Message ID | 20211016103656.16791-5-verdre@v0yd.nl (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | A few more cleanups and fixes for mwifiex | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Not a local patch |
On Saturday 16 October 2021 12:36:55 Jonas Dreßler wrote: > While looking at on-air packets using Wireshark, I noticed we're never > setting the initiator bit when sending DELBA requests to the AP: While > we set the bit on our del_ba_param_set bitmask, we forget to actually > copy that bitmask over to the command struct, which means we never > actually set the initiator bit. > > Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command > struct. > > Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Hello! This looks like is fixing mwifiex_send_delba() function which was added in initial mwifiex commit. So probably it should have following tag: Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") > --- > drivers/net/wireless/marvell/mwifiex/11n.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c > index b0695432b26a..9ff2058bcd7e 100644 > --- a/drivers/net/wireless/marvell/mwifiex/11n.c > +++ b/drivers/net/wireless/marvell/mwifiex/11n.c > @@ -657,14 +657,15 @@ int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac, > uint16_t del_ba_param_set; > > memset(&delba, 0, sizeof(delba)); > - delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS); > > - del_ba_param_set = le16_to_cpu(delba.del_ba_param_set); > + del_ba_param_set = tid << DELBA_TID_POS; > + > if (initiator) > del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK; > else > del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK; > > + delba.del_ba_param_set = cpu_to_le16(del_ba_param_set); > memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN); > > /* We don't wait for the response of this command */ > -- > 2.31.1 >
On 10/16/21 16:28, Pali Rohár wrote: > On Saturday 16 October 2021 12:36:55 Jonas Dreßler wrote: >> While looking at on-air packets using Wireshark, I noticed we're never >> setting the initiator bit when sending DELBA requests to the AP: While >> we set the bit on our del_ba_param_set bitmask, we forget to actually >> copy that bitmask over to the command struct, which means we never >> actually set the initiator bit. >> >> Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command >> struct. >> >> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> > > Hello! This looks like is fixing mwifiex_send_delba() function which was > added in initial mwifiex commit. So probably it should have following > tag: > > Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") > Hi Pali, thanks a lot for the quick review, I just addressed this in v3! >> --- >> drivers/net/wireless/marvell/mwifiex/11n.c | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c >> index b0695432b26a..9ff2058bcd7e 100644 >> --- a/drivers/net/wireless/marvell/mwifiex/11n.c >> +++ b/drivers/net/wireless/marvell/mwifiex/11n.c >> @@ -657,14 +657,15 @@ int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac, >> uint16_t del_ba_param_set; >> >> memset(&delba, 0, sizeof(delba)); >> - delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS); >> >> - del_ba_param_set = le16_to_cpu(delba.del_ba_param_set); >> + del_ba_param_set = tid << DELBA_TID_POS; >> + >> if (initiator) >> del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK; >> else >> del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK; >> >> + delba.del_ba_param_set = cpu_to_le16(del_ba_param_set); >> memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN); >> >> /* We don't wait for the response of this command */ >> -- >> 2.31.1 >>
diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c index b0695432b26a..9ff2058bcd7e 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n.c +++ b/drivers/net/wireless/marvell/mwifiex/11n.c @@ -657,14 +657,15 @@ int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac, uint16_t del_ba_param_set; memset(&delba, 0, sizeof(delba)); - delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS); - del_ba_param_set = le16_to_cpu(delba.del_ba_param_set); + del_ba_param_set = tid << DELBA_TID_POS; + if (initiator) del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK; else del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK; + delba.del_ba_param_set = cpu_to_le16(del_ba_param_set); memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN); /* We don't wait for the response of this command */
While looking at on-air packets using Wireshark, I noticed we're never setting the initiator bit when sending DELBA requests to the AP: While we set the bit on our del_ba_param_set bitmask, we forget to actually copy that bitmask over to the command struct, which means we never actually set the initiator bit. Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command struct. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> --- drivers/net/wireless/marvell/mwifiex/11n.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)