| Message ID | 20210915080841.73938-1-marex@denx.de (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | rsi: Fix module dev_oper_mode parameter description | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
+ linux-wireless Marek Vasut <marex@denx.de> writes: > The module parameters are missing dev_oper_mode 12, BT classic alone, > add it. Moreover, the parameters encode newlines, which ends up being > printed malformed e.g. by modinfo, so fix that too. > > However, the module parameter string is duplicated in both USB and SDIO > modules and the dev_oper_mode mode enumeration in those module parameters > is a duplicate of macros used by the driver. Furthermore, the enumeration > is confusing. > > So, deduplicate the module parameter string and use __stringify() to > encode the correct mode enumeration values into the module parameter > string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with > 'BT classic alone' to clarify what those modes really mean. > > Fixes: 898b255339310 ("rsi: add module parameter operating mode") > Signed-off-by: Marek Vasut <marex@denx.de> > Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> > Cc: Angus Ainslie <angus@akkea.ca> > Cc: David S. Miller <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kalle Valo <kvalo@codeaurora.org> > Cc: Karun Eagalapati <karun256@gmail.com> > Cc: Martin Fuzzey <martin.fuzzey@flowbird.group> > Cc: Martin Kepplinger <martink@posteo.de> > Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> > Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> > Cc: Siva Rebbagondla <siva8118@gmail.com> > To: netdev@vger.kernel.org > Cc: <stable@vger.kernel.org> # 4.17+ > --- > drivers/net/wireless/rsi/rsi_91x_sdio.c | 5 +---- > drivers/net/wireless/rsi/rsi_91x_usb.c | 5 +---- > drivers/net/wireless/rsi/rsi_hal.h | 11 +++++++++++ > 3 files changed, 13 insertions(+), 8 deletions(-) linux-wireless is not included so patchwork won't see this patch. Please resubmit (as v2) and include linux-wireless, more info in the wiki below.
On środa, 15 września 2021 10:08:41 CEST Marek Vasut wrote: > +#define DEV_OPMODE_PARAM_DESC \ > + __stringify(DEV_OPMODE_WIFI_ALONE) "[Wi-Fi alone], " \ > + __stringify(DEV_OPMODE_BT_ALONE) "[BT classic alone], " \ > + __stringify(DEV_OPMODE_BT_LE_ALONE) "[BT LE], " \ > + __stringify(DEV_OPMODE_BT_DUAL) "[BT Dual], " \ > + __stringify(DEV_OPMODE_STA_BT) "[Wi-Fi STA + BT classic], " \ > + __stringify(DEV_OPMODE_STA_BT_LE) "[Wi-Fi STA + BT LE], " \ > + __stringify(DEV_OPMODE_STA_BT_DUAL) "[Wi-Fi STA + BT classic + BT LE], " \ > + __stringify(DEV_OPMODE_AP_BT) "[AP + BT classic], " \ > + __stringify(DEV_OPMODE_AP_BT_DUAL) "[AP + BT classic + BT LE]" There's still some inconsistency in mode naming - how about: - Wi-Fi STA - BT classic - BT LE - BT classic + BT LE - Wi-Fi STA + BT classic - Wi-Fi STA + BT LE - Wi-Fi STA + BT classic + BT LE - Wi-Fi AP + BT classic - Wi-Fi AP + BT classic + BT LE "alone" could be added to the first three modes (you missed it in BT LE). Cheers, Sebastian
On 9/16/21 9:03 AM, Sebastian Krzyszkowiak wrote: > On środa, 15 września 2021 10:08:41 CEST Marek Vasut wrote: >> +#define DEV_OPMODE_PARAM_DESC \ >> + __stringify(DEV_OPMODE_WIFI_ALONE) "[Wi-Fi alone], " \ >> + __stringify(DEV_OPMODE_BT_ALONE) "[BT classic alone], " \ >> + __stringify(DEV_OPMODE_BT_LE_ALONE) "[BT LE], " > \ >> + __stringify(DEV_OPMODE_BT_DUAL) "[BT Dual], " > \ >> + __stringify(DEV_OPMODE_STA_BT) "[Wi-Fi STA + BT > classic], " \ >> + __stringify(DEV_OPMODE_STA_BT_LE) "[Wi-Fi STA + BT LE], " \ >> + __stringify(DEV_OPMODE_STA_BT_DUAL) "[Wi-Fi STA + BT > classic + BT LE], " \ >> + __stringify(DEV_OPMODE_AP_BT) "[AP + BT classic], " > \ >> + __stringify(DEV_OPMODE_AP_BT_DUAL) "[AP + BT classic + BT LE]" > > There's still some inconsistency in mode naming - how about: > > - Wi-Fi STA This mode is also AP capable > - BT classic > - BT LE > - BT classic + BT LE > - Wi-Fi STA + BT classic > - Wi-Fi STA + BT LE > - Wi-Fi STA + BT classic + BT LE > - Wi-Fi AP + BT classic > - Wi-Fi AP + BT classic + BT LE > > "alone" could be added to the first three modes (you missed it in BT LE). I can add the alone consistently, yes -- that's the point of the first three modes, that the "other" radio is disabled by the firmware.
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c index e0c502bc42707..9f16128e4ffab 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -24,10 +24,7 @@ /* Default operating mode is wlan STA + BT */ static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; module_param(dev_oper_mode, ushort, 0444); -MODULE_PARM_DESC(dev_oper_mode, - "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n" - "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n" - "6[AP + BT classic], 14[AP + BT classic + BT LE]"); +MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC); /** * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg. diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index 416976f098882..6a120211800db 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -25,10 +25,7 @@ /* Default operating mode is wlan STA + BT */ static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; module_param(dev_oper_mode, ushort, 0444); -MODULE_PARM_DESC(dev_oper_mode, - "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n" - "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n" - "6[AP + BT classic], 14[AP + BT classic + BT LE]"); +MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC); static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags); diff --git a/drivers/net/wireless/rsi/rsi_hal.h b/drivers/net/wireless/rsi/rsi_hal.h index d044a440fa080..e435df73ccce3 100644 --- a/drivers/net/wireless/rsi/rsi_hal.h +++ b/drivers/net/wireless/rsi/rsi_hal.h @@ -28,6 +28,17 @@ #define DEV_OPMODE_AP_BT 6 #define DEV_OPMODE_AP_BT_DUAL 14 +#define DEV_OPMODE_PARAM_DESC \ + __stringify(DEV_OPMODE_WIFI_ALONE) "[Wi-Fi alone], " \ + __stringify(DEV_OPMODE_BT_ALONE) "[BT classic alone], " \ + __stringify(DEV_OPMODE_BT_LE_ALONE) "[BT LE], " \ + __stringify(DEV_OPMODE_BT_DUAL) "[BT Dual], " \ + __stringify(DEV_OPMODE_STA_BT) "[Wi-Fi STA + BT classic], " \ + __stringify(DEV_OPMODE_STA_BT_LE) "[Wi-Fi STA + BT LE], " \ + __stringify(DEV_OPMODE_STA_BT_DUAL) "[Wi-Fi STA + BT classic + BT LE], " \ + __stringify(DEV_OPMODE_AP_BT) "[AP + BT classic], " \ + __stringify(DEV_OPMODE_AP_BT_DUAL) "[AP + BT classic + BT LE]" + #define FLASH_WRITE_CHUNK_SIZE (4 * 1024) #define FLASH_SECTOR_SIZE (4 * 1024)
The module parameters are missing dev_oper_mode 12, BT classic alone, add it. Moreover, the parameters encode newlines, which ends up being printed malformed e.g. by modinfo, so fix that too. However, the module parameter string is duplicated in both USB and SDIO modules and the dev_oper_mode mode enumeration in those module parameters is a duplicate of macros used by the driver. Furthermore, the enumeration is confusing. So, deduplicate the module parameter string and use __stringify() to encode the correct mode enumeration values into the module parameter string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with 'BT classic alone' to clarify what those modes really mean. Fixes: 898b255339310 ("rsi: add module parameter operating mode") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Fuzzey <martin.fuzzey@flowbird.group> Cc: Martin Kepplinger <martink@posteo.de> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> To: netdev@vger.kernel.org Cc: <stable@vger.kernel.org> # 4.17+ --- drivers/net/wireless/rsi/rsi_91x_sdio.c | 5 +---- drivers/net/wireless/rsi/rsi_91x_usb.c | 5 +---- drivers/net/wireless/rsi/rsi_hal.h | 11 +++++++++++ 3 files changed, 13 insertions(+), 8 deletions(-)