diff mbox series

[v2,4/5] dt-bindings: iio: Add sx9324 binding

Message ID 20211104071303.3604314-5-gwendal@chromium.org (mailing list archive)
State Superseded
Headers show
Series Expand Semtech SAR Sensors support | expand

Commit Message

Gwendal Grignou Nov. 4, 2021, 7:13 a.m. UTC
Similar to SX9310, add biddings to setup sx9324 hardware properties.
SX9324 is a little different, introduce 4 phases to be configured in 2
pairs over 3 antennas.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
Changes in v2:
- Fix interrupt documentation wording.

 .../iio/proximity/semtech,sx9324.yaml         | 140 ++++++++++++++++++
 1 file changed, 140 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml

Comments

Gwendal Grignou Nov. 6, 2021, 6 a.m. UTC | #1
I need to fix capacitance resolution and meaning of proxraw-strength,
they are not accurate.

On Thu, Nov 4, 2021 at 12:13 AM Gwendal Grignou <gwendal@chromium.org> wrote:
>
> Similar to SX9310, add biddings to setup sx9324 hardware properties.
> SX9324 is a little different, introduce 4 phases to be configured in 2
> pairs over 3 antennas.
>
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> ---
> Changes in v2:
> - Fix interrupt documentation wording.
>
>  .../iio/proximity/semtech,sx9324.yaml         | 140 ++++++++++++++++++
>  1 file changed, 140 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> new file mode 100644
> index 0000000000000..2c060803632f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Semtech's SX9324 capacitive proximity sensor
> +
> +maintainers:
> +  - Gwendal Grignou <gwendal@chromium.org>
> +  - Daniel Campello <campello@chromium.org>
> +
> +description: |
> +  Semtech's SX9324 proximity sensor.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - semtech,sx9324
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      Generated by device to announce preceding read request has finished
> +      and data is available or that a close/far proximity event has happened.
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Main power supply
> +
> +  svdd-supply:
> +    description: Host interface power supply
> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +  semtech,ph0-pin:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      Indicates how each CS pin is used during phase 0.
> +      Each of the 3 pins have the following value -
> +      0 : unused (high impedance)
> +      1 : measured input
> +      2 : dynamic shield
> +      3 : grounded.
> +      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
> +    items:
> +      enum: [ 0, 1, 2, 3 ]
> +    minItems: 3
> +    maxItems: 3
> +
> +  semtech,ph1-pin:
> +  semtech,ph2-pin:
> +  semtech,ph3-pin:
> +    Same as ph0-pin
> +
> +  semtech,resolution01
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +    description:
> +      Capacitance measurement resolution. For phase 0 and 1.
> +      Higher the number, higher the resolution.
> +    default: 4
> +
> +  semtech,resolution23
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +    description:
> +      Capacitance measurement resolution. For phase 2 and 3
> +    default: 4
> +
> +  semtech,startup-sensor:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3]
> +    default: 0
> +    description:
> +      Phase used for start-up proximity detection.
> +      It is used when we enable a phase to remove static offset and measure
> +      only capacitance changes introduced by the user.
> +
> +  semtech,proxraw-strength01:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +    default: 1
> +    description:
> +      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,i
> +      and other values represent 1-1/N.
> +
> +  semtech,proxraw-strength23:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +    default: 1
> +    description:
> +      PROXRAW filter strength for phase 2 and 3. A value of 0 represents off,i
> +      and other values represent 1-1/N.
> +
> +  semtech,avg-pos-strength:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
> +    default: 16
> +    description:
> +      Average positive filter strength. A value of 0 represents off and
> +      UINT_MAX (4294967295) represents infinite. Other values
> +      represent 1-1/N.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#io-channel-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      proximity@28 {
> +        compatible = "semtech,sx9310";
> +        reg = <0x28>;
> +        interrupt-parent = <&pio>;
> +        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
> +        vdd-supply = <&pp3300_a>;
> +        svdd-supply = <&pp1800_prox>;
> +        #io-channel-cells = <1>;
> +        semtech,ph0-pin = <1, 2, 3>;
> +        semtech,ph1-pin = <3, 2, 1>;
> +        semtech,ph2-pin = <1, 2, 3>;
> +        semtech,ph3-pin = <3, 2, 1>;
> +        semtech,resolution01 = 2;
> +        semtech,resolution23 = 2;
> +        semtech,startup-sensor = <1>;
> +        semtech,proxraw-strength01 = <2>;
> +        semtech,proxraw-strength23 = <2>;
> +        semtech,avg-pos-strength = <64>;
> +      };
> +    };
> --
> 2.33.1.1089.g2158813163f-goog
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 0000000000000..2c060803632f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,140 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+  semtech,ph2-pin:
+  semtech,ph3-pin:
+    Same as ph0-pin
+
+  semtech,resolution01
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 4
+
+  semtech,resolution23
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 4
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,proxraw-strength01:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,i
+      and other values represent 1-1/N.
+
+  semtech,proxraw-strength23:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 1
+    description:
+      PROXRAW filter strength for phase 2 and 3. A value of 0 represents off,i
+      and other values represent 1-1/N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description:
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9310";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1, 2, 3>;
+        semtech,ph1-pin = <3, 2, 1>;
+        semtech,ph2-pin = <1, 2, 3>;
+        semtech,ph3-pin = <3, 2, 1>;
+        semtech,resolution01 = 2;
+        semtech,resolution23 = 2;
+        semtech,startup-sensor = <1>;
+        semtech,proxraw-strength01 = <2>;
+        semtech,proxraw-strength23 = <2>;
+        semtech,avg-pos-strength = <64>;
+      };
+    };