[v3,8/8] dt-bindings: adin1100: Add binding for ADIN1100 Ethernet PHY

Commit Message

Alexandru Tachici Oct. 11, 2021, 2:22 p.m. UTC

From: Alexandru Tachici <[e-mail]>

DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.

Signed-off-by: Alexandru Tachici <[e-mail]>
---
 .../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml

Comments

Rob Herring (Arm) Oct. 11, 2021, 11:13 p.m. UTC | #1

On Mon, 11 Oct 2021 17:22:15 +0300, [e-mail] wrote:
> From: Alexandru Tachici <[e-mail]>
> 
> DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.
> 
> Signed-off-by: Alexandru Tachici <[e-mail]>
> ---
>  .../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.yaml: 'oneOf' conditional failed, one must be fixed:
	'unevaluatedProperties' is a required property
	'additionalProperties' is a required property
	hint: A schema with a "$ref" to another schema either can define all properties used and use "additionalProperties" or can use "unevaluatedProperties"
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.yaml: 'anyOf' conditional failed, one must be fixed:
	'properties' is a required property
	'patternProperties' is a required property
	hint: Metaschema for devicetree binding documentation
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/net/adi,adin1100.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.example.dt.yaml: ethernet: '10base-t1l-2.4vpp' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/dt-core.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1539350

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Rob Herring (Arm) Oct. 12, 2021, 12:47 a.m. UTC | #2

On Mon, Oct 11, 2021 at 05:22:15PM +0300, [e-mail] wrote:
> From: Alexandru Tachici <[e-mail]>
> 
> DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.
> 
> Signed-off-by: Alexandru Tachici <[e-mail]>
> ---
>  .../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
> new file mode 100644
> index 000000000000..7f98ea8fdf51
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
> @@ -0,0 +1,30 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/adi,adin1100.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADIN1100 PHY
> +
> +maintainers:
> +  - Alexandru Tachici <[e-mail]>
> +
> +description:
> +  Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY

This schema doesn't do anything. ethernet-phy.yaml is already applied 
based on the node name and you haven't added any phy specific 
properties.

> +
> +allOf:
> +  - $ref: ethernet-phy.yaml#
> +
> +examples:
> +  - |
> +    ethernet {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        10base-t1l-2.4vpp = <0>;
> +
> +        ethernet-phy@0 {
> +            compatible = "ethernet-phy-id0283.bc81";
> +            reg = <0>;
> +        };
> +    };
> -- 
> 2.25.1
> 
>

Patch

diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
new file mode 100644
index 000000000000..7f98ea8fdf51
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
@@ -0,0 +1,30 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1100 PHY
+
+maintainers:
+  - Alexandru Tachici <[e-mail]>
+
+description:
+  Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+examples:
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        10base-t1l-2.4vpp = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id0283.bc81";
+            reg = <0>;
+        };
+    };