dt-bindings: adv748x: Convert bindings to json-schema

Message ID	20211012183324.717975-1-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State	Superseded
Delegated to:	Kieran Bingham
Headers	show Return-Path: <linux-renesas-soc-owner@kernel.org> From: =?utf-8?q?Niklas_S=C3=B6derlund?= <niklas.soderlund+renesas@ragnatech.se> To: Rob Herring <robh+dt@kernel.org>, Kieran Bingham <kieran.bingham@ideasonboard.com>, devicetree@vger.kernel.org, linux-media@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org, =?utf-8?q?Niklas_S=C3=B6derlund?= <niklas.soderlund+renesas@ragnatech.se> Subject: [PATCH] dt-bindings: adv748x: Convert bindings to json-schema Date: Tue, 12 Oct 2021 20:33:24 +0200 Message-Id: <20211012183324.717975-1-niklas.soderlund+renesas@ragnatech.se> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	dt-bindings: adv748x: Convert bindings to json-schema \| expand dt-bindings: adv748x: Convert bindings to json-schema

diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt deleted file mode 100644 index 4f91686e54a6b939..0000000000000000 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ /dev/null @@ -1,116 +0,0 @@ -* Analog Devices ADV748X video decoder with HDMI receiver - -The ADV7481 and ADV7482 are multi format video decoders with an integrated -HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB -from three input sources HDMI, analog and TTL. - -Required Properties: - - - compatible: Must contain one of the following - - "adi,adv7481" for the ADV7481 - - "adi,adv7482" for the ADV7482 - - - reg: I2C slave addresses - The ADV748x has up to twelve 256-byte maps that can be accessed via the - main I2C ports. Each map has it own I2C address and acts as a standard - slave device on the I2C bus. The main address is mandatory, others are - optional and remain at default values if not specified. - -Optional Properties: - - - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or - "intrq3". All interrupts are optional. The "intrq3" interrupt - is only available on the adv7481 - - interrupts: Specify the interrupt lines for the ADV748x - - reg-names : Names of maps with programmable addresses. - It shall contain all maps needing a non-default address. - Possible map names are: - "main", "dpll", "cp", "hdmi", "edid", "repeater", - "infoframe", "cbus", "cec", "sdp", "txa", "txb" - -The device node must contain one 'port' child node per device input and output -port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes -are numbered as follows. - - Name Type Port - --------------------------------------- - AIN0 sink 0 - AIN1 sink 1 - AIN2 sink 2 - AIN3 sink 3 - AIN4 sink 4 - AIN5 sink 5 - AIN6 sink 6 - AIN7 sink 7 - HDMI sink 8 - TTL sink 9 - TXA source 10 - TXB source 11 - -The digital output port nodes, when present, shall contain at least one -endpoint. Each of those endpoints shall contain the data-lanes property as -described in video-interfaces.txt. - -Required source endpoint properties: - - data-lanes: an array of physical data lane indexes - The accepted value(s) for this property depends on which of the two - sources are described. For TXA 1, 2 or 4 data lanes can be described - while for TXB only 1 data lane is valid. See video-interfaces.txt - for detailed description. - -Ports are optional if they are not connected to anything at the hardware level. - -Example: - - video-receiver@70 { - compatible = "adi,adv7482"; - reg = <0x70 0x71 0x72 0x73 0x74 0x75 - 0x60 0x61 0x62 0x63 0x64 0x65>; - reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", - "infoframe", "cbus", "cec", "sdp", "txa", "txb"; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&gpio6>; - interrupt-names = "intrq1", "intrq2"; - interrupts = <30 IRQ_TYPE_LEVEL_LOW>, - <31 IRQ_TYPE_LEVEL_LOW>; - - port@7 { - reg = <7>; - - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_in>; - }; - }; - - port@8 { - reg = <8>; - - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - - port@a { - reg = <10>; - - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - - port@b { - reg = <11>; - - adv7482_txb: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&csi20_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml new file mode 100644 index 0000000000000000..37df0441d8790c6e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV748X video decoder with HDMI receiver + +maintainers: + - Kieran Bingham <kieran.bingham@ideasonboard.com> + +description: + The ADV7481 and ADV7482 are multi format video decoders with an integrated + HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB + from three input sources HDMI, analog and TTL. + +properties: + compatible: + items: + - enum: + - adi,adv7481 + - adi,adv7482 + + reg: + minItems: 1 + maxItems: 12 + description: + The ADV748x has up to twelve 256-byte maps that can be accessed via the + main I2C ports. Each map has it own I2C address and acts as a standard + slave device on the I2C bus. The main address is mandatory, others are + optional and remain at default values if not specified. + + reg-names: + minItems: 1 + items: + - const: main + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + + interrupts: true + + interrupt-names: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port@[0-7]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port nodes for analog inputs AIN[0-7]. + + properties: + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for HDMI. + + port@9: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for TTL. + + port@a: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXA. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@b: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXB. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + maxItems: 1 + + required: + - clock-lanes + - data-lanes + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adv7481 + then: + properties: + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + items: + - enum: [ intrq1, intrq2, intrq3 ] + - enum: [ intrq1, intrq2, intrq3 ] + - enum: [ intrq1, intrq2, intrq3 ] + else: + properties: + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [ intrq1, intrq2 ] + - enum: [ intrq1, intrq2 ] + +additionalProperties: false + +required: + - compatible + - reg + - ports + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; + + interrupt-parent = <&gpio6>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intrq1", "intrq2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@b { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; + }; + };

dt-bindings: adv748x: Convert bindings to json-schema

Commit Message

Comments

Patch