diff mbox series

[v7,05/13] arm64: dts: qcom: sc7180: Use QMP property to control load state

Message ID 1631800770-371-6-git-send-email-sibis@codeaurora.org (mailing list archive)
State Accepted
Headers show
Series Use qmp_send to update co-processor load state | expand

Commit Message

Sibi Sankar Sept. 16, 2021, 1:59 p.m. UTC 
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7180 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

Comments

Bjorn Andersson Sept. 27, 2021, 8:53 p.m. UTC | #1 
On Thu, 16 Sep 2021 19:29:22 +0530, Sibi Sankar wrote:
> Use the Qualcomm Mailbox Protocol (QMP) property to control the load
> state resources on SC7180 SoCs and drop deprecated power-domains exposed
> by AOSS QMP node.
> 
> 

Applied, thanks!

[05/13] arm64: dts: qcom: sc7180: Use QMP property to control load state
        commit: 135780456218e98172f3bca1e1af4ae6646d4bbe

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index c8921e2d6480..24ee106b933a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,7 +15,6 @@ 
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1922,14 +1921,15 @@ 
 			clock-names = "iface", "bus", "nav", "snoc_axi",
 				      "mnoc_axi", "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
+			power-domains = <&rpmhpd SC7180_CX>,
 					<&rpmhpd SC7180_MX>,
 					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -3224,7 +3224,6 @@ 
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {