Message ID | 20210920172249.28206-4-digetx@gmail.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | Make probe() of Tegra devfreq driver completely resource-managed | expand |
On 21. 9. 21. 오전 2:22, Dmitry Osipenko wrote: > Use resource-managed API helpers to simplify driver's probe() function, > making code cleaner. > > Signed-off-by: Dmitry Osipenko <digetx@gmail.com> > --- > drivers/devfreq/tegra30-devfreq.c | 107 +++++++++++++----------------- > 1 file changed, 46 insertions(+), 61 deletions(-) > > diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c > index 10661eb2aed8..d83fdc2713ed 100644 > --- a/drivers/devfreq/tegra30-devfreq.c > +++ b/drivers/devfreq/tegra30-devfreq.c > @@ -178,7 +178,6 @@ struct tegra_devfreq_soc_data { > > struct tegra_devfreq { > struct devfreq *devfreq; > - struct opp_table *opp_table; > > struct reset_control *reset; > struct clk *clock; > @@ -789,6 +788,39 @@ static struct devfreq_governor tegra_devfreq_governor = { > .event_handler = tegra_governor_event_handler, > }; > > +static void devm_tegra_devfreq_deinit_hw(void *data) > +{ > + struct tegra_devfreq *tegra = data; > + > + reset_control_reset(tegra->reset); > + clk_disable_unprepare(tegra->clock); > +} > + > +static int devm_tegra_devfreq_init_hw(struct device *dev, > + struct tegra_devfreq *tegra) > +{ > + int err; > + > + err = clk_prepare_enable(tegra->clock); > + if (err) { > + dev_err(dev, "Failed to prepare and enable ACTMON clock\n"); > + return err; > + } > + > + err = devm_add_action_or_reset(dev, devm_tegra_devfreq_deinit_hw, > + tegra); > + if (err) > + return err; > + > + err = reset_control_reset(tegra->reset); > + if (err) { > + dev_err(dev, "Failed to reset hardware: %d\n", err); > + return err; > + } > + > + return err; > +} > + > static int tegra_devfreq_probe(struct platform_device *pdev) > { > u32 hw_version = BIT(tegra_sku_info.soc_speedo_id); > @@ -842,38 +874,26 @@ static int tegra_devfreq_probe(struct platform_device *pdev) > return err; > } > > - tegra->opp_table = dev_pm_opp_set_supported_hw(&pdev->dev, > - &hw_version, 1); > - err = PTR_ERR_OR_ZERO(tegra->opp_table); > + err = devm_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1); > if (err) { > dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err); > return err; > } > > - err = dev_pm_opp_of_add_table_noclk(&pdev->dev, 0); > + err = devm_pm_opp_of_add_table_noclk(&pdev->dev, 0); > if (err) { > dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err); > - goto put_hw; > - } > - > - err = clk_prepare_enable(tegra->clock); > - if (err) { > - dev_err(&pdev->dev, > - "Failed to prepare and enable ACTMON clock\n"); > - goto remove_table; > + return err; > } > > - err = reset_control_reset(tegra->reset); > - if (err) { > - dev_err(&pdev->dev, "Failed to reset hardware: %d\n", err); > - goto disable_clk; > - } > + err = devm_tegra_devfreq_init_hw(&pdev->dev, tegra); > + if (err) > + return err; > > rate = clk_round_rate(tegra->emc_clock, ULONG_MAX); > if (rate < 0) { > dev_err(&pdev->dev, "Failed to round clock rate: %ld\n", rate); > - err = rate; > - goto disable_clk; > + return rate; > } > > tegra->max_freq = rate / KHZ; > @@ -892,52 +912,18 @@ static int tegra_devfreq_probe(struct platform_device *pdev) > INIT_DELAYED_WORK(&tegra->cpufreq_update_work, > tegra_actmon_delayed_update); > > - err = devfreq_add_governor(&tegra_devfreq_governor); > + err = devm_devfreq_add_governor(&pdev->dev, &tegra_devfreq_governor); > if (err) { > dev_err(&pdev->dev, "Failed to add governor: %d\n", err); > - goto remove_opps; > + return err; > } > > tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock); > > - devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile, > - "tegra_actmon", NULL); > - if (IS_ERR(devfreq)) { > - err = PTR_ERR(devfreq); > - goto remove_governor; > - } > - > - return 0; > - > -remove_governor: > - devfreq_remove_governor(&tegra_devfreq_governor); > - > -remove_opps: > - dev_pm_opp_remove_all_dynamic(&pdev->dev); > - > - reset_control_reset(tegra->reset); > -disable_clk: > - clk_disable_unprepare(tegra->clock); > -remove_table: > - dev_pm_opp_of_remove_table(&pdev->dev); > -put_hw: > - dev_pm_opp_put_supported_hw(tegra->opp_table); > - > - return err; > -} > - > -static int tegra_devfreq_remove(struct platform_device *pdev) > -{ > - struct tegra_devfreq *tegra = platform_get_drvdata(pdev); > - > - devfreq_remove_device(tegra->devfreq); > - devfreq_remove_governor(&tegra_devfreq_governor); > - > - reset_control_reset(tegra->reset); > - clk_disable_unprepare(tegra->clock); > - > - dev_pm_opp_of_remove_table(&pdev->dev); > - dev_pm_opp_put_supported_hw(tegra->opp_table); > + devfreq = devm_devfreq_add_device(&pdev->dev, &tegra_devfreq_profile, > + "tegra_actmon", NULL); > + if (IS_ERR(devfreq)) > + return PTR_ERR(devfreq); > > return 0; > } > @@ -967,7 +953,6 @@ MODULE_DEVICE_TABLE(of, tegra_devfreq_of_match); > > static struct platform_driver tegra_devfreq_driver = { > .probe = tegra_devfreq_probe, > - .remove = tegra_devfreq_remove, > .driver = { > .name = "tegra-devfreq", > .of_match_table = tegra_devfreq_of_match, > It is more readable than before. Thanks. Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c index 10661eb2aed8..d83fdc2713ed 100644 --- a/drivers/devfreq/tegra30-devfreq.c +++ b/drivers/devfreq/tegra30-devfreq.c @@ -178,7 +178,6 @@ struct tegra_devfreq_soc_data { struct tegra_devfreq { struct devfreq *devfreq; - struct opp_table *opp_table; struct reset_control *reset; struct clk *clock; @@ -789,6 +788,39 @@ static struct devfreq_governor tegra_devfreq_governor = { .event_handler = tegra_governor_event_handler, }; +static void devm_tegra_devfreq_deinit_hw(void *data) +{ + struct tegra_devfreq *tegra = data; + + reset_control_reset(tegra->reset); + clk_disable_unprepare(tegra->clock); +} + +static int devm_tegra_devfreq_init_hw(struct device *dev, + struct tegra_devfreq *tegra) +{ + int err; + + err = clk_prepare_enable(tegra->clock); + if (err) { + dev_err(dev, "Failed to prepare and enable ACTMON clock\n"); + return err; + } + + err = devm_add_action_or_reset(dev, devm_tegra_devfreq_deinit_hw, + tegra); + if (err) + return err; + + err = reset_control_reset(tegra->reset); + if (err) { + dev_err(dev, "Failed to reset hardware: %d\n", err); + return err; + } + + return err; +} + static int tegra_devfreq_probe(struct platform_device *pdev) { u32 hw_version = BIT(tegra_sku_info.soc_speedo_id); @@ -842,38 +874,26 @@ static int tegra_devfreq_probe(struct platform_device *pdev) return err; } - tegra->opp_table = dev_pm_opp_set_supported_hw(&pdev->dev, - &hw_version, 1); - err = PTR_ERR_OR_ZERO(tegra->opp_table); + err = devm_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1); if (err) { dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err); return err; } - err = dev_pm_opp_of_add_table_noclk(&pdev->dev, 0); + err = devm_pm_opp_of_add_table_noclk(&pdev->dev, 0); if (err) { dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err); - goto put_hw; - } - - err = clk_prepare_enable(tegra->clock); - if (err) { - dev_err(&pdev->dev, - "Failed to prepare and enable ACTMON clock\n"); - goto remove_table; + return err; } - err = reset_control_reset(tegra->reset); - if (err) { - dev_err(&pdev->dev, "Failed to reset hardware: %d\n", err); - goto disable_clk; - } + err = devm_tegra_devfreq_init_hw(&pdev->dev, tegra); + if (err) + return err; rate = clk_round_rate(tegra->emc_clock, ULONG_MAX); if (rate < 0) { dev_err(&pdev->dev, "Failed to round clock rate: %ld\n", rate); - err = rate; - goto disable_clk; + return rate; } tegra->max_freq = rate / KHZ; @@ -892,52 +912,18 @@ static int tegra_devfreq_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&tegra->cpufreq_update_work, tegra_actmon_delayed_update); - err = devfreq_add_governor(&tegra_devfreq_governor); + err = devm_devfreq_add_governor(&pdev->dev, &tegra_devfreq_governor); if (err) { dev_err(&pdev->dev, "Failed to add governor: %d\n", err); - goto remove_opps; + return err; } tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock); - devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile, - "tegra_actmon", NULL); - if (IS_ERR(devfreq)) { - err = PTR_ERR(devfreq); - goto remove_governor; - } - - return 0; - -remove_governor: - devfreq_remove_governor(&tegra_devfreq_governor); - -remove_opps: - dev_pm_opp_remove_all_dynamic(&pdev->dev); - - reset_control_reset(tegra->reset); -disable_clk: - clk_disable_unprepare(tegra->clock); -remove_table: - dev_pm_opp_of_remove_table(&pdev->dev); -put_hw: - dev_pm_opp_put_supported_hw(tegra->opp_table); - - return err; -} - -static int tegra_devfreq_remove(struct platform_device *pdev) -{ - struct tegra_devfreq *tegra = platform_get_drvdata(pdev); - - devfreq_remove_device(tegra->devfreq); - devfreq_remove_governor(&tegra_devfreq_governor); - - reset_control_reset(tegra->reset); - clk_disable_unprepare(tegra->clock); - - dev_pm_opp_of_remove_table(&pdev->dev); - dev_pm_opp_put_supported_hw(tegra->opp_table); + devfreq = devm_devfreq_add_device(&pdev->dev, &tegra_devfreq_profile, + "tegra_actmon", NULL); + if (IS_ERR(devfreq)) + return PTR_ERR(devfreq); return 0; } @@ -967,7 +953,6 @@ MODULE_DEVICE_TABLE(of, tegra_devfreq_of_match); static struct platform_driver tegra_devfreq_driver = { .probe = tegra_devfreq_probe, - .remove = tegra_devfreq_remove, .driver = { .name = "tegra-devfreq", .of_match_table = tegra_devfreq_of_match,
Use resource-managed API helpers to simplify driver's probe() function, making code cleaner. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/devfreq/tegra30-devfreq.c | 107 +++++++++++++----------------- 1 file changed, 46 insertions(+), 61 deletions(-)