diff mbox series

[v6,13/15] dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192

Message ID 20210901083215.25984-14-yunfei.dong@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Using component framework to support multi hardware decode | expand

Commit Message

Yunfei Dong Sept. 1, 2021, 8:32 a.m. UTC 
Adds decoder dt-bindings for mt8192.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
---
v6: add decoder block diagram for Laurent's comments.

This patch depends on "Mediatek MT8192 clock support"[1].

The definition of decoder clocks are in mt8192-clk.h, and this patch already in clk tree[1].

[1]https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/commit/?h=clk-next&id=f35f1a23e0e12e3173e9e9dedbc150d139027189
---
 .../media/mediatek,vcodec-comp-decoder.yaml   | 192 ++++++++++++++++++
 1 file changed, 192 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml

Comments

Rob Herring (Arm) Sept. 2, 2021, 12:03 p.m. UTC | #1 
On Wed, 01 Sep 2021 16:32:13 +0800, Yunfei Dong wrote:
> Adds decoder dt-bindings for mt8192.
> 
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> ---
> v6: add decoder block diagram for Laurent's comments.
> 
> This patch depends on "Mediatek MT8192 clock support"[1].
> 
> The definition of decoder clocks are in mt8192-clk.h, and this patch already in clk tree[1].
> 
> [1]https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/commit/?h=clk-next&id=f35f1a23e0e12e3173e9e9dedbc150d139027189
> ---
>  .../media/mediatek,vcodec-comp-decoder.yaml   | 192 ++++++++++++++++++
>  1 file changed, 192 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml: properties:compatible: [{'enum': ['mediatek,mt8192-vcodec-dec', 'mediatek,mtk-vcodec-lat', 'mediatek,mtk-vcodec-core']}] is not of type 'object', 'boolean'
	from schema $id: http://json-schema.org/draft-07/schema#
./Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/media/mediatek,vcodec-comp-decoder.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml: ignoring, error in schema: properties: compatible
warning: no schema found in file: ./Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml
Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.example.dts:22:18: fatal error: dt-bindings/clock/mt8192-clk.h: No such file or directory
   22 |         #include <dt-bindings/clock/mt8192-clk.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1419: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1522931

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml
new file mode 100644
index 000000000000..2184cf7ef9e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml
@@ -0,0 +1,192 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/mediatek,vcodec-comp-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator With Component
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities. Required
+  master and component node.
+
+  About the Decoder Hardware Block Diagram, please check below:
+
+    +---------------------------------+------------------------------------+
+    |                                 |                                    |
+    | input -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output |
+    |            ||                   |                     ||             |
+    +------------||-------------------+---------------------||-------------+
+                 ||       lat thread  |  core thread        ||     <master>
+    -------------||-----------------------------------------||----------------
+                 ||                                         ||     <component>
+                 \/ <----------------HW index-------------->\/
+           +------------------------------------------------------+
+           |                    enable/disable                    |
+           |           clk     power    irq    iommu port         |
+           |                 (lat/lat soc/core0/core1)            |
+           +------------------------------------------------------+
+
+  As above, <master> mean in master device, <component> mean in component device.
+  The information of each hardware will be stored in each component device. There
+  are two thread in master device: lat and core. Enable/disable the lat clk/power/irq
+  when lat hardware need to work through hardware index, core is the same.
+
+  Normally the smi common may not the same for each hardware, can't combine all
+  hardware in one node, or leading to iommu fault when access dram data.
+
+properties:
+  compatible:
+      - enum:
+          - mediatek,mt8192-vcodec-dec  # for lat hardware
+          - mediatek,mtk-vcodec-lat     # for core hardware
+          - mediatek,mtk-vcodec-core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: vdec-sel
+      - const: vdec-soc-vdec
+      - const: vdec-soc-lat
+      - const: vdec-vdec
+      - const: vdec-top
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
+    description:
+      Describes point to scp.
+
+required:
+      - compatible
+      - reg
+      - iommus
+      - dma-ranges
+
+allOf:
+  - if: #master node
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8192-vcodec-dec  # for lat hardware
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if: #component node
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mtk-vcodec-lat     # for core hardware
+              - mediatek,mtk-vcodec-core
+
+    then:
+      required:
+        - interrupts
+        - clocks
+        - clock-names
+        - assigned-clocks
+        - assigned-clock-parents
+        - power-domains
+
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8192-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+
+    vcodec_dec: vcodec_dec@16000000 {
+        compatible = "mediatek,mt8192-vcodec-dec";
+        reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+        mediatek,scp = <&scp>;
+        iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+        dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+    };
+
+    vcodec_lat: vcodec_lat@0x16010000 {
+        compatible = "mediatek,mtk-vcodec-lat";
+        reg = <0 0x16010000 0 0x800>;		/* VDEC_MISC */
+        interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+        iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+             <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+        dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+        clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+             <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+             <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+             <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+             <&topckgen CLK_TOP_MAINPLL_D4>;
+        clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat",
+              "vdec-vdec", "vdec-top";
+        assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+        power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+    };
+
+    vcodec_core: vcodec_core@0x16025000 {
+        compatible = "mediatek,mtk-vcodec-core";
+        reg = <0 0x16025000 0 0x1000>;		/* VDEC_CORE_MISC */
+        interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+        iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+             <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+        dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+        clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+             <&vdecsys CLK_VDEC_VDEC>,
+             <&vdecsys CLK_VDEC_LAT>,
+             <&vdecsys CLK_VDEC_LARB1>,
+             <&topckgen CLK_TOP_MAINPLL_D4>;
+        clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat",
+              "vdec-vdec", "vdec-top";
+        assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+        power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+    };