diff mbox series

[v3] workaround regression in ina2xx introduced by cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()")

Message ID 20210926171711.194901-1-drhunter95@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v3] workaround regression in ina2xx introduced by cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()") | expand

Commit Message

Iain Hunter Sept. 26, 2021, 5:16 p.m. UTC
From: Iain Hunter <iain@hunterembedded.co.uk>

That change adds an error check to avoid saturation during multiplication
to calculate nano seconds in timespec64_to_ns().
In ina2xx_capture_thread() a timespec64 structure is used to calculate
the delta time until the next sample time. This delta can be negative if
the next sample time was in the past. In the -1 case timespec64_to_ns()
now clamps the -1 second value to KTIME_MAX. This essentially puts ina2xx
thread to sleep forever.
Proposed patch is to split the functionality in the loop into two parts:
1 do while loop only does the test to see if the next sample time is in 
the future or in the past. If it is in the past it will be skipped
and the sample time incremented until it is in the future. This 
comparision can be done with timespec64_compare() as we are only 
interested in the sign being positive or negative.
2 after do while loop we know that next is later than now and so delta is
guaranteed to be positive. This means timespec64_to_ns() can be safely 
used.

Signed-off-by: Iain Hunter <iain@hunterembedded.co.uk>

Fixes: cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()")
---
 drivers/iio/adc/ina2xx-adc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Thomas Gleixner Sept. 26, 2021, 9:18 p.m. UTC | #1
On Sun, Sep 26 2021 at 18:16, Iain Hunter wrote:
> --- a/drivers/iio/adc/ina2xx-adc.c
> +++ b/drivers/iio/adc/ina2xx-adc.c
> @@ -817,10 +817,10 @@ static int ina2xx_capture_thread(void *data)
>  		 */
>  		do {
>  			timespec64_add_ns(&next, 1000 * sampling_us);
> -			delta = timespec64_sub(next, now);
> -			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
> -		} while (delay_us <= 0);
> +		} while (timespec64_compare(&next, &now) < 0);
>  
> +		delta = timespec64_sub(next, now);
> +		delay_us = div_s64(timespec64_to_ns(&delta), 1000);

This whole timespec dance does not make any sense and can be completely
avoided by using just scalar nanoseconds. Untested patch below.

Thanks,

        tglx
---
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -775,7 +775,7 @@ static int ina2xx_capture_thread(void *d
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
 	int sampling_us = SAMPLING_PERIOD(chip);
 	int ret;
-	struct timespec64 next, now, delta;
+	ktime_t next, now, delta;
 	s64 delay_us;
 
 	/*
@@ -785,7 +785,7 @@ static int ina2xx_capture_thread(void *d
 	if (!chip->allow_async_readout)
 		sampling_us -= 200;
 
-	ktime_get_ts64(&next);
+	next = ktime_get();
 
 	do {
 		while (!chip->allow_async_readout) {
@@ -798,7 +798,7 @@ static int ina2xx_capture_thread(void *d
 			 * reset the reference timestamp.
 			 */
 			if (ret == 0)
-				ktime_get_ts64(&next);
+				next = ktime_get();
 			else
 				break;
 		}
@@ -807,7 +807,7 @@ static int ina2xx_capture_thread(void *d
 		if (ret < 0)
 			return ret;
 
-		ktime_get_ts64(&now);
+		now = ktime_get();
 
 		/*
 		 * Advance the timestamp for the next poll by one sampling
@@ -816,11 +816,10 @@ static int ina2xx_capture_thread(void *d
 		 * multiple times, i.e. samples are dropped.
 		 */
 		do {
-			timespec64_add_ns(&next, 1000 * sampling_us);
-			delta = timespec64_sub(next, now);
-			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
-		} while (delay_us <= 0);
+			next = ktime_add_us(next, sampling_us);
+		} while (next <= now);
 
+		delay_us = ktime_to_us(ktime_sub(next, now));
 		usleep_range(delay_us, (delay_us * 3) >> 1);
 
 	} while (!kthread_should_stop());
Jonathan Cameron Sept. 30, 2021, 4:18 p.m. UTC | #2
On Sun, 26 Sep 2021 23:18:42 +0200
Thomas Gleixner <tglx@linutronix.de> wrote:

> On Sun, Sep 26 2021 at 18:16, Iain Hunter wrote:
> > --- a/drivers/iio/adc/ina2xx-adc.c
> > +++ b/drivers/iio/adc/ina2xx-adc.c
> > @@ -817,10 +817,10 @@ static int ina2xx_capture_thread(void *data)
> >  		 */
> >  		do {
> >  			timespec64_add_ns(&next, 1000 * sampling_us);
> > -			delta = timespec64_sub(next, now);
> > -			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
> > -		} while (delay_us <= 0);
> > +		} while (timespec64_compare(&next, &now) < 0);
> >  
> > +		delta = timespec64_sub(next, now);
> > +		delay_us = div_s64(timespec64_to_ns(&delta), 1000);  
> 
> This whole timespec dance does not make any sense and can be completely
> avoided by using just scalar nanoseconds. Untested patch below.
> 
> Thanks,
> 
>         tglx

Thanks Thomas.

Iain could you test this approach?

Thanks,

Jonathan

> ---
> --- a/drivers/iio/adc/ina2xx-adc.c
> +++ b/drivers/iio/adc/ina2xx-adc.c
> @@ -775,7 +775,7 @@ static int ina2xx_capture_thread(void *d
>  	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
>  	int sampling_us = SAMPLING_PERIOD(chip);
>  	int ret;
> -	struct timespec64 next, now, delta;
> +	ktime_t next, now, delta;
>  	s64 delay_us;
>  
>  	/*
> @@ -785,7 +785,7 @@ static int ina2xx_capture_thread(void *d
>  	if (!chip->allow_async_readout)
>  		sampling_us -= 200;
>  
> -	ktime_get_ts64(&next);
> +	next = ktime_get();
>  
>  	do {
>  		while (!chip->allow_async_readout) {
> @@ -798,7 +798,7 @@ static int ina2xx_capture_thread(void *d
>  			 * reset the reference timestamp.
>  			 */
>  			if (ret == 0)
> -				ktime_get_ts64(&next);
> +				next = ktime_get();
>  			else
>  				break;
>  		}
> @@ -807,7 +807,7 @@ static int ina2xx_capture_thread(void *d
>  		if (ret < 0)
>  			return ret;
>  
> -		ktime_get_ts64(&now);
> +		now = ktime_get();
>  
>  		/*
>  		 * Advance the timestamp for the next poll by one sampling
> @@ -816,11 +816,10 @@ static int ina2xx_capture_thread(void *d
>  		 * multiple times, i.e. samples are dropped.
>  		 */
>  		do {
> -			timespec64_add_ns(&next, 1000 * sampling_us);
> -			delta = timespec64_sub(next, now);
> -			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
> -		} while (delay_us <= 0);
> +			next = ktime_add_us(next, sampling_us);
> +		} while (next <= now);
>  
> +		delay_us = ktime_to_us(ktime_sub(next, now));
>  		usleep_range(delay_us, (delay_us * 3) >> 1);
>  
>  	} while (!kthread_should_stop());
> 
>
Jonathan Cameron Sept. 30, 2021, 4:20 p.m. UTC | #3
On Thu, 30 Sep 2021 17:18:44 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Sun, 26 Sep 2021 23:18:42 +0200
> Thomas Gleixner <tglx@linutronix.de> wrote:
> 
> > On Sun, Sep 26 2021 at 18:16, Iain Hunter wrote:  
> > > --- a/drivers/iio/adc/ina2xx-adc.c
> > > +++ b/drivers/iio/adc/ina2xx-adc.c
> > > @@ -817,10 +817,10 @@ static int ina2xx_capture_thread(void *data)
> > >  		 */
> > >  		do {
> > >  			timespec64_add_ns(&next, 1000 * sampling_us);
> > > -			delta = timespec64_sub(next, now);
> > > -			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
> > > -		} while (delay_us <= 0);
> > > +		} while (timespec64_compare(&next, &now) < 0);
> > >  
> > > +		delta = timespec64_sub(next, now);
> > > +		delay_us = div_s64(timespec64_to_ns(&delta), 1000);    
> > 
> > This whole timespec dance does not make any sense and can be completely
> > avoided by using just scalar nanoseconds. Untested patch below.
> > 
> > Thanks,
> > 
> >         tglx  
> 
> Thanks Thomas.
> 
> Iain could you test this approach?

Ah. Just seen v4, so I guess you did.

Thanks,

J
> 
> Thanks,
> 
> Jonathan
> 
> > ---
> > --- a/drivers/iio/adc/ina2xx-adc.c
> > +++ b/drivers/iio/adc/ina2xx-adc.c
> > @@ -775,7 +775,7 @@ static int ina2xx_capture_thread(void *d
> >  	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
> >  	int sampling_us = SAMPLING_PERIOD(chip);
> >  	int ret;
> > -	struct timespec64 next, now, delta;
> > +	ktime_t next, now, delta;
> >  	s64 delay_us;
> >  
> >  	/*
> > @@ -785,7 +785,7 @@ static int ina2xx_capture_thread(void *d
> >  	if (!chip->allow_async_readout)
> >  		sampling_us -= 200;
> >  
> > -	ktime_get_ts64(&next);
> > +	next = ktime_get();
> >  
> >  	do {
> >  		while (!chip->allow_async_readout) {
> > @@ -798,7 +798,7 @@ static int ina2xx_capture_thread(void *d
> >  			 * reset the reference timestamp.
> >  			 */
> >  			if (ret == 0)
> > -				ktime_get_ts64(&next);
> > +				next = ktime_get();
> >  			else
> >  				break;
> >  		}
> > @@ -807,7 +807,7 @@ static int ina2xx_capture_thread(void *d
> >  		if (ret < 0)
> >  			return ret;
> >  
> > -		ktime_get_ts64(&now);
> > +		now = ktime_get();
> >  
> >  		/*
> >  		 * Advance the timestamp for the next poll by one sampling
> > @@ -816,11 +816,10 @@ static int ina2xx_capture_thread(void *d
> >  		 * multiple times, i.e. samples are dropped.
> >  		 */
> >  		do {
> > -			timespec64_add_ns(&next, 1000 * sampling_us);
> > -			delta = timespec64_sub(next, now);
> > -			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
> > -		} while (delay_us <= 0);
> > +			next = ktime_add_us(next, sampling_us);
> > +		} while (next <= now);
> >  
> > +		delay_us = ktime_to_us(ktime_sub(next, now));
> >  		usleep_range(delay_us, (delay_us * 3) >> 1);
> >  
> >  	} while (!kthread_should_stop());
> > 
> >   
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index a4b2ff9e0..661bcf707 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -817,10 +817,10 @@  static int ina2xx_capture_thread(void *data)
 		 */
 		do {
 			timespec64_add_ns(&next, 1000 * sampling_us);
-			delta = timespec64_sub(next, now);
-			delay_us = div_s64(timespec64_to_ns(&delta), 1000);
-		} while (delay_us <= 0);
+		} while (timespec64_compare(&next, &now) < 0);
 
+		delta = timespec64_sub(next, now);
+		delay_us = div_s64(timespec64_to_ns(&delta), 1000);
 		usleep_range(delay_us, (delay_us * 3) >> 1);
 
 	} while (!kthread_should_stop());