| Message ID | 1631643550-29960-5-git-send-email-pmaliset@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add DT bindings and DT nodes for PCIe and PHY in SC7280 | expand |
On Tue, Sep 14, 2021 at 11:49:10PM +0530, Prasad Malisetty wrote: > On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src > must be the TCXO while gdsc is enabled. After PHY init successful > clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. > > Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> > --- > drivers/pci/controller/dwc/pcie-qcom.c | 90 +++++++++++++++++++++++++++++----- > 1 file changed, 79 insertions(+), 11 deletions(-) > > +struct qcom_pcie_cfg { > + const struct qcom_pcie_ops *ops; > + bool pcie_1_pipe_clk_src_switch; This is OK, but all things being equal I like "unsigned int x:1" a little better. Here's some background: https://lore.kernel.org/r/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com/ https://lore.kernel.org/r/CA+55aFxnePDimkVKVtv3gNmRGcwc8KQ5mHYvUxY8sAQg6yvVYg@mail.gmail.com/ > @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) > struct pcie_port *pp; > struct dw_pcie *pci; > struct qcom_pcie *pcie; > + const struct qcom_pcie_cfg *pcie_cfg = NULL; No need to initialize this, since you always assign it before using it. > int ret; > > pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); > @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct platform_device *pdev) > > pcie->pci = pci; > > - pcie->ops = of_device_get_match_data(dev); > + pcie_cfg = of_device_get_match_data(dev); > + pcie->ops = pcie_cfg->ops; > + pcie->pcie_1_pipe_clk_src_switch = pcie_cfg->pcie_1_pipe_clk_src_switch; > > pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); > if (IS_ERR(pcie->reset)) { Looks good, thanks for working on this!
On Tue 14 Sep 11:19 PDT 2021, Prasad Malisetty wrote: > On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src > must be the TCXO while gdsc is enabled. After PHY init successful > clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. > > Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> > --- > drivers/pci/controller/dwc/pcie-qcom.c | 90 +++++++++++++++++++++++++++++----- > 1 file changed, 79 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 8a7a300..380c962 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 { > struct regulator_bulk_data supplies[2]; > struct reset_control *pci_reset; > struct clk *pipe_clk; > + struct clk *gcc_pcie_1_pipe_clk_src; Afaict you have both 2 PCIe controllers on sc7280, so I think it seems more reasonable to shorted this to "pipe_clk_src". > + struct clk *phy_pipe_clk; > + struct clk *ref_clk_src; > }; > > union qcom_pcie_resources { > @@ -189,6 +192,11 @@ struct qcom_pcie_ops { > int (*config_sid)(struct qcom_pcie *pcie); > }; > > +struct qcom_pcie_cfg { > + const struct qcom_pcie_ops *ops; > + bool pcie_1_pipe_clk_src_switch; Perhaps something little bit more generic, like pipe_clk_need_muxing? > +}; > + > struct qcom_pcie { > struct dw_pcie *pci; > void __iomem *parf; /* DT parf */ > @@ -197,6 +205,7 @@ struct qcom_pcie { > struct phy *phy; > struct gpio_desc *reset; > const struct qcom_pcie_ops *ops; > + bool pcie_1_pipe_clk_src_switch; > }; > > #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) > @@ -1167,6 +1176,20 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > if (ret < 0) > return ret; > > + if (pcie->pcie_1_pipe_clk_src_switch) { This looks much better, now it will easily scale to other platforms that have inherited this need. > + res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux"); > + if (IS_ERR(res->gcc_pcie_1_pipe_clk_src)) > + return PTR_ERR(res->gcc_pcie_1_pipe_clk_src); > + > + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); > + if (IS_ERR(res->phy_pipe_clk)) > + return PTR_ERR(res->phy_pipe_clk); > + > + res->ref_clk_src = devm_clk_get(dev, "ref"); > + if (IS_ERR(res->ref_clk_src)) > + return PTR_ERR(res->ref_clk_src); > + } > + > res->pipe_clk = devm_clk_get(dev, "pipe"); > return PTR_ERR_OR_ZERO(res->pipe_clk); > } > @@ -1185,6 +1208,10 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) > return ret; > } > > + /* Set TCXO as clock source for gcc_pcie_1_pipe_clk_src */ > + if (pcie->pcie_1_pipe_clk_src_switch) > + clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->ref_clk_src); > + > ret = clk_bulk_prepare_enable(res->num_clks, res->clks); > if (ret < 0) > goto err_disable_regulators; > @@ -1256,6 +1283,10 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) > { > struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > > + /* Set pipe clock as clock source for gcc_pcie_1_pipe_clk_src */ > + if (pcie->pcie_1_pipe_clk_src_switch) > + clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk); > + > return clk_prepare_enable(res->pipe_clk); > } > > @@ -1456,6 +1487,39 @@ static const struct qcom_pcie_ops ops_1_9_0 = { > .config_sid = qcom_pcie_config_sid_sm8250, > }; > > +static const struct qcom_pcie_cfg apq8084_cfg = { > + .ops = &ops_1_0_0, > +}; > + > +static const struct qcom_pcie_cfg ipq8064_cfg = { > + .ops = &ops_2_1_0, > +}; > + > +static const struct qcom_pcie_cfg msm8996_cfg = { > + .ops = &ops_2_3_2, > +}; > + > +static const struct qcom_pcie_cfg ipq8074_cfg = { > + .ops = &ops_2_3_3, > +}; > + > +static const struct qcom_pcie_cfg ipq4019_cfg = { > + .ops = &ops_2_4_0, > +}; > + > +static const struct qcom_pcie_cfg sdm845_cfg = { > + .ops = &ops_2_7_0, > +}; > + > +static const struct qcom_pcie_cfg sm8250_cfg = { > + .ops = &ops_1_9_0, > +}; > + > +static const struct qcom_pcie_cfg sc7280_cfg = { > + .ops = &ops_1_9_0, > + .pcie_1_pipe_clk_src_switch = true, > +}; > + > static const struct dw_pcie_ops dw_pcie_ops = { > .link_up = qcom_pcie_link_up, > .start_link = qcom_pcie_start_link, > @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) > struct pcie_port *pp; > struct dw_pcie *pci; > struct qcom_pcie *pcie; > + const struct qcom_pcie_cfg *pcie_cfg = NULL; First use of this variable is an assignment, so I don't see a need for zero initialize it. Regards, Bjorn > int ret; > > pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); > @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct platform_device *pdev) > > pcie->pci = pci; > > - pcie->ops = of_device_get_match_data(dev); > + pcie_cfg = of_device_get_match_data(dev); > + pcie->ops = pcie_cfg->ops; > + pcie->pcie_1_pipe_clk_src_switch = pcie_cfg->pcie_1_pipe_clk_src_switch; > > pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); > if (IS_ERR(pcie->reset)) { > @@ -1545,16 +1612,17 @@ static int qcom_pcie_probe(struct platform_device *pdev) > } > > static const struct of_device_id qcom_pcie_match[] = { > - { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, > - { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, > - { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, > - { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, > - { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, > - { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, > - { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, > - { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, > - { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, > - { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, > + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, > + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, > + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, > + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, > + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, > + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, > + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, > + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, > + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, > + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, > + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, > { } > }; > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On 2021-09-15 00:22, Bjorn Helgaas wrote: > On Tue, Sep 14, 2021 at 11:49:10PM +0530, Prasad Malisetty wrote: >> On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src >> must be the TCXO while gdsc is enabled. After PHY init successful >> clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. >> >> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> >> --- >> drivers/pci/controller/dwc/pcie-qcom.c | 90 >> +++++++++++++++++++++++++++++----- >> 1 file changed, 79 insertions(+), 11 deletions(-) >> >> +struct qcom_pcie_cfg { >> + const struct qcom_pcie_ops *ops; >> + bool pcie_1_pipe_clk_src_switch; > > This is OK, but all things being equal I like "unsigned int x:1" a > little better. Here's some background: > > Hi Bjorn, Thanks for sharing the details. Sure, I will replace bool with unsigned int in next patch version. Thanks -Prasad > https://lore.kernel.org/r/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com/ > > https://lore.kernel.org/r/CA+55aFxnePDimkVKVtv3gNmRGcwc8KQ5mHYvUxY8sAQg6yvVYg@mail.gmail.com/ > >> @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> struct pcie_port *pp; >> struct dw_pcie *pci; >> struct qcom_pcie *pcie; >> + const struct qcom_pcie_cfg *pcie_cfg = NULL; > > No need to initialize this, since you always assign it before using > it. > Agree, I will remove initialization in next patch series. >> int ret; >> >> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); >> @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> >> pcie->pci = pci; >> >> - pcie->ops = of_device_get_match_data(dev); >> + pcie_cfg = of_device_get_match_data(dev); >> + pcie->ops = pcie_cfg->ops; >> + pcie->pcie_1_pipe_clk_src_switch = >> pcie_cfg->pcie_1_pipe_clk_src_switch; >> >> pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); >> if (IS_ERR(pcie->reset)) { > > Looks good, thanks for working on this! Thanks Bjorn for the review.
On 2021-09-15 08:14, Bjorn Andersson wrote: > On Tue 14 Sep 11:19 PDT 2021, Prasad Malisetty wrote: > >> On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src >> must be the TCXO while gdsc is enabled. After PHY init successful >> clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. >> >> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> >> --- >> drivers/pci/controller/dwc/pcie-qcom.c | 90 >> +++++++++++++++++++++++++++++----- >> 1 file changed, 79 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c >> b/drivers/pci/controller/dwc/pcie-qcom.c >> index 8a7a300..380c962 100644 >> --- a/drivers/pci/controller/dwc/pcie-qcom.c >> +++ b/drivers/pci/controller/dwc/pcie-qcom.c >> @@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 { >> struct regulator_bulk_data supplies[2]; >> struct reset_control *pci_reset; >> struct clk *pipe_clk; >> + struct clk *gcc_pcie_1_pipe_clk_src; > > Afaict you have both 2 PCIe controllers on sc7280, so I think it seems > more reasonable to shorted this to "pipe_clk_src". > Agree. I will make it generic and update in next patch version. >> + struct clk *phy_pipe_clk; >> + struct clk *ref_clk_src; >> }; >> >> union qcom_pcie_resources { >> @@ -189,6 +192,11 @@ struct qcom_pcie_ops { >> int (*config_sid)(struct qcom_pcie *pcie); >> }; >> >> +struct qcom_pcie_cfg { >> + const struct qcom_pcie_ops *ops; >> + bool pcie_1_pipe_clk_src_switch; > > Perhaps something little bit more generic, like pipe_clk_need_muxing? > Sure, I will change it and update in next patch version. >> +}; >> + >> struct qcom_pcie { >> struct dw_pcie *pci; >> void __iomem *parf; /* DT parf */ >> @@ -197,6 +205,7 @@ struct qcom_pcie { >> struct phy *phy; >> struct gpio_desc *reset; >> const struct qcom_pcie_ops *ops; >> + bool pcie_1_pipe_clk_src_switch; >> }; >> >> #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) >> @@ -1167,6 +1176,20 @@ static int qcom_pcie_get_resources_2_7_0(struct >> qcom_pcie *pcie) >> if (ret < 0) >> return ret; >> >> + if (pcie->pcie_1_pipe_clk_src_switch) { > > This looks much better, now it will easily scale to other platforms > that > have inherited this need. Thanks Bjorn. > >> + res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux"); >> + if (IS_ERR(res->gcc_pcie_1_pipe_clk_src)) >> + return PTR_ERR(res->gcc_pcie_1_pipe_clk_src); >> + >> + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); >> + if (IS_ERR(res->phy_pipe_clk)) >> + return PTR_ERR(res->phy_pipe_clk); >> + >> + res->ref_clk_src = devm_clk_get(dev, "ref"); >> + if (IS_ERR(res->ref_clk_src)) >> + return PTR_ERR(res->ref_clk_src); >> + } >> + >> res->pipe_clk = devm_clk_get(dev, "pipe"); >> return PTR_ERR_OR_ZERO(res->pipe_clk); >> } >> @@ -1185,6 +1208,10 @@ static int qcom_pcie_init_2_7_0(struct >> qcom_pcie *pcie) >> return ret; >> } >> >> + /* Set TCXO as clock source for gcc_pcie_1_pipe_clk_src */ >> + if (pcie->pcie_1_pipe_clk_src_switch) >> + clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->ref_clk_src); >> + >> ret = clk_bulk_prepare_enable(res->num_clks, res->clks); >> if (ret < 0) >> goto err_disable_regulators; >> @@ -1256,6 +1283,10 @@ static int qcom_pcie_post_init_2_7_0(struct >> qcom_pcie *pcie) >> { >> struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; >> >> + /* Set pipe clock as clock source for gcc_pcie_1_pipe_clk_src */ >> + if (pcie->pcie_1_pipe_clk_src_switch) >> + clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk); >> + >> return clk_prepare_enable(res->pipe_clk); >> } >> >> @@ -1456,6 +1487,39 @@ static const struct qcom_pcie_ops ops_1_9_0 = { >> .config_sid = qcom_pcie_config_sid_sm8250, >> }; >> >> +static const struct qcom_pcie_cfg apq8084_cfg = { >> + .ops = &ops_1_0_0, >> +}; >> + >> +static const struct qcom_pcie_cfg ipq8064_cfg = { >> + .ops = &ops_2_1_0, >> +}; >> + >> +static const struct qcom_pcie_cfg msm8996_cfg = { >> + .ops = &ops_2_3_2, >> +}; >> + >> +static const struct qcom_pcie_cfg ipq8074_cfg = { >> + .ops = &ops_2_3_3, >> +}; >> + >> +static const struct qcom_pcie_cfg ipq4019_cfg = { >> + .ops = &ops_2_4_0, >> +}; >> + >> +static const struct qcom_pcie_cfg sdm845_cfg = { >> + .ops = &ops_2_7_0, >> +}; >> + >> +static const struct qcom_pcie_cfg sm8250_cfg = { >> + .ops = &ops_1_9_0, >> +}; >> + >> +static const struct qcom_pcie_cfg sc7280_cfg = { >> + .ops = &ops_1_9_0, >> + .pcie_1_pipe_clk_src_switch = true, >> +}; >> + >> static const struct dw_pcie_ops dw_pcie_ops = { >> .link_up = qcom_pcie_link_up, >> .start_link = qcom_pcie_start_link, >> @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> struct pcie_port *pp; >> struct dw_pcie *pci; >> struct qcom_pcie *pcie; >> + const struct qcom_pcie_cfg *pcie_cfg = NULL; > > First use of this variable is an assignment, so I don't see a need for > zero initialize it. > > Regards, > Bjorn > Sure, I will incorporate the changes in next patch version. >> int ret; >> >> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); >> @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> >> pcie->pci = pci; >> >> - pcie->ops = of_device_get_match_data(dev); >> + pcie_cfg = of_device_get_match_data(dev); >> + pcie->ops = pcie_cfg->ops; >> + pcie->pcie_1_pipe_clk_src_switch = >> pcie_cfg->pcie_1_pipe_clk_src_switch; >> >> pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); >> if (IS_ERR(pcie->reset)) { >> @@ -1545,16 +1612,17 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> } >> >> static const struct of_device_id qcom_pcie_match[] = { >> - { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, >> - { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, >> - { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, >> - { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, >> - { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, >> - { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, >> - { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, >> - { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, >> - { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, >> - { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, >> + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, >> + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, >> + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, >> + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, >> + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, >> + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, >> + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, >> + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, >> + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, >> + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, >> + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, >> { } >> }; >> >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >>
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 8a7a300..380c962 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 { struct regulator_bulk_data supplies[2]; struct reset_control *pci_reset; struct clk *pipe_clk; + struct clk *gcc_pcie_1_pipe_clk_src; + struct clk *phy_pipe_clk; + struct clk *ref_clk_src; }; union qcom_pcie_resources { @@ -189,6 +192,11 @@ struct qcom_pcie_ops { int (*config_sid)(struct qcom_pcie *pcie); }; +struct qcom_pcie_cfg { + const struct qcom_pcie_ops *ops; + bool pcie_1_pipe_clk_src_switch; +}; + struct qcom_pcie { struct dw_pcie *pci; void __iomem *parf; /* DT parf */ @@ -197,6 +205,7 @@ struct qcom_pcie { struct phy *phy; struct gpio_desc *reset; const struct qcom_pcie_ops *ops; + bool pcie_1_pipe_clk_src_switch; }; #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) @@ -1167,6 +1176,20 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) if (ret < 0) return ret; + if (pcie->pcie_1_pipe_clk_src_switch) { + res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux"); + if (IS_ERR(res->gcc_pcie_1_pipe_clk_src)) + return PTR_ERR(res->gcc_pcie_1_pipe_clk_src); + + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); + if (IS_ERR(res->phy_pipe_clk)) + return PTR_ERR(res->phy_pipe_clk); + + res->ref_clk_src = devm_clk_get(dev, "ref"); + if (IS_ERR(res->ref_clk_src)) + return PTR_ERR(res->ref_clk_src); + } + res->pipe_clk = devm_clk_get(dev, "pipe"); return PTR_ERR_OR_ZERO(res->pipe_clk); } @@ -1185,6 +1208,10 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) return ret; } + /* Set TCXO as clock source for gcc_pcie_1_pipe_clk_src */ + if (pcie->pcie_1_pipe_clk_src_switch) + clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->ref_clk_src); + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); if (ret < 0) goto err_disable_regulators; @@ -1256,6 +1283,10 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) { struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + /* Set pipe clock as clock source for gcc_pcie_1_pipe_clk_src */ + if (pcie->pcie_1_pipe_clk_src_switch) + clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk); + return clk_prepare_enable(res->pipe_clk); } @@ -1456,6 +1487,39 @@ static const struct qcom_pcie_ops ops_1_9_0 = { .config_sid = qcom_pcie_config_sid_sm8250, }; +static const struct qcom_pcie_cfg apq8084_cfg = { + .ops = &ops_1_0_0, +}; + +static const struct qcom_pcie_cfg ipq8064_cfg = { + .ops = &ops_2_1_0, +}; + +static const struct qcom_pcie_cfg msm8996_cfg = { + .ops = &ops_2_3_2, +}; + +static const struct qcom_pcie_cfg ipq8074_cfg = { + .ops = &ops_2_3_3, +}; + +static const struct qcom_pcie_cfg ipq4019_cfg = { + .ops = &ops_2_4_0, +}; + +static const struct qcom_pcie_cfg sdm845_cfg = { + .ops = &ops_2_7_0, +}; + +static const struct qcom_pcie_cfg sm8250_cfg = { + .ops = &ops_1_9_0, +}; + +static const struct qcom_pcie_cfg sc7280_cfg = { + .ops = &ops_1_9_0, + .pcie_1_pipe_clk_src_switch = true, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, .start_link = qcom_pcie_start_link, @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) struct pcie_port *pp; struct dw_pcie *pci; struct qcom_pcie *pcie; + const struct qcom_pcie_cfg *pcie_cfg = NULL; int ret; pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct platform_device *pdev) pcie->pci = pci; - pcie->ops = of_device_get_match_data(dev); + pcie_cfg = of_device_get_match_data(dev); + pcie->ops = pcie_cfg->ops; + pcie->pcie_1_pipe_clk_src_switch = pcie_cfg->pcie_1_pipe_clk_src_switch; pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); if (IS_ERR(pcie->reset)) { @@ -1545,16 +1612,17 @@ static int qcom_pcie_probe(struct platform_device *pdev) } static const struct of_device_id qcom_pcie_match[] = { - { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, - { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, - { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, - { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, - { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, - { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, - { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, - { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, - { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, - { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, { } };
On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src must be the TCXO while gdsc is enabled. After PHY init successful clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 90 +++++++++++++++++++++++++++++----- 1 file changed, 79 insertions(+), 11 deletions(-)