diff mbox series

[v2,3/3] ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W

Message ID 20210914184141.32700-4-romain.perier@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add support for IDO-SBC2D06-V1B-22W | expand

Commit Message

Romain Perier Sept. 14, 2021, 6:41 p.m. UTC 
The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D
with a dual Ethernet and a connector for a 4-inch and 7-inch display.
It embeds a System-On-Module IDO-SOM2D01[2] with an Mstar SSD202 SoC
dual-core Cortex-A7 CPU @ 1.2Ghz , 2D GPU, 128 MB DDR3 (on-chip) and
a 256MB SPI NAND flash. This commit adds basic definition for this
board.

1. http://linux-chenxing.org/infinity2/ido-sbc2d06
2. http://www.wireless-tag.com/portfolio/ido-som2d01

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 .../devicetree/bindings/arm/mstar/mstar.yaml  |  2 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 .../dts/mstar-infinity2m-ssd201-som2d01.dtsi  | 20 +++++++++++++
 ...sd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts | 23 +++++++++++++++
 ...ity2m-ssd202d-wirelesstag-ido-som2d01.dtsi | 28 +++++++++++++++++++
 5 files changed, 74 insertions(+)
 create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
 create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
 create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi

Comments

Daniel Palmer Sept. 15, 2021, 10:09 a.m. UTC | #1 
Hi Romain,

On Wed, 15 Sept 2021 at 03:42, Romain Perier <romain.perier@gmail.com> wrote:
> 1. http://linux-chenxing.org/infinity2/ido-sbc2d06
> 2. http://www.wireless-tag.com/portfolio/ido-som2d01

I think these should be Link: xxxx. I can fix this up if/when I put it
into the mstar dt for 5.16 branch though.

> diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
> index a316eef1b728..10efd703717e 100644
> --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
> +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
> @@ -25,6 +25,8 @@ properties:
>            - enum:
>                - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
>                - m5stack,unitv2 # M5Stack UnitV2
> +              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
> +              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
>            - const: mstar,infinity2m
>
>        - description: infinity3 boards

Looks fine.

> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7e0934180724..7f0e92cea716 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1448,6 +1448,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
>  dtb-$(CONFIG_ARCH_MSTARV7) += \
>         mstar-infinity-msc313-breadbee_crust.dtb \
> +       mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
>         mstar-infinity2m-ssd202d-ssd201htv2.dtb \
>         mstar-infinity2m-ssd202d-unitv2.dtb \
>         mstar-infinity3-msc313e-breadbee.dtb \

Looks fine.

> diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
> new file mode 100644
> index 000000000000..34df472fed71
> --- /dev/null
> +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2021 thingy.jp.
> + * Author: Daniel Palmer <daniel@thingy.jp>
> + * Author: Romain Perier <romain.perier@gmail.com>
> + */
> +
> +/ {
> +       reg_vcc_dram: regulator-vcc-dram {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc_dram";
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +               regulator-boot-on;
> +       };
> +};
> +
> +&pm_uart {
> +       status = "okay";
> +};

Looks fine.

> diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
> new file mode 100644
> index 000000000000..20b40b711d4f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2021 thingy.jp.
> + * Author: Daniel Palmer <daniel@thingy.jp>
> + * Author: Romain Perier <romain.perier@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +       model = "Wireless Tag IDO-SBC2D06-1VB-22W";
> +       compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "wirelesstag,ido-som2d01", "mstar,infinity2m";
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               sys_led {
> +                       gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "heartbeat";
> +               };
> +       };
> +};

Looks fine.

> diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
> new file mode 100644
> index 000000000000..d877aff85033
> --- /dev/null
> +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2021 thingy.jp.
> + * Author: Daniel Palmer <daniel@thingy.jp>
> + * Author: Romain Perier <romain.perier@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "mstar-infinity2m-ssd202d.dtsi"
> +#include "mstar-infinity2m-ssd201-som2d01.dtsi"
> +
> +/ {
> +       model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
> +       compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
> +
> +       aliases {
> +               serial0 = &pm_uart;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +};
> +
> +&reg_vcc_dram {
> +       regulator-min-microvolt = <1500000>;
> +       regulator-max-microvolt = <1500000>;
> +};
> --
> 2.33.0
>

Looks ok.

At some point, probably next week, I'll take these into the
msc313_mainlining branch[0] and rework the commits that build on top
of this.

Cheers,

Daniel

0 - https://github.com/linux-chenxing/linux/tree/msc313_mainlining
Rob Herring (Arm) Sept. 21, 2021, 9:14 p.m. UTC | #2 
On Tue, Sep 14, 2021 at 08:41:41PM +0200, Romain Perier wrote:
> The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D
> with a dual Ethernet and a connector for a 4-inch and 7-inch display.
> It embeds a System-On-Module IDO-SOM2D01[2] with an Mstar SSD202 SoC
> dual-core Cortex-A7 CPU @ 1.2Ghz , 2D GPU, 128 MB DDR3 (on-chip) and
> a 256MB SPI NAND flash. This commit adds basic definition for this
> board.
> 
> 1. http://linux-chenxing.org/infinity2/ido-sbc2d06
> 2. http://www.wireless-tag.com/portfolio/ido-som2d01
> 
> Signed-off-by: Romain Perier <romain.perier@gmail.com>
> ---
>  .../devicetree/bindings/arm/mstar/mstar.yaml  |  2 ++
>  arch/arm/boot/dts/Makefile                    |  1 +
>  .../dts/mstar-infinity2m-ssd201-som2d01.dtsi  | 20 +++++++++++++
>  ...sd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts | 23 +++++++++++++++
>  ...ity2m-ssd202d-wirelesstag-ido-som2d01.dtsi | 28 +++++++++++++++++++
>  5 files changed, 74 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
>  create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
>  create mode 100644 arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
> index a316eef1b728..10efd703717e 100644
> --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
> +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
> @@ -25,6 +25,8 @@ properties:
>            - enum:
>                - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
>                - m5stack,unitv2 # M5Stack UnitV2
> +              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
> +              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
>            - const: mstar,infinity2m
>  
>        - description: infinity3 boards
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7e0934180724..7f0e92cea716 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1448,6 +1448,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
>  dtb-$(CONFIG_ARCH_MSTARV7) += \
>  	mstar-infinity-msc313-breadbee_crust.dtb \
> +	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
>  	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
>  	mstar-infinity2m-ssd202d-unitv2.dtb \
>  	mstar-infinity3-msc313e-breadbee.dtb \
> diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
> new file mode 100644
> index 000000000000..34df472fed71
> --- /dev/null
> +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2021 thingy.jp.
> + * Author: Daniel Palmer <daniel@thingy.jp>
> + * Author: Romain Perier <romain.perier@gmail.com>
> + */
> +
> +/ {
> +	reg_vcc_dram: regulator-vcc-dram {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_dram";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-boot-on;
> +	};
> +};
> +
> +&pm_uart {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
> new file mode 100644
> index 000000000000..20b40b711d4f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2021 thingy.jp.
> + * Author: Daniel Palmer <daniel@thingy.jp>
> + * Author: Romain Perier <romain.perier@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "Wireless Tag IDO-SBC2D06-1VB-22W";
> +	compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "wirelesstag,ido-som2d01", "mstar,infinity2m";

Doesn't match the schema. Please run 'make dtbs_check' on this and don't 
add new (non-duplicate) warnings.
 
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		sys_led {
> +			gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
> new file mode 100644
> index 000000000000..d877aff85033
> --- /dev/null
> +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2021 thingy.jp.
> + * Author: Daniel Palmer <daniel@thingy.jp>
> + * Author: Romain Perier <romain.perier@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "mstar-infinity2m-ssd202d.dtsi"
> +#include "mstar-infinity2m-ssd201-som2d01.dtsi"
> +
> +/ {
> +	model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
> +	compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
> +
> +	aliases {
> +		serial0 = &pm_uart;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&reg_vcc_dram {
> +	regulator-min-microvolt = <1500000>;
> +	regulator-max-microvolt = <1500000>;
> +};
> -- 
> 2.33.0
> 
>
Rob Herring (Arm) Sept. 21, 2021, 9:17 p.m. UTC | #3 
On Wed, Sep 15, 2021 at 07:09:34PM +0900, Daniel Palmer wrote:
> Hi Romain,
> 
> On Wed, 15 Sept 2021 at 03:42, Romain Perier <romain.perier@gmail.com> wrote:
> > 1. http://linux-chenxing.org/infinity2/ido-sbc2d06
> > 2. http://www.wireless-tag.com/portfolio/ido-som2d01
> 
> I think these should be Link: xxxx. I can fix this up if/when I put it
> into the mstar dt for 5.16 branch though.

Not really. 'Link' is for the link to this patch in lore and sometimes 
to a discussion leading to the patch.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
index a316eef1b728..10efd703717e 100644
--- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -25,6 +25,8 @@  properties:
           - enum:
               - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
               - m5stack,unitv2 # M5Stack UnitV2
+              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
+              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
           - const: mstar,infinity2m
 
       - description: infinity3 boards
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724..7f0e92cea716 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1448,6 +1448,7 @@  dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_MSTARV7) += \
 	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
 	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
 	mstar-infinity2m-ssd202d-unitv2.dtb \
 	mstar-infinity3-msc313e-breadbee.dtb \
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
new file mode 100644
index 000000000000..34df472fed71
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
@@ -0,0 +1,20 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/ {
+	reg_vcc_dram: regulator-vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dram";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
new file mode 100644
index 000000000000..20b40b711d4f
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
@@ -0,0 +1,23 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Wireless Tag IDO-SBC2D06-1VB-22W";
+	compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "wirelesstag,ido-som2d01", "mstar,infinity2m";
+
+	leds {
+		compatible = "gpio-leds";
+		sys_led {
+			gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
new file mode 100644
index 000000000000..d877aff85033
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
@@ -0,0 +1,28 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+#include "mstar-infinity2m-ssd201-som2d01.dtsi"
+
+/ {
+	model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
+	compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&reg_vcc_dram {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};