| Message ID | 20210804092244.390376-4-nobuhiro1.iwamatsu@toshiba.co.jp (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: visconti: Add support common clock driver and reset driver | expand |
Quoting Nobuhiro Iwamatsu (2021-08-04 02:22:43) > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index 5f06879d7fe9..dbf70fdecfc8 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -116,6 +116,7 @@ obj-y += ti/ > obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ > obj-$(CONFIG_ARCH_U8500) += ux500/ > obj-y += versatile/ > +obj-$(CONFIG_ARCH_VISCONTI) += visconti/ Can we have an actual Kconfig symbol for this so we can compile test the driver? > ifeq ($(CONFIG_COMMON_CLK), y) > obj-$(CONFIG_X86) += x86/ > endif > diff --git a/drivers/clk/visconti/Makefile b/drivers/clk/visconti/Makefile > new file mode 100644 > index 000000000000..c1254fd52b31 > --- /dev/null > +++ b/drivers/clk/visconti/Makefile > @@ -0,0 +1,5 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# Makefile for Toshiba Visconti clock > + > +obj-y += clkc.o pll.o reset.o > +obj-y += pll-tmpv770x.o clkc-tmpv770x.o > diff --git a/drivers/clk/visconti/clkc-tmpv770x.c b/drivers/clk/visconti/clkc-tmpv770x.c > new file mode 100644 > index 000000000000..6ee5c5179f7c > --- /dev/null > +++ b/drivers/clk/visconti/clkc-tmpv770x.c > @@ -0,0 +1,232 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Toshiba Visconti clock controller > + * > + * Copyright (c) 2021 TOSHIBA CORPORATION > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > + * > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + */ > + > +#include <dt-bindings/clock/toshiba,tmpv770x.h> > +#include <dt-bindings/reset/toshiba,tmpv770x.h> Please include these after linux headers. > +#include <linux/clk.h> Is it a clk provider or a clk consumer? Hopefully it's a clk provider, and thus this should be clk-provider.h instead of clk.h for the consumer. > +#include <linux/platform_device.h> > + > +#include "clkc.h" > +#include "reset.h" > + > +static DEFINE_SPINLOCK(tmpv770x_clk_lock); > +static DEFINE_SPINLOCK(tmpv770x_rst_lock); > + > +static const struct visconti_fixed_clk fixed_clk_tables[] = { > + /* PLL1 */ > + /* PICMPT0/1, PITSC, PIUWDT, PISWDT, PISBUS, PIPMU, PIGPMU, PITMU */ > + /* PIEMM, PIMISC, PIGCOMM, PIDCOMM, PIMBUS, PIGPIO, PIPGM */ > + { TMPV770X_CLK_PIPLL1_DIV4, "pipll1_div4", "pipll1", 0, 1, 4, }, > + /* PISBUS */ > + { TMPV770X_CLK_PIPLL1_DIV2, "pipll1_div2", "pipll1", 0, 1, 2, }, > + /* PICOBUS_CLK */ > + { TMPV770X_CLK_PIPLL1_DIV1, "pipll1_div1", "pipll1", 0, 1, 1, }, > + /* PIDNNPLL */ > + /* CONN_CLK, PIMBUS, PICRC0/1 */ > + { TMPV770X_CLK_PIDNNPLL_DIV1, "pidnnpll_div1", "pidnnpll", 0, 1, 1, }, > + { TMPV770X_CLK_PIREFCLK, "pirefclk", "osc2-clk", 0, 1, 1, }, > + { TMPV770X_CLK_WDTCLK, "wdtclk", "osc2-clk", 0, 1, 1, }, > +}; > + > +static const struct visconti_clk_gate_table pietherpll_clk_gate_tables[] = { > + /* pietherpll */ > + { TMPV770X_CLK_PIETHER_2P5M, "piether_2p5m", "pietherpll", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 4, 200, There's quite a lot of CLK_IGNORE_UNUSED. Should these be CLK_IS_CRITICAL instead, and then only the ones that are truly critical to the system still running should be marked as critical along with a comment explaining what they're clocking and why that device isn't probing and enabling the clks itself. > + TMPV770X_RESET_PIETHER_2P5M, }, > + { TMPV770X_CLK_PIETHER_25M, "piether_25m", "pietherpll", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 5, 20, > + TMPV770X_RESET_PIETHER_25M, }, > + { TMPV770X_CLK_PIETHER_50M, "piether_50m", "pietherpll", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 6, 10, > + TMPV770X_RESET_PIETHER_50M, }, > + { TMPV770X_CLK_PIETHER_125M, "piether_125m", "pietherpll", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 7, 4, > + TMPV770X_RESET_PIETHER_125M, }, > +}; > + > +static const struct visconti_clk_gate_table clk_gate_tables[] = { > + { TMPV770X_CLK_HOX, "hox", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x4C, 0x14C, 0, 1, Lowercase hex please. > + TMPV770X_RESET_HOX, }, > + { TMPV770X_CLK_PCIE_MSTR, "pcie_mstr", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 0, 1, > + TMPV770X_RESET_PCIE_MSTR, }, > + { TMPV770X_CLK_PCIE_AUX, "pcie_aux", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 1, 24, > + TMPV770X_RESET_PCIE_AUX, }, > + { TMPV770X_CLK_PIINTC, "piintc", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x8, 0x108, 0, 2, > + TMPV770X_RESET_PIINTC,}, > + { TMPV770X_CLK_PIETHER_BUS, "piether_bus", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 0, 2, > + TMPV770X_RESET_PIETHER_BUS, }, /* BUS_CLK */ > + { TMPV770X_CLK_PISPI0, "pispi0", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 0, 2, > + TMPV770X_RESET_PISPI0, }, > + { TMPV770X_CLK_PISPI1, "pispi1", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 1, 2, > + TMPV770X_RESET_PISPI1, }, > + { TMPV770X_CLK_PISPI2, "pispi2", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 2, 2, > + TMPV770X_RESET_PISPI2, }, > + { TMPV770X_CLK_PISPI3, "pispi3", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 3, 2, > + TMPV770X_RESET_PISPI3,}, > + { TMPV770X_CLK_PISPI4, "pispi4", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 4, 2, > + TMPV770X_RESET_PISPI4, }, > + { TMPV770X_CLK_PISPI5, "pispi5", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 5, 2, > + TMPV770X_RESET_PISPI5}, > + { TMPV770X_CLK_PISPI6, "pispi6", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 6, 2, > + TMPV770X_RESET_PISPI6,}, > + { TMPV770X_CLK_PIUART0, "piuart0", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 0, 4, > + TMPV770X_RESET_PIUART0,}, > + { TMPV770X_CLK_PIUART1, "piuart1", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 1, 4, > + TMPV770X_RESET_PIUART1, }, > + { TMPV770X_CLK_PIUART2, "piuart2", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 2, 4, > + TMPV770X_RESET_PIUART2, }, > + { TMPV770X_CLK_PIUART3, "piuart3", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 3, 4, > + TMPV770X_RESET_PIUART3, }, > + { TMPV770X_CLK_PII2C0, "pii2c0", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 0, 4, > + TMPV770X_RESET_PII2C0, }, > + { TMPV770X_CLK_PII2C1, "pii2c1", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 1, 4, > + TMPV770X_RESET_PII2C1, }, > + { TMPV770X_CLK_PII2C2, "pii2c2", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 2, 4, > + TMPV770X_RESET_PII2C2, }, > + { TMPV770X_CLK_PII2C3, "pii2c3", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 3, 4, > + TMPV770X_RESET_PII2C3,}, > + { TMPV770X_CLK_PII2C4, "pii2c4", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 4, 4, > + TMPV770X_RESET_PII2C4, }, > + { TMPV770X_CLK_PII2C5, "pii2c5", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 5, 4, > + TMPV770X_RESET_PII2C5, }, > + { TMPV770X_CLK_PII2C6, "pii2c6", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 6, 4, > + TMPV770X_RESET_PII2C6, }, > + { TMPV770X_CLK_PII2C7, "pii2c7", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 7, 4, > + TMPV770X_RESET_PII2C7, }, > + { TMPV770X_CLK_PII2C8, "pii2c8", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 8, 4, > + TMPV770X_RESET_PII2C8, }, > + /* PIPCMIF */ > + { TMPV770X_CLK_PIPCMIF, "pipcmif", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x64, 0x164, 0, 4, > + TMPV770X_RESET_PIPCMIF, }, > + /* PISYSTEM */ > + { TMPV770X_CLK_WRCK, "wrck", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x68, 0x168, 9, 32, > + -1, }, /* No reset */ > + { TMPV770X_CLK_PICKMON, "pickmon", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x10, 0x110, 8, 4, > + TMPV770X_RESET_PICKMON, }, > + { TMPV770X_CLK_SBUSCLK, "sbusclk", "pipll1", > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x14, 0x114, 0, 4, > + TMPV770X_RESET_SBUSCLK, }, > +}; > + > +static const struct visconti_reset_data clk_reset_data[] = { > + [TMPV770X_RESET_PIETHER_2P5M] = { 0x434, 0x534, 4, }, > + [TMPV770X_RESET_PIETHER_25M] = { 0x434, 0x534, 5, }, > + [TMPV770X_RESET_PIETHER_50M] = { 0x434, 0x534, 6, }, > + [TMPV770X_RESET_PIETHER_125M] = { 0x434, 0x534, 7, }, > + [TMPV770X_RESET_HOX] = { 0x44C, 0x54C, 0, }, > + [TMPV770X_RESET_PCIE_MSTR] = { 0x438, 0x538, 0, }, > + [TMPV770X_RESET_PCIE_AUX] = { 0x438, 0x538, 1, }, > + [TMPV770X_RESET_PIINTC] = { 0x408, 0x508, 0, }, > + [TMPV770X_RESET_PIETHER_BUS] = { 0x434, 0x534, 0, }, > + [TMPV770X_RESET_PISPI0] = { 0x428, 0x528, 0, }, > + [TMPV770X_RESET_PISPI1] = { 0x428, 0x528, 1, }, > + [TMPV770X_RESET_PISPI2] = { 0x428, 0x528, 2, }, > + [TMPV770X_RESET_PISPI3] = { 0x428, 0x528, 3, }, > + [TMPV770X_RESET_PISPI4] = { 0x428, 0x528, 4, }, > + [TMPV770X_RESET_PISPI5] = { 0x428, 0x528, 5, }, > + [TMPV770X_RESET_PISPI6] = { 0x428, 0x528, 6, }, > + [TMPV770X_RESET_PIUART0] = { 0x42C, 0x52C, 0, }, > + [TMPV770X_RESET_PIUART1] = { 0x42C, 0x52C, 1, }, > + [TMPV770X_RESET_PIUART2] = { 0x42C, 0x52C, 2, }, > + [TMPV770X_RESET_PIUART3] = { 0x42C, 0x52C, 3, }, > + [TMPV770X_RESET_PII2C0] = { 0x430, 0x530, 0, }, > + [TMPV770X_RESET_PII2C1] = { 0x430, 0x530, 1, }, > + [TMPV770X_RESET_PII2C2] = { 0x430, 0x530, 2, }, > + [TMPV770X_RESET_PII2C3] = { 0x430, 0x530, 3, }, > + [TMPV770X_RESET_PII2C4] = { 0x430, 0x530, 4, }, > + [TMPV770X_RESET_PII2C5] = { 0x430, 0x530, 5, }, > + [TMPV770X_RESET_PII2C6] = { 0x430, 0x530, 6, }, > + [TMPV770X_RESET_PII2C7] = { 0x430, 0x530, 7, }, > + [TMPV770X_RESET_PII2C8] = { 0x430, 0x530, 8, }, > + [TMPV770X_RESET_PIPCMIF] = { 0x464, 0x564, 0, }, > + [TMPV770X_RESET_PICKMON] = { 0x410, 0x510, 8, }, > + [TMPV770X_RESET_SBUSCLK] = { 0x414, 0x514, 0, }, > +}; > + > +static void __init tmpv770x_clkc_setup_clks(struct device_node *np) > +{ > + struct visconti_clk_provider *ctx; > + struct regmap *regmap; > + int ret, i; > + > + regmap = device_node_to_regmap(np); Is it inside a syscon? > + if (IS_ERR(regmap)) > + return; > + > + ctx = visconti_init_clk(np, regmap, TMPV770X_NR_CLK); > + if (IS_ERR(ctx)) > + return; > + > + ret = visconti_register_reset_controller(np, regmap, clk_reset_data, > + TMPV770X_NR_RESET, > + &visconti_reset_ops, > + &tmpv770x_rst_lock); > + if (ret) { > + pr_err("Failed to register reset controller: %d\n", ret); > + return; > + } > + > + for (i = 0; i < (ARRAY_SIZE(fixed_clk_tables)); i++) > + ctx->clk_data.clks[fixed_clk_tables[i].id] = > + clk_register_fixed_factor(NULL, > + fixed_clk_tables[i].name, > + fixed_clk_tables[i].parent, > + fixed_clk_tables[i].flag, > + fixed_clk_tables[i].mult, > + fixed_clk_tables[i].div); > + > + ret = visconti_clk_register_gates(ctx, clk_gate_tables, > + ARRAY_SIZE(clk_gate_tables), clk_reset_data, > + &tmpv770x_clk_lock); > + if (ret) { > + pr_err("Failed to register main clock gate: %d\n", ret); > + return; > + } > + > + ret = visconti_clk_register_gates(ctx, pietherpll_clk_gate_tables, > + ARRAY_SIZE(pietherpll_clk_gate_tables), > + clk_reset_data, &tmpv770x_clk_lock); > + if (ret) { > + pr_err("Failed to register pietherpll clock gate: %d\n", ret); > + return; > + } > + > + of_clk_add_provider(np, of_clk_src_onecell_get, &ctx->clk_data); > +} > + > +CLK_OF_DECLARE_DRIVER(tmpv770x_clkc, "toshiba,tmpv7708-pismu", tmpv770x_clkc_setup_clks); Any chance this can be a platform driver? > diff --git a/drivers/clk/visconti/clkc.c b/drivers/clk/visconti/clkc.c > new file mode 100644 > index 000000000000..32b6f6266154 > --- /dev/null > +++ b/drivers/clk/visconti/clkc.c > @@ -0,0 +1,220 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Toshiba Visconti clock controller > + * > + * Copyright (c) 2021 TOSHIBA CORPORATION > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > + * > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + */ > +#include <linux/clk-provider.h> > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <linux/string.h> > + > +#include "clkc.h" > + > +static inline struct visconti_clk_gate *to_visconti_clk_gate(struct clk_hw *hw) > +{ > + return container_of(hw, struct visconti_clk_gate, hw); > +} > + > +static int visconti_gate_clk_is_enabled(struct clk_hw *hw) > +{ > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); > + u32 clk = BIT(gate->ck_idx); > + u32 val; > + > + regmap_read(gate->regmap, gate->ckon_offset, &val); > + return (val & clk) ? 1 : 0; > +} > + > +static void visconti_gate_clk_disable(struct clk_hw *hw) > +{ > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); > + u32 clk = BIT(gate->ck_idx); > + u32 rst = BIT(gate->rs_idx); > + unsigned long flags; > + > + spin_lock_irqsave(gate->lock, flags); > + > + if (visconti_gate_clk_is_enabled(hw)) { So we never disable the clk? > + spin_unlock_irqrestore(gate->lock, flags); > + return; > + } > + > + /* Reset release */ > + regmap_update_bits(gate->regmap, gate->rson_offset, rst, 1); > + > + udelay(100); > + > + /* Disable clock */ > + regmap_update_bits(gate->regmap, gate->ckoff_offset, clk, 1); > + spin_unlock_irqrestore(gate->lock, flags); > +} > + > +static int visconti_gate_clk_enable(struct clk_hw *hw) > +{ > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); > + u32 clk = BIT(gate->ck_idx); > + u32 rst = BIT(gate->rs_idx); > + unsigned long flags; > + u32 val; > + > + spin_lock_irqsave(gate->lock, flags); > + > + if (visconti_gate_clk_is_enabled(hw)) { The core framework should only call down to here if the clk is actually disabled. This check can be removed. > + spin_unlock_irqrestore(gate->lock, flags); > + return 0; > + } > + > + regmap_update_bits(gate->regmap, gate->ckon_offset, clk, 1); > + /* Need read back */ Why? Please indicate why instead of just saying what the code is doing. > + regmap_read(gate->regmap, gate->ckon_offset, &val); > + > + udelay(100); > + /* Reset release */ > + regmap_update_bits(gate->regmap, gate->rsoff_offset, rst, 1); > + /* Need read back */ > + regmap_read(gate->regmap, gate->ckoff_offset, &val); > + spin_unlock_irqrestore(gate->lock, flags); > + > + return 0; > +} > + > +static const struct clk_ops visconti_clk_gate_ops = { > + .enable = visconti_gate_clk_enable, > + .disable = visconti_gate_clk_disable, > + .is_enabled = visconti_gate_clk_is_enabled, > +}; > + > +static struct clk_hw *visconti_clk_register_gate(struct device *dev, > + const char *name, > + const char *parent_name, > + struct regmap *regmap, > + const struct visconti_clk_gate_table *clks, > + u32 rson_offset, > + u32 rsoff_offset, > + u8 rs_idx, > + spinlock_t *lock) > +{ > + struct visconti_clk_gate *gate; > + struct clk_init_data init; > + struct clk_hw *hw; > + int ret; > + > + gate = kzalloc(sizeof(*gate), GFP_KERNEL); > + if (!gate) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = &visconti_clk_gate_ops; > + init.flags = clks->flags; > + init.parent_names = parent_name ? &parent_name : NULL; > + init.num_parents = parent_name ? 1 : 0; Do some clks have parents and other clks don't? Or do they always have parents? Preferably it's one or the other. And if there are parents, please use clk_parent_data instead of parent_names. > + > + gate->regmap = regmap; > + gate->ckon_offset = clks->ckon_offset; > + gate->ckoff_offset = clks->ckoff_offset; > + gate->ck_idx = clks->ck_idx; > + gate->rson_offset = rson_offset; > + gate->rsoff_offset = rsoff_offset; > + gate->rs_idx = rs_idx; > + gate->lock = lock; > + gate->hw.init = &init; > + > + hw = &gate->hw; > + ret = clk_hw_register(dev, hw); Is the dev non-NULL? If yes then can devm be used? > + if (ret) { > + kfree(gate); > + hw = ERR_PTR(ret); > + } > + > + return hw; > +} > + > +int visconti_clk_register_gates(struct visconti_clk_provider *data, > + const struct visconti_clk_gate_table *clks, > + int num_gate, const struct visconti_reset_data *reset, > + spinlock_t *lock) > +{ > + u32 rson_offset, rsoff_offset; > + struct clk_hw *hw_clk; > + u8 rs_idx; > + int i; > + > + for (i = 0; i < num_gate; i++) { > + struct clk *clk; > + char *div_name; > + > + div_name = kasprintf(GFP_KERNEL, "%s_div", clks[i].name); > + if (!div_name) > + return -ENOMEM; > + > + if (clks[i].rs_id >= 0) { > + rson_offset = reset[clks[i].rs_id].rson_offset; > + rsoff_offset = reset[clks[i].rs_id].rsoff_offset; > + rs_idx = reset[clks[i].rs_id].rs_idx; > + } else { > + rson_offset = rsoff_offset = rs_idx = -1; > + } > + > + clk = clk_register_fixed_factor(NULL, div_name, clks[i].parent, > + 0, 1, clks[i].div); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + hw_clk = visconti_clk_register_gate(NULL, Oh it's always NULL? Sad > + clks[i].name, > + div_name, > + data->regmap, > + &clks[i], > + rson_offset, > + rsoff_offset, > + rs_idx, > + lock); > + kfree(div_name); > + if (IS_ERR(hw_clk)) { > + pr_err("%s: failed to register clock %s\n", > + __func__, clks[i].name); > + return PTR_ERR(hw_clk); > + } > + > + data->clk_data.clks[clks[i].id] = hw_clk->clk; > + } > + > + return 0; > +} > + > +struct visconti_clk_provider *visconti_init_clk(struct device_node *np, > + struct regmap *regmap, > + unsigned long nr_clks) > +{ > + struct visconti_clk_provider *ctx; > + struct clk **clk_table; > + int i; > + > + ctx = kzalloc(sizeof(struct visconti_clk_provider), GFP_KERNEL); sizeof(*ctx)? > + if (!ctx) > + return ERR_PTR(-ENOMEM); > + > + clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL); sizeof(*clk_table)? > + if (!clk_table) > + goto err; > + > + for (i = 0; i < nr_clks; ++i) > + clk_table[i] = ERR_PTR(-ENOENT); > + ctx->node = np; > + ctx->regmap = regmap; > + ctx->clk_data.clks = clk_table; > + ctx->clk_data.clk_num = nr_clks; > + > + return ctx; > +err: > + kfree(ctx); > + return ERR_PTR(-ENOMEM); > +} > diff --git a/drivers/clk/visconti/clkc.h b/drivers/clk/visconti/clkc.h > new file mode 100644 > index 000000000000..4df8788d635a > --- /dev/null > +++ b/drivers/clk/visconti/clkc.h > @@ -0,0 +1,75 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Toshiba Visconti clock controller > + * > + * Copyright (c) 2021 TOSHIBA CORPORATION > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > + * > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + */ > + > +#ifndef _VISCONTI_CLKC_H_ > +#define _VISCONTI_CLKC_H_ > + > +#include <linux/mfd/syscon.h> > +#include <linux/clk-provider.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/delay.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <linux/string.h> > +#include <linux/io.h> > +#include <linux/spinlock.h> > + > +#include "reset.h" > + > +struct visconti_clk_provider { > + struct device_node *node; > + struct regmap *regmap; > + struct clk_onecell_data clk_data; > +}; > + > +struct visconti_clk_gate_table { > + unsigned int id; > + const char *name; > + const char *parent; > + u8 flags; > + u32 ckon_offset; > + u32 ckoff_offset; > + u8 ck_idx; > + unsigned int div; > + u8 rs_id; > +}; > + > +struct visconti_fixed_clk { > + unsigned int id; > + const char *name; > + const char *parent; > + unsigned long flag; > + unsigned int mult; > + unsigned int div; > +}; > + > +struct visconti_clk_gate { > + struct clk_hw hw; > + struct regmap *regmap; > + u32 ckon_offset; > + u32 ckoff_offset; > + u8 ck_idx; > + u8 flags; > + u32 rson_offset; > + u32 rsoff_offset; > + u8 rs_idx; > + spinlock_t *lock; > +}; > + > +struct visconti_clk_provider *visconti_init_clk(struct device_node *np, > + struct regmap *regmap, > + unsigned long nr_clks); > +int visconti_clk_register_gates(struct visconti_clk_provider *data, > + const struct visconti_clk_gate_table *clks, > + int num_gate, > + const struct visconti_reset_data *reset, > + spinlock_t *lock); > +#endif /* _VISCONTI_CLKC_H_ */ > diff --git a/drivers/clk/visconti/pll-tmpv770x.c b/drivers/clk/visconti/pll-tmpv770x.c > new file mode 100644 > index 000000000000..a0874cb6a67b > --- /dev/null > +++ b/drivers/clk/visconti/pll-tmpv770x.c > @@ -0,0 +1,85 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Toshiba Visconti PLL controller > + * > + * Copyright (c) 2021 TOSHIBA CORPORATION > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > + * > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + */ > + > +#include <dt-bindings/clock/toshiba,tmpv770x.h> > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/of_address.h> > +#include <linux/slab.h> > + > +#include "pll.h" > + > +static DEFINE_SPINLOCK(tmpv770x_pll_lock); > + > +static const struct visconti_pll_rate_table pipll0_rates[] __initconst = { > + VISCONTI_PLL_RATE(840000000, 0x1, 0x0, 0x1, 0x54, 0x000000, 0x2, 0x1), > + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1), > + VISCONTI_PLL_RATE(600000000, 0x1, 0x0, 0x1, 0x3C, 0x000000, 0x2, 0x1), > + { /* sentinel */ }, > +}; > + > +static const struct visconti_pll_rate_table piddrcpll_rates[] __initconst = { > + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1), > + VISCONTI_PLL_RATE(760000000, 0x1, 0x0, 0x1, 0x4C, 0x000000, 0x2, 0x1), > + { /* sentinel */ }, > +}; > + > +static const struct visconti_pll_rate_table pivoifpll_rates[] __initconst = { > + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2), > + VISCONTI_PLL_RATE(148500000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x2), > + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2), > + VISCONTI_PLL_RATE(74250000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x4), > + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4), > + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4), > + VISCONTI_PLL_RATE(35750000, 0x1, 0x1, 0x1, 0x32, 0x0CCCCC, 0x7, 0x4), > + { /* sentinel */ }, > +}; > + > +static const struct visconti_pll_rate_table piimgerpll_rates[] __initconst = { > + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2), > + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2), > + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4), > + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4), > + { /* sentinel */ }, > +}; > + > +static const struct visconti_pll_info pll_info[] __initconst = { > + { TMPV770X_PLL_PIPLL0, "pipll0", "osc2-clk", 0, 0x0, pipll0_rates }, > + { TMPV770X_PLL_PIDDRCPLL, "piddrcpll", "osc2-clk", 0, 0x500, piddrcpll_rates }, > + { TMPV770X_PLL_PIVOIFPLL, "pivoifpll", "osc2-clk", 0, 0x600, pivoifpll_rates }, > + { TMPV770X_PLL_PIIMGERPLL, "piimgerpll", "osc2-clk", 0, 0x700, piimgerpll_rates }, > +}; > + > +static void __init tmpv770x_setup_plls(struct device_node *np) > +{ > + struct visconti_pll_provider *ctx; > + void __iomem *reg_base; > + > + reg_base = of_iomap(np, 0); > + if (!reg_base) > + return; > + > + ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL); > + if (IS_ERR(ctx)) { > + iounmap(reg_base); > + return; > + } > + > + ctx->clk_data.clks[TMPV770X_PLL_PIPLL1] = > + clk_register_fixed_rate(NULL, "pipll1", NULL, 0, 600000000); > + ctx->clk_data.clks[TMPV770X_PLL_PIDNNPLL] = > + clk_register_fixed_rate(NULL, "pidnnpll", NULL, 0, 500000000); > + ctx->clk_data.clks[TMPV770X_PLL_PIETHERPLL] = > + clk_register_fixed_rate(NULL, "pietherpll", NULL, 0, 500000000); > + > + visconti_register_plls(ctx, pll_info, ARRAY_SIZE(pll_info), &tmpv770x_pll_lock); > +} > + > +CLK_OF_DECLARE_DRIVER(tmpv770x_plls, "toshiba,tmpv7708-pipllct", tmpv770x_setup_plls); DECLARE_DRIVER is for when more than one device needs to probe the node in DT. Is that happening here? If so, please add a comment indicating what the other driver is. > diff --git a/drivers/clk/visconti/pll.c b/drivers/clk/visconti/pll.c > new file mode 100644 > index 000000000000..7baa9512fad9 > --- /dev/null > +++ b/drivers/clk/visconti/pll.c > @@ -0,0 +1,369 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Toshiba Visconti PLL driver > + * > + * Copyright (c) 2021 TOSHIBA CORPORATION > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > + * > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/delay.h> > +#include <linux/slab.h> > +#include <linux/io.h> > + > +#include "pll.h" > + > +struct visconti_pll { > + struct clk_hw hw; > + void __iomem *pll_base; > + spinlock_t *lock; > + int rate_count; size_t? And then place next to rate_table so we know they're related please. > + unsigned long flags; > + const struct visconti_pll_rate_table *rate_table; > + struct visconti_pll_provider *ctx; > +}; > + > +#define PLL_CONF_REG 0x0000 > +#define PLL_CTRL_REG 0x0004 > +#define PLL_FRACMODE_REG 0x0010 > +#define PLL_INTIN_REG 0x0014 > +#define PLL_FRACIN_REG 0x0018 > +#define PLL_REFDIV_REG 0x001C > +#define PLL_POSTDIV_REG 0x0020 > + > +#define PLL_CONFIG_SEL BIT(0) > +#define PLL_PLLEN BIT(4) > +#define PLL_BYPASS BIT(16) > +#define PLL_INTIN_MASK GENMASK(11, 0) > +#define PLL_FRACIN_MASK GENMASK(23, 0) > +#define PLL_REFDIV_MASK GENMASK(5, 0) > +#define PLL_POSTDIV_MASK GENMASK(2, 0) > + > +static inline struct visconti_pll *to_visconti_pll(struct clk_hw *hw) > +{ > + return container_of(hw, struct visconti_pll, hw); > +} > + > +static void visconti_pll_get_params(struct visconti_pll *pll, > + struct visconti_pll_rate_table *rate_table) > +{ > + u32 postdiv, val; > + > + val = readl(pll->pll_base + PLL_FRACMODE_REG); > + rate_table->dacen = (val >> 4) & 0x1; What is 0x1? Some bitfield? Can it be a #define at least? Same for 4. Better yet, use GENMASK and FIELD_PREP() and FIELD_GET() macros. > + rate_table->dsmen = val & 0x1; > + rate_table->fracin = readl(pll->pll_base + PLL_FRACIN_REG) & PLL_FRACIN_MASK; > + rate_table->intin = readl(pll->pll_base + PLL_INTIN_REG) & PLL_INTIN_MASK; > + rate_table->refdiv = readl(pll->pll_base + PLL_REFDIV_REG) & PLL_REFDIV_MASK; > + > + postdiv = readl(pll->pll_base + PLL_POSTDIV_REG); > + rate_table->postdiv1 = postdiv & PLL_POSTDIV_MASK; > + rate_table->postdiv2 = (postdiv >> 4) & PLL_POSTDIV_MASK; > +} > + > +static const struct visconti_pll_rate_table *visconti_get_pll_settings(struct visconti_pll *pll, > + unsigned long rate) > +{ > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > + int i; > + > + for (i = 0; i < pll->rate_count; i++) { > + if (rate == rate_table[i].rate) > + return &rate_table[i]; > + } Drop braces please. > + > + return NULL; > +} > + > +static unsigned long visconti_get_pll_rate_from_data(struct visconti_pll *pll, > + struct visconti_pll_rate_table *rate) const pointers? > +{ > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > + int i; > + > + for (i = 0; i < pll->rate_count; i++) { > + if (rate_table[i].dacen == rate->dacen && > + rate_table[i].dsmen == rate->dsmen && > + rate_table[i].fracin == rate->fracin && > + rate_table[i].intin == rate->intin && > + rate_table[i].refdiv == rate->refdiv && > + rate_table[i].postdiv1 == rate->postdiv1 && > + rate_table[i].postdiv2 == rate->postdiv2) Is it not the same table? Can we just compare the two pointers instead of each member? > + return rate_table[i].rate; > + } > + > + /* set default */ > + return rate_table[0].rate; > +} > + > +static long visconti_pll_round_rate(struct clk_hw *hw, > + unsigned long rate, unsigned long *prate) > +{ > + struct visconti_pll *pll = to_visconti_pll(hw); > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > + int i; > + > + /* Assumming rate_table is in descending order */ > + for (i = 0; i < pll->rate_count; i++) { > + if (rate >= rate_table[i].rate) > + return rate_table[i].rate; > + } Drop braces please. > + > + /* return minimum supported value */ > + return rate_table[i - 1].rate; > +} > + > +static unsigned long visconti_pll_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct visconti_pll *pll = to_visconti_pll(hw); > + struct visconti_pll_rate_table rate_table; > + > + memset(&rate_table, 0, sizeof(rate_table)); > + visconti_pll_get_params(pll, &rate_table); > + > + return visconti_get_pll_rate_from_data(pll, &rate_table); Oh. Can we do math instead? > +} > + > +static int visconti_pll_set_params(struct visconti_pll *pll, > + const struct visconti_pll_rate_table *rate_table) > +{ > + /* update pll values */ This comment is worthless. Please remove. > + writel(((rate_table->dacen << 4) | rate_table->dsmen), One too many parenthesis here. Please clean it up. > + pll->pll_base + PLL_FRACMODE_REG); > + writel(((rate_table->postdiv2 << 4) | rate_table->postdiv1), Same. > + pll->pll_base + PLL_POSTDIV_REG); > + writel(rate_table->intin, pll->pll_base + PLL_INTIN_REG); > + writel(rate_table->fracin, pll->pll_base + PLL_FRACIN_REG); > + writel(rate_table->refdiv, pll->pll_base + PLL_REFDIV_REG); > + > + return 0; > +} > + > +static int visconti_pll_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct visconti_pll *pll = to_visconti_pll(hw); > + const struct visconti_pll_rate_table *rate_table; > + > + /* Get required rate settings from table */ This comment is worthless, please remove. > + rate_table = visconti_get_pll_settings(pll, rate); > + if (!rate_table) { > + pr_err("Invalid rate : %lu for pll clk %s\n", Please don't print anything during set_rate. It can be quite noisy if something like a cpufreq driver keeps calling this with the incorrect frequency. > + parent_rate, __clk_get_name(hw->clk)); > + return -EINVAL; > + } > + > + return visconti_pll_set_params(pll, rate_table); > +} > + > +static int visconti_pll_is_enabled(struct clk_hw *hw) > +{ > + struct visconti_pll *pll = to_visconti_pll(hw); > + unsigned long flags; > + u32 reg; > + > + spin_lock_irqsave(pll->lock, flags); > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + spin_unlock_irqrestore(pll->lock, flags); Don't think we need a spinlock to read a register. After this unlocks it can be disabled anyway, so what's the point to locking here? > + > + return (reg & PLL_PLLEN); > +} > + > +static int visconti_pll_enable(struct clk_hw *hw) > +{ > + struct visconti_pll *pll = to_visconti_pll(hw); > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > + unsigned long flags; > + u32 reg; > + > + if (visconti_pll_is_enabled(hw)) > + return 0; Drop. > + > + spin_lock_irqsave(pll->lock, flags); > + > + /* Change to access via register */ > + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG); > + > + /* Change to BYPASS mode */ > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + reg |= PLL_BYPASS; > + writel(reg, pll->pll_base + PLL_CTRL_REG); > + > + /* Set DIV register .....*/ > + visconti_pll_set_params(pll, &rate_table[0]); > + > + /* Disable PLL register */ > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + reg &= ~PLL_PLLEN; > + writel(reg, pll->pll_base + PLL_CTRL_REG); > + > + /* Wait 1us */ > + udelay(1); > + > + /* Enable PLL register */ > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + reg |= PLL_PLLEN; > + writel(reg, pll->pll_base + PLL_CTRL_REG); > + > + /* Wait 40us */ > + udelay(40); > + > + /* Change to PLL mode */ Every comment in here is saying what the code is doing. Please remove them. > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + reg &= ~PLL_BYPASS; > + writel(reg, pll->pll_base + PLL_CTRL_REG); > + > + spin_unlock_irqrestore(pll->lock, flags); > + > + return 0; > +} > + > +static void visconti_pll_disable(struct clk_hw *hw) > +{ > + struct visconti_pll *pll = to_visconti_pll(hw); > + unsigned long flags; > + u32 reg; > + > + if (!visconti_pll_is_enabled(hw)) > + return; > + > + spin_lock_irqsave(pll->lock, flags); > + > + /* Change to access via register */ This comment is almost useful, except I don't know why we need to change access, which is the important part. > + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG); > + > + /* Change to BYPASS mode */ > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + reg |= PLL_BYPASS; > + writel(reg, pll->pll_base + PLL_CTRL_REG); > + > + /* PLL disable */ > + reg = readl(pll->pll_base + PLL_CTRL_REG); > + reg &= ~PLL_PLLEN; > + writel(reg, pll->pll_base + PLL_CTRL_REG); > + > + spin_unlock_irqrestore(pll->lock, flags); > +} > + > +static const struct clk_ops visconti_pll_ops = { > + .enable = visconti_pll_enable, > + .disable = visconti_pll_disable, > + .is_enabled = visconti_pll_is_enabled, > + .round_rate = visconti_pll_round_rate, > + .recalc_rate = visconti_pll_recalc_rate, > + .set_rate = visconti_pll_set_rate, > +}; > + > +static struct clk *visconti_register_pll(struct visconti_pll_provider *ctx, > + const char *name, > + const char *parent_name, > + int offset, > + const struct visconti_pll_rate_table *rate_table, > + u8 clk_pll_flags, Are the flags used? > + spinlock_t *lock) > +{ > + struct clk_init_data init; > + struct visconti_pll *pll; > + struct clk *pll_clk; > + int len; > + > + pll = kzalloc(sizeof(*pll), GFP_KERNEL); > + if (!pll) > + return ERR_PTR(-ENOMEM); > + > + /* Create the actual pll */ Worthless comment. > + init.name = name; > + init.flags = CLK_IGNORE_UNUSED; > + init.parent_names = &parent_name; > + init.num_parents = 1; > + > + for (len = 0; rate_table[len].rate != 0; ) > + len++; > + pll->rate_count = len; > + pll->rate_table = kmemdup(rate_table, > + pll->rate_count * sizeof(struct visconti_pll_rate_table), > + GFP_KERNEL); Do we need to duplicate the table? Can't that be const? > + WARN(!pll->rate_table, "%s: could not allocate rate table for %s\n", __func__, name); > + > + init.ops = &visconti_pll_ops; > + pll->hw.init = &init; > + pll->pll_base = ctx->reg_base + offset; > + pll->flags = clk_pll_flags; > + pll->lock = lock; > + pll->ctx = ctx; > + > + pll_clk = clk_register(NULL, &pll->hw); Please use clk_hw_register(). > + if (IS_ERR(pll_clk)) { > + pr_err("failed to register pll clock %s : %ld\n", name, PTR_ERR(pll_clk)); > + kfree(pll); > + } > + > + return pll_clk; > +} > + > +static void visconti_pll_add_lookup(struct visconti_pll_provider *ctx, struct clk *clk, > + unsigned int id) > +{ > + if (ctx->clk_data.clks && id) > + ctx->clk_data.clks[id] = clk; > +} > + > +void __init visconti_register_plls(struct visconti_pll_provider *ctx, > + const struct visconti_pll_info *list, > + unsigned int nr_plls, > + spinlock_t *lock) > +{ > + int idx; > + > + for (idx = 0; idx < nr_plls; idx++, list++) { > + struct clk *clk; > + > + clk = visconti_register_pll(ctx, > + list->name, > + list->parent, > + list->base_reg, > + list->rate_table, > + list->flags, > + lock); > + if (IS_ERR(clk)) { > + pr_err("failed to register clock %s\n", list->name); > + continue; > + } > + > + visconti_pll_add_lookup(ctx, clk, list->id); > + } > +} > + > +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, > + void __iomem *base, > + unsigned long nr_plls) > +{ > + struct visconti_pll_provider *ctx; > + struct clk **clk_table; > + int i; > + > + ctx = kzalloc(sizeof(struct visconti_pll_provider), GFP_KERNEL); > + if (!ctx) > + return ERR_PTR(-ENOMEM); > + > + clk_table = kcalloc(nr_plls, sizeof(struct clk *), GFP_KERNEL); > + if (!clk_table) > + goto err; > + > + for (i = 0; i < nr_plls; ++i) > + clk_table[i] = ERR_PTR(-ENOENT); > + > + ctx->node = np; > + ctx->reg_base = base; > + ctx->clk_data.clks = clk_table; > + ctx->clk_data.clk_num = nr_plls; > + > + return ctx; > + > +err: > + kfree(ctx); > + return ERR_PTR(-ENOMEM); > +} > diff --git a/drivers/clk/visconti/pll.h b/drivers/clk/visconti/pll.h > new file mode 100644 > index 000000000000..ce0ce1d8cd88 > --- /dev/null > +++ b/drivers/clk/visconti/pll.h > @@ -0,0 +1,63 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2021 TOSHIBA CORPORATION > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > + * > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + */ > + > +#ifndef _VISCONTI_PLL_H_ > +#define _VISCONTI_PLL_H_ > + > +#include <linux/clk-provider.h> > +#include <linux/regmap.h> > +#include <linux/spinlock.h> > + > +struct visconti_pll_provider { > + void __iomem *reg_base; > + struct regmap *regmap; > + struct clk_onecell_data clk_data; > + struct device_node *node; > +}; > + > +#define VISCONTI_PLL_RATE(_rate, _dacen, _dsmen, \ > + _refdiv, _intin, _fracin, _postdiv1, _postdiv2) \ > +{ \ > + .rate = _rate, \ > + .dacen = _dacen, \ > + .dsmen = _dsmen, \ > + .refdiv = _refdiv, \ > + .intin = _intin, \ > + .fracin = _fracin, \ > + .postdiv1 = _postdiv1, \ > + .postdiv2 = _postdiv2 \ > +} > + > +struct visconti_pll_rate_table { > + unsigned long rate; > + unsigned int dacen; > + unsigned int dsmen; > + unsigned int refdiv; > + unsigned long intin; > + unsigned long fracin; > + unsigned int postdiv1; > + unsigned int postdiv2; > +}; > + > +struct visconti_pll_info { > + unsigned int id; > + const char *name; > + const char *parent; > + u8 flags; > + unsigned long base_reg; > + const struct visconti_pll_rate_table *rate_table; > +}; > + > +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, > + void __iomem *base, > + unsigned long nr_plls); > +void __init visconti_register_plls(struct visconti_pll_provider *ctx, __init can be dropped from header files. It serves no purpose. > + const struct visconti_pll_info *list, > + unsigned int nr_plls, spinlock_t *lock); > + > +#endif /* _VISCONTI_PLL_H_ */
Hi, Thanks for your review. On Sat, Aug 28, 2021 at 10:08:20PM -0700, Stephen Boyd wrote: > Quoting Nobuhiro Iwamatsu (2021-08-04 02:22:43) > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > > index 5f06879d7fe9..dbf70fdecfc8 100644 > > --- a/drivers/clk/Makefile > > +++ b/drivers/clk/Makefile > > @@ -116,6 +116,7 @@ obj-y += ti/ > > obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ > > obj-$(CONFIG_ARCH_U8500) += ux500/ > > obj-y += versatile/ > > +obj-$(CONFIG_ARCH_VISCONTI) += visconti/ > > Can we have an actual Kconfig symbol for this so we can compile test the > driver? I will add in next version. > > > ifeq ($(CONFIG_COMMON_CLK), y) > > obj-$(CONFIG_X86) += x86/ > > endif > > diff --git a/drivers/clk/visconti/Makefile b/drivers/clk/visconti/Makefile > > new file mode 100644 > > index 000000000000..c1254fd52b31 > > --- /dev/null > > +++ b/drivers/clk/visconti/Makefile > > @@ -0,0 +1,5 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > +# Makefile for Toshiba Visconti clock > > + > > +obj-y += clkc.o pll.o reset.o > > +obj-y += pll-tmpv770x.o clkc-tmpv770x.o > > diff --git a/drivers/clk/visconti/clkc-tmpv770x.c b/drivers/clk/visconti/clkc-tmpv770x.c > > new file mode 100644 > > index 000000000000..6ee5c5179f7c > > --- /dev/null > > +++ b/drivers/clk/visconti/clkc-tmpv770x.c > > @@ -0,0 +1,232 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Toshiba Visconti clock controller > > + * > > + * Copyright (c) 2021 TOSHIBA CORPORATION > > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > > + * > > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > > + */ > > + > > +#include <dt-bindings/clock/toshiba,tmpv770x.h> > > +#include <dt-bindings/reset/toshiba,tmpv770x.h> > > Please include these after linux headers. I will move this. > > > +#include <linux/clk.h> > > Is it a clk provider or a clk consumer? Hopefully it's a clk provider, > and thus this should be clk-provider.h instead of clk.h for the > consumer. I will change to use clk-provider.h. > > > +#include <linux/platform_device.h> > > + > > +#include "clkc.h" > > +#include "reset.h" > > + > > +static DEFINE_SPINLOCK(tmpv770x_clk_lock); > > +static DEFINE_SPINLOCK(tmpv770x_rst_lock); > > + > > +static const struct visconti_fixed_clk fixed_clk_tables[] = { > > + /* PLL1 */ > > + /* PICMPT0/1, PITSC, PIUWDT, PISWDT, PISBUS, PIPMU, PIGPMU, PITMU */ > > + /* PIEMM, PIMISC, PIGCOMM, PIDCOMM, PIMBUS, PIGPIO, PIPGM */ > > + { TMPV770X_CLK_PIPLL1_DIV4, "pipll1_div4", "pipll1", 0, 1, 4, }, > > + /* PISBUS */ > > + { TMPV770X_CLK_PIPLL1_DIV2, "pipll1_div2", "pipll1", 0, 1, 2, }, > > + /* PICOBUS_CLK */ > > + { TMPV770X_CLK_PIPLL1_DIV1, "pipll1_div1", "pipll1", 0, 1, 1, }, > > + /* PIDNNPLL */ > > + /* CONN_CLK, PIMBUS, PICRC0/1 */ > > + { TMPV770X_CLK_PIDNNPLL_DIV1, "pidnnpll_div1", "pidnnpll", 0, 1, 1, }, > > + { TMPV770X_CLK_PIREFCLK, "pirefclk", "osc2-clk", 0, 1, 1, }, > > + { TMPV770X_CLK_WDTCLK, "wdtclk", "osc2-clk", 0, 1, 1, }, > > +}; > > + > > +static const struct visconti_clk_gate_table pietherpll_clk_gate_tables[] = { > > + /* pietherpll */ > > + { TMPV770X_CLK_PIETHER_2P5M, "piether_2p5m", "pietherpll", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 4, 200, > > There's quite a lot of CLK_IGNORE_UNUSED. Should these be > CLK_IS_CRITICAL instead, and then only the ones that are truly critical > to the system still running should be marked as critical along with a > comment explaining what they're clocking and why that device isn't > probing and enabling the clks itself. I see. I will recheck and update this table. > > > + TMPV770X_RESET_PIETHER_2P5M, }, > > + { TMPV770X_CLK_PIETHER_25M, "piether_25m", "pietherpll", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 5, 20, > > + TMPV770X_RESET_PIETHER_25M, }, > > + { TMPV770X_CLK_PIETHER_50M, "piether_50m", "pietherpll", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 6, 10, > > + TMPV770X_RESET_PIETHER_50M, }, > > + { TMPV770X_CLK_PIETHER_125M, "piether_125m", "pietherpll", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 7, 4, > > + TMPV770X_RESET_PIETHER_125M, }, > > +}; > > + > > +static const struct visconti_clk_gate_table clk_gate_tables[] = { > > + { TMPV770X_CLK_HOX, "hox", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x4C, 0x14C, 0, 1, > > Lowercase hex please. I will fix in next version. > > > + TMPV770X_RESET_HOX, }, > > + { TMPV770X_CLK_PCIE_MSTR, "pcie_mstr", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 0, 1, > > + TMPV770X_RESET_PCIE_MSTR, }, > > + { TMPV770X_CLK_PCIE_AUX, "pcie_aux", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 1, 24, > > + TMPV770X_RESET_PCIE_AUX, }, > > + { TMPV770X_CLK_PIINTC, "piintc", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x8, 0x108, 0, 2, > > + TMPV770X_RESET_PIINTC,}, > > + { TMPV770X_CLK_PIETHER_BUS, "piether_bus", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 0, 2, > > + TMPV770X_RESET_PIETHER_BUS, }, /* BUS_CLK */ > > + { TMPV770X_CLK_PISPI0, "pispi0", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 0, 2, > > + TMPV770X_RESET_PISPI0, }, > > + { TMPV770X_CLK_PISPI1, "pispi1", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 1, 2, > > + TMPV770X_RESET_PISPI1, }, > > + { TMPV770X_CLK_PISPI2, "pispi2", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 2, 2, > > + TMPV770X_RESET_PISPI2, }, > > + { TMPV770X_CLK_PISPI3, "pispi3", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 3, 2, > > + TMPV770X_RESET_PISPI3,}, > > + { TMPV770X_CLK_PISPI4, "pispi4", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 4, 2, > > + TMPV770X_RESET_PISPI4, }, > > + { TMPV770X_CLK_PISPI5, "pispi5", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 5, 2, > > + TMPV770X_RESET_PISPI5}, > > + { TMPV770X_CLK_PISPI6, "pispi6", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 6, 2, > > + TMPV770X_RESET_PISPI6,}, > > + { TMPV770X_CLK_PIUART0, "piuart0", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 0, 4, > > + TMPV770X_RESET_PIUART0,}, > > + { TMPV770X_CLK_PIUART1, "piuart1", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 1, 4, > > + TMPV770X_RESET_PIUART1, }, > > + { TMPV770X_CLK_PIUART2, "piuart2", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 2, 4, > > + TMPV770X_RESET_PIUART2, }, > > + { TMPV770X_CLK_PIUART3, "piuart3", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 3, 4, > > + TMPV770X_RESET_PIUART3, }, > > + { TMPV770X_CLK_PII2C0, "pii2c0", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 0, 4, > > + TMPV770X_RESET_PII2C0, }, > > + { TMPV770X_CLK_PII2C1, "pii2c1", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 1, 4, > > + TMPV770X_RESET_PII2C1, }, > > + { TMPV770X_CLK_PII2C2, "pii2c2", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 2, 4, > > + TMPV770X_RESET_PII2C2, }, > > + { TMPV770X_CLK_PII2C3, "pii2c3", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 3, 4, > > + TMPV770X_RESET_PII2C3,}, > > + { TMPV770X_CLK_PII2C4, "pii2c4", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 4, 4, > > + TMPV770X_RESET_PII2C4, }, > > + { TMPV770X_CLK_PII2C5, "pii2c5", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 5, 4, > > + TMPV770X_RESET_PII2C5, }, > > + { TMPV770X_CLK_PII2C6, "pii2c6", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 6, 4, > > + TMPV770X_RESET_PII2C6, }, > > + { TMPV770X_CLK_PII2C7, "pii2c7", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 7, 4, > > + TMPV770X_RESET_PII2C7, }, > > + { TMPV770X_CLK_PII2C8, "pii2c8", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 8, 4, > > + TMPV770X_RESET_PII2C8, }, > > + /* PIPCMIF */ > > + { TMPV770X_CLK_PIPCMIF, "pipcmif", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x64, 0x164, 0, 4, > > + TMPV770X_RESET_PIPCMIF, }, > > + /* PISYSTEM */ > > + { TMPV770X_CLK_WRCK, "wrck", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x68, 0x168, 9, 32, > > + -1, }, /* No reset */ > > + { TMPV770X_CLK_PICKMON, "pickmon", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x10, 0x110, 8, 4, > > + TMPV770X_RESET_PICKMON, }, > > + { TMPV770X_CLK_SBUSCLK, "sbusclk", "pipll1", > > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x14, 0x114, 0, 4, > > + TMPV770X_RESET_SBUSCLK, }, > > +}; > > + > > +static const struct visconti_reset_data clk_reset_data[] = { > > + [TMPV770X_RESET_PIETHER_2P5M] = { 0x434, 0x534, 4, }, > > + [TMPV770X_RESET_PIETHER_25M] = { 0x434, 0x534, 5, }, > > + [TMPV770X_RESET_PIETHER_50M] = { 0x434, 0x534, 6, }, > > + [TMPV770X_RESET_PIETHER_125M] = { 0x434, 0x534, 7, }, > > + [TMPV770X_RESET_HOX] = { 0x44C, 0x54C, 0, }, > > + [TMPV770X_RESET_PCIE_MSTR] = { 0x438, 0x538, 0, }, > > + [TMPV770X_RESET_PCIE_AUX] = { 0x438, 0x538, 1, }, > > + [TMPV770X_RESET_PIINTC] = { 0x408, 0x508, 0, }, > > + [TMPV770X_RESET_PIETHER_BUS] = { 0x434, 0x534, 0, }, > > + [TMPV770X_RESET_PISPI0] = { 0x428, 0x528, 0, }, > > + [TMPV770X_RESET_PISPI1] = { 0x428, 0x528, 1, }, > > + [TMPV770X_RESET_PISPI2] = { 0x428, 0x528, 2, }, > > + [TMPV770X_RESET_PISPI3] = { 0x428, 0x528, 3, }, > > + [TMPV770X_RESET_PISPI4] = { 0x428, 0x528, 4, }, > > + [TMPV770X_RESET_PISPI5] = { 0x428, 0x528, 5, }, > > + [TMPV770X_RESET_PISPI6] = { 0x428, 0x528, 6, }, > > + [TMPV770X_RESET_PIUART0] = { 0x42C, 0x52C, 0, }, > > + [TMPV770X_RESET_PIUART1] = { 0x42C, 0x52C, 1, }, > > + [TMPV770X_RESET_PIUART2] = { 0x42C, 0x52C, 2, }, > > + [TMPV770X_RESET_PIUART3] = { 0x42C, 0x52C, 3, }, > > + [TMPV770X_RESET_PII2C0] = { 0x430, 0x530, 0, }, > > + [TMPV770X_RESET_PII2C1] = { 0x430, 0x530, 1, }, > > + [TMPV770X_RESET_PII2C2] = { 0x430, 0x530, 2, }, > > + [TMPV770X_RESET_PII2C3] = { 0x430, 0x530, 3, }, > > + [TMPV770X_RESET_PII2C4] = { 0x430, 0x530, 4, }, > > + [TMPV770X_RESET_PII2C5] = { 0x430, 0x530, 5, }, > > + [TMPV770X_RESET_PII2C6] = { 0x430, 0x530, 6, }, > > + [TMPV770X_RESET_PII2C7] = { 0x430, 0x530, 7, }, > > + [TMPV770X_RESET_PII2C8] = { 0x430, 0x530, 8, }, > > + [TMPV770X_RESET_PIPCMIF] = { 0x464, 0x564, 0, }, > > + [TMPV770X_RESET_PICKMON] = { 0x410, 0x510, 8, }, > > + [TMPV770X_RESET_SBUSCLK] = { 0x414, 0x514, 0, }, > > +}; > > + > > +static void __init tmpv770x_clkc_setup_clks(struct device_node *np) > > +{ > > + struct visconti_clk_provider *ctx; > > + struct regmap *regmap; > > + int ret, i; > > + > > + regmap = device_node_to_regmap(np); > > Is it inside a syscon? Yes, this IP works as syscon. I will fix to use syscon. > > > + if (IS_ERR(regmap)) > > + return; > > + > > + ctx = visconti_init_clk(np, regmap, TMPV770X_NR_CLK); > > + if (IS_ERR(ctx)) > > + return; > > + > > + ret = visconti_register_reset_controller(np, regmap, clk_reset_data, > > + TMPV770X_NR_RESET, > > + &visconti_reset_ops, > > + &tmpv770x_rst_lock); > > + if (ret) { > > + pr_err("Failed to register reset controller: %d\n", ret); > > + return; > > + } > > + > > + for (i = 0; i < (ARRAY_SIZE(fixed_clk_tables)); i++) > > + ctx->clk_data.clks[fixed_clk_tables[i].id] = > > + clk_register_fixed_factor(NULL, > > + fixed_clk_tables[i].name, > > + fixed_clk_tables[i].parent, > > + fixed_clk_tables[i].flag, > > + fixed_clk_tables[i].mult, > > + fixed_clk_tables[i].div); > > + > > + ret = visconti_clk_register_gates(ctx, clk_gate_tables, > > + ARRAY_SIZE(clk_gate_tables), clk_reset_data, > > + &tmpv770x_clk_lock); > > + if (ret) { > > + pr_err("Failed to register main clock gate: %d\n", ret); > > + return; > > + } > > + > > + ret = visconti_clk_register_gates(ctx, pietherpll_clk_gate_tables, > > + ARRAY_SIZE(pietherpll_clk_gate_tables), > > + clk_reset_data, &tmpv770x_clk_lock); > > + if (ret) { > > + pr_err("Failed to register pietherpll clock gate: %d\n", ret); > > + return; > > + } > > + > > + of_clk_add_provider(np, of_clk_src_onecell_get, &ctx->clk_data); > > +} > > + > > +CLK_OF_DECLARE_DRIVER(tmpv770x_clkc, "toshiba,tmpv7708-pismu", tmpv770x_clkc_setup_clks); > > Any chance this can be a platform driver? > OK , I will update to platform driver. > > diff --git a/drivers/clk/visconti/clkc.c b/drivers/clk/visconti/clkc.c > > new file mode 100644 > > index 000000000000..32b6f6266154 > > --- /dev/null > > +++ b/drivers/clk/visconti/clkc.c > > @@ -0,0 +1,220 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Toshiba Visconti clock controller > > + * > > + * Copyright (c) 2021 TOSHIBA CORPORATION > > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > > + * > > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > > + */ > > +#include <linux/clk-provider.h> > > +#include <linux/delay.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/regmap.h> > > +#include <linux/slab.h> > > +#include <linux/string.h> > > + > > +#include "clkc.h" > > + > > +static inline struct visconti_clk_gate *to_visconti_clk_gate(struct clk_hw *hw) > > +{ > > + return container_of(hw, struct visconti_clk_gate, hw); > > +} > > + > > +static int visconti_gate_clk_is_enabled(struct clk_hw *hw) > > +{ > > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); > > + u32 clk = BIT(gate->ck_idx); > > + u32 val; > > + > > + regmap_read(gate->regmap, gate->ckon_offset, &val); > > + return (val & clk) ? 1 : 0; > > +} > > + > > +static void visconti_gate_clk_disable(struct clk_hw *hw) > > +{ > > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); > > + u32 clk = BIT(gate->ck_idx); > > + u32 rst = BIT(gate->rs_idx); > > + unsigned long flags; > > + > > + spin_lock_irqsave(gate->lock, flags); > > + > > + if (visconti_gate_clk_is_enabled(hw)) { > > So we never disable the clk? Thanks. I will fix. > > > + spin_unlock_irqrestore(gate->lock, flags); > > + return; > > + } > > + > > + /* Reset release */ > > + regmap_update_bits(gate->regmap, gate->rson_offset, rst, 1); > > + > > + udelay(100); > > + > > + /* Disable clock */ > > + regmap_update_bits(gate->regmap, gate->ckoff_offset, clk, 1); > > + spin_unlock_irqrestore(gate->lock, flags); > > +} > > + > > +static int visconti_gate_clk_enable(struct clk_hw *hw) > > +{ > > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); > > + u32 clk = BIT(gate->ck_idx); > > + u32 rst = BIT(gate->rs_idx); > > + unsigned long flags; > > + u32 val; > > + > > + spin_lock_irqsave(gate->lock, flags); > > + > > + if (visconti_gate_clk_is_enabled(hw)) { > > The core framework should only call down to here if the clk is actually > disabled. This check can be removed. > OK, I will remove this check. > > + spin_unlock_irqrestore(gate->lock, flags); > > + return 0; > > + } > > + > > + regmap_update_bits(gate->regmap, gate->ckon_offset, clk, 1); > > + /* Need read back */ > > Why? Please indicate why instead of just saying what the code is doing. > This was an unnecessary operation. I will delete. > > + regmap_read(gate->regmap, gate->ckon_offset, &val); > > + > > + udelay(100); > > + /* Reset release */ > > + regmap_update_bits(gate->regmap, gate->rsoff_offset, rst, 1); > > + /* Need read back */ > > + regmap_read(gate->regmap, gate->ckoff_offset, &val); > > + spin_unlock_irqrestore(gate->lock, flags); > > + > > + return 0; > > +} > > + > > +static const struct clk_ops visconti_clk_gate_ops = { > > + .enable = visconti_gate_clk_enable, > > + .disable = visconti_gate_clk_disable, > > + .is_enabled = visconti_gate_clk_is_enabled, > > +}; > > + > > +static struct clk_hw *visconti_clk_register_gate(struct device *dev, > > + const char *name, > > + const char *parent_name, > > + struct regmap *regmap, > > + const struct visconti_clk_gate_table *clks, > > + u32 rson_offset, > > + u32 rsoff_offset, > > + u8 rs_idx, > > + spinlock_t *lock) > > +{ > > + struct visconti_clk_gate *gate; > > + struct clk_init_data init; > > + struct clk_hw *hw; > > + int ret; > > + > > + gate = kzalloc(sizeof(*gate), GFP_KERNEL); > > + if (!gate) > > + return ERR_PTR(-ENOMEM); > > + > > + init.name = name; > > + init.ops = &visconti_clk_gate_ops; > > + init.flags = clks->flags; > > + init.parent_names = parent_name ? &parent_name : NULL; > > + init.num_parents = parent_name ? 1 : 0; > > Do some clks have parents and other clks don't? Or do they always have > parents? Preferably it's one or the other. And if there are parents, > please use clk_parent_data instead of parent_names. > OK, I will update to use clk_parent_data. > > + > > + gate->regmap = regmap; > > + gate->ckon_offset = clks->ckon_offset; > > + gate->ckoff_offset = clks->ckoff_offset; > > + gate->ck_idx = clks->ck_idx; > > + gate->rson_offset = rson_offset; > > + gate->rsoff_offset = rsoff_offset; > > + gate->rs_idx = rs_idx; > > + gate->lock = lock; > > + gate->hw.init = &init; > > + > > + hw = &gate->hw; > > + ret = clk_hw_register(dev, hw); > > Is the dev non-NULL? If yes then can devm be used? > I will update to use devm. > > + if (ret) { > > + kfree(gate); > > + hw = ERR_PTR(ret); > > + } > > + > > + return hw; > > +} > > + > > +int visconti_clk_register_gates(struct visconti_clk_provider *data, > > + const struct visconti_clk_gate_table *clks, > > + int num_gate, const struct visconti_reset_data *reset, > > + spinlock_t *lock) > > +{ > > + u32 rson_offset, rsoff_offset; > > + struct clk_hw *hw_clk; > > + u8 rs_idx; > > + int i; > > + > > + for (i = 0; i < num_gate; i++) { > > + struct clk *clk; > > + char *div_name; > > + > > + div_name = kasprintf(GFP_KERNEL, "%s_div", clks[i].name); > > + if (!div_name) > > + return -ENOMEM; > > + > > + if (clks[i].rs_id >= 0) { > > + rson_offset = reset[clks[i].rs_id].rson_offset; > > + rsoff_offset = reset[clks[i].rs_id].rsoff_offset; > > + rs_idx = reset[clks[i].rs_id].rs_idx; > > + } else { > > + rson_offset = rsoff_offset = rs_idx = -1; > > + } > > + > > + clk = clk_register_fixed_factor(NULL, div_name, clks[i].parent, > > + 0, 1, clks[i].div); > > + if (IS_ERR(clk)) > > + return PTR_ERR(clk); > > + > > + hw_clk = visconti_clk_register_gate(NULL, > > Oh it's always NULL? Sad I will update this fuction, and avoid using NULL. > > > + clks[i].name, > > + div_name, > > + data->regmap, > > + &clks[i], > > + rson_offset, > > + rsoff_offset, > > + rs_idx, > > + lock); > > + kfree(div_name); > > + if (IS_ERR(hw_clk)) { > > + pr_err("%s: failed to register clock %s\n", > > + __func__, clks[i].name); > > + return PTR_ERR(hw_clk); > > + } > > + > > + data->clk_data.clks[clks[i].id] = hw_clk->clk; > > + } > > + > > + return 0; > > +} > > + > > +struct visconti_clk_provider *visconti_init_clk(struct device_node *np, > > + struct regmap *regmap, > > + unsigned long nr_clks) > > +{ > > + struct visconti_clk_provider *ctx; > > + struct clk **clk_table; > > + int i; > > + > > + ctx = kzalloc(sizeof(struct visconti_clk_provider), GFP_KERNEL); > > sizeof(*ctx)? I will fix. > > > + if (!ctx) > > + return ERR_PTR(-ENOMEM); > > + > > + clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL); > > sizeof(*clk_table)? > I will fix. > > + if (!clk_table) > > + goto err; > > + > > + for (i = 0; i < nr_clks; ++i) > > + clk_table[i] = ERR_PTR(-ENOENT); > > + ctx->node = np; > > + ctx->regmap = regmap; > > + ctx->clk_data.clks = clk_table; > > + ctx->clk_data.clk_num = nr_clks; > > + > > + return ctx; > > +err: > > + kfree(ctx); > > + return ERR_PTR(-ENOMEM); > > +} > > diff --git a/drivers/clk/visconti/clkc.h b/drivers/clk/visconti/clkc.h > > new file mode 100644 > > index 000000000000..4df8788d635a > > --- /dev/null > > +++ b/drivers/clk/visconti/clkc.h > > @@ -0,0 +1,75 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * Toshiba Visconti clock controller > > + * > > + * Copyright (c) 2021 TOSHIBA CORPORATION > > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > > + * > > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > > + */ > > + > > +#ifndef _VISCONTI_CLKC_H_ > > +#define _VISCONTI_CLKC_H_ > > + > > +#include <linux/mfd/syscon.h> > > +#include <linux/clk-provider.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/delay.h> > > +#include <linux/regmap.h> > > +#include <linux/slab.h> > > +#include <linux/string.h> > > +#include <linux/io.h> > > +#include <linux/spinlock.h> > > + > > +#include "reset.h" > > + > > +struct visconti_clk_provider { > > + struct device_node *node; > > + struct regmap *regmap; > > + struct clk_onecell_data clk_data; > > +}; > > + > > +struct visconti_clk_gate_table { > > + unsigned int id; > > + const char *name; > > + const char *parent; > > + u8 flags; > > + u32 ckon_offset; > > + u32 ckoff_offset; > > + u8 ck_idx; > > + unsigned int div; > > + u8 rs_id; > > +}; > > + > > +struct visconti_fixed_clk { > > + unsigned int id; > > + const char *name; > > + const char *parent; > > + unsigned long flag; > > + unsigned int mult; > > + unsigned int div; > > +}; > > + > > +struct visconti_clk_gate { > > + struct clk_hw hw; > > + struct regmap *regmap; > > + u32 ckon_offset; > > + u32 ckoff_offset; > > + u8 ck_idx; > > + u8 flags; > > + u32 rson_offset; > > + u32 rsoff_offset; > > + u8 rs_idx; > > + spinlock_t *lock; > > +}; > > + > > +struct visconti_clk_provider *visconti_init_clk(struct device_node *np, > > + struct regmap *regmap, > > + unsigned long nr_clks); > > +int visconti_clk_register_gates(struct visconti_clk_provider *data, > > + const struct visconti_clk_gate_table *clks, > > + int num_gate, > > + const struct visconti_reset_data *reset, > > + spinlock_t *lock); > > +#endif /* _VISCONTI_CLKC_H_ */ > > diff --git a/drivers/clk/visconti/pll-tmpv770x.c b/drivers/clk/visconti/pll-tmpv770x.c > > new file mode 100644 > > index 000000000000..a0874cb6a67b > > --- /dev/null > > +++ b/drivers/clk/visconti/pll-tmpv770x.c > > @@ -0,0 +1,85 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Toshiba Visconti PLL controller > > + * > > + * Copyright (c) 2021 TOSHIBA CORPORATION > > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > > + * > > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > > + */ > > + > > +#include <dt-bindings/clock/toshiba,tmpv770x.h> > > +#include <linux/clk.h> > > +#include <linux/clk-provider.h> > > +#include <linux/of_address.h> > > +#include <linux/slab.h> > > + > > +#include "pll.h" > > + > > +static DEFINE_SPINLOCK(tmpv770x_pll_lock); > > + > > +static const struct visconti_pll_rate_table pipll0_rates[] __initconst = { > > + VISCONTI_PLL_RATE(840000000, 0x1, 0x0, 0x1, 0x54, 0x000000, 0x2, 0x1), > > + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1), > > + VISCONTI_PLL_RATE(600000000, 0x1, 0x0, 0x1, 0x3C, 0x000000, 0x2, 0x1), > > + { /* sentinel */ }, > > +}; > > + > > +static const struct visconti_pll_rate_table piddrcpll_rates[] __initconst = { > > + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1), > > + VISCONTI_PLL_RATE(760000000, 0x1, 0x0, 0x1, 0x4C, 0x000000, 0x2, 0x1), > > + { /* sentinel */ }, > > +}; > > + > > +static const struct visconti_pll_rate_table pivoifpll_rates[] __initconst = { > > + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2), > > + VISCONTI_PLL_RATE(148500000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x2), > > + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2), > > + VISCONTI_PLL_RATE(74250000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x4), > > + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4), > > + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4), > > + VISCONTI_PLL_RATE(35750000, 0x1, 0x1, 0x1, 0x32, 0x0CCCCC, 0x7, 0x4), > > + { /* sentinel */ }, > > +}; > > + > > +static const struct visconti_pll_rate_table piimgerpll_rates[] __initconst = { > > + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2), > > + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2), > > + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4), > > + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4), > > + { /* sentinel */ }, > > +}; > > + > > +static const struct visconti_pll_info pll_info[] __initconst = { > > + { TMPV770X_PLL_PIPLL0, "pipll0", "osc2-clk", 0, 0x0, pipll0_rates }, > > + { TMPV770X_PLL_PIDDRCPLL, "piddrcpll", "osc2-clk", 0, 0x500, piddrcpll_rates }, > > + { TMPV770X_PLL_PIVOIFPLL, "pivoifpll", "osc2-clk", 0, 0x600, pivoifpll_rates }, > > + { TMPV770X_PLL_PIIMGERPLL, "piimgerpll", "osc2-clk", 0, 0x700, piimgerpll_rates }, > > +}; > > + > > +static void __init tmpv770x_setup_plls(struct device_node *np) > > +{ > > + struct visconti_pll_provider *ctx; > > + void __iomem *reg_base; > > + > > + reg_base = of_iomap(np, 0); > > + if (!reg_base) > > + return; > > + > > + ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL); > > + if (IS_ERR(ctx)) { > > + iounmap(reg_base); > > + return; > > + } > > + > > + ctx->clk_data.clks[TMPV770X_PLL_PIPLL1] = > > + clk_register_fixed_rate(NULL, "pipll1", NULL, 0, 600000000); > > + ctx->clk_data.clks[TMPV770X_PLL_PIDNNPLL] = > > + clk_register_fixed_rate(NULL, "pidnnpll", NULL, 0, 500000000); > > + ctx->clk_data.clks[TMPV770X_PLL_PIETHERPLL] = > > + clk_register_fixed_rate(NULL, "pietherpll", NULL, 0, 500000000); > > + > > + visconti_register_plls(ctx, pll_info, ARRAY_SIZE(pll_info), &tmpv770x_pll_lock); > > +} > > + > > +CLK_OF_DECLARE_DRIVER(tmpv770x_plls, "toshiba,tmpv7708-pipllct", tmpv770x_setup_plls); > > DECLARE_DRIVER is for when more than one device needs to probe the node > in DT. Is that happening here? If so, please add a comment indicating > what the other driver is. I see. This driver does not need to use DECLARE_DRIVER. I had the wrong understanding. I will switch to the platform driver. > > > diff --git a/drivers/clk/visconti/pll.c b/drivers/clk/visconti/pll.c > > new file mode 100644 > > index 000000000000..7baa9512fad9 > > --- /dev/null > > +++ b/drivers/clk/visconti/pll.c > > @@ -0,0 +1,369 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Toshiba Visconti PLL driver > > + * > > + * Copyright (c) 2021 TOSHIBA CORPORATION > > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > > + * > > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > > + */ > > + > > +#include <linux/clk-provider.h> > > +#include <linux/delay.h> > > +#include <linux/slab.h> > > +#include <linux/io.h> > > + > > +#include "pll.h" > > + > > +struct visconti_pll { > > + struct clk_hw hw; > > + void __iomem *pll_base; > > + spinlock_t *lock; > > + int rate_count; > > size_t? And then place next to rate_table so we know they're related > please. OK, I will fix to use size_t, and move. > > > + unsigned long flags; > > + const struct visconti_pll_rate_table *rate_table; > > + struct visconti_pll_provider *ctx; > > +}; > > + > > +#define PLL_CONF_REG 0x0000 > > +#define PLL_CTRL_REG 0x0004 > > +#define PLL_FRACMODE_REG 0x0010 > > +#define PLL_INTIN_REG 0x0014 > > +#define PLL_FRACIN_REG 0x0018 > > +#define PLL_REFDIV_REG 0x001C > > +#define PLL_POSTDIV_REG 0x0020 > > + > > +#define PLL_CONFIG_SEL BIT(0) > > +#define PLL_PLLEN BIT(4) > > +#define PLL_BYPASS BIT(16) > > +#define PLL_INTIN_MASK GENMASK(11, 0) > > +#define PLL_FRACIN_MASK GENMASK(23, 0) > > +#define PLL_REFDIV_MASK GENMASK(5, 0) > > +#define PLL_POSTDIV_MASK GENMASK(2, 0) > > + > > +static inline struct visconti_pll *to_visconti_pll(struct clk_hw *hw) > > +{ > > + return container_of(hw, struct visconti_pll, hw); > > +} > > + > > +static void visconti_pll_get_params(struct visconti_pll *pll, > > + struct visconti_pll_rate_table *rate_table) > > +{ > > + u32 postdiv, val; > > + > > + val = readl(pll->pll_base + PLL_FRACMODE_REG); > > + rate_table->dacen = (val >> 4) & 0x1; > > What is 0x1? Some bitfield? Can it be a #define at least? Same for 4. > Better yet, use GENMASK and FIELD_PREP() and FIELD_GET() macros. I will fix to use macros. > > > + rate_table->dsmen = val & 0x1; > > + rate_table->fracin = readl(pll->pll_base + PLL_FRACIN_REG) & PLL_FRACIN_MASK; > > + rate_table->intin = readl(pll->pll_base + PLL_INTIN_REG) & PLL_INTIN_MASK; > > + rate_table->refdiv = readl(pll->pll_base + PLL_REFDIV_REG) & PLL_REFDIV_MASK; > > + > > + postdiv = readl(pll->pll_base + PLL_POSTDIV_REG); > > + rate_table->postdiv1 = postdiv & PLL_POSTDIV_MASK; > > + rate_table->postdiv2 = (postdiv >> 4) & PLL_POSTDIV_MASK; > > +} > > + > > +static const struct visconti_pll_rate_table *visconti_get_pll_settings(struct visconti_pll *pll, > > + unsigned long rate) > > +{ > > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > > + int i; > > + > > + for (i = 0; i < pll->rate_count; i++) { > > + if (rate == rate_table[i].rate) > > + return &rate_table[i]; > > + } > > Drop braces please. > I will drop. > > + > > + return NULL; > > +} > > + > > +static unsigned long visconti_get_pll_rate_from_data(struct visconti_pll *pll, > > + struct visconti_pll_rate_table *rate) > > const pointers? I will fix to use const pointer. > > > +{ > > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > > + int i; > > + > > + for (i = 0; i < pll->rate_count; i++) { > > + if (rate_table[i].dacen == rate->dacen && > > + rate_table[i].dsmen == rate->dsmen && > > + rate_table[i].fracin == rate->fracin && > > + rate_table[i].intin == rate->intin && > > + rate_table[i].refdiv == rate->refdiv && > > + rate_table[i].postdiv1 == rate->postdiv1 && > > + rate_table[i].postdiv2 == rate->postdiv2) > > Is it not the same table? Can we just compare the two pointers instead > of each member? OK, I will update to use memcmp or others. > > > + return rate_table[i].rate; > > + } > > + > > + /* set default */ > > + return rate_table[0].rate; > > +} > > + > > +static long visconti_pll_round_rate(struct clk_hw *hw, > > + unsigned long rate, unsigned long *prate) > > +{ > > + struct visconti_pll *pll = to_visconti_pll(hw); > > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > > + int i; > > + > > + /* Assumming rate_table is in descending order */ > > + for (i = 0; i < pll->rate_count; i++) { > > + if (rate >= rate_table[i].rate) > > + return rate_table[i].rate; > > + } > > Drop braces please. I will drop. > > > + > > + /* return minimum supported value */ > > + return rate_table[i - 1].rate; > > +} > > + > > +static unsigned long visconti_pll_recalc_rate(struct clk_hw *hw, > > + unsigned long parent_rate) > > +{ > > + struct visconti_pll *pll = to_visconti_pll(hw); > > + struct visconti_pll_rate_table rate_table; > > + > > + memset(&rate_table, 0, sizeof(rate_table)); > > + visconti_pll_get_params(pll, &rate_table); > > + > > + return visconti_get_pll_rate_from_data(pll, &rate_table); > > Oh. Can we do math instead? > > > +} > > + > > +static int visconti_pll_set_params(struct visconti_pll *pll, > > + const struct visconti_pll_rate_table *rate_table) > > +{ > > + /* update pll values */ > > This comment is worthless. Please remove. I will drop. > > > + writel(((rate_table->dacen << 4) | rate_table->dsmen), > > One too many parenthesis here. Please clean it up. > > > + pll->pll_base + PLL_FRACMODE_REG); > > + writel(((rate_table->postdiv2 << 4) | rate_table->postdiv1), > > Same. > OK, I will fix to use macros. > > + pll->pll_base + PLL_POSTDIV_REG); > > + writel(rate_table->intin, pll->pll_base + PLL_INTIN_REG); > > + writel(rate_table->fracin, pll->pll_base + PLL_FRACIN_REG); > > + writel(rate_table->refdiv, pll->pll_base + PLL_REFDIV_REG); > > + > > + return 0; > > +} > > + > > +static int visconti_pll_set_rate(struct clk_hw *hw, unsigned long rate, > > + unsigned long parent_rate) > > +{ > > + struct visconti_pll *pll = to_visconti_pll(hw); > > + const struct visconti_pll_rate_table *rate_table; > > + > > + /* Get required rate settings from table */ > > This comment is worthless, please remove. > I will drop. > > + rate_table = visconti_get_pll_settings(pll, rate); > > + if (!rate_table) { > > + pr_err("Invalid rate : %lu for pll clk %s\n", > > Please don't print anything during set_rate. It can be quite noisy if > something like a cpufreq driver keeps calling this with the incorrect > frequency. OK, I will drop this. > > > + parent_rate, __clk_get_name(hw->clk)); > > + return -EINVAL; > > + } > > + > > + return visconti_pll_set_params(pll, rate_table); > > +} > > + > > +static int visconti_pll_is_enabled(struct clk_hw *hw) > > +{ > > + struct visconti_pll *pll = to_visconti_pll(hw); > > + unsigned long flags; > > + u32 reg; > > + > > + spin_lock_irqsave(pll->lock, flags); > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + spin_unlock_irqrestore(pll->lock, flags); > > Don't think we need a spinlock to read a register. After this unlocks it > can be disabled anyway, so what's the point to locking here? > Indeed. I will drop lock and unlock. > > + > > + return (reg & PLL_PLLEN); > > +} > > + > > +static int visconti_pll_enable(struct clk_hw *hw) > > +{ > > + struct visconti_pll *pll = to_visconti_pll(hw); > > + const struct visconti_pll_rate_table *rate_table = pll->rate_table; > > + unsigned long flags; > > + u32 reg; > > + > > + if (visconti_pll_is_enabled(hw)) > > + return 0; > > Drop. I will drop. > > > + > > + spin_lock_irqsave(pll->lock, flags); > > + > > + /* Change to access via register */ > > + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG); > > + > > + /* Change to BYPASS mode */ > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + reg |= PLL_BYPASS; > > + writel(reg, pll->pll_base + PLL_CTRL_REG); > > + > > + /* Set DIV register .....*/ > > + visconti_pll_set_params(pll, &rate_table[0]); > > + > > + /* Disable PLL register */ > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + reg &= ~PLL_PLLEN; > > + writel(reg, pll->pll_base + PLL_CTRL_REG); > > + > > + /* Wait 1us */ > > + udelay(1); > > + > > + /* Enable PLL register */ > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + reg |= PLL_PLLEN; > > + writel(reg, pll->pll_base + PLL_CTRL_REG); > > + > > + /* Wait 40us */ > > + udelay(40); > > + > > + /* Change to PLL mode */ > > Every comment in here is saying what the code is doing. Please remove > them. OK, I will drop. > > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + reg &= ~PLL_BYPASS; > > + writel(reg, pll->pll_base + PLL_CTRL_REG); > > + > > + spin_unlock_irqrestore(pll->lock, flags); > > + > > + return 0; > > +} > > + > > +static void visconti_pll_disable(struct clk_hw *hw) > > +{ > > + struct visconti_pll *pll = to_visconti_pll(hw); > > + unsigned long flags; > > + u32 reg; > > + > > + if (!visconti_pll_is_enabled(hw)) > > + return; > > + > > + spin_lock_irqsave(pll->lock, flags); > > + > > + /* Change to access via register */ > > This comment is almost useful, except I don't know why we need to change > access, which is the important part. > The content of this comment was unclear. This operation unlocks the parameter setting via the register. I will update. > > + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG); > > + > > + /* Change to BYPASS mode */ > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + reg |= PLL_BYPASS; > > + writel(reg, pll->pll_base + PLL_CTRL_REG); > > + > > + /* PLL disable */ > > + reg = readl(pll->pll_base + PLL_CTRL_REG); > > + reg &= ~PLL_PLLEN; > > + writel(reg, pll->pll_base + PLL_CTRL_REG); > > + > > + spin_unlock_irqrestore(pll->lock, flags); > > +} > > + > > +static const struct clk_ops visconti_pll_ops = { > > + .enable = visconti_pll_enable, > > + .disable = visconti_pll_disable, > > + .is_enabled = visconti_pll_is_enabled, > > + .round_rate = visconti_pll_round_rate, > > + .recalc_rate = visconti_pll_recalc_rate, > > + .set_rate = visconti_pll_set_rate, > > +}; > > + > > +static struct clk *visconti_register_pll(struct visconti_pll_provider *ctx, > > + const char *name, > > + const char *parent_name, > > + int offset, > > + const struct visconti_pll_rate_table *rate_table, > > + u8 clk_pll_flags, > > Are the flags used? > Not use. I will drop. > > + spinlock_t *lock) > > +{ > > + struct clk_init_data init; > > + struct visconti_pll *pll; > > + struct clk *pll_clk; > > + int len; > > + > > + pll = kzalloc(sizeof(*pll), GFP_KERNEL); > > + if (!pll) > > + return ERR_PTR(-ENOMEM); > > + > > + /* Create the actual pll */ > > Worthless comment. > I will drop. > > + init.name = name; > > + init.flags = CLK_IGNORE_UNUSED; > > + init.parent_names = &parent_name; > > + init.num_parents = 1; > > + > > + for (len = 0; rate_table[len].rate != 0; ) > > + len++; > > + pll->rate_count = len; > > + pll->rate_table = kmemdup(rate_table, > > + pll->rate_count * sizeof(struct visconti_pll_rate_table), > > + GFP_KERNEL); > > Do we need to duplicate the table? Can't that be const? > I see. I will fix this. > > + WARN(!pll->rate_table, "%s: could not allocate rate table for %s\n", __func__, name); > > + > > + init.ops = &visconti_pll_ops; > > + pll->hw.init = &init; > > + pll->pll_base = ctx->reg_base + offset; > > + pll->flags = clk_pll_flags; > > + pll->lock = lock; > > + pll->ctx = ctx; > > + > > + pll_clk = clk_register(NULL, &pll->hw); > > Please use clk_hw_register(). OK, I will update to use clk_hw_register. > > > + if (IS_ERR(pll_clk)) { > > + pr_err("failed to register pll clock %s : %ld\n", name, PTR_ERR(pll_clk)); > > + kfree(pll); > > + } > > + > > + return pll_clk; > > +} > > + > > +static void visconti_pll_add_lookup(struct visconti_pll_provider *ctx, struct clk *clk, > > + unsigned int id) > > +{ > > + if (ctx->clk_data.clks && id) > > + ctx->clk_data.clks[id] = clk; > > +} > > + > > +void __init visconti_register_plls(struct visconti_pll_provider *ctx, > > + const struct visconti_pll_info *list, > > + unsigned int nr_plls, > > + spinlock_t *lock) > > +{ > > + int idx; > > + > > + for (idx = 0; idx < nr_plls; idx++, list++) { > > + struct clk *clk; > > + > > + clk = visconti_register_pll(ctx, > > + list->name, > > + list->parent, > > + list->base_reg, > > + list->rate_table, > > + list->flags, > > + lock); > > + if (IS_ERR(clk)) { > > + pr_err("failed to register clock %s\n", list->name); > > + continue; > > + } > > + > > + visconti_pll_add_lookup(ctx, clk, list->id); > > + } > > +} > > + > > +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, > > + void __iomem *base, > > + unsigned long nr_plls) > > +{ > > + struct visconti_pll_provider *ctx; > > + struct clk **clk_table; > > + int i; > > + > > + ctx = kzalloc(sizeof(struct visconti_pll_provider), GFP_KERNEL); > > + if (!ctx) > > + return ERR_PTR(-ENOMEM); > > + > > + clk_table = kcalloc(nr_plls, sizeof(struct clk *), GFP_KERNEL); > > + if (!clk_table) > > + goto err; > > + > > + for (i = 0; i < nr_plls; ++i) > > + clk_table[i] = ERR_PTR(-ENOENT); > > + > > + ctx->node = np; > > + ctx->reg_base = base; > > + ctx->clk_data.clks = clk_table; > > + ctx->clk_data.clk_num = nr_plls; > > + > > + return ctx; > > + > > +err: > > + kfree(ctx); > > + return ERR_PTR(-ENOMEM); > > +} > > diff --git a/drivers/clk/visconti/pll.h b/drivers/clk/visconti/pll.h > > new file mode 100644 > > index 000000000000..ce0ce1d8cd88 > > --- /dev/null > > +++ b/drivers/clk/visconti/pll.h > > @@ -0,0 +1,63 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * Copyright (c) 2021 TOSHIBA CORPORATION > > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation > > + * > > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > > + */ > > + > > +#ifndef _VISCONTI_PLL_H_ > > +#define _VISCONTI_PLL_H_ > > + > > +#include <linux/clk-provider.h> > > +#include <linux/regmap.h> > > +#include <linux/spinlock.h> > > + > > +struct visconti_pll_provider { > > + void __iomem *reg_base; > > + struct regmap *regmap; > > + struct clk_onecell_data clk_data; > > + struct device_node *node; > > +}; > > + > > +#define VISCONTI_PLL_RATE(_rate, _dacen, _dsmen, \ > > + _refdiv, _intin, _fracin, _postdiv1, _postdiv2) \ > > +{ \ > > + .rate = _rate, \ > > + .dacen = _dacen, \ > > + .dsmen = _dsmen, \ > > + .refdiv = _refdiv, \ > > + .intin = _intin, \ > > + .fracin = _fracin, \ > > + .postdiv1 = _postdiv1, \ > > + .postdiv2 = _postdiv2 \ > > +} > > + > > +struct visconti_pll_rate_table { > > + unsigned long rate; > > + unsigned int dacen; > > + unsigned int dsmen; > > + unsigned int refdiv; > > + unsigned long intin; > > + unsigned long fracin; > > + unsigned int postdiv1; > > + unsigned int postdiv2; > > +}; > > + > > +struct visconti_pll_info { > > + unsigned int id; > > + const char *name; > > + const char *parent; > > + u8 flags; > > + unsigned long base_reg; > > + const struct visconti_pll_rate_table *rate_table; > > +}; > > + > > +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, > > + void __iomem *base, > > + unsigned long nr_plls); > > +void __init visconti_register_plls(struct visconti_pll_provider *ctx, > > __init can be dropped from header files. It serves no purpose. > OK, I will drop. > > + const struct visconti_pll_info *list, > > + unsigned int nr_plls, spinlock_t *lock); > > + > > +#endif /* _VISCONTI_PLL_H_ */ > Best regards, Nobuhiro
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5f06879d7fe9..dbf70fdecfc8 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -116,6 +116,7 @@ obj-y += ti/ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-y += versatile/ +obj-$(CONFIG_ARCH_VISCONTI) += visconti/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_X86) += x86/ endif diff --git a/drivers/clk/visconti/Makefile b/drivers/clk/visconti/Makefile new file mode 100644 index 000000000000..c1254fd52b31 --- /dev/null +++ b/drivers/clk/visconti/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Makefile for Toshiba Visconti clock + +obj-y += clkc.o pll.o reset.o +obj-y += pll-tmpv770x.o clkc-tmpv770x.o diff --git a/drivers/clk/visconti/clkc-tmpv770x.c b/drivers/clk/visconti/clkc-tmpv770x.c new file mode 100644 index 000000000000..6ee5c5179f7c --- /dev/null +++ b/drivers/clk/visconti/clkc-tmpv770x.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba Visconti clock controller + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +#include <dt-bindings/clock/toshiba,tmpv770x.h> +#include <dt-bindings/reset/toshiba,tmpv770x.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include "clkc.h" +#include "reset.h" + +static DEFINE_SPINLOCK(tmpv770x_clk_lock); +static DEFINE_SPINLOCK(tmpv770x_rst_lock); + +static const struct visconti_fixed_clk fixed_clk_tables[] = { + /* PLL1 */ + /* PICMPT0/1, PITSC, PIUWDT, PISWDT, PISBUS, PIPMU, PIGPMU, PITMU */ + /* PIEMM, PIMISC, PIGCOMM, PIDCOMM, PIMBUS, PIGPIO, PIPGM */ + { TMPV770X_CLK_PIPLL1_DIV4, "pipll1_div4", "pipll1", 0, 1, 4, }, + /* PISBUS */ + { TMPV770X_CLK_PIPLL1_DIV2, "pipll1_div2", "pipll1", 0, 1, 2, }, + /* PICOBUS_CLK */ + { TMPV770X_CLK_PIPLL1_DIV1, "pipll1_div1", "pipll1", 0, 1, 1, }, + /* PIDNNPLL */ + /* CONN_CLK, PIMBUS, PICRC0/1 */ + { TMPV770X_CLK_PIDNNPLL_DIV1, "pidnnpll_div1", "pidnnpll", 0, 1, 1, }, + { TMPV770X_CLK_PIREFCLK, "pirefclk", "osc2-clk", 0, 1, 1, }, + { TMPV770X_CLK_WDTCLK, "wdtclk", "osc2-clk", 0, 1, 1, }, +}; + +static const struct visconti_clk_gate_table pietherpll_clk_gate_tables[] = { + /* pietherpll */ + { TMPV770X_CLK_PIETHER_2P5M, "piether_2p5m", "pietherpll", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 4, 200, + TMPV770X_RESET_PIETHER_2P5M, }, + { TMPV770X_CLK_PIETHER_25M, "piether_25m", "pietherpll", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 5, 20, + TMPV770X_RESET_PIETHER_25M, }, + { TMPV770X_CLK_PIETHER_50M, "piether_50m", "pietherpll", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 6, 10, + TMPV770X_RESET_PIETHER_50M, }, + { TMPV770X_CLK_PIETHER_125M, "piether_125m", "pietherpll", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 7, 4, + TMPV770X_RESET_PIETHER_125M, }, +}; + +static const struct visconti_clk_gate_table clk_gate_tables[] = { + { TMPV770X_CLK_HOX, "hox", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x4C, 0x14C, 0, 1, + TMPV770X_RESET_HOX, }, + { TMPV770X_CLK_PCIE_MSTR, "pcie_mstr", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 0, 1, + TMPV770X_RESET_PCIE_MSTR, }, + { TMPV770X_CLK_PCIE_AUX, "pcie_aux", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 1, 24, + TMPV770X_RESET_PCIE_AUX, }, + { TMPV770X_CLK_PIINTC, "piintc", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x8, 0x108, 0, 2, + TMPV770X_RESET_PIINTC,}, + { TMPV770X_CLK_PIETHER_BUS, "piether_bus", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 0, 2, + TMPV770X_RESET_PIETHER_BUS, }, /* BUS_CLK */ + { TMPV770X_CLK_PISPI0, "pispi0", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 0, 2, + TMPV770X_RESET_PISPI0, }, + { TMPV770X_CLK_PISPI1, "pispi1", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 1, 2, + TMPV770X_RESET_PISPI1, }, + { TMPV770X_CLK_PISPI2, "pispi2", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 2, 2, + TMPV770X_RESET_PISPI2, }, + { TMPV770X_CLK_PISPI3, "pispi3", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 3, 2, + TMPV770X_RESET_PISPI3,}, + { TMPV770X_CLK_PISPI4, "pispi4", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 4, 2, + TMPV770X_RESET_PISPI4, }, + { TMPV770X_CLK_PISPI5, "pispi5", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 5, 2, + TMPV770X_RESET_PISPI5}, + { TMPV770X_CLK_PISPI6, "pispi6", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 6, 2, + TMPV770X_RESET_PISPI6,}, + { TMPV770X_CLK_PIUART0, "piuart0", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 0, 4, + TMPV770X_RESET_PIUART0,}, + { TMPV770X_CLK_PIUART1, "piuart1", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 1, 4, + TMPV770X_RESET_PIUART1, }, + { TMPV770X_CLK_PIUART2, "piuart2", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 2, 4, + TMPV770X_RESET_PIUART2, }, + { TMPV770X_CLK_PIUART3, "piuart3", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 3, 4, + TMPV770X_RESET_PIUART3, }, + { TMPV770X_CLK_PII2C0, "pii2c0", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 0, 4, + TMPV770X_RESET_PII2C0, }, + { TMPV770X_CLK_PII2C1, "pii2c1", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 1, 4, + TMPV770X_RESET_PII2C1, }, + { TMPV770X_CLK_PII2C2, "pii2c2", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 2, 4, + TMPV770X_RESET_PII2C2, }, + { TMPV770X_CLK_PII2C3, "pii2c3", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 3, 4, + TMPV770X_RESET_PII2C3,}, + { TMPV770X_CLK_PII2C4, "pii2c4", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 4, 4, + TMPV770X_RESET_PII2C4, }, + { TMPV770X_CLK_PII2C5, "pii2c5", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 5, 4, + TMPV770X_RESET_PII2C5, }, + { TMPV770X_CLK_PII2C6, "pii2c6", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 6, 4, + TMPV770X_RESET_PII2C6, }, + { TMPV770X_CLK_PII2C7, "pii2c7", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 7, 4, + TMPV770X_RESET_PII2C7, }, + { TMPV770X_CLK_PII2C8, "pii2c8", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 8, 4, + TMPV770X_RESET_PII2C8, }, + /* PIPCMIF */ + { TMPV770X_CLK_PIPCMIF, "pipcmif", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x64, 0x164, 0, 4, + TMPV770X_RESET_PIPCMIF, }, + /* PISYSTEM */ + { TMPV770X_CLK_WRCK, "wrck", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x68, 0x168, 9, 32, + -1, }, /* No reset */ + { TMPV770X_CLK_PICKMON, "pickmon", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x10, 0x110, 8, 4, + TMPV770X_RESET_PICKMON, }, + { TMPV770X_CLK_SBUSCLK, "sbusclk", "pipll1", + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x14, 0x114, 0, 4, + TMPV770X_RESET_SBUSCLK, }, +}; + +static const struct visconti_reset_data clk_reset_data[] = { + [TMPV770X_RESET_PIETHER_2P5M] = { 0x434, 0x534, 4, }, + [TMPV770X_RESET_PIETHER_25M] = { 0x434, 0x534, 5, }, + [TMPV770X_RESET_PIETHER_50M] = { 0x434, 0x534, 6, }, + [TMPV770X_RESET_PIETHER_125M] = { 0x434, 0x534, 7, }, + [TMPV770X_RESET_HOX] = { 0x44C, 0x54C, 0, }, + [TMPV770X_RESET_PCIE_MSTR] = { 0x438, 0x538, 0, }, + [TMPV770X_RESET_PCIE_AUX] = { 0x438, 0x538, 1, }, + [TMPV770X_RESET_PIINTC] = { 0x408, 0x508, 0, }, + [TMPV770X_RESET_PIETHER_BUS] = { 0x434, 0x534, 0, }, + [TMPV770X_RESET_PISPI0] = { 0x428, 0x528, 0, }, + [TMPV770X_RESET_PISPI1] = { 0x428, 0x528, 1, }, + [TMPV770X_RESET_PISPI2] = { 0x428, 0x528, 2, }, + [TMPV770X_RESET_PISPI3] = { 0x428, 0x528, 3, }, + [TMPV770X_RESET_PISPI4] = { 0x428, 0x528, 4, }, + [TMPV770X_RESET_PISPI5] = { 0x428, 0x528, 5, }, + [TMPV770X_RESET_PISPI6] = { 0x428, 0x528, 6, }, + [TMPV770X_RESET_PIUART0] = { 0x42C, 0x52C, 0, }, + [TMPV770X_RESET_PIUART1] = { 0x42C, 0x52C, 1, }, + [TMPV770X_RESET_PIUART2] = { 0x42C, 0x52C, 2, }, + [TMPV770X_RESET_PIUART3] = { 0x42C, 0x52C, 3, }, + [TMPV770X_RESET_PII2C0] = { 0x430, 0x530, 0, }, + [TMPV770X_RESET_PII2C1] = { 0x430, 0x530, 1, }, + [TMPV770X_RESET_PII2C2] = { 0x430, 0x530, 2, }, + [TMPV770X_RESET_PII2C3] = { 0x430, 0x530, 3, }, + [TMPV770X_RESET_PII2C4] = { 0x430, 0x530, 4, }, + [TMPV770X_RESET_PII2C5] = { 0x430, 0x530, 5, }, + [TMPV770X_RESET_PII2C6] = { 0x430, 0x530, 6, }, + [TMPV770X_RESET_PII2C7] = { 0x430, 0x530, 7, }, + [TMPV770X_RESET_PII2C8] = { 0x430, 0x530, 8, }, + [TMPV770X_RESET_PIPCMIF] = { 0x464, 0x564, 0, }, + [TMPV770X_RESET_PICKMON] = { 0x410, 0x510, 8, }, + [TMPV770X_RESET_SBUSCLK] = { 0x414, 0x514, 0, }, +}; + +static void __init tmpv770x_clkc_setup_clks(struct device_node *np) +{ + struct visconti_clk_provider *ctx; + struct regmap *regmap; + int ret, i; + + regmap = device_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + ctx = visconti_init_clk(np, regmap, TMPV770X_NR_CLK); + if (IS_ERR(ctx)) + return; + + ret = visconti_register_reset_controller(np, regmap, clk_reset_data, + TMPV770X_NR_RESET, + &visconti_reset_ops, + &tmpv770x_rst_lock); + if (ret) { + pr_err("Failed to register reset controller: %d\n", ret); + return; + } + + for (i = 0; i < (ARRAY_SIZE(fixed_clk_tables)); i++) + ctx->clk_data.clks[fixed_clk_tables[i].id] = + clk_register_fixed_factor(NULL, + fixed_clk_tables[i].name, + fixed_clk_tables[i].parent, + fixed_clk_tables[i].flag, + fixed_clk_tables[i].mult, + fixed_clk_tables[i].div); + + ret = visconti_clk_register_gates(ctx, clk_gate_tables, + ARRAY_SIZE(clk_gate_tables), clk_reset_data, + &tmpv770x_clk_lock); + if (ret) { + pr_err("Failed to register main clock gate: %d\n", ret); + return; + } + + ret = visconti_clk_register_gates(ctx, pietherpll_clk_gate_tables, + ARRAY_SIZE(pietherpll_clk_gate_tables), + clk_reset_data, &tmpv770x_clk_lock); + if (ret) { + pr_err("Failed to register pietherpll clock gate: %d\n", ret); + return; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &ctx->clk_data); +} + +CLK_OF_DECLARE_DRIVER(tmpv770x_clkc, "toshiba,tmpv7708-pismu", tmpv770x_clkc_setup_clks); diff --git a/drivers/clk/visconti/clkc.c b/drivers/clk/visconti/clkc.c new file mode 100644 index 000000000000..32b6f6266154 --- /dev/null +++ b/drivers/clk/visconti/clkc.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba Visconti clock controller + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/string.h> + +#include "clkc.h" + +static inline struct visconti_clk_gate *to_visconti_clk_gate(struct clk_hw *hw) +{ + return container_of(hw, struct visconti_clk_gate, hw); +} + +static int visconti_gate_clk_is_enabled(struct clk_hw *hw) +{ + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); + u32 clk = BIT(gate->ck_idx); + u32 val; + + regmap_read(gate->regmap, gate->ckon_offset, &val); + return (val & clk) ? 1 : 0; +} + +static void visconti_gate_clk_disable(struct clk_hw *hw) +{ + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); + u32 clk = BIT(gate->ck_idx); + u32 rst = BIT(gate->rs_idx); + unsigned long flags; + + spin_lock_irqsave(gate->lock, flags); + + if (visconti_gate_clk_is_enabled(hw)) { + spin_unlock_irqrestore(gate->lock, flags); + return; + } + + /* Reset release */ + regmap_update_bits(gate->regmap, gate->rson_offset, rst, 1); + + udelay(100); + + /* Disable clock */ + regmap_update_bits(gate->regmap, gate->ckoff_offset, clk, 1); + spin_unlock_irqrestore(gate->lock, flags); +} + +static int visconti_gate_clk_enable(struct clk_hw *hw) +{ + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw); + u32 clk = BIT(gate->ck_idx); + u32 rst = BIT(gate->rs_idx); + unsigned long flags; + u32 val; + + spin_lock_irqsave(gate->lock, flags); + + if (visconti_gate_clk_is_enabled(hw)) { + spin_unlock_irqrestore(gate->lock, flags); + return 0; + } + + regmap_update_bits(gate->regmap, gate->ckon_offset, clk, 1); + /* Need read back */ + regmap_read(gate->regmap, gate->ckon_offset, &val); + + udelay(100); + /* Reset release */ + regmap_update_bits(gate->regmap, gate->rsoff_offset, rst, 1); + /* Need read back */ + regmap_read(gate->regmap, gate->ckoff_offset, &val); + spin_unlock_irqrestore(gate->lock, flags); + + return 0; +} + +static const struct clk_ops visconti_clk_gate_ops = { + .enable = visconti_gate_clk_enable, + .disable = visconti_gate_clk_disable, + .is_enabled = visconti_gate_clk_is_enabled, +}; + +static struct clk_hw *visconti_clk_register_gate(struct device *dev, + const char *name, + const char *parent_name, + struct regmap *regmap, + const struct visconti_clk_gate_table *clks, + u32 rson_offset, + u32 rsoff_offset, + u8 rs_idx, + spinlock_t *lock) +{ + struct visconti_clk_gate *gate; + struct clk_init_data init; + struct clk_hw *hw; + int ret; + + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &visconti_clk_gate_ops; + init.flags = clks->flags; + init.parent_names = parent_name ? &parent_name : NULL; + init.num_parents = parent_name ? 1 : 0; + + gate->regmap = regmap; + gate->ckon_offset = clks->ckon_offset; + gate->ckoff_offset = clks->ckoff_offset; + gate->ck_idx = clks->ck_idx; + gate->rson_offset = rson_offset; + gate->rsoff_offset = rsoff_offset; + gate->rs_idx = rs_idx; + gate->lock = lock; + gate->hw.init = &init; + + hw = &gate->hw; + ret = clk_hw_register(dev, hw); + if (ret) { + kfree(gate); + hw = ERR_PTR(ret); + } + + return hw; +} + +int visconti_clk_register_gates(struct visconti_clk_provider *data, + const struct visconti_clk_gate_table *clks, + int num_gate, const struct visconti_reset_data *reset, + spinlock_t *lock) +{ + u32 rson_offset, rsoff_offset; + struct clk_hw *hw_clk; + u8 rs_idx; + int i; + + for (i = 0; i < num_gate; i++) { + struct clk *clk; + char *div_name; + + div_name = kasprintf(GFP_KERNEL, "%s_div", clks[i].name); + if (!div_name) + return -ENOMEM; + + if (clks[i].rs_id >= 0) { + rson_offset = reset[clks[i].rs_id].rson_offset; + rsoff_offset = reset[clks[i].rs_id].rsoff_offset; + rs_idx = reset[clks[i].rs_id].rs_idx; + } else { + rson_offset = rsoff_offset = rs_idx = -1; + } + + clk = clk_register_fixed_factor(NULL, div_name, clks[i].parent, + 0, 1, clks[i].div); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + hw_clk = visconti_clk_register_gate(NULL, + clks[i].name, + div_name, + data->regmap, + &clks[i], + rson_offset, + rsoff_offset, + rs_idx, + lock); + kfree(div_name); + if (IS_ERR(hw_clk)) { + pr_err("%s: failed to register clock %s\n", + __func__, clks[i].name); + return PTR_ERR(hw_clk); + } + + data->clk_data.clks[clks[i].id] = hw_clk->clk; + } + + return 0; +} + +struct visconti_clk_provider *visconti_init_clk(struct device_node *np, + struct regmap *regmap, + unsigned long nr_clks) +{ + struct visconti_clk_provider *ctx; + struct clk **clk_table; + int i; + + ctx = kzalloc(sizeof(struct visconti_clk_provider), GFP_KERNEL); + if (!ctx) + return ERR_PTR(-ENOMEM); + + clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL); + if (!clk_table) + goto err; + + for (i = 0; i < nr_clks; ++i) + clk_table[i] = ERR_PTR(-ENOENT); + ctx->node = np; + ctx->regmap = regmap; + ctx->clk_data.clks = clk_table; + ctx->clk_data.clk_num = nr_clks; + + return ctx; +err: + kfree(ctx); + return ERR_PTR(-ENOMEM); +} diff --git a/drivers/clk/visconti/clkc.h b/drivers/clk/visconti/clkc.h new file mode 100644 index 000000000000..4df8788d635a --- /dev/null +++ b/drivers/clk/visconti/clkc.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Toshiba Visconti clock controller + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +#ifndef _VISCONTI_CLKC_H_ +#define _VISCONTI_CLKC_H_ + +#include <linux/mfd/syscon.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/spinlock.h> + +#include "reset.h" + +struct visconti_clk_provider { + struct device_node *node; + struct regmap *regmap; + struct clk_onecell_data clk_data; +}; + +struct visconti_clk_gate_table { + unsigned int id; + const char *name; + const char *parent; + u8 flags; + u32 ckon_offset; + u32 ckoff_offset; + u8 ck_idx; + unsigned int div; + u8 rs_id; +}; + +struct visconti_fixed_clk { + unsigned int id; + const char *name; + const char *parent; + unsigned long flag; + unsigned int mult; + unsigned int div; +}; + +struct visconti_clk_gate { + struct clk_hw hw; + struct regmap *regmap; + u32 ckon_offset; + u32 ckoff_offset; + u8 ck_idx; + u8 flags; + u32 rson_offset; + u32 rsoff_offset; + u8 rs_idx; + spinlock_t *lock; +}; + +struct visconti_clk_provider *visconti_init_clk(struct device_node *np, + struct regmap *regmap, + unsigned long nr_clks); +int visconti_clk_register_gates(struct visconti_clk_provider *data, + const struct visconti_clk_gate_table *clks, + int num_gate, + const struct visconti_reset_data *reset, + spinlock_t *lock); +#endif /* _VISCONTI_CLKC_H_ */ diff --git a/drivers/clk/visconti/pll-tmpv770x.c b/drivers/clk/visconti/pll-tmpv770x.c new file mode 100644 index 000000000000..a0874cb6a67b --- /dev/null +++ b/drivers/clk/visconti/pll-tmpv770x.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba Visconti PLL controller + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +#include <dt-bindings/clock/toshiba,tmpv770x.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include "pll.h" + +static DEFINE_SPINLOCK(tmpv770x_pll_lock); + +static const struct visconti_pll_rate_table pipll0_rates[] __initconst = { + VISCONTI_PLL_RATE(840000000, 0x1, 0x0, 0x1, 0x54, 0x000000, 0x2, 0x1), + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1), + VISCONTI_PLL_RATE(600000000, 0x1, 0x0, 0x1, 0x3C, 0x000000, 0x2, 0x1), + { /* sentinel */ }, +}; + +static const struct visconti_pll_rate_table piddrcpll_rates[] __initconst = { + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1), + VISCONTI_PLL_RATE(760000000, 0x1, 0x0, 0x1, 0x4C, 0x000000, 0x2, 0x1), + { /* sentinel */ }, +}; + +static const struct visconti_pll_rate_table pivoifpll_rates[] __initconst = { + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2), + VISCONTI_PLL_RATE(148500000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x2), + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2), + VISCONTI_PLL_RATE(74250000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x4), + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4), + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4), + VISCONTI_PLL_RATE(35750000, 0x1, 0x1, 0x1, 0x32, 0x0CCCCC, 0x7, 0x4), + { /* sentinel */ }, +}; + +static const struct visconti_pll_rate_table piimgerpll_rates[] __initconst = { + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2), + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2), + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4), + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4), + { /* sentinel */ }, +}; + +static const struct visconti_pll_info pll_info[] __initconst = { + { TMPV770X_PLL_PIPLL0, "pipll0", "osc2-clk", 0, 0x0, pipll0_rates }, + { TMPV770X_PLL_PIDDRCPLL, "piddrcpll", "osc2-clk", 0, 0x500, piddrcpll_rates }, + { TMPV770X_PLL_PIVOIFPLL, "pivoifpll", "osc2-clk", 0, 0x600, pivoifpll_rates }, + { TMPV770X_PLL_PIIMGERPLL, "piimgerpll", "osc2-clk", 0, 0x700, piimgerpll_rates }, +}; + +static void __init tmpv770x_setup_plls(struct device_node *np) +{ + struct visconti_pll_provider *ctx; + void __iomem *reg_base; + + reg_base = of_iomap(np, 0); + if (!reg_base) + return; + + ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL); + if (IS_ERR(ctx)) { + iounmap(reg_base); + return; + } + + ctx->clk_data.clks[TMPV770X_PLL_PIPLL1] = + clk_register_fixed_rate(NULL, "pipll1", NULL, 0, 600000000); + ctx->clk_data.clks[TMPV770X_PLL_PIDNNPLL] = + clk_register_fixed_rate(NULL, "pidnnpll", NULL, 0, 500000000); + ctx->clk_data.clks[TMPV770X_PLL_PIETHERPLL] = + clk_register_fixed_rate(NULL, "pietherpll", NULL, 0, 500000000); + + visconti_register_plls(ctx, pll_info, ARRAY_SIZE(pll_info), &tmpv770x_pll_lock); +} + +CLK_OF_DECLARE_DRIVER(tmpv770x_plls, "toshiba,tmpv7708-pipllct", tmpv770x_setup_plls); diff --git a/drivers/clk/visconti/pll.c b/drivers/clk/visconti/pll.c new file mode 100644 index 000000000000..7baa9512fad9 --- /dev/null +++ b/drivers/clk/visconti/pll.c @@ -0,0 +1,369 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba Visconti PLL driver + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/io.h> + +#include "pll.h" + +struct visconti_pll { + struct clk_hw hw; + void __iomem *pll_base; + spinlock_t *lock; + int rate_count; + unsigned long flags; + const struct visconti_pll_rate_table *rate_table; + struct visconti_pll_provider *ctx; +}; + +#define PLL_CONF_REG 0x0000 +#define PLL_CTRL_REG 0x0004 +#define PLL_FRACMODE_REG 0x0010 +#define PLL_INTIN_REG 0x0014 +#define PLL_FRACIN_REG 0x0018 +#define PLL_REFDIV_REG 0x001C +#define PLL_POSTDIV_REG 0x0020 + +#define PLL_CONFIG_SEL BIT(0) +#define PLL_PLLEN BIT(4) +#define PLL_BYPASS BIT(16) +#define PLL_INTIN_MASK GENMASK(11, 0) +#define PLL_FRACIN_MASK GENMASK(23, 0) +#define PLL_REFDIV_MASK GENMASK(5, 0) +#define PLL_POSTDIV_MASK GENMASK(2, 0) + +static inline struct visconti_pll *to_visconti_pll(struct clk_hw *hw) +{ + return container_of(hw, struct visconti_pll, hw); +} + +static void visconti_pll_get_params(struct visconti_pll *pll, + struct visconti_pll_rate_table *rate_table) +{ + u32 postdiv, val; + + val = readl(pll->pll_base + PLL_FRACMODE_REG); + rate_table->dacen = (val >> 4) & 0x1; + rate_table->dsmen = val & 0x1; + rate_table->fracin = readl(pll->pll_base + PLL_FRACIN_REG) & PLL_FRACIN_MASK; + rate_table->intin = readl(pll->pll_base + PLL_INTIN_REG) & PLL_INTIN_MASK; + rate_table->refdiv = readl(pll->pll_base + PLL_REFDIV_REG) & PLL_REFDIV_MASK; + + postdiv = readl(pll->pll_base + PLL_POSTDIV_REG); + rate_table->postdiv1 = postdiv & PLL_POSTDIV_MASK; + rate_table->postdiv2 = (postdiv >> 4) & PLL_POSTDIV_MASK; +} + +static const struct visconti_pll_rate_table *visconti_get_pll_settings(struct visconti_pll *pll, + unsigned long rate) +{ + const struct visconti_pll_rate_table *rate_table = pll->rate_table; + int i; + + for (i = 0; i < pll->rate_count; i++) { + if (rate == rate_table[i].rate) + return &rate_table[i]; + } + + return NULL; +} + +static unsigned long visconti_get_pll_rate_from_data(struct visconti_pll *pll, + struct visconti_pll_rate_table *rate) +{ + const struct visconti_pll_rate_table *rate_table = pll->rate_table; + int i; + + for (i = 0; i < pll->rate_count; i++) { + if (rate_table[i].dacen == rate->dacen && + rate_table[i].dsmen == rate->dsmen && + rate_table[i].fracin == rate->fracin && + rate_table[i].intin == rate->intin && + rate_table[i].refdiv == rate->refdiv && + rate_table[i].postdiv1 == rate->postdiv1 && + rate_table[i].postdiv2 == rate->postdiv2) + return rate_table[i].rate; + } + + /* set default */ + return rate_table[0].rate; +} + +static long visconti_pll_round_rate(struct clk_hw *hw, + unsigned long rate, unsigned long *prate) +{ + struct visconti_pll *pll = to_visconti_pll(hw); + const struct visconti_pll_rate_table *rate_table = pll->rate_table; + int i; + + /* Assumming rate_table is in descending order */ + for (i = 0; i < pll->rate_count; i++) { + if (rate >= rate_table[i].rate) + return rate_table[i].rate; + } + + /* return minimum supported value */ + return rate_table[i - 1].rate; +} + +static unsigned long visconti_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct visconti_pll *pll = to_visconti_pll(hw); + struct visconti_pll_rate_table rate_table; + + memset(&rate_table, 0, sizeof(rate_table)); + visconti_pll_get_params(pll, &rate_table); + + return visconti_get_pll_rate_from_data(pll, &rate_table); +} + +static int visconti_pll_set_params(struct visconti_pll *pll, + const struct visconti_pll_rate_table *rate_table) +{ + /* update pll values */ + writel(((rate_table->dacen << 4) | rate_table->dsmen), + pll->pll_base + PLL_FRACMODE_REG); + writel(((rate_table->postdiv2 << 4) | rate_table->postdiv1), + pll->pll_base + PLL_POSTDIV_REG); + writel(rate_table->intin, pll->pll_base + PLL_INTIN_REG); + writel(rate_table->fracin, pll->pll_base + PLL_FRACIN_REG); + writel(rate_table->refdiv, pll->pll_base + PLL_REFDIV_REG); + + return 0; +} + +static int visconti_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct visconti_pll *pll = to_visconti_pll(hw); + const struct visconti_pll_rate_table *rate_table; + + /* Get required rate settings from table */ + rate_table = visconti_get_pll_settings(pll, rate); + if (!rate_table) { + pr_err("Invalid rate : %lu for pll clk %s\n", + parent_rate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + return visconti_pll_set_params(pll, rate_table); +} + +static int visconti_pll_is_enabled(struct clk_hw *hw) +{ + struct visconti_pll *pll = to_visconti_pll(hw); + unsigned long flags; + u32 reg; + + spin_lock_irqsave(pll->lock, flags); + reg = readl(pll->pll_base + PLL_CTRL_REG); + spin_unlock_irqrestore(pll->lock, flags); + + return (reg & PLL_PLLEN); +} + +static int visconti_pll_enable(struct clk_hw *hw) +{ + struct visconti_pll *pll = to_visconti_pll(hw); + const struct visconti_pll_rate_table *rate_table = pll->rate_table; + unsigned long flags; + u32 reg; + + if (visconti_pll_is_enabled(hw)) + return 0; + + spin_lock_irqsave(pll->lock, flags); + + /* Change to access via register */ + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG); + + /* Change to BYPASS mode */ + reg = readl(pll->pll_base + PLL_CTRL_REG); + reg |= PLL_BYPASS; + writel(reg, pll->pll_base + PLL_CTRL_REG); + + /* Set DIV register .....*/ + visconti_pll_set_params(pll, &rate_table[0]); + + /* Disable PLL register */ + reg = readl(pll->pll_base + PLL_CTRL_REG); + reg &= ~PLL_PLLEN; + writel(reg, pll->pll_base + PLL_CTRL_REG); + + /* Wait 1us */ + udelay(1); + + /* Enable PLL register */ + reg = readl(pll->pll_base + PLL_CTRL_REG); + reg |= PLL_PLLEN; + writel(reg, pll->pll_base + PLL_CTRL_REG); + + /* Wait 40us */ + udelay(40); + + /* Change to PLL mode */ + reg = readl(pll->pll_base + PLL_CTRL_REG); + reg &= ~PLL_BYPASS; + writel(reg, pll->pll_base + PLL_CTRL_REG); + + spin_unlock_irqrestore(pll->lock, flags); + + return 0; +} + +static void visconti_pll_disable(struct clk_hw *hw) +{ + struct visconti_pll *pll = to_visconti_pll(hw); + unsigned long flags; + u32 reg; + + if (!visconti_pll_is_enabled(hw)) + return; + + spin_lock_irqsave(pll->lock, flags); + + /* Change to access via register */ + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG); + + /* Change to BYPASS mode */ + reg = readl(pll->pll_base + PLL_CTRL_REG); + reg |= PLL_BYPASS; + writel(reg, pll->pll_base + PLL_CTRL_REG); + + /* PLL disable */ + reg = readl(pll->pll_base + PLL_CTRL_REG); + reg &= ~PLL_PLLEN; + writel(reg, pll->pll_base + PLL_CTRL_REG); + + spin_unlock_irqrestore(pll->lock, flags); +} + +static const struct clk_ops visconti_pll_ops = { + .enable = visconti_pll_enable, + .disable = visconti_pll_disable, + .is_enabled = visconti_pll_is_enabled, + .round_rate = visconti_pll_round_rate, + .recalc_rate = visconti_pll_recalc_rate, + .set_rate = visconti_pll_set_rate, +}; + +static struct clk *visconti_register_pll(struct visconti_pll_provider *ctx, + const char *name, + const char *parent_name, + int offset, + const struct visconti_pll_rate_table *rate_table, + u8 clk_pll_flags, + spinlock_t *lock) +{ + struct clk_init_data init; + struct visconti_pll *pll; + struct clk *pll_clk; + int len; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + /* Create the actual pll */ + init.name = name; + init.flags = CLK_IGNORE_UNUSED; + init.parent_names = &parent_name; + init.num_parents = 1; + + for (len = 0; rate_table[len].rate != 0; ) + len++; + pll->rate_count = len; + pll->rate_table = kmemdup(rate_table, + pll->rate_count * sizeof(struct visconti_pll_rate_table), + GFP_KERNEL); + WARN(!pll->rate_table, "%s: could not allocate rate table for %s\n", __func__, name); + + init.ops = &visconti_pll_ops; + pll->hw.init = &init; + pll->pll_base = ctx->reg_base + offset; + pll->flags = clk_pll_flags; + pll->lock = lock; + pll->ctx = ctx; + + pll_clk = clk_register(NULL, &pll->hw); + if (IS_ERR(pll_clk)) { + pr_err("failed to register pll clock %s : %ld\n", name, PTR_ERR(pll_clk)); + kfree(pll); + } + + return pll_clk; +} + +static void visconti_pll_add_lookup(struct visconti_pll_provider *ctx, struct clk *clk, + unsigned int id) +{ + if (ctx->clk_data.clks && id) + ctx->clk_data.clks[id] = clk; +} + +void __init visconti_register_plls(struct visconti_pll_provider *ctx, + const struct visconti_pll_info *list, + unsigned int nr_plls, + spinlock_t *lock) +{ + int idx; + + for (idx = 0; idx < nr_plls; idx++, list++) { + struct clk *clk; + + clk = visconti_register_pll(ctx, + list->name, + list->parent, + list->base_reg, + list->rate_table, + list->flags, + lock); + if (IS_ERR(clk)) { + pr_err("failed to register clock %s\n", list->name); + continue; + } + + visconti_pll_add_lookup(ctx, clk, list->id); + } +} + +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, + void __iomem *base, + unsigned long nr_plls) +{ + struct visconti_pll_provider *ctx; + struct clk **clk_table; + int i; + + ctx = kzalloc(sizeof(struct visconti_pll_provider), GFP_KERNEL); + if (!ctx) + return ERR_PTR(-ENOMEM); + + clk_table = kcalloc(nr_plls, sizeof(struct clk *), GFP_KERNEL); + if (!clk_table) + goto err; + + for (i = 0; i < nr_plls; ++i) + clk_table[i] = ERR_PTR(-ENOENT); + + ctx->node = np; + ctx->reg_base = base; + ctx->clk_data.clks = clk_table; + ctx->clk_data.clk_num = nr_plls; + + return ctx; + +err: + kfree(ctx); + return ERR_PTR(-ENOMEM); +} diff --git a/drivers/clk/visconti/pll.h b/drivers/clk/visconti/pll.h new file mode 100644 index 000000000000..ce0ce1d8cd88 --- /dev/null +++ b/drivers/clk/visconti/pll.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +#ifndef _VISCONTI_PLL_H_ +#define _VISCONTI_PLL_H_ + +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> + +struct visconti_pll_provider { + void __iomem *reg_base; + struct regmap *regmap; + struct clk_onecell_data clk_data; + struct device_node *node; +}; + +#define VISCONTI_PLL_RATE(_rate, _dacen, _dsmen, \ + _refdiv, _intin, _fracin, _postdiv1, _postdiv2) \ +{ \ + .rate = _rate, \ + .dacen = _dacen, \ + .dsmen = _dsmen, \ + .refdiv = _refdiv, \ + .intin = _intin, \ + .fracin = _fracin, \ + .postdiv1 = _postdiv1, \ + .postdiv2 = _postdiv2 \ +} + +struct visconti_pll_rate_table { + unsigned long rate; + unsigned int dacen; + unsigned int dsmen; + unsigned int refdiv; + unsigned long intin; + unsigned long fracin; + unsigned int postdiv1; + unsigned int postdiv2; +}; + +struct visconti_pll_info { + unsigned int id; + const char *name; + const char *parent; + u8 flags; + unsigned long base_reg; + const struct visconti_pll_rate_table *rate_table; +}; + +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, + void __iomem *base, + unsigned long nr_plls); +void __init visconti_register_plls(struct visconti_pll_provider *ctx, + const struct visconti_pll_info *list, + unsigned int nr_plls, spinlock_t *lock); + +#endif /* _VISCONTI_PLL_H_ */ diff --git a/drivers/clk/visconti/reset.c b/drivers/clk/visconti/reset.c new file mode 100644 index 000000000000..cfe8fde5f749 --- /dev/null +++ b/drivers/clk/visconti/reset.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba Visconti ARM SoC reset controller + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include "reset.h" + +static inline struct visconti_reset *to_visconti_reset(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct visconti_reset, rcdev); +} + +static int visconti_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct visconti_reset *reset = to_visconti_reset(rcdev); + const struct visconti_reset_data *data = &reset->resets[id]; + unsigned long flags; + int ret; + + spin_lock_irqsave(reset->lock, flags); + ret = regmap_update_bits(reset->regmap, data->rson_offset, data->rs_idx, 1); + spin_unlock_irqrestore(reset->lock, flags); + + return ret; +} + +static int visconti_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct visconti_reset *reset = to_visconti_reset(rcdev); + const struct visconti_reset_data *data = &reset->resets[id]; + unsigned long flags; + int ret; + + spin_lock_irqsave(reset->lock, flags); + ret = regmap_update_bits(reset->regmap, data->rsoff_offset, data->rs_idx, 1); + spin_unlock_irqrestore(reset->lock, flags); + + return ret; +} + +static int visconti_reset_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + visconti_reset_assert(rcdev, id); + udelay(1); + visconti_reset_deassert(rcdev, id); + + return 0; +} + +static int visconti_reset_status(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct visconti_reset *reset = to_visconti_reset(rcdev); + const struct visconti_reset_data *data = &reset->resets[id]; + unsigned long flags; + u32 reg; + int ret; + + spin_lock_irqsave(reset->lock, flags); + ret = regmap_read(reset->regmap, data->rson_offset, ®); + spin_unlock_irqrestore(reset->lock, flags); + if (ret) + return ret; + + return !(reg & data->rs_idx); +} + +const struct reset_control_ops visconti_reset_ops = { + .assert = visconti_reset_assert, + .deassert = visconti_reset_deassert, + .reset = visconti_reset_reset, + .status = visconti_reset_status, +}; + +int visconti_register_reset_controller(struct device_node *np, struct regmap *regmap, + const struct visconti_reset_data *resets, + unsigned int num_resets, + const struct reset_control_ops *reset_ops, + spinlock_t *lock) +{ + struct visconti_reset *reset; + int ret; + + reset = kzalloc(sizeof(*reset), GFP_KERNEL); + if (!reset) + return -ENOMEM; + + reset->regmap = regmap; + reset->resets = resets; + reset->rcdev.ops = reset_ops; + reset->rcdev.nr_resets = num_resets; + reset->rcdev.of_node = np; + reset->lock = lock; + + ret = reset_controller_register(&reset->rcdev); + if (ret) { + pr_err("could not register reset controller: %d\n", ret); + kfree(reset); + return ret; + } + + return 0; +} diff --git a/drivers/clk/visconti/reset.h b/drivers/clk/visconti/reset.h new file mode 100644 index 000000000000..521305caa6fa --- /dev/null +++ b/drivers/clk/visconti/reset.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Toshiba ARM SoC reset controller driver + * + * Copyright (c) 2021 TOSHIBA CORPORATION + * + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +#ifndef _VISCONTI_RESET_H_ +#define _VISCONTI_RESET_H_ + +#include <linux/reset-controller.h> + +struct visconti_reset_data { + u32 rson_offset; + u32 rsoff_offset; + u8 rs_idx; +}; + +struct visconti_reset { + struct reset_controller_dev rcdev; + struct regmap *regmap; + const struct visconti_reset_data *resets; + spinlock_t *lock; +}; + +extern const struct reset_control_ops visconti_reset_ops; + +int visconti_register_reset_controller(struct device_node *np, struct regmap *regmap, + const struct visconti_reset_data *resets, + unsigned int num_resets, + const struct reset_control_ops *reset_ops, + spinlock_t *lock); +#endif /* _VISCONTI_RESET_H_ */
Add support for common interface of the common clock and reset driver for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL, and the PISMU provides clock and reset functionality. Each drivers are provided in this patch. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> --- drivers/clk/Makefile | 1 + drivers/clk/visconti/Makefile | 5 + drivers/clk/visconti/clkc-tmpv770x.c | 232 +++++++++++++++++ drivers/clk/visconti/clkc.c | 220 ++++++++++++++++ drivers/clk/visconti/clkc.h | 75 ++++++ drivers/clk/visconti/pll-tmpv770x.c | 85 ++++++ drivers/clk/visconti/pll.c | 369 +++++++++++++++++++++++++++ drivers/clk/visconti/pll.h | 63 +++++ drivers/clk/visconti/reset.c | 111 ++++++++ drivers/clk/visconti/reset.h | 35 +++ 10 files changed, 1196 insertions(+) create mode 100644 drivers/clk/visconti/Makefile create mode 100644 drivers/clk/visconti/clkc-tmpv770x.c create mode 100644 drivers/clk/visconti/clkc.c create mode 100644 drivers/clk/visconti/clkc.h create mode 100644 drivers/clk/visconti/pll-tmpv770x.c create mode 100644 drivers/clk/visconti/pll.c create mode 100644 drivers/clk/visconti/pll.h create mode 100644 drivers/clk/visconti/reset.c create mode 100644 drivers/clk/visconti/reset.h