| Message ID | 20211014034819.2283-7-jammy_huang@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add aspeed-jpeg support for aspeed-video | expand |
Dear Jammy, Am 14.10.21 um 05:48 schrieb Jammy Huang: > updated as below: > > Caputre: Capture > Mode : Direct fetch > VGA bpp mode : 32 > Signal : Unlock > Width : 1920 > Height : 1080 > FRC : 30 > > Compression: > Format : JPEG > Subsampling : 444 > Quality : 0 > HQ Mode : N/A > HQ Quality : 0 > Mode : N/A > > Performance: > Frame# : 0 > Frame Duration(ms) : > Now : 0 > Min : 0 > Max : 0 > FPS : 0 Do you have output with non-zero values? ;-) On what device did you test this? > Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> > --- > drivers/media/platform/aspeed-video.c | 41 +++++++++++++++++++++++++-- > 1 file changed, 38 insertions(+), 3 deletions(-) > > diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c > index e1031fd09ac6..f2e5c49ee906 100644 > --- a/drivers/media/platform/aspeed-video.c > +++ b/drivers/media/platform/aspeed-video.c > @@ -464,6 +464,9 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = { > }, > }; > > +static const char * const compress_mode_str[] = {"DCT Only", > + "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; > + > static unsigned int debug; > > static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420) > @@ -1077,8 +1080,6 @@ static void aspeed_video_set_resolution(struct aspeed_video *video) > > static void aspeed_video_update_regs(struct aspeed_video *video) > { > - static const char * const compress_mode_str[] = {"DCT Only", > - "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; > u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) | > FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) | > FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) | > @@ -1795,9 +1796,29 @@ static const struct vb2_ops aspeed_video_vb2_ops = { > static int aspeed_video_debugfs_show(struct seq_file *s, void *data) > { > struct aspeed_video *v = s->private; > + u32 val08; Why does `08` refer to? > > seq_puts(s, "\n"); > > + val08 = aspeed_video_read(v, VE_CTRL); > + seq_puts(s, "Caputre:\n"); > + if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) { > + seq_printf(s, " %-20s:\tDirect fetch\n", "Mode"); > + seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode", > + FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32"); > + } else { > + seq_printf(s, " %-20s:\tSync\n", "Mode"); > + seq_printf(s, " %-20s:\t%s\n", "Video source", > + FIELD_GET(VE_CTRL_SOURCE, val08) ? > + "external" : "internal"); > + seq_printf(s, " %-20s:\t%s\n", "DE source", > + FIELD_GET(VE_CTRL_INT_DE, val08) ? > + "internal" : "external"); > + seq_printf(s, " %-20s:\t%s\n", "Cursor overlay", > + FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ? > + "Without" : "With"); > + } > + > seq_printf(s, " %-20s:\t%s\n", "Signal", > v->v4l2_input_status ? "Unlock" : "Lock"); > seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width); > @@ -1806,6 +1827,21 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data) > > seq_puts(s, "\n"); > > + seq_puts(s, "Compression:\n"); > + seq_printf(s, " %-20s:\t%s\n", "Format", > + v->partial_jpeg ? "Aspeed" : "JPEG"); > + seq_printf(s, " %-20s:\t%s\n", "Subsampling", > + v->yuv420 ? "420" : "444"); > + seq_printf(s, " %-20s:\t%d\n", "Quality", v->jpeg_quality); > + seq_printf(s, " %-20s:\t%s\n", "HQ Mode", > + v->partial_jpeg ? (v->hq_mode ? "on" : "off") : "N/A"); > + seq_printf(s, " %-20s:\t%d\n", "HQ Quality", v->jpeg_hq_quality); > + seq_printf(s, " %-20s:\t%s\n", "Mode", > + v->partial_jpeg ? compress_mode_str[v->compression_mode] > + : "N/A"); > + > + seq_puts(s, "\n"); > + > seq_puts(s, "Performance:\n"); > seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence); > seq_printf(s, " %-20s:\n", "Frame Duration(ms)"); Remove the colon, and add a space before (? > @@ -1814,7 +1850,6 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data) > seq_printf(s, " %-18s:\t%d\n", "Max", v->perf.duration_max); > seq_printf(s, " %-20s:\t%d\n", "FPS", 1000/(v->perf.totaltime/v->sequence)); > > - > return 0; > } Kind regards, Paul
Dear Jammy, Am 14.10.21 um 08:54 schrieb Paul Menzel: > Am 14.10.21 um 05:48 schrieb Jammy Huang: > media: aspeed: richer debugfs It’d be great if you used a statement by adding a verb in imperative mood [1]. Maybe: > Extend debug message or > Add more debug log messages >> updated as below: >> >> Caputre: > > Capture > >> Mode : Direct fetch >> VGA bpp mode : 32 >> Signal : Unlock >> Width : 1920 >> Height : 1080 >> FRC : 30 >> >> Compression: >> Format : JPEG >> Subsampling : 444 >> Quality : 0 >> HQ Mode : N/A >> HQ Quality : 0 >> Mode : N/A >> >> Performance: >> Frame# : 0 >> Frame Duration(ms) : >> Now : 0 >> Min : 0 >> Max : 0 >> FPS : 0 > > Do you have output with non-zero values? ;-) > > On what device did you test this? > >> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> >> --- >> drivers/media/platform/aspeed-video.c | 41 +++++++++++++++++++++++++-- >> 1 file changed, 38 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/media/platform/aspeed-video.c >> b/drivers/media/platform/aspeed-video.c >> index e1031fd09ac6..f2e5c49ee906 100644 >> --- a/drivers/media/platform/aspeed-video.c >> +++ b/drivers/media/platform/aspeed-video.c >> @@ -464,6 +464,9 @@ static const struct v4l2_dv_timings_cap >> aspeed_video_timings_cap = { >> }, >> }; >> +static const char * const compress_mode_str[] = {"DCT Only", >> + "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; >> + >> static unsigned int debug; >> static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420) >> @@ -1077,8 +1080,6 @@ static void aspeed_video_set_resolution(struct >> aspeed_video *video) >> static void aspeed_video_update_regs(struct aspeed_video *video) >> { >> - static const char * const compress_mode_str[] = {"DCT Only", >> - "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; >> u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, >> video->jpeg_quality) | >> FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) | >> FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) | >> @@ -1795,9 +1796,29 @@ static const struct vb2_ops >> aspeed_video_vb2_ops = { >> static int aspeed_video_debugfs_show(struct seq_file *s, void *data) >> { >> struct aspeed_video *v = s->private; >> + u32 val08; > > Why does `08` refer to? > >> seq_puts(s, "\n"); >> + val08 = aspeed_video_read(v, VE_CTRL); >> + seq_puts(s, "Caputre:\n"); >> + if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) { >> + seq_printf(s, " %-20s:\tDirect fetch\n", "Mode"); >> + seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode", >> + FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32"); >> + } else { >> + seq_printf(s, " %-20s:\tSync\n", "Mode"); >> + seq_printf(s, " %-20s:\t%s\n", "Video source", >> + FIELD_GET(VE_CTRL_SOURCE, val08) ? >> + "external" : "internal"); >> + seq_printf(s, " %-20s:\t%s\n", "DE source", >> + FIELD_GET(VE_CTRL_INT_DE, val08) ? >> + "internal" : "external"); >> + seq_printf(s, " %-20s:\t%s\n", "Cursor overlay", >> + FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ? >> + "Without" : "With"); >> + } >> + >> seq_printf(s, " %-20s:\t%s\n", "Signal", >> v->v4l2_input_status ? "Unlock" : "Lock"); >> seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width); >> @@ -1806,6 +1827,21 @@ static int aspeed_video_debugfs_show(struct >> seq_file *s, void *data) >> seq_puts(s, "\n"); >> + seq_puts(s, "Compression:\n"); >> + seq_printf(s, " %-20s:\t%s\n", "Format", >> + v->partial_jpeg ? "Aspeed" : "JPEG"); >> + seq_printf(s, " %-20s:\t%s\n", "Subsampling", >> + v->yuv420 ? "420" : "444"); >> + seq_printf(s, " %-20s:\t%d\n", "Quality", v->jpeg_quality); >> + seq_printf(s, " %-20s:\t%s\n", "HQ Mode", >> + v->partial_jpeg ? (v->hq_mode ? "on" : "off") : "N/A"); >> + seq_printf(s, " %-20s:\t%d\n", "HQ Quality", v->jpeg_hq_quality); >> + seq_printf(s, " %-20s:\t%s\n", "Mode", >> + v->partial_jpeg ? compress_mode_str[v->compression_mode] >> + : "N/A"); >> + >> + seq_puts(s, "\n"); >> + >> seq_puts(s, "Performance:\n"); >> seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence); >> seq_printf(s, " %-20s:\n", "Frame Duration(ms)"); > > Remove the colon, and add a space before (? > >> @@ -1814,7 +1850,6 @@ static int aspeed_video_debugfs_show(struct >> seq_file *s, void *data) >> seq_printf(s, " %-18s:\t%d\n", "Max", v->perf.duration_max); >> seq_printf(s, " %-20s:\t%d\n", "FPS", >> 1000/(v->perf.totaltime/v->sequence)); >> - >> return 0; >> } Kind regards, Paul [1]: https://chris.beams.io/posts/git-commit/
Dear Paul, Thanks for you help. I will have an updated patch later accordingly. On 2021/10/14 下午 02:57, Paul Menzel wrote: > Dear Jammy, > > > Am 14.10.21 um 08:54 schrieb Paul Menzel: > >> Am 14.10.21 um 05:48 schrieb Jammy Huang: >> media: aspeed: richer debugfs > It’d be great if you used a statement by adding a verb in imperative > mood [1]. Maybe: > >> Extend debug message > or > >> Add more debug log messages >>> updated as below: >>> >>> Caputre: >> Capture >> >>> Mode : Direct fetch >>> VGA bpp mode : 32 >>> Signal : Unlock >>> Width : 1920 >>> Height : 1080 >>> FRC : 30 >>> >>> Compression: >>> Format : JPEG >>> Subsampling : 444 >>> Quality : 0 >>> HQ Mode : N/A >>> HQ Quality : 0 >>> Mode : N/A >>> >>> Performance: >>> Frame# : 0 >>> Frame Duration(ms) : >>> Now : 0 >>> Min : 0 >>> Max : 0 >>> FPS : 0 >> Do you have output with non-zero values? ;-) >> >> On what device did you test this? >> >>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> >>> --- >>> drivers/media/platform/aspeed-video.c | 41 +++++++++++++++++++++++++-- >>> 1 file changed, 38 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/media/platform/aspeed-video.c >>> b/drivers/media/platform/aspeed-video.c >>> index e1031fd09ac6..f2e5c49ee906 100644 >>> --- a/drivers/media/platform/aspeed-video.c >>> +++ b/drivers/media/platform/aspeed-video.c >>> @@ -464,6 +464,9 @@ static const struct v4l2_dv_timings_cap >>> aspeed_video_timings_cap = { >>> }, >>> }; >>> +static const char * const compress_mode_str[] = {"DCT Only", >>> + "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; >>> + >>> static unsigned int debug; >>> static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420) >>> @@ -1077,8 +1080,6 @@ static void aspeed_video_set_resolution(struct >>> aspeed_video *video) >>> static void aspeed_video_update_regs(struct aspeed_video *video) >>> { >>> - static const char * const compress_mode_str[] = {"DCT Only", >>> - "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; >>> u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, >>> video->jpeg_quality) | >>> FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) | >>> FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) | >>> @@ -1795,9 +1796,29 @@ static const struct vb2_ops >>> aspeed_video_vb2_ops = { >>> static int aspeed_video_debugfs_show(struct seq_file *s, void *data) >>> { >>> struct aspeed_video *v = s->private; >>> + u32 val08; >> Why does `08` refer to? >> >>> seq_puts(s, "\n"); >>> + val08 = aspeed_video_read(v, VE_CTRL); >>> + seq_puts(s, "Caputre:\n"); >>> + if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) { >>> + seq_printf(s, " %-20s:\tDirect fetch\n", "Mode"); >>> + seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode", >>> + FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32"); >>> + } else { >>> + seq_printf(s, " %-20s:\tSync\n", "Mode"); >>> + seq_printf(s, " %-20s:\t%s\n", "Video source", >>> + FIELD_GET(VE_CTRL_SOURCE, val08) ? >>> + "external" : "internal"); >>> + seq_printf(s, " %-20s:\t%s\n", "DE source", >>> + FIELD_GET(VE_CTRL_INT_DE, val08) ? >>> + "internal" : "external"); >>> + seq_printf(s, " %-20s:\t%s\n", "Cursor overlay", >>> + FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ? >>> + "Without" : "With"); >>> + } >>> + >>> seq_printf(s, " %-20s:\t%s\n", "Signal", >>> v->v4l2_input_status ? "Unlock" : "Lock"); >>> seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width); >>> @@ -1806,6 +1827,21 @@ static int aspeed_video_debugfs_show(struct >>> seq_file *s, void *data) >>> seq_puts(s, "\n"); >>> + seq_puts(s, "Compression:\n"); >>> + seq_printf(s, " %-20s:\t%s\n", "Format", >>> + v->partial_jpeg ? "Aspeed" : "JPEG"); >>> + seq_printf(s, " %-20s:\t%s\n", "Subsampling", >>> + v->yuv420 ? "420" : "444"); >>> + seq_printf(s, " %-20s:\t%d\n", "Quality", v->jpeg_quality); >>> + seq_printf(s, " %-20s:\t%s\n", "HQ Mode", >>> + v->partial_jpeg ? (v->hq_mode ? "on" : "off") : "N/A"); >>> + seq_printf(s, " %-20s:\t%d\n", "HQ Quality", v->jpeg_hq_quality); >>> + seq_printf(s, " %-20s:\t%s\n", "Mode", >>> + v->partial_jpeg ? compress_mode_str[v->compression_mode] >>> + : "N/A"); >>> + >>> + seq_puts(s, "\n"); >>> + >>> seq_puts(s, "Performance:\n"); >>> seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence); >>> seq_printf(s, " %-20s:\n", "Frame Duration(ms)"); >> Remove the colon, and add a space before (? >> >>> @@ -1814,7 +1850,6 @@ static int aspeed_video_debugfs_show(struct >>> seq_file *s, void *data) >>> seq_printf(s, " %-18s:\t%d\n", "Max", v->perf.duration_max); >>> seq_printf(s, " %-20s:\t%d\n", "FPS", >>> 1000/(v->perf.totaltime/v->sequence)); >>> - >>> return 0; >>> } > > Kind regards, > > Paul > > > [1]: https://chris.beams.io/posts/git-commit/
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c index e1031fd09ac6..f2e5c49ee906 100644 --- a/drivers/media/platform/aspeed-video.c +++ b/drivers/media/platform/aspeed-video.c @@ -464,6 +464,9 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = { }, }; +static const char * const compress_mode_str[] = {"DCT Only", + "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; + static unsigned int debug; static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420) @@ -1077,8 +1080,6 @@ static void aspeed_video_set_resolution(struct aspeed_video *video) static void aspeed_video_update_regs(struct aspeed_video *video) { - static const char * const compress_mode_str[] = {"DCT Only", - "DCT VQ mix 2-color", "DCT VQ mix 4-color"}; u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) | FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) | FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) | @@ -1795,9 +1796,29 @@ static const struct vb2_ops aspeed_video_vb2_ops = { static int aspeed_video_debugfs_show(struct seq_file *s, void *data) { struct aspeed_video *v = s->private; + u32 val08; seq_puts(s, "\n"); + val08 = aspeed_video_read(v, VE_CTRL); + seq_puts(s, "Caputre:\n"); + if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) { + seq_printf(s, " %-20s:\tDirect fetch\n", "Mode"); + seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode", + FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32"); + } else { + seq_printf(s, " %-20s:\tSync\n", "Mode"); + seq_printf(s, " %-20s:\t%s\n", "Video source", + FIELD_GET(VE_CTRL_SOURCE, val08) ? + "external" : "internal"); + seq_printf(s, " %-20s:\t%s\n", "DE source", + FIELD_GET(VE_CTRL_INT_DE, val08) ? + "internal" : "external"); + seq_printf(s, " %-20s:\t%s\n", "Cursor overlay", + FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ? + "Without" : "With"); + } + seq_printf(s, " %-20s:\t%s\n", "Signal", v->v4l2_input_status ? "Unlock" : "Lock"); seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width); @@ -1806,6 +1827,21 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data) seq_puts(s, "\n"); + seq_puts(s, "Compression:\n"); + seq_printf(s, " %-20s:\t%s\n", "Format", + v->partial_jpeg ? "Aspeed" : "JPEG"); + seq_printf(s, " %-20s:\t%s\n", "Subsampling", + v->yuv420 ? "420" : "444"); + seq_printf(s, " %-20s:\t%d\n", "Quality", v->jpeg_quality); + seq_printf(s, " %-20s:\t%s\n", "HQ Mode", + v->partial_jpeg ? (v->hq_mode ? "on" : "off") : "N/A"); + seq_printf(s, " %-20s:\t%d\n", "HQ Quality", v->jpeg_hq_quality); + seq_printf(s, " %-20s:\t%s\n", "Mode", + v->partial_jpeg ? compress_mode_str[v->compression_mode] + : "N/A"); + + seq_puts(s, "\n"); + seq_puts(s, "Performance:\n"); seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence); seq_printf(s, " %-20s:\n", "Frame Duration(ms)"); @@ -1814,7 +1850,6 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data) seq_printf(s, " %-18s:\t%d\n", "Max", v->perf.duration_max); seq_printf(s, " %-20s:\t%d\n", "FPS", 1000/(v->perf.totaltime/v->sequence)); - return 0; }
updated as below: Caputre: Mode : Direct fetch VGA bpp mode : 32 Signal : Unlock Width : 1920 Height : 1080 FRC : 30 Compression: Format : JPEG Subsampling : 444 Quality : 0 HQ Mode : N/A HQ Quality : 0 Mode : N/A Performance: Frame# : 0 Frame Duration(ms) : Now : 0 Min : 0 Max : 0 FPS : 0 Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> --- drivers/media/platform/aspeed-video.c | 41 +++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 3 deletions(-)