| Message ID | 20210917031308.17623-1-caihuoqing@baidu.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | [1/2] backlight: bd6107: Make use of the helper function dev_err_probe() | expand |
On Fri, Sep 17, 2021 at 11:13:06AM +0800, Cai Huoqing wrote: > When possible use dev_err_probe help to properly deal with the > PROBE_DEFER error, the benefit is that DEFER issue will be logged > in the devices_deferred debugfs file. > Using dev_err_probe() can reduce code size, and the error value > gets printed. > > Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Change seems OK but does this really need to be done one file at a time? I'd prefer to see all of backlight handled in one go (given the scope of this change if applied across the kernel it needs automatic tooling anyway). Daniel. > --- > drivers/video/backlight/bd6107.c | 16 ++++++---------- > 1 file changed, 6 insertions(+), 10 deletions(-) > > diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c > index 515184fbe33a..e21b793302a2 100644 > --- a/drivers/video/backlight/bd6107.c > +++ b/drivers/video/backlight/bd6107.c > @@ -120,7 +120,6 @@ static int bd6107_probe(struct i2c_client *client, > struct backlight_device *backlight; > struct backlight_properties props; > struct bd6107 *bd; > - int ret; > > if (pdata == NULL) { > dev_err(&client->dev, "No platform data\n"); > @@ -148,11 +147,9 @@ static int bd6107_probe(struct i2c_client *client, > * the reset. > */ > bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); > - if (IS_ERR(bd->reset)) { > - dev_err(&client->dev, "unable to request reset GPIO\n"); > - ret = PTR_ERR(bd->reset); > - return ret; > - } > + if (IS_ERR(bd->reset)) > + return dev_err_probe(&client->dev, PTR_ERR(bd->reset), > + "unable to request reset GPIO\n"); > > memset(&props, 0, sizeof(props)); > props.type = BACKLIGHT_RAW; > @@ -164,10 +161,9 @@ static int bd6107_probe(struct i2c_client *client, > dev_name(&client->dev), > &bd->client->dev, bd, > &bd6107_backlight_ops, &props); > - if (IS_ERR(backlight)) { > - dev_err(&client->dev, "failed to register backlight\n"); > - return PTR_ERR(backlight); > - } > + if (IS_ERR(backlight)) > + return dev_err_probe(&client->dev, PTR_ERR(backlight), > + "failed to register backlight\n"); > > backlight_update_status(backlight); > i2c_set_clientdata(client, backlight); > -- > 2.25.1 >
Hi Thanks for your feedback. On 17 9月 21 10:17:29, Daniel Thompson wrote: > On Fri, Sep 17, 2021 at 11:13:06AM +0800, Cai Huoqing wrote: > > When possible use dev_err_probe help to properly deal with the > > PROBE_DEFER error, the benefit is that DEFER issue will be logged > > in the devices_deferred debugfs file. > > Using dev_err_probe() can reduce code size, and the error value > > gets printed. > > > > Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> > > Change seems OK but does this really need to be done one file at a time? > I'd prefer to see all of backlight handled in one go (given the scope of > this change if applied across the kernel it needs automatic tooling > anyway). Only two related patches for backlight. I try to keep one patch for a subdriver, sometimes different subdriver owner need to mark reviwed independently. Thanks, Cai > > Daniel. > > > > --- > > drivers/video/backlight/bd6107.c | 16 ++++++---------- > > 1 file changed, 6 insertions(+), 10 deletions(-) > > > > diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c > > index 515184fbe33a..e21b793302a2 100644 > > --- a/drivers/video/backlight/bd6107.c > > +++ b/drivers/video/backlight/bd6107.c > > @@ -120,7 +120,6 @@ static int bd6107_probe(struct i2c_client *client, > > struct backlight_device *backlight; > > struct backlight_properties props; > > struct bd6107 *bd; > > - int ret; > > > > if (pdata == NULL) { > > dev_err(&client->dev, "No platform data\n"); > > @@ -148,11 +147,9 @@ static int bd6107_probe(struct i2c_client *client, > > * the reset. > > */ > > bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); > > - if (IS_ERR(bd->reset)) { > > - dev_err(&client->dev, "unable to request reset GPIO\n"); > > - ret = PTR_ERR(bd->reset); > > - return ret; > > - } > > + if (IS_ERR(bd->reset)) > > + return dev_err_probe(&client->dev, PTR_ERR(bd->reset), > > + "unable to request reset GPIO\n"); > > > > memset(&props, 0, sizeof(props)); > > props.type = BACKLIGHT_RAW; > > @@ -164,10 +161,9 @@ static int bd6107_probe(struct i2c_client *client, > > dev_name(&client->dev), > > &bd->client->dev, bd, > > &bd6107_backlight_ops, &props); > > - if (IS_ERR(backlight)) { > > - dev_err(&client->dev, "failed to register backlight\n"); > > - return PTR_ERR(backlight); > > - } > > + if (IS_ERR(backlight)) > > + return dev_err_probe(&client->dev, PTR_ERR(backlight), > > + "failed to register backlight\n"); > > > > backlight_update_status(backlight); > > i2c_set_clientdata(client, backlight); > > -- > > 2.25.1 > >
On Fri, Sep 17, 2021 at 07:05:28PM +0800, Cai Huoqing wrote: > Hi > Thanks for your feedback. > On 17 9月 21 10:17:29, Daniel Thompson wrote: > > On Fri, Sep 17, 2021 at 11:13:06AM +0800, Cai Huoqing wrote: > > > When possible use dev_err_probe help to properly deal with the > > > PROBE_DEFER error, the benefit is that DEFER issue will be logged > > > in the devices_deferred debugfs file. > > > Using dev_err_probe() can reduce code size, and the error value > > > gets printed. > > > > > > Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> > > > > Change seems OK but does this really need to be done one file at a time? > > I'd prefer to see all of backlight handled in one go (given the scope of > > this change if applied across the kernel it needs automatic tooling > > anyway). > Only two related patches for backlight. Can you explain how you reach this conclusion? I only checked two drivers (the first two when you list the drivers an alphabetic order) but both contain code that appears to match the pattern you are targeting. > I try to keep one patch for a subdriver, sometimes different > subdriver owner need to mark reviwed independently. For mechanical patches of this nature I don't think there is any need for acks from individual backlight driver authors. Reviews are 100% welcome but we would not hold a single patch back until all authors have reviewed it. Daniel. > > > --- > > > drivers/video/backlight/bd6107.c | 16 ++++++---------- > > > 1 file changed, 6 insertions(+), 10 deletions(-) > > > > > > diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c > > > index 515184fbe33a..e21b793302a2 100644 > > > --- a/drivers/video/backlight/bd6107.c > > > +++ b/drivers/video/backlight/bd6107.c > > > @@ -120,7 +120,6 @@ static int bd6107_probe(struct i2c_client *client, > > > struct backlight_device *backlight; > > > struct backlight_properties props; > > > struct bd6107 *bd; > > > - int ret; > > > > > > if (pdata == NULL) { > > > dev_err(&client->dev, "No platform data\n"); > > > @@ -148,11 +147,9 @@ static int bd6107_probe(struct i2c_client *client, > > > * the reset. > > > */ > > > bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); > > > - if (IS_ERR(bd->reset)) { > > > - dev_err(&client->dev, "unable to request reset GPIO\n"); > > > - ret = PTR_ERR(bd->reset); > > > - return ret; > > > - } > > > + if (IS_ERR(bd->reset)) > > > + return dev_err_probe(&client->dev, PTR_ERR(bd->reset), > > > + "unable to request reset GPIO\n"); > > > > > > memset(&props, 0, sizeof(props)); > > > props.type = BACKLIGHT_RAW; > > > @@ -164,10 +161,9 @@ static int bd6107_probe(struct i2c_client *client, > > > dev_name(&client->dev), > > > &bd->client->dev, bd, > > > &bd6107_backlight_ops, &props); > > > - if (IS_ERR(backlight)) { > > > - dev_err(&client->dev, "failed to register backlight\n"); > > > - return PTR_ERR(backlight); > > > - } > > > + if (IS_ERR(backlight)) > > > + return dev_err_probe(&client->dev, PTR_ERR(backlight), > > > + "failed to register backlight\n"); > > > > > > backlight_update_status(backlight); > > > i2c_set_clientdata(client, backlight); > > > -- > > > 2.25.1 > > >
diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c index 515184fbe33a..e21b793302a2 100644 --- a/drivers/video/backlight/bd6107.c +++ b/drivers/video/backlight/bd6107.c @@ -120,7 +120,6 @@ static int bd6107_probe(struct i2c_client *client, struct backlight_device *backlight; struct backlight_properties props; struct bd6107 *bd; - int ret; if (pdata == NULL) { dev_err(&client->dev, "No platform data\n"); @@ -148,11 +147,9 @@ static int bd6107_probe(struct i2c_client *client, * the reset. */ bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(bd->reset)) { - dev_err(&client->dev, "unable to request reset GPIO\n"); - ret = PTR_ERR(bd->reset); - return ret; - } + if (IS_ERR(bd->reset)) + return dev_err_probe(&client->dev, PTR_ERR(bd->reset), + "unable to request reset GPIO\n"); memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_RAW; @@ -164,10 +161,9 @@ static int bd6107_probe(struct i2c_client *client, dev_name(&client->dev), &bd->client->dev, bd, &bd6107_backlight_ops, &props); - if (IS_ERR(backlight)) { - dev_err(&client->dev, "failed to register backlight\n"); - return PTR_ERR(backlight); - } + if (IS_ERR(backlight)) + return dev_err_probe(&client->dev, PTR_ERR(backlight), + "failed to register backlight\n"); backlight_update_status(backlight); i2c_set_clientdata(client, backlight);
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> --- drivers/video/backlight/bd6107.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)