0300, Dmitry Osipenko wrote: > 18.08.2021 19:42, Thierry Reding пишет: > > On Wed, Aug 18, 2021 at 06:05:21PM +0300, Dmitry Osipenko wrote: > >> 18.08.2021 17:07, Thierry Reding пишет: > >>> On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: > >>> [...] > >>>> +struct clk *tegra_clk_register(struct clk_hw *hw) > >>>> +{ > >>>> + struct platform_device *pdev; > >>>> + struct device *dev = NULL; > >>>> + struct device_node *np; > >>>> + const char *dev_name; > >>>> + > >>>> + np = tegra_clk_get_of_node(hw); > >>>> + > >>>> + if (!of_device_is_available(np)) > >>>> + goto put_node; > >>>> + > >>>> + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); > >>>> + if (!dev_name) > >>>> + goto put_node; > >>>> + > >>>> + pdev = of_platform_device_create(np, dev_name, NULL); > >>>> + if (!pdev) { > >>>> + pr_err("%s: failed to create device for %pOF\n", __func__, np); > >>>> + kfree(dev_name); > >>>> + goto put_node; > >>>> + } > >>>> + > >>>> + dev = &pdev->dev; > >>>> + pm_runtime_enable(dev); > >>>> +put_node: > >>>> + of_node_put(np); > >>>> + > >>>> + return clk_register(dev, hw); > >>>> +} > >>> > >>> This looks wrong. Why do we need struct platform_device objects for each > >>> of these clocks? That's going to be a massive amount of platform devices > >>> and they will completely mess up sysfs. > >> > >> RPM works with a device. It's not a massive amount of devices, it's one > >> device for T20 and four devices for T30. > > > > I'm still not sure I understand why we need to call RPM functions on a > > clock. And even if they are few, it seems wrong to make these platform > > devices. > > Before clock is enabled, we need to raise core voltage. After clock is > disabled, the voltage should be dropped. CCF+RPM takes care of handling > this for us. That's the part that I do understand. What I don't understand is why a clock needs to be runtime suspend/resumed. Typically we suspend/resume devices, and doing so typically involves disabling/enabling clocks. So I don't understand why the clocks themselves now need to be runtime suspended/resumed. > > Perhaps they can be simple struct device:s instead? Ideally they would > > also be parented to the CAR so that they appear in the right place in > > the sysfs hierarchy. > > Could you please clarify what do you mean by 'simple struct device:s'? > These clock devices should be OF devices with a of_node and etc, > otherwise we can't use OPP framework. Perhaps I misunderstand the goal of the OPP framework. My understanding was that this was to attach a table of operating points with a device so that appropriate operating points could be selected and switched to when the workload changes. Typically these operating points would be roughly a clock rate and a corresponding voltage for a regulator, so that when a certain clock rate is requested, the regulator can be set to the matching voltage. Hm... so is it that each of these clocks that you want to create a platform device for has its own regulator? Because the patch series only mentions the CORE domain, so I assumed that we would accumulate all the clock rates for the clocks that are part of that CORE domain and then derive a voltage to be supplied to that CORE domain. But perhaps I just don't understand correctly how this is tied together. > We don't have driver for CAR to bind. I guess we could try to add a > 'dummy' CAR driver that will create sub-devices for the rpm-clocks, is > this what you're wanting? I got confused by the "tegra-clock" driver that this series was adding. This is actually a driver that will bind to the virtual clocks rather than the CAR device itself. For some reason I had assumed that you wanted to create a CAR driver in order to get at the struct device embedded in the CAR's platform device and use that as the parent for all these clocks. So even if we absolutely need some struct device for these clocks, maybe adding that CAR driver and making the clock struct device:s children of the CAR device will help keep a bit of a proper hierarchy in sysfs. Thierry
19.08.2021 19:54, Thierry Reding пишет: > On Wed, Aug 18, 2021 at 08:11:03PM +0300, Dmitry Osipenko wrote: >> 18.08.2021 19:42, Thierry Reding пишет: >>> On Wed, Aug 18, 2021 at 06:05:21PM +0300, Dmitry Osipenko wrote: >>>> 18.08.2021 17:07, Thierry Reding пишет: >>>>> On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: >>>>> [...] >>>>>> +struct clk *tegra_clk_register(struct clk_hw *hw) >>>>>> +{ >>>>>> + struct platform_device *pdev; >>>>>> + struct device *dev = NULL; >>>>>> + struct device_node *np; >>>>>> + const char *dev_name; >>>>>> + >>>>>> + np = tegra_clk_get_of_node(hw); >>>>>> + >>>>>> + if (!of_device_is_available(np)) >>>>>> + goto put_node; >>>>>> + >>>>>> + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); >>>>>> + if (!dev_name) >>>>>> + goto put_node; >>>>>> + >>>>>> + pdev = of_platform_device_create(np, dev_name, NULL); >>>>>> + if (!pdev) { >>>>>> + pr_err("%s: failed to create device for %pOF\n", __func__, np); >>>>>> + kfree(dev_name); >>>>>> + goto put_node; >>>>>> + } >>>>>> + >>>>>> + dev = &pdev->dev; >>>>>> + pm_runtime_enable(dev); >>>>>> +put_node: >>>>>> + of_node_put(np); >>>>>> + >>>>>> + return clk_register(dev, hw); >>>>>> +} >>>>> >>>>> This looks wrong. Why do we need struct platform_device objects for each >>>>> of these clocks? That's going to be a massive amount of platform devices >>>>> and they will completely mess up sysfs. >>>> >>>> RPM works with a device. It's not a massive amount of devices, it's one >>>> device for T20 and four devices for T30. >>> >>> I'm still not sure I understand why we need to call RPM functions on a >>> clock. And even if they are few, it seems wrong to make these platform >>> devices. >> >> Before clock is enabled, we need to raise core voltage. After clock is >> disabled, the voltage should be dropped. CCF+RPM takes care of handling >> this for us. > > That's the part that I do understand. What I don't understand is why a > clock needs to be runtime suspend/resumed. Typically we suspend/resume > devices, and doing so typically involves disabling/enabling clocks. So > I don't understand why the clocks themselves now need to be runtime > suspended/resumed. CCF provides RPM management for a device that backs clock. When clock is enabled, it resumes the backing device. RPM, GENPD and OPP frameworks work with a device. We use all these frameworks here. Since we don't have a dedicated device for a PLL clock, we need to create it in order to leverage the existing generic kernel APIs. In this case clocks are not runtime suspended/resumed, the device which backs clock is suspended/resumed. >>> Perhaps they can be simple struct device:s instead? Ideally they would >>> also be parented to the CAR so that they appear in the right place in >>> the sysfs hierarchy. >> >> Could you please clarify what do you mean by 'simple struct device:s'? >> These clock devices should be OF devices with a of_node and etc, >> otherwise we can't use OPP framework. > > Perhaps I misunderstand the goal of the OPP framework. My understanding > was that this was to attach a table of operating points with a device so > that appropriate operating points could be selected and switched to when > the workload changes. > > Typically these operating points would be roughly a clock rate and a > corresponding voltage for a regulator, so that when a certain clock rate > is requested, the regulator can be set to the matching voltage. > > Hm... so is it that each of these clocks that you want to create a > platform device for has its own regulator? Because the patch series only > mentions the CORE domain, so I assumed that we would accumulate all the > clock rates for the clocks that are part of that CORE domain and then > derive a voltage to be supplied to that CORE domain. > > But perhaps I just don't understand correctly how this is tied together. We don't use regulators, we use power domain that controls regulator. GENPD takes care of accumulating performance requests on a per-device basis. I'm creating platform device for the clocks that require DVFS. These clocks don't use regulator, they are attached to the CORE domain. GENPD framework manages the performance state, aggregating perf votes from each device, i.e. from each clock individually. You want to reinvent another layer of aggregation on top of GENPD. This doesn't worth the effort, we won't get anything from it, it should be a lot of extra complexity for nothing. We will also lose from it because pm_genpd_summary won't show you a per-device info. domain status children performance /device runtime status ---------------------------------------------------------------------------------------------- heg on 1000000 /devices/soc0/50000000.host1x active 1000000 /devices/soc0/50000000.host1x/54140000.gr2d suspended 0 mpe off-0 0 vdec off-0 0 /devices/soc0/6001a000.vde suspended 0 venc off-0 0 3d1 off-0 0 /devices/genpd:1:54180000.gr3d suspended 0 3d0 off-0 0 /devices/genpd:0:54180000.gr3d suspended 0 core-domain on 1000000 3d0, 3d1, venc, vdec, mpe, heg /devices/soc0/7d000000.usb active 1000000 /devices/soc0/78000400.mmc active 950000 /devices/soc0/7000f400.memory-controller unsupported 1000000 /devices/soc0/7000a000.pwm active 1000000 /devices/soc0/60006000.clock/tegra_clk_pll_c active 1000000 /devices/soc0/60006000.clock/tegra_clk_pll_e suspended 0 /devices/soc0/60006000.clock/tegra_clk_pll_m active 1000000 /devices/soc0/60006000.clock/tegra_clk_sclk active 1000000 >> We don't have driver for CAR to bind. I guess we could try to add a >> 'dummy' CAR driver that will create sub-devices for the rpm-clocks, is >> this what you're wanting? > > I got confused by the "tegra-clock" driver that this series was adding. > This is actually a driver that will bind to the virtual clocks rather > than the CAR device itself. > > For some reason I had assumed that you wanted to create a CAR driver in > order to get at the struct device embedded in the CAR's platform device > and use that as the parent for all these clocks. > > So even if we absolutely need some struct device for these clocks, maybe > adding that CAR driver and making the clock struct device:s children of > the CAR device will help keep a bit of a proper hierarchy in sysfs. Alright, that's easy to do. We will have to move out some clk data out of __init then. I already implemented it as you may see in the above PD summary.
On Fri, Aug 20, 2021 at 01:09:46AM +0300, Dmitry Osipenko wrote: > 19.08.2021 19:54, Thierry Reding пишет: > > On Wed, Aug 18, 2021 at 08:11:03PM +0300, Dmitry Osipenko wrote: > >> 18.08.2021 19:42, Thierry Reding пишет: > >>> On Wed, Aug 18, 2021 at 06:05:21PM +0300, Dmitry Osipenko wrote: > >>>> 18.08.2021 17:07, Thierry Reding пишет: > >>>>> On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote: > >>>>> [...] > >>>>>> +struct clk *tegra_clk_register(struct clk_hw *hw) > >>>>>> +{ > >>>>>> + struct platform_device *pdev; > >>>>>> + struct device *dev = NULL; > >>>>>> + struct device_node *np; > >>>>>> + const char *dev_name; > >>>>>> + > >>>>>> + np = tegra_clk_get_of_node(hw); > >>>>>> + > >>>>>> + if (!of_device_is_available(np)) > >>>>>> + goto put_node; > >>>>>> + > >>>>>> + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); > >>>>>> + if (!dev_name) > >>>>>> + goto put_node; > >>>>>> + > >>>>>> + pdev = of_platform_device_create(np, dev_name, NULL); > >>>>>> + if (!pdev) { > >>>>>> + pr_err("%s: failed to create device for %pOF\n", __func__, np); > >>>>>> + kfree(dev_name); > >>>>>> + goto put_node; > >>>>>> + } > >>>>>> + > >>>>>> + dev = &pdev->dev; > >>>>>> + pm_runtime_enable(dev); > >>>>>> +put_node: > >>>>>> + of_node_put(np); > >>>>>> + > >>>>>> + return clk_register(dev, hw); > >>>>>> +} > >>>>> > >>>>> This looks wrong. Why do we need struct platform_device objects for each > >>>>> of these clocks? That's going to be a massive amount of platform devices > >>>>> and they will completely mess up sysfs. > >>>> > >>>> RPM works with a device. It's not a massive amount of devices, it's one > >>>> device for T20 and four devices for T30. > >>> > >>> I'm still not sure I understand why we need to call RPM functions on a > >>> clock. And even if they are few, it seems wrong to make these platform > >>> devices. > >> > >> Before clock is enabled, we need to raise core voltage. After clock is > >> disabled, the voltage should be dropped. CCF+RPM takes care of handling > >> this for us. > > > > That's the part that I do understand. What I don't understand is why a > > clock needs to be runtime suspend/resumed. Typically we suspend/resume > > devices, and doing so typically involves disabling/enabling clocks. So > > I don't understand why the clocks themselves now need to be runtime > > suspended/resumed. > > CCF provides RPM management for a device that backs clock. When clock > is enabled, it resumes the backing device. > > RPM, GENPD and OPP frameworks work with a device. We use all these > frameworks here. Since we don't have a dedicated device for a PLL > clock, we need to create it in order to leverage the existing generic > kernel APIs. > > In this case clocks are not runtime suspended/resumed, the device > which backs clock is suspended/resumed. > > >>> Perhaps they can be simple struct device:s instead? Ideally they would > >>> also be parented to the CAR so that they appear in the right place in > >>> the sysfs hierarchy. > >> > >> Could you please clarify what do you mean by 'simple struct device:s'? > >> These clock devices should be OF devices with a of_node and etc, > >> otherwise we can't use OPP framework. > > > > Perhaps I misunderstand the goal of the OPP framework. My understanding > > was that this was to attach a table of operating points with a device so > > that appropriate operating points could be selected and switched to when > > the workload changes. > > > > Typically these operating points would be roughly a clock rate and a > > corresponding voltage for a regulator, so that when a certain clock rate > > is requested, the regulator can be set to the matching voltage. > > > > Hm... so is it that each of these clocks that you want to create a > > platform device for has its own regulator? Because the patch series only > > mentions the CORE domain, so I assumed that we would accumulate all the > > clock rates for the clocks that are part of that CORE domain and then > > derive a voltage to be supplied to that CORE domain. > > > > But perhaps I just don't understand correctly how this is tied together. > > We don't use regulators, we use power domain that controls regulator. > GENPD takes care of accumulating performance requests on a per-device > basis. > > I'm creating platform device for the clocks that require DVFS. These > clocks don't use regulator, they are attached to the CORE domain. > GENPD framework manages the performance state, aggregating perf votes > from each device, i.e. from each clock individually. > > You want to reinvent another layer of aggregation on top of GENPD. > This doesn't worth the effort, we won't get anything from it, it > should be a lot of extra complexity for nothing. We will also lose > from it because pm_genpd_summary won't show you a per-device info. > > domain status children performance > /device runtime status > ---------------------------------------------------------------------------------------------- > heg on 1000000 > /devices/soc0/50000000.host1x active 1000000 > /devices/soc0/50000000.host1x/54140000.gr2d suspended 0 > mpe off-0 0 > vdec off-0 0 > /devices/soc0/6001a000.vde suspended 0 > venc off-0 0 > 3d1 off-0 0 > /devices/genpd:1:54180000.gr3d suspended 0 > 3d0 off-0 0 > /devices/genpd:0:54180000.gr3d suspended 0 > core-domain on 1000000 > 3d0, 3d1, venc, vdec, mpe, heg > /devices/soc0/7d000000.usb active 1000000 > /devices/soc0/78000400.mmc active 950000 > /devices/soc0/7000f400.memory-controller unsupported 1000000 > /devices/soc0/7000a000.pwm active 1000000 > /devices/soc0/60006000.clock/tegra_clk_pll_c active 1000000 > /devices/soc0/60006000.clock/tegra_clk_pll_e suspended 0 > /devices/soc0/60006000.clock/tegra_clk_pll_m active 1000000 > /devices/soc0/60006000.clock/tegra_clk_sclk active 1000000 > I suppose if there's really no good way of doing this other than providing a struct device, then so be it. I think the cleaned up sysfs shown in the summary above looks much better than what the original would've looked like. Perhaps an additional tweak to that would be to not create platform devices. Instead, just create struct device. Those really have everything you need (.of_node, and can be used with RPM and GENPD). As I mentioned earlier, platform device implies a CPU-memory-mapped bus, which this clearly isn't. It's kind of a separate "bus" if you want, so just using struct device directly seems more appropriate. We did something similar for XUSB pads, see drivers/phy/tegra/xusb.[ch] for an example of how that was done. I think you can do something similar here. Thierry
[...] > > > > I'm creating platform device for the clocks that require DVFS. These > > clocks don't use regulator, they are attached to the CORE domain. > > GENPD framework manages the performance state, aggregating perf votes > > from each device, i.e. from each clock individually. > > > > You want to reinvent another layer of aggregation on top of GENPD. > > This doesn't worth the effort, we won't get anything from it, it > > should be a lot of extra complexity for nothing. We will also lose > > from it because pm_genpd_summary won't show you a per-device info. > > > > domain status children performance > > /device runtime status > > ---------------------------------------------------------------------------------------------- > > heg on 1000000 > > /devices/soc0/50000000.host1x active 1000000 > > /devices/soc0/50000000.host1x/54140000.gr2d suspended 0 > > mpe off-0 0 > > vdec off-0 0 > > /devices/soc0/6001a000.vde suspended 0 > > venc off-0 0 > > 3d1 off-0 0 > > /devices/genpd:1:54180000.gr3d suspended 0 > > 3d0 off-0 0 > > /devices/genpd:0:54180000.gr3d suspended 0 > > core-domain on 1000000 > > 3d0, 3d1, venc, vdec, mpe, heg > > /devices/soc0/7d000000.usb active 1000000 > > /devices/soc0/78000400.mmc active 950000 > > /devices/soc0/7000f400.memory-controller unsupported 1000000 > > /devices/soc0/7000a000.pwm active 1000000 > > /devices/soc0/60006000.clock/tegra_clk_pll_c active 1000000 > > /devices/soc0/60006000.clock/tegra_clk_pll_e suspended 0 > > /devices/soc0/60006000.clock/tegra_clk_pll_m active 1000000 > > /devices/soc0/60006000.clock/tegra_clk_sclk active 1000000 > > > > I suppose if there's really no good way of doing this other than > providing a struct device, then so be it. I think the cleaned up sysfs > shown in the summary above looks much better than what the original > would've looked like. > > Perhaps an additional tweak to that would be to not create platform > devices. Instead, just create struct device. Those really have > everything you need (.of_node, and can be used with RPM and GENPD). As I > mentioned earlier, platform device implies a CPU-memory-mapped bus, > which this clearly isn't. It's kind of a separate "bus" if you want, so > just using struct device directly seems more appropriate. Just a heads up. If you don't use a platform device or have a driver associated with it for probing, you need to manage the attachment to genpd yourself. That means calling one of the dev_pm_domain_attach*() APIs, but that's perfectly fine, ofcourse. > > We did something similar for XUSB pads, see drivers/phy/tegra/xusb.[ch] > for an example of how that was done. I think you can do something > similar here. > > Thierry Kind regards Uffe
20.08.2021 16:08, Ulf Hansson пишет: ... >> I suppose if there's really no good way of doing this other than >> providing a struct device, then so be it. I think the cleaned up sysfs >> shown in the summary above looks much better than what the original >> would've looked like. >> >> Perhaps an additional tweak to that would be to not create platform >> devices. Instead, just create struct device. Those really have >> everything you need (.of_node, and can be used with RPM and GENPD). As I >> mentioned earlier, platform device implies a CPU-memory-mapped bus, >> which this clearly isn't. It's kind of a separate "bus" if you want, so >> just using struct device directly seems more appropriate. > > Just a heads up. If you don't use a platform device or have a driver > associated with it for probing, you need to manage the attachment to > genpd yourself. That means calling one of the dev_pm_domain_attach*() > APIs, but that's perfectly fine, ofcourse. > >> >> We did something similar for XUSB pads, see drivers/phy/tegra/xusb.[ch] >> for an example of how that was done. I think you can do something >> similar here. We need a platform device because we have a platform device driver that must be bound to the device, otherwise PMC driver state won't be synced since it it's synced after all drivers of devices that reference PMC node in DT are probed.
On Sat, Aug 21, 2021 at 08:45:54PM +0300, Dmitry Osipenko wrote: > 20.08.2021 16:08, Ulf Hansson пишет: > ... > >> I suppose if there's really no good way of doing this other than > >> providing a struct device, then so be it. I think the cleaned up sysfs > >> shown in the summary above looks much better than what the original > >> would've looked like. > >> > >> Perhaps an additional tweak to that would be to not create platform > >> devices. Instead, just create struct device. Those really have > >> everything you need (.of_node, and can be used with RPM and GENPD). As I > >> mentioned earlier, platform device implies a CPU-memory-mapped bus, > >> which this clearly isn't. It's kind of a separate "bus" if you want, so > >> just using struct device directly seems more appropriate. > > > > Just a heads up. If you don't use a platform device or have a driver > > associated with it for probing, you need to manage the attachment to > > genpd yourself. That means calling one of the dev_pm_domain_attach*() > > APIs, but that's perfectly fine, ofcourse. > > > >> > >> We did something similar for XUSB pads, see drivers/phy/tegra/xusb.[ch] > >> for an example of how that was done. I think you can do something > >> similar here. > > We need a platform device because we have a platform device driver that > must be bound to the device, otherwise PMC driver state won't be synced > since it it's synced after all drivers of devices that reference PMC > node in DT are probed. I think the causality is the wrong way around. It's more likely that you added the platform driver because you have a platform device that you want to bind against. You can have drivers bind to other types of devices, although it's a bit more work than abusing platform devices for it. There's the "auxiliary" bus that seems like it would be a somewhat better fit (see Documentation/driver-api/auxiliary_bus.rst), though it doesn't look like this fits the purpose exactly. I think a custom bus (or perhaps something that could be deployed more broadly across CCF) would be more appropriate. Looking around, it seems like clk/imx and clk/samsung abuse the platform bus in a similar way, so they would benefit from a "clk" bus as well. Thierry
23.08.2021 17:33, Thierry Reding пишет: > On Sat, Aug 21, 2021 at 08:45:54PM +0300, Dmitry Osipenko wrote: >> 20.08.2021 16:08, Ulf Hansson пишет: >> ... >>>> I suppose if there's really no good way of doing this other than >>>> providing a struct device, then so be it. I think the cleaned up sysfs >>>> shown in the summary above looks much better than what the original >>>> would've looked like. >>>> >>>> Perhaps an additional tweak to that would be to not create platform >>>> devices. Instead, just create struct device. Those really have >>>> everything you need (.of_node, and can be used with RPM and GENPD). As I >>>> mentioned earlier, platform device implies a CPU-memory-mapped bus, >>>> which this clearly isn't. It's kind of a separate "bus" if you want, so >>>> just using struct device directly seems more appropriate. >>> >>> Just a heads up. If you don't use a platform device or have a driver >>> associated with it for probing, you need to manage the attachment to >>> genpd yourself. That means calling one of the dev_pm_domain_attach*() >>> APIs, but that's perfectly fine, ofcourse. >>> >>>> >>>> We did something similar for XUSB pads, see drivers/phy/tegra/xusb.[ch] >>>> for an example of how that was done. I think you can do something >>>> similar here. >> >> We need a platform device because we have a platform device driver that >> must be bound to the device, otherwise PMC driver state won't be synced >> since it it's synced after all drivers of devices that reference PMC >> node in DT are probed. > > I think the causality is the wrong way around. It's more likely that you > added the platform driver because you have a platform device that you > want to bind against. > > You can have drivers bind to other types of devices, although it's a bit > more work than abusing platform devices for it. > > There's the "auxiliary" bus that seems like it would be a somewhat > better fit (see Documentation/driver-api/auxiliary_bus.rst), though it > doesn't look like this fits the purpose exactly. I think a custom bus > (or perhaps something that could be deployed more broadly across CCF) > would be more appropriate. > > Looking around, it seems like clk/imx and clk/samsung abuse the platform > bus in a similar way, so they would benefit from a "clk" bus as well. It may be nice to have a dedicated clk bus, but this is too much effort for nearly nothing in our case. It shouldn't be a problem to convert drivers to use clk bus once it will be implemented. It shouldn't be a part of this series, IMO.
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index 7b1816856eb5..a0715cdfc1a4 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += clk.o obj-y += clk-audio-sync.o +obj-y += clk-device.o obj-y += clk-dfll.o obj-y += clk-divider.o obj-y += clk-periph.o diff --git a/drivers/clk/tegra/clk-device.c b/drivers/clk/tegra/clk-device.c new file mode 100644 index 000000000000..1399eaba1c91 --- /dev/null +++ b/drivers/clk/tegra/clk-device.c @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +#include <soc/tegra/common.h> + +#include "clk.h" + +/* + * This driver manages performance state of the core power domain for the + * independent PLLs and system clocks. We created a virtual clock device + * for such clocks, see tegra_clk_register(). + */ + +struct tegra_clk_device { + struct notifier_block clk_nb; + struct device *dev; + struct clk_hw *hw; + struct mutex lock; +}; + +static int tegra_clock_set_pd_state(struct tegra_clk_device *clk_dev, + unsigned long rate) +{ + struct device *dev = clk_dev->dev; + struct dev_pm_opp *opp; + unsigned int pstate; + + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (opp == ERR_PTR(-ERANGE)) { + dev_dbg(dev, "failed to find ceil OPP for %luHz\n", rate); + opp = dev_pm_opp_find_freq_floor(dev, &rate); + } + + if (IS_ERR(opp)) { + dev_err(dev, "failed to find OPP for %luHz: %pe\n", rate, opp); + return PTR_ERR(opp); + } + + pstate = dev_pm_opp_get_required_pstate(opp, 0); + dev_pm_opp_put(opp); + + return dev_pm_genpd_set_performance_state(dev, pstate); +} + +static int tegra_clock_change_notify(struct notifier_block *nb, + unsigned long msg, void *data) +{ + struct clk_notifier_data *cnd = data; + struct tegra_clk_device *clk_dev; + int err = 0; + + clk_dev = container_of(nb, struct tegra_clk_device, clk_nb); + + mutex_lock(&clk_dev->lock); + switch (msg) { + case PRE_RATE_CHANGE: + if (cnd->new_rate > cnd->old_rate) + err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate); + break; + + case ABORT_RATE_CHANGE: + err = tegra_clock_set_pd_state(clk_dev, cnd->old_rate); + break; + + case POST_RATE_CHANGE: + if (cnd->new_rate < cnd->old_rate) + err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate); + break; + + default: + break; + } + mutex_unlock(&clk_dev->lock); + + return notifier_from_errno(err); +} + +static int tegra_clock_sync_pd_state(struct tegra_clk_device *clk_dev) +{ + unsigned long rate; + int ret = 0; + + mutex_lock(&clk_dev->lock); + + if (!pm_runtime_status_suspended(clk_dev->dev)) { + rate = clk_hw_get_rate(clk_dev->hw); + ret = tegra_clock_set_pd_state(clk_dev, rate); + } + + mutex_unlock(&clk_dev->lock); + + return ret; +} + +static int tegra_clock_probe(struct platform_device *pdev) +{ + struct tegra_clk_device *clk_dev; + struct device *dev = &pdev->dev; + struct clk *clk; + int err; + + if (!dev->pm_domain) + return -EINVAL; + + clk_dev = devm_kzalloc(dev, sizeof(*clk_dev), GFP_KERNEL); + if (!clk_dev) + return -ENOMEM; + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_dev->dev = dev; + clk_dev->hw = __clk_get_hw(clk); + clk_dev->clk_nb.notifier_call = tegra_clock_change_notify; + mutex_init(&clk_dev->lock); + + platform_set_drvdata(pdev, clk_dev); + + err = devm_tegra_core_dev_init_opp_table_simple(dev); + if (err) + return err; + + err = clk_notifier_register(clk, &clk_dev->clk_nb); + if (err) { + dev_err(dev, "failed to register clk notifier: %d\n", err); + return err; + } + + /* + * The driver is attaching to a potentially active/resumed clock, hence + * we need to sync the power domain performance state in a accordance to + * the clock rate if clock is resumed. + */ + err = tegra_clock_sync_pd_state(clk_dev); + if (err) + goto unreg_clk; + + return 0; + +unreg_clk: + clk_notifier_unregister(clk, &clk_dev->clk_nb); + + return err; +} + +static __maybe_unused int tegra_clock_pm_suspend(struct device *dev) +{ + struct tegra_clk_device *clk_dev = dev_get_drvdata(dev); + + /* + * Power management of the clock is entangled with the Tegra PMC + * GENPD because PMC driver enables/disables clocks for toggling + * of the PD's on/off state. + * + * The PMC GENPD is resumed in NOIRQ phase, before RPM of the clocks + * becomes available, hence PMC can't use clocks at the early resume + * phase if RPM is involved. For example when 3d clock is enabled, + * it may enable the parent PLL clock that needs to be RPM-resumed. + * + * Secondly, the PLL clocks may be enabled by the low level suspend + * code, so we need to assume that PLL is in enabled state during + * suspend. + * + * We will keep PLLs and system clock resumed during suspend time. + * All PLLs on all SoCs are low power and system clock is always-on, + * so practically not much is changed here. + */ + + return clk_prepare(clk_dev->hw->clk); +} + +static __maybe_unused int tegra_clock_pm_resume(struct device *dev) +{ + struct tegra_clk_device *clk_dev = dev_get_drvdata(dev); + + clk_unprepare(clk_dev->hw->clk); + + return 0; +} + +static void tegra_clock_shutdown(struct platform_device *pdev) +{ + struct tegra_clk_device *clk_dev = platform_get_drvdata(pdev); + + clk_prepare(clk_dev->hw->clk); +} + +static const struct dev_pm_ops tegra_clock_pm = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_clock_pm_suspend, + tegra_clock_pm_resume) +}; + +static const struct of_device_id tegra_clock_match[] = { + { .compatible = "nvidia,tegra20-sclk" }, + { .compatible = "nvidia,tegra30-sclk" }, + { .compatible = "nvidia,tegra30-pllc" }, + { .compatible = "nvidia,tegra30-plle" }, + { .compatible = "nvidia,tegra30-pllm" }, + { } +}; + +static struct platform_driver tegra_clock_driver = { + .driver = { + .name = "tegra-clock", + .of_match_table = tegra_clock_match, + .pm = &tegra_clock_pm, + .suppress_bind_attrs = true, + }, + .probe = tegra_clock_probe, + .shutdown = tegra_clock_shutdown, +}; +builtin_platform_driver(tegra_clock_driver); diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index eaa079c177c3..131efc53659d 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1914,7 +1914,7 @@ static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll, /* Data in .init is copied by clk_register(), so stack variable OK */ pll->hw.init = &init; - return clk_register(NULL, &pll->hw); + return tegra_clk_register(&pll->hw); } struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c index 6099c6e9acd4..d1af4817051e 100644 --- a/drivers/clk/tegra/clk-super.c +++ b/drivers/clk/tegra/clk-super.c @@ -226,7 +226,7 @@ struct clk *tegra_clk_register_super_mux(const char *name, /* Data in .init is copied by clk_register(), so stack variable OK */ super->hw.init = &init; - clk = clk_register(NULL, &super->hw); + clk = tegra_clk_register(&super->hw); if (IS_ERR(clk)) kfree(super); diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 3664593a5ba4..cf92c0f4db61 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -710,13 +710,6 @@ static void tegra20_super_clk_init(void) NULL); clks[TEGRA20_CLK_CCLK] = clk; - /* SCLK */ - clk = tegra_clk_register_super_mux("sclk", sclk_parents, - ARRAY_SIZE(sclk_parents), - CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL); - clks[TEGRA20_CLK_SCLK] = clk; - /* twd */ clk = clk_register_fixed_factor(NULL, "twd", "cclk", 0, 1, 4); clks[TEGRA20_CLK_TWD] = clk; @@ -1146,13 +1139,39 @@ static void __init tegra20_clock_init(struct device_node *np) tegra20_periph_clk_init(); tegra20_audio_clk_init(); - tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX); - tegra_add_of_provider(np, tegra20_clk_src_onecell_get); - tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); tegra_clk_apply_init_table = tegra20_clock_apply_init_table; tegra_cpu_car_ops = &tegra20_cpu_car_ops; } CLK_OF_DECLARE(tegra20, "nvidia,tegra20-car", tegra20_clock_init); + +/* + * Clocks that use runtime PM can't be created at the CLK_OF_DECLARE + * stage because drivers base isn't initialized yet, and thus platform + * devices can't be created for the clocks. Hence we need to split the + * registration of the clocks into two phases. The first phase registers + * essential clocks which don't require RPM and are actually used during + * early boot. The second phase registers clocks which use RPM and this + * is done when device drivers core API is ready. + */ +static int __init tegra20_init_runtime_pm_clocks(void) +{ + struct clk *clk; + + if (!of_machine_is_compatible("nvidia,tegra20")) + return 0; + + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL); + clks[TEGRA20_CLK_SCLK] = clk; + + tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX); + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + + return 0; +} +postcore_initcall_sync(tegra20_init_runtime_pm_clocks); diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 64121bc66d85..a8ca313f3c6f 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -812,11 +812,6 @@ static void __init tegra30_pll_init(void) { struct clk *clk; - /* PLLC */ - clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0, - &pll_c_params, NULL); - clks[TEGRA30_CLK_PLL_C] = clk; - /* PLLC_OUT1 */ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, @@ -826,11 +821,6 @@ static void __init tegra30_pll_init(void) 0, NULL); clks[TEGRA30_CLK_PLL_C_OUT1] = clk; - /* PLLM */ - clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base, - CLK_SET_RATE_GATE, &pll_m_params, NULL); - clks[TEGRA30_CLK_PLL_M] = clk; - /* PLLM_OUT1 */ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m", clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP, @@ -880,9 +870,6 @@ static void __init tegra30_pll_init(void) ARRAY_SIZE(pll_e_parents), CLK_SET_RATE_NO_REPARENT, clk_base + PLLE_AUX, 2, 1, 0, NULL); - clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base, - CLK_GET_RATE_NOCACHE, &pll_e_params, NULL); - clks[TEGRA30_CLK_PLL_E] = clk; } static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", @@ -971,14 +958,6 @@ static void __init tegra30_super_clk_init(void) NULL); clks[TEGRA30_CLK_CCLK_LP] = clk; - /* SCLK */ - clk = tegra_clk_register_super_mux("sclk", sclk_parents, - ARRAY_SIZE(sclk_parents), - CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - clk_base + SCLK_BURST_POLICY, - 0, 4, 0, 0, NULL); - clks[TEGRA30_CLK_SCLK] = clk; - /* twd */ clk = clk_register_fixed_factor(NULL, "twd", "cclk_g", CLK_SET_RATE_PARENT, 1, 2); @@ -1354,13 +1333,56 @@ static void __init tegra30_clock_init(struct device_node *np) tegra30_audio_plls, ARRAY_SIZE(tegra30_audio_plls), 24000000); - tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX); - tegra_add_of_provider(np, tegra30_clk_src_onecell_get); - tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); tegra_clk_apply_init_table = tegra30_clock_apply_init_table; tegra_cpu_car_ops = &tegra30_cpu_car_ops; } CLK_OF_DECLARE(tegra30, "nvidia,tegra30-car", tegra30_clock_init); + +/* + * Clocks that use runtime PM can't be created at the CLK_OF_DECLARE + * stage because drivers base isn't initialized yet, and thus platform + * devices can't be created for the clocks. Hence we need to split the + * registration of the clocks into two phases. The first phase registers + * essential clocks which don't require RPM and are actually used during + * early boot. The second phase registers clocks which use RPM and this + * is done when device drivers core API is ready. + */ +static int __init tegra30_init_runtime_pm_clocks(void) +{ + struct clk *clk; + + if (!of_machine_is_compatible("nvidia,tegra30")) + return 0; + + /* PLLC */ + clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0, + &pll_c_params, NULL); + clks[TEGRA30_CLK_PLL_C] = clk; + + /* PLLE */ + clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base, + CLK_GET_RATE_NOCACHE, &pll_e_params, NULL); + clks[TEGRA30_CLK_PLL_E] = clk; + + /* PLLM */ + clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base, + CLK_SET_RATE_GATE, &pll_m_params, NULL); + clks[TEGRA30_CLK_PLL_M] = clk; + + /* SCLK */ + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + clk_base + SCLK_BURST_POLICY, + 0, 4, 0, 0, NULL); + clks[TEGRA30_CLK_SCLK] = clk; + + tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX); + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + + return 0; +} +postcore_initcall_sync(tegra30_init_runtime_pm_clocks); diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index f6cdce441cf7..868949b723c8 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -9,14 +9,19 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/clk/tegra.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/reset-controller.h> +#include <linux/string.h> #include <soc/tegra/fuse.h> #include "clk.h" /* Global data of Tegra CPU CAR ops */ +static struct device_node *tegra_car_np; static struct tegra_cpu_car_ops dummy_car_ops; struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops; @@ -320,6 +325,8 @@ void __init tegra_add_of_provider(struct device_node *np, { int i; + tegra_car_np = np; + for (i = 0; i < clk_num; i++) { if (IS_ERR(clks[i])) { pr_err @@ -372,6 +379,63 @@ struct clk ** __init tegra_lookup_dt_id(int clk_id, return NULL; } +static struct device_node *tegra_clk_get_of_node(struct clk_hw *hw) +{ + struct device_node *np, *root; + + if (!tegra_car_np) + return NULL; + + root = of_get_child_by_name(tegra_car_np, "tegra-clocks"); + if (!root) + return NULL; + + for_each_child_of_node(root, np) { + if (strcmp(np->name, hw->init->name)) + continue; + + if (!of_device_is_compatible(np, "nvidia,tegra-clock")) + continue; + + return np; + } + + of_node_put(root); + + return NULL; +} + +struct clk *tegra_clk_register(struct clk_hw *hw) +{ + struct platform_device *pdev; + struct device *dev = NULL; + struct device_node *np; + const char *dev_name; + + np = tegra_clk_get_of_node(hw); + + if (!of_device_is_available(np)) + goto put_node; + + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); + if (!dev_name) + goto put_node; + + pdev = of_platform_device_create(np, dev_name, NULL); + if (!pdev) { + pr_err("%s: failed to create device for %pOF\n", __func__, np); + kfree(dev_name); + goto put_node; + } + + dev = &pdev->dev; + pm_runtime_enable(dev); +put_node: + of_node_put(np); + + return clk_register(dev, hw); +} + tegra_clk_apply_init_table_func tegra_clk_apply_init_table; static int __init tegra_clocks_apply_init_table(void) diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 0c3ba0ccce1a..4fab4aa9fa31 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -927,4 +927,6 @@ struct clk *tegra20_clk_register_emc(void __iomem *ioaddr, bool low_jitter); struct clk *tegra210_clk_register_emc(struct device_node *np, void __iomem *regs); +struct clk *tegra_clk_register(struct clk_hw *hw); + #endif /* TEGRA_CLK_H */