Message ID | 1634277941-6672-2-git-send-email-hongxing.zhu@nxp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | PCI: imx6: refine codes and add compliance tests mode support | expand |
Am Freitag, dem 15.10.2021 um 14:05 +0800 schrieb Richard Zhu: > No function changes, just encapsulate the i.MX PCIe clocks enable > operations into one standalone function > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > --- > drivers/pci/controller/dwc/pci-imx6.c | 79 ++++++++++++++++----------- > 1 file changed, 48 insertions(+), 31 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index 26f49f797b0f..1fa1dba6da81 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -470,38 +470,16 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) > return ret; > } > > -static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) > -{ > - u32 val; > - struct device *dev = imx6_pcie->pci->dev; > - > - if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, > - IOMUXC_GPR22, val, > - val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, > - PHY_PLL_LOCK_WAIT_USLEEP_MAX, > - PHY_PLL_LOCK_WAIT_TIMEOUT)) > - dev_err(dev, "PCIe PLL lock timeout\n"); > -} > - > -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > +static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie) > { > struct dw_pcie *pci = imx6_pcie->pci; > struct device *dev = pci->dev; > int ret; > > - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { > - ret = regulator_enable(imx6_pcie->vpcie); > - if (ret) { > - dev_err(dev, "failed to enable vpcie regulator: %d\n", > - ret); > - return; > - } > - } > - > ret = clk_prepare_enable(imx6_pcie->pcie_phy); > if (ret) { > dev_err(dev, "unable to enable pcie_phy clock\n"); > - goto err_pcie_phy; > + return ret; > } > > ret = clk_prepare_enable(imx6_pcie->pcie_bus); > @@ -524,6 +502,51 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > > /* allow the clocks to stabilize */ > usleep_range(200, 500); > + return 0; > + > +err_ref_clk: > + clk_disable_unprepare(imx6_pcie->pcie); > +err_pcie: > + clk_disable_unprepare(imx6_pcie->pcie_bus); > +err_pcie_bus: > + clk_disable_unprepare(imx6_pcie->pcie_phy); > + > + return ret; > +} > + > +static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) > +{ > + u32 val; > + struct device *dev = imx6_pcie->pci->dev; > + > + if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, > + IOMUXC_GPR22, val, > + val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, > + PHY_PLL_LOCK_WAIT_USLEEP_MAX, > + PHY_PLL_LOCK_WAIT_TIMEOUT)) > + dev_err(dev, "PCIe PLL lock timeout\n"); > +} > + > +static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > +{ > + struct dw_pcie *pci = imx6_pcie->pci; > + struct device *dev = pci->dev; > + int ret; > + > + if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { > + ret = regulator_enable(imx6_pcie->vpcie); > + if (ret) { > + dev_err(dev, "failed to enable vpcie regulator: %d\n", > + ret); > + return; > + } > + } > + > + ret = imx6_pcie_clk_enable(imx6_pcie); > + if (ret) { > + dev_err(dev, "unable to enable pcie clocks\n"); > + goto err_clks; > + } > > /* Some boards don't have PCIe reset GPIO. */ > if (gpio_is_valid(imx6_pcie->reset_gpio)) { > @@ -578,13 +601,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > > return; > > -err_ref_clk: > - clk_disable_unprepare(imx6_pcie->pcie); > -err_pcie: > - clk_disable_unprepare(imx6_pcie->pcie_bus); > -err_pcie_bus: > - clk_disable_unprepare(imx6_pcie->pcie_phy); > -err_pcie_phy: > +err_clks: > if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { > ret = regulator_disable(imx6_pcie->vpcie); > if (ret)
> -----Original Message----- > From: Lucas Stach <l.stach@pengutronix.de> > Sent: Saturday, October 16, 2021 2:14 AM > To: Richard Zhu <hongxing.zhu@nxp.com>; bhelgaas@google.com; > lorenzo.pieralisi@arm.com > Cc: linux-pci@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; > kernel@pengutronix.de > Subject: Re: [RESEND v2 1/5] PCI: imx6: Encapsulate the clock enable into > one standalone function > > Am Freitag, dem 15.10.2021 um 14:05 +0800 schrieb Richard Zhu: > > No function changes, just encapsulate the i.MX PCIe clocks enable > > operations into one standalone function > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > [Richard Zhu] Thanks. Best Regards Richard Zhu > > --- > > drivers/pci/controller/dwc/pci-imx6.c | 79 > > ++++++++++++++++----------- > > 1 file changed, 48 insertions(+), 31 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c > > b/drivers/pci/controller/dwc/pci-imx6.c > > index 26f49f797b0f..1fa1dba6da81 100644 > > --- a/drivers/pci/controller/dwc/pci-imx6.c > > +++ b/drivers/pci/controller/dwc/pci-imx6.c > > @@ -470,38 +470,16 @@ static int imx6_pcie_enable_ref_clk(struct > imx6_pcie *imx6_pcie) > > return ret; > > } > > > > -static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie > > *imx6_pcie) -{ > > - u32 val; > > - struct device *dev = imx6_pcie->pci->dev; > > - > > - if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, > > - IOMUXC_GPR22, val, > > - val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, > > - PHY_PLL_LOCK_WAIT_USLEEP_MAX, > > - PHY_PLL_LOCK_WAIT_TIMEOUT)) > > - dev_err(dev, "PCIe PLL lock timeout\n"); > > -} > > - > > -static void imx6_pcie_deassert_core_reset(struct imx6_pcie > > *imx6_pcie) > > +static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie) > > { > > struct dw_pcie *pci = imx6_pcie->pci; > > struct device *dev = pci->dev; > > int ret; > > > > - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { > > - ret = regulator_enable(imx6_pcie->vpcie); > > - if (ret) { > > - dev_err(dev, "failed to enable vpcie regulator: %d\n", > > - ret); > > - return; > > - } > > - } > > - > > ret = clk_prepare_enable(imx6_pcie->pcie_phy); > > if (ret) { > > dev_err(dev, "unable to enable pcie_phy clock\n"); > > - goto err_pcie_phy; > > + return ret; > > } > > > > ret = clk_prepare_enable(imx6_pcie->pcie_bus); > > @@ -524,6 +502,51 @@ static void imx6_pcie_deassert_core_reset(struct > > imx6_pcie *imx6_pcie) > > > > /* allow the clocks to stabilize */ > > usleep_range(200, 500); > > + return 0; > > + > > +err_ref_clk: > > + clk_disable_unprepare(imx6_pcie->pcie); > > +err_pcie: > > + clk_disable_unprepare(imx6_pcie->pcie_bus); > > +err_pcie_bus: > > + clk_disable_unprepare(imx6_pcie->pcie_phy); > > + > > + return ret; > > +} > > + > > +static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie > > +*imx6_pcie) { > > + u32 val; > > + struct device *dev = imx6_pcie->pci->dev; > > + > > + if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, > > + IOMUXC_GPR22, val, > > + val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, > > + PHY_PLL_LOCK_WAIT_USLEEP_MAX, > > + PHY_PLL_LOCK_WAIT_TIMEOUT)) > > + dev_err(dev, "PCIe PLL lock timeout\n"); } > > + > > +static void imx6_pcie_deassert_core_reset(struct imx6_pcie > > +*imx6_pcie) { > > + struct dw_pcie *pci = imx6_pcie->pci; > > + struct device *dev = pci->dev; > > + int ret; > > + > > + if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { > > + ret = regulator_enable(imx6_pcie->vpcie); > > + if (ret) { > > + dev_err(dev, "failed to enable vpcie regulator: %d\n", > > + ret); > > + return; > > + } > > + } > > + > > + ret = imx6_pcie_clk_enable(imx6_pcie); > > + if (ret) { > > + dev_err(dev, "unable to enable pcie clocks\n"); > > + goto err_clks; > > + } > > > > /* Some boards don't have PCIe reset GPIO. */ > > if (gpio_is_valid(imx6_pcie->reset_gpio)) { @@ -578,13 +601,7 @@ > > static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > > > > return; > > > > -err_ref_clk: > > - clk_disable_unprepare(imx6_pcie->pcie); > > -err_pcie: > > - clk_disable_unprepare(imx6_pcie->pcie_bus); > > -err_pcie_bus: > > - clk_disable_unprepare(imx6_pcie->pcie_phy); > > -err_pcie_phy: > > +err_clks: > > if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { > > ret = regulator_disable(imx6_pcie->vpcie); > > if (ret) >
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 26f49f797b0f..1fa1dba6da81 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -470,38 +470,16 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) return ret; } -static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) -{ - u32 val; - struct device *dev = imx6_pcie->pci->dev; - - if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, - IOMUXC_GPR22, val, - val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, - PHY_PLL_LOCK_WAIT_USLEEP_MAX, - PHY_PLL_LOCK_WAIT_TIMEOUT)) - dev_err(dev, "PCIe PLL lock timeout\n"); -} - -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie) { struct dw_pcie *pci = imx6_pcie->pci; struct device *dev = pci->dev; int ret; - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { - ret = regulator_enable(imx6_pcie->vpcie); - if (ret) { - dev_err(dev, "failed to enable vpcie regulator: %d\n", - ret); - return; - } - } - ret = clk_prepare_enable(imx6_pcie->pcie_phy); if (ret) { dev_err(dev, "unable to enable pcie_phy clock\n"); - goto err_pcie_phy; + return ret; } ret = clk_prepare_enable(imx6_pcie->pcie_bus); @@ -524,6 +502,51 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) /* allow the clocks to stabilize */ usleep_range(200, 500); + return 0; + +err_ref_clk: + clk_disable_unprepare(imx6_pcie->pcie); +err_pcie: + clk_disable_unprepare(imx6_pcie->pcie_bus); +err_pcie_bus: + clk_disable_unprepare(imx6_pcie->pcie_phy); + + return ret; +} + +static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) +{ + u32 val; + struct device *dev = imx6_pcie->pci->dev; + + if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, + IOMUXC_GPR22, val, + val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, + PHY_PLL_LOCK_WAIT_USLEEP_MAX, + PHY_PLL_LOCK_WAIT_TIMEOUT)) + dev_err(dev, "PCIe PLL lock timeout\n"); +} + +static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + int ret; + + if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { + ret = regulator_enable(imx6_pcie->vpcie); + if (ret) { + dev_err(dev, "failed to enable vpcie regulator: %d\n", + ret); + return; + } + } + + ret = imx6_pcie_clk_enable(imx6_pcie); + if (ret) { + dev_err(dev, "unable to enable pcie clocks\n"); + goto err_clks; + } /* Some boards don't have PCIe reset GPIO. */ if (gpio_is_valid(imx6_pcie->reset_gpio)) { @@ -578,13 +601,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) return; -err_ref_clk: - clk_disable_unprepare(imx6_pcie->pcie); -err_pcie: - clk_disable_unprepare(imx6_pcie->pcie_bus); -err_pcie_bus: - clk_disable_unprepare(imx6_pcie->pcie_phy); -err_pcie_phy: +err_clks: if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { ret = regulator_disable(imx6_pcie->vpcie); if (ret)
No function changes, just encapsulate the i.MX PCIe clocks enable operations into one standalone function Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 79 ++++++++++++++++----------- 1 file changed, 48 insertions(+), 31 deletions(-)