| Message ID | 20211105172304.1308458-1-john@metanate.com (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
| Series | usb: dwc2: gadget: respect driver's max_speed | expand |
On 11/5/2021 9:23 PM, John Keeping wrote: > UDCs should not enumerate faster than the max_speed set by the gadget > driver. Use this to further restrict the speed set in the DWC2 > parameters so that the device will not connect faster than is supported > by the gadget driver. > > For configfs-based composite devices this can be set via the max_speed > configfs file. > > Signed-off-by: John Keeping <john@metanate.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> > --- > drivers/usb/dwc2/gadget.c | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c > index 744539b78f6c..1f39c2f1be8e 100644 > --- a/drivers/usb/dwc2/gadget.c > +++ b/drivers/usb/dwc2/gadget.c > @@ -3377,6 +3377,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, > u32 val; > u32 usbcfg; > u32 dcfg = 0; > + u8 speed; > int ep; > > /* Kill any ep0 requests as controller will be reinitialized */ > @@ -3418,7 +3419,22 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, > > dcfg |= DCFG_EPMISCNT(1); > > - switch (hsotg->params.speed) { > + speed = hsotg->params.speed; > + if (hsotg->driver) { > + switch (hsotg->driver->max_speed) { > + case USB_SPEED_LOW: > + speed = DWC2_SPEED_PARAM_LOW; > + break; > + case USB_SPEED_FULL: > + if (speed != USB_SPEED_LOW) > + speed = DWC2_SPEED_PARAM_FULL; > + break; > + default: > + break; > + } > + } > + > + switch (speed) { > case DWC2_SPEED_PARAM_LOW: > dcfg |= DCFG_DEVSPD_LS; > break; >
On Mon, Nov 08, 2021 at 07:56:50AM +0000, Minas Harutyunyan wrote: > On 11/5/2021 9:23 PM, John Keeping wrote: > > UDCs should not enumerate faster than the max_speed set by the gadget > > driver. Use this to further restrict the speed set in the DWC2 > > parameters so that the device will not connect faster than is supported > > by the gadget driver. > > > > For configfs-based composite devices this can be set via the max_speed > > configfs file. > > > > Signed-off-by: John Keeping <john@metanate.com> > > Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Actually, this isn't needed following commit 5324bad66f09 ("usb: dwc2: gadget: implement udc_set_speed()") - I should have tested on something more recent than 5.10. There are still some problems in this area for dwc2 platforms that do not support high-speed, but this patch is not the fix for them. Please drop this. Sorry for the noise, John > > --- > > drivers/usb/dwc2/gadget.c | 18 +++++++++++++++++- > > 1 file changed, 17 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c > > index 744539b78f6c..1f39c2f1be8e 100644 > > --- a/drivers/usb/dwc2/gadget.c > > +++ b/drivers/usb/dwc2/gadget.c > > @@ -3377,6 +3377,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, > > u32 val; > > u32 usbcfg; > > u32 dcfg = 0; > > + u8 speed; > > int ep; > > > > /* Kill any ep0 requests as controller will be reinitialized */ > > @@ -3418,7 +3419,22 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, > > > > dcfg |= DCFG_EPMISCNT(1); > > > > - switch (hsotg->params.speed) { > > + speed = hsotg->params.speed; > > + if (hsotg->driver) { > > + switch (hsotg->driver->max_speed) { > > + case USB_SPEED_LOW: > > + speed = DWC2_SPEED_PARAM_LOW; > > + break; > > + case USB_SPEED_FULL: > > + if (speed != USB_SPEED_LOW) > > + speed = DWC2_SPEED_PARAM_FULL; > > + break; > > + default: > > + break; > > + } > > + } > > + > > + switch (speed) { > > case DWC2_SPEED_PARAM_LOW: > > dcfg |= DCFG_DEVSPD_LS; > > break; > > >
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 744539b78f6c..1f39c2f1be8e 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3377,6 +3377,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, u32 val; u32 usbcfg; u32 dcfg = 0; + u8 speed; int ep; /* Kill any ep0 requests as controller will be reinitialized */ @@ -3418,7 +3419,22 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, dcfg |= DCFG_EPMISCNT(1); - switch (hsotg->params.speed) { + speed = hsotg->params.speed; + if (hsotg->driver) { + switch (hsotg->driver->max_speed) { + case USB_SPEED_LOW: + speed = DWC2_SPEED_PARAM_LOW; + break; + case USB_SPEED_FULL: + if (speed != USB_SPEED_LOW) + speed = DWC2_SPEED_PARAM_FULL; + break; + default: + break; + } + } + + switch (speed) { case DWC2_SPEED_PARAM_LOW: dcfg |= DCFG_DEVSPD_LS; break;
UDCs should not enumerate faster than the max_speed set by the gadget driver. Use this to further restrict the speed set in the DWC2 parameters so that the device will not connect faster than is supported by the gadget driver. For configfs-based composite devices this can be set via the max_speed configfs file. Signed-off-by: John Keeping <john@metanate.com> --- drivers/usb/dwc2/gadget.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)