| Message ID | 20211006223603.18858-4-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Multiple improvement for qca8337 switch | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Series has a cover letter |
| netdev/fixes_present | success | Fixes tag not required for -next series |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | success | CCed 6 of 6 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | No Fixes tag |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 9 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | No static functions without inline keyword in header files |
On Thu, Oct 07, 2021 at 12:35:53AM +0200, Ansuel Smith wrote: > >From original QCA source code the port was set to prefer master as port > type in 1000BASE-T mode. Apply the same settings also here. > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 71237a4e85a3..851d47b8a331 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -1325,6 +1325,9 @@ static int qca83xx_config_init(struct phy_device *phydev) at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, QCA8327_DEBUG_MANU_CTRL_EN, 0); + /* Following original QCA sourcecode set port to prefer master */ + phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); + return 0; }
From original QCA source code the port was set to prefer master as port type in 1000BASE-T mode. Apply the same settings also here. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/phy/at803x.c | 3 +++ 1 file changed, 3 insertions(+)