diff mbox series

[RESEND] wcn36xx: Allow firmware name to be overridden by DT

Message ID 20210824171225.686683-1-bjorn.andersson@linaro.org (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series [RESEND] wcn36xx: Allow firmware name to be overridden by DT | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Bjorn Andersson Aug. 24, 2021, 5:12 p.m. UTC
The WLAN NV firmware blob differs between platforms, and possibly
devices, so add support in the wcn36xx driver for reading the path of
this file from DT in order to allow these files to live in a generic
file system (or linux-firmware).

For some reason the parent (wcnss_ctrl) also needs to upload this blob,
so rather than specifying the same information in both nodes wcn36xx
reads the string from the parent's of_node.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
---

This was previously part of a series spanning multiple subsystems, picked up
tested-bys and resending alone in hope that it can be merged.

https://lore.kernel.org/linux-arm-msm/20210312003318.3273536-3-bjorn.andersson@linaro.org/

 drivers/net/wireless/ath/wcn36xx/main.c    | 7 +++++++
 drivers/net/wireless/ath/wcn36xx/smd.c     | 4 ++--
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
 3 files changed, 10 insertions(+), 2 deletions(-)

Comments

Kalle Valo Aug. 27, 2021, 12:53 p.m. UTC | #1
Bjorn Andersson <bjorn.andersson@linaro.org> writes:

> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcn36xx driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
>
> For some reason the parent (wcnss_ctrl) also needs to upload this blob,
> so rather than specifying the same information in both nodes wcn36xx
> reads the string from the parent's of_node.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Tested-by: Aníbal Limón <anibal.limon@linaro.org>

[...]

> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1500,6 +1500,13 @@ static int wcn36xx_probe(struct platform_device *pdev)
>  		goto out_wq;
>  	}
>  
> +	wcn->nv_file = WLAN_NV_FILE;
> +	ret = of_property_read_string(wcn->dev->parent->of_node, "firmware-name", &wcn->nv_file);
> +	if (ret < 0 && ret != -EINVAL) {
> +		wcn36xx_err("failed to read \"firmware-name\" property\n");

I included the value of ret to the error print to ease debugging.
Modified patch is soon in the pending branch, please take a look.
Kalle Valo Aug. 29, 2021, 7:11 a.m. UTC | #2
Bjorn Andersson <bjorn.andersson@linaro.org> wrote:

> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcn36xx driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
> 
> For some reason the parent (wcnss_ctrl) also needs to upload this blob,
> so rather than specifying the same information in both nodes wcn36xx
> reads the string from the parent's of_node.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Tested-by: Aníbal Limón <anibal.limon@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

b7f96d5c79cd wcn36xx: Allow firmware name to be overridden by DT
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index d202f2128df2..2ccf7a8924a0 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1500,6 +1500,13 @@  static int wcn36xx_probe(struct platform_device *pdev)
 		goto out_wq;
 	}
 
+	wcn->nv_file = WLAN_NV_FILE;
+	ret = of_property_read_string(wcn->dev->parent->of_node, "firmware-name", &wcn->nv_file);
+	if (ret < 0 && ret != -EINVAL) {
+		wcn36xx_err("failed to read \"firmware-name\" property\n");
+		goto out_wq;
+	}
+
 	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
 	if (IS_ERR(wcn->smd_channel)) {
 		wcn36xx_err("failed to open WLAN_CTRL channel\n");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 0e3be17d8cea..57fa857b290b 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -504,10 +504,10 @@  int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
 	u16 fm_offset = 0;
 
 	if (!wcn->nv) {
-		ret = request_firmware(&wcn->nv, WLAN_NV_FILE, wcn->dev);
+		ret = request_firmware(&wcn->nv, wcn->nv_file, wcn->dev);
 		if (ret) {
 			wcn36xx_err("Failed to load nv file %s: %d\n",
-				      WLAN_NV_FILE, ret);
+				    wcn->nv_file, ret);
 			goto out;
 		}
 	}
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 6121d8a5641a..a69cce883563 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -199,6 +199,7 @@  struct wcn36xx {
 	struct device		*dev;
 	struct list_head	vif_list;
 
+	const char		*nv_file;
 	const struct firmware	*nv;
 
 	u8			fw_revision;