| Message ID | 20211020231646.278706-1-david@ixit.cz (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | dt-bindings: mfd: qcom: pm8xxx: add pm8018 compatible | expand |
On Thu, 21 Oct 2021, David Heidelberg wrote: > Add missing compatible for the PM8018 model. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 + > 1 file changed, 1 insertion(+) Applied, thanks.
On Thu, 21 Oct 2021 01:16:45 +0200, David Heidelberg wrote: > Add missing compatible for the PM8018 model. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 + > 1 file changed, 1 insertion(+) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1544064 pmic@0: compatible: Additional items are not allowed ('qcom,pm8921' was unexpected) arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml pmic@0: compatible: ['qcom,pm8018', 'qcom,pm8921'] is too long arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml pmic@0: 'gpio@150', 'keypad@148', 'led@131', 'led@132', 'led@133', 'led@48', 'mpps@50', 'pwrkey@1c', 'vibrator@4a', 'xoadc@197' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$' arch/arm/boot/dts/qcom-apq8060-dragonboard.dt.yaml pmic@0: 'gpio@150', 'keypad@148', 'mpps@50', 'pwrkey@1c', 'vibrator@4a', 'xoadc@197' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$' arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml pmic@0: 'gpio@150', 'mpp@50', 'pwrkey@1c' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$' arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml pmic@0: 'gpio@150', 'mpps@50', 'pwrkey@1c', 'xoadc@197' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$' arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml pmic@0: 'keypad@148', 'pwrkey@1c' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$' arch/arm/boot/dts/qcom-msm8960-cdp.dt.yaml pmic@0: rtc@11d:compatible: Additional items are not allowed ('qcom,pm8921-rtc' was unexpected) arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml pmic@0: rtc@11d:compatible: ['qcom,pm8018-rtc', 'qcom,pm8921-rtc'] is too long arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml pmic@1: 'mpps@50' does not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$' arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml index 9065ec53e643..2568736701be 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -16,6 +16,7 @@ description: | properties: compatible: enum: + - qcom,pm8018 - qcom,pm8058 - qcom,pm8821 - qcom,pm8921
Add missing compatible for the PM8018 model. Signed-off-by: David Heidelberg <david@ixit.cz> --- Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 + 1 file changed, 1 insertion(+)