diff mbox series

[11/11] arm64: dts: qcom: sm7225: Add device tree for Fairphone 4

Message ID 20211003083141.613509-12-luca@z3ntu.xyz (mailing list archive)
State Superseded
Headers show
Series Initial Fairphone 4 support | expand

Commit Message

Luca Weiss Oct. 3, 2021, 8:31 a.m. UTC 
Add device tree for the Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225) which is basically sm6350.

Currently supported are UART, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), regulators and
USB.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 322 ++++++++++++++++++
 2 files changed, 323 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts

Comments

Konrad Dybcio Oct. 3, 2021, 11:35 a.m. UTC | #1 
On 03.10.2021 10:31, Luca Weiss wrote:
> Add device tree for the Fairphone 4 smartphone which is based on
> Snapdragon 750G (sm7225) which is basically sm6350.
>
> Currently supported are UART, physical buttons (power & volume), screen
> (based on simple-framebuffer set up by the bootloader), regulators and
> USB.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> [...]

> +
> +&pm6350_gpios {
> +	gpio_keys_pins: gpio-keys-pins {

'pin' singular, I guess


> +		pinconf {
> +			pins = "gpio2";
> +			function = PMIC_GPIO_FUNC_NORMAL;
> +			bias-pull-up;
> +			input-enable;
> +			power-source = <0>;
> +		};

pinconf {} is not necessary


[...]


Other than that:


Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>


Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 59ece83abad0..9ed189e9c197 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -85,6 +85,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
new file mode 100644
index 000000000000..6d509b2bdabe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -0,0 +1,322 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7225.dtsi"
+#include "pm6350.dtsi"
+
+/ {
+	model = "Fairphone 4";
+	compatible = "fairphone,fp4", "qcom,sm7225";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,board-id = <8 32>;
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@a000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xa0000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&apps_rsc {
+	pm6350-rpmh-regulators {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s2a: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		vreg_l2a: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm6150l-rpmh-regulators {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s8e: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+		};
+
+		vreg_l1e: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4e: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9e: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11e: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&pm6350_gpios {
+	gpio_keys_pins: gpio-keys-pins {
+		pinconf {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			bias-pull-up;
+			input-enable;
+			power-source = <0>;
+		};
+	};
+};
+
+&pm6350_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>, <56 2>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l18a>;
+	vdda-pll-supply = <&vreg_l2a>;
+	vdda-phy-dpdm-supply = <&vreg_l3a>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l22a>;
+	vdda-pll-supply = <&vreg_l16a>;
+};