diff mbox series

[v5,02/15] dt-bindings: iio: adc: Add ast2600-adc bindings

Message ID 20210831071458.2334-3-billy_tsai@aspeedtech.com (mailing list archive)
State New, archived
Headers show
Series Add support for ast2600 ADC | expand

Commit Message

Billy Tsai Aug. 31, 2021, 7:14 a.m. UTC 
Add device tree bindings document for the aspeed ast2600 adc device
driver.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 .../bindings/iio/adc/aspeed,ast2600-adc.yaml  | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml

Comments

Rob Herring (Arm) Sept. 1, 2021, 1:38 a.m. UTC | #1 
On Tue, 31 Aug 2021 15:14:45 +0800, Billy Tsai wrote:
> Add device tree bindings document for the aspeed ast2600 adc device
> driver.
> 
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> ---
>  .../bindings/iio/adc/aspeed,ast2600-adc.yaml  | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Jonathan Cameron Sept. 5, 2021, 2:27 p.m. UTC | #2 
On Tue, 31 Aug 2021 20:38:36 -0500
Rob Herring <robh@kernel.org> wrote:

> On Tue, 31 Aug 2021 15:14:45 +0800, Billy Tsai wrote:
> > Add device tree bindings document for the aspeed ast2600 adc device
> > driver.
> > 
> > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> > ---
> >  .../bindings/iio/adc/aspeed,ast2600-adc.yaml  | 100 ++++++++++++++++++
> >  1 file changed, 100 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
> >   
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

I'm going to push on with this series until I hit anything that needs to wait
for the fix to be available.  If that happens I'll have to wait until that's
in Linus' tree before taking the rest.

Applied to the togreg branch of iio.git and pushed out as testing for 0-day
to work it's magic.

Thanks,

Jonathan
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
new file mode 100644
index 000000000000..b283c8ca2bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -0,0 +1,100 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  • 10-bits resolution for 16 voltage channels.
+  • The device split into two individual engine and each contains 8 voltage
+  channels.
+  • Channel scanning can be non-continuous.
+  • Programmable ADC clock frequency.
+  • Programmable upper and lower threshold for each channels.
+  • Interrupt when larger or less than threshold for each channels.
+  • Support hysteresis for each channels.
+  • Built-in a compensating method.
+  • Built-in a register to trim internal reference voltage.
+  • Internal or External reference voltage.
+  • Support 2 Internal reference voltage 1.2v or 2.5v.
+  • Integrate dividing circuit for battery sensing.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-adc0
+      - aspeed,ast2600-adc1
+    description:
+      Their trimming data, which is used to calibrate internal reference volage,
+      locates in different address of OTP.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description:
+      The external regulator supply ADC reference voltage.
+
+  aspeed,int-vref-microvolt:
+    enum: [1200000, 2500000]
+    description:
+      ADC internal reference voltage in microvolts.
+
+  aspeed,battery-sensing:
+    type: boolean
+    description:
+      Inform the driver that last channel will be used to sensor battery.
+
+  aspeed,trim-data-valid:
+    type: boolean
+    description: |
+      The ADC reference voltage can be calibrated to obtain the trimming
+      data which will be stored in otp. This property informs the driver that
+      the data store in the otp is valid.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    adc0: adc@1e6e9000 {
+        compatible = "aspeed,ast2600-adc0";
+        reg = <0x1e6e9000 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+    adc1: adc@1e6e9100 {
+        compatible = "aspeed,ast2600-adc1";
+        reg = <0x1e6e9100 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+...