| Message ID | 20210916092515.10553-3-chiawei_wang@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm: aspeed: Add UART routing support | expand |
On Thu, Sep 16, 2021 at 05:25:13PM +0800, Chia-Wei Wang wrote: > Add dt-bindings for Aspeed UART routing controller. > > Signed-off-by: Oskar Senft <osk@google.com> > Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> > --- > .../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++ > .../bindings/soc/aspeed/uart-routing.yaml | 70 +++++++++++++++++++ > 2 files changed, 74 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > index 54f080df5e2f..697331d840a0 100644 > --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > @@ -142,6 +142,10 @@ patternProperties: > - interrupts > - snoop-ports > > + "^uart-routing@[0-9a-f]+$": > + $ref: /schemas/soc/aspeed/uart-routing.yaml# > + description: The UART routing control under LPC register space > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > new file mode 100644 > index 000000000000..534b2a9340ce > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > @@ -0,0 +1,70 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# # Copyright (c) 2018 Google LLC > +# # Copyright (c) 2021 Aspeed Technology Inc. > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Aspeed UART Routing Controller > + > +maintainers: > + - Oskar Senft <osk@google.com> > + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> > + > +description: > + The Aspeed UART routing control allow to dynamically route the inputs for > + the built-in UARTS and physical serial I/O ports. > + > + This allows, for example, to connect the output of UART to another UART. > + This can be used to enable Host <-> BMC communication via UARTs, e.g. to > + allow access to the Host's serial console. > + > + This driver is for the BMC side. The sysfs files allow the BMC userspace > + which owns the system configuration policy, to configure how UARTs and > + physical serial I/O ports are routed. > + > + Two types of files, uart* and io*, are presented in sysfs. The uart* > + configures the input signal of a UART controller whereas io* configures > + that of a physical serial port. > + > + When read, each file shows the list of available options with currently > + selected option marked by brackets "[]". The list of available options > + depends on the selected file. > + > + e.g. > + cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 > + [io1] io2 io3 io4 uart2 uart3 uart4 io6 > + > + In this case, UART1 gets its input from IO1 (physical serial port 1). This is about documenting the hardware, not an OS driver. sysfs files have their own documentation. > + > +properties: > + compatible: > + items: > + - enum: > + - aspeed,ast2400-uart-routing > + - aspeed,ast2500-uart-routing > + - aspeed,ast2600-uart-routing > + reg: > + maxItems: 1 > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + lpc: lpc@1e789000 { > + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; > + reg = <0x1e789000 0x1000>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x1e789000 0x1000>; > + > + uart_routing: uart-routing@98 { > + compatible = "aspeed,ast2600-uart-routing"; > + reg = <0x98 0x8>; > + }; > + }; > -- > 2.17.1 > >
Hi Rob, > From: Rob Herring <robh@kernel.org> > Sent: Friday, September 17, 2021 4:19 AM > > On Thu, Sep 16, 2021 at 05:25:13PM +0800, Chia-Wei Wang wrote: > > Add dt-bindings for Aspeed UART routing controller. > > > > Signed-off-by: Oskar Senft <osk@google.com> > > Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> > > --- > > .../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++ > > .../bindings/soc/aspeed/uart-routing.yaml | 70 > +++++++++++++++++++ > > 2 files changed, 74 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > > > > diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > > b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > > index 54f080df5e2f..697331d840a0 100644 > > --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > > +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml > > @@ -142,6 +142,10 @@ patternProperties: > > - interrupts > > - snoop-ports > > > > + "^uart-routing@[0-9a-f]+$": > > + $ref: /schemas/soc/aspeed/uart-routing.yaml# > > + description: The UART routing control under LPC register space > > + > > required: > > - compatible > > - reg > > diff --git > > a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > > b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > > new file mode 100644 > > index 000000000000..534b2a9340ce > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml > > @@ -0,0 +1,70 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # # > > +Copyright (c) 2018 Google LLC # # Copyright (c) 2021 Aspeed > > +Technology Inc. > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Aspeed UART Routing Controller > > + > > +maintainers: > > + - Oskar Senft <osk@google.com> > > + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> > > + > > +description: > > + The Aspeed UART routing control allow to dynamically route the > > +inputs for > > + the built-in UARTS and physical serial I/O ports. > > + > > + This allows, for example, to connect the output of UART to another UART. > > + This can be used to enable Host <-> BMC communication via UARTs, > > + e.g. to allow access to the Host's serial console. > > + > > + This driver is for the BMC side. The sysfs files allow the BMC > > + userspace which owns the system configuration policy, to configure > > + how UARTs and physical serial I/O ports are routed. > > + > > + Two types of files, uart* and io*, are presented in sysfs. The > > + uart* configures the input signal of a UART controller whereas io* > > + configures that of a physical serial port. > > + > > + When read, each file shows the list of available options with > > + currently selected option marked by brackets "[]". The list of > > + available options depends on the selected file. > > + > > + e.g. > > + cat > > + /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 > > + [io1] io2 io3 io4 uart2 uart3 uart4 io6 > > + > > + In this case, UART1 gets its input from IO1 (physical serial port 1). > > This is about documenting the hardware, not an OS driver. > > sysfs files have their own documentation. > Understood. I will remove this sysfs description from bindings in the next revision. Thanks. Chiawei
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml index 54f080df5e2f..697331d840a0 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -142,6 +142,10 @@ patternProperties: - interrupts - snoop-ports + "^uart-routing@[0-9a-f]+$": + $ref: /schemas/soc/aspeed/uart-routing.yaml# + description: The UART routing control under LPC register space + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml new file mode 100644 index 000000000000..534b2a9340ce --- /dev/null +++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# # Copyright (c) 2018 Google LLC +# # Copyright (c) 2021 Aspeed Technology Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Aspeed UART Routing Controller + +maintainers: + - Oskar Senft <osk@google.com> + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> + +description: + The Aspeed UART routing control allow to dynamically route the inputs for + the built-in UARTS and physical serial I/O ports. + + This allows, for example, to connect the output of UART to another UART. + This can be used to enable Host <-> BMC communication via UARTs, e.g. to + allow access to the Host's serial console. + + This driver is for the BMC side. The sysfs files allow the BMC userspace + which owns the system configuration policy, to configure how UARTs and + physical serial I/O ports are routed. + + Two types of files, uart* and io*, are presented in sysfs. The uart* + configures the input signal of a UART controller whereas io* configures + that of a physical serial port. + + When read, each file shows the list of available options with currently + selected option marked by brackets "[]". The list of available options + depends on the selected file. + + e.g. + cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 + [io1] io2 io3 io4 uart2 uart3 uart4 io6 + + In this case, UART1 gets its input from IO1 (physical serial port 1). + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-uart-routing + - aspeed,ast2500-uart-routing + - aspeed,ast2600-uart-routing + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + uart_routing: uart-routing@98 { + compatible = "aspeed,ast2600-uart-routing"; + reg = <0x98 0x8>; + }; + };