diff mbox series

[v7,1/8] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain

Message ID 20210829154757.784699-2-dmitry.baryshkov@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series clk: qcom: use power-domain for sm8250's clock controllers | expand

Commit Message

Dmitry Baryshkov Aug. 29, 2021, 3:47 p.m. UTC 
On sm8250 dispcc requires MMCX power domain to be powered up before
clock controller's registers become available. For now sm8250 was using
external regulator driven by the power domain to describe this
relationship. Switch into specifying power-domain and required opp-state
directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/clock/qcom,dispcc-sm8x50.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Stephen Boyd Oct. 15, 2021, 12:55 a.m. UTC | #1 
Quoting Dmitry Baryshkov (2021-08-29 08:47:50)
> On sm8250 dispcc requires MMCX power domain to be powered up before
> clock controller's registers become available. For now sm8250 was using
> external regulator driven by the power domain to describe this
> relationship. Switch into specifying power-domain and required opp-state
> directly.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 6667261dc665..31497677e8de 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -56,6 +56,16 @@  properties:
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +80,7 @@  additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8250-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -90,5 +101,7 @@  examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8250_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...