| Message ID | 20211116103951.34482-2-vkoul@kernel.org |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/6] phy: mvebu-cp110-utmi: Fix kernel-doc warns | expand |
On 11/16/21 2:39 AM, Vinod Koul wrote: > The functions are documented but there were style issues, so fix > the style and add missing description for phy_dwc3 > > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130: > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174: > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning: > This comment starts with '/**', but isn't a kernel-doc comment. > Refer Documentation/doc-guide/kernel-doc.rst > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++---------- > 1 file changed, 14 insertions(+), 12 deletions(-) > Reviewed-by: Randy Dunlap <rdunlap@infradead.org> thanks.
On Tue 16 Nov 04:39 CST 2021, Vinod Koul wrote: > The functions are documented but there were style issues, so fix > the style and add missing description for phy_dwc3 > > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130: > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174: > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning: > This comment starts with '/**', but isn't a kernel-doc comment. > Refer Documentation/doc-guide/kernel-doc.rst > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++---------- > 1 file changed, 14 insertions(+), 12 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c > index bfff0c8c9130..e1b8fa911416 100644 > --- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c > +++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c > @@ -127,12 +127,13 @@ struct phy_drvdata { > }; > > /** > - * Write register and read back masked value to confirm it is written > + * usb_phy_write_readback - Write register and read back masked value to "Writing kernel-doc" indicates that you should have some parenthesis after that function. > + * confirm it is written > * > - * @base - QCOM DWC3 PHY base virtual address. > - * @offset - register offset. > - * @mask - register bitmask specifying what should be updated > - * @val - value to write. > + * @phy_dwc3: QCOM DWC3 PHY base virtual address. I guess this was "base" at some point? As you're fixing up the kerneldoc, it would be nice to correct this to say something like "usb_phy context". Regards, Bjorn > + * @offset: register offset. > + * @mask: register bitmask specifying what should be updated > + * @val: value to write. > */ > static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3, > u32 offset, > @@ -171,11 +172,11 @@ static int wait_for_latch(void __iomem *addr) > } > > /** > - * Write SSPHY register > + * usb_ss_write_phycreg - Write SSPHY register > * > - * @base - QCOM DWC3 PHY base virtual address. > - * @addr - SSPHY address to write. > - * @val - value to write. > + * @phy_dwc3: QCOM DWC3 PHY base virtual address. > + * @addr: SSPHY address to write. > + * @val: value to write. > */ > static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3, > u32 addr, u32 val) > @@ -209,10 +210,11 @@ static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3, > } > > /** > - * Read SSPHY register. > + * usb_ss_read_phycreg - Read SSPHY register. > * > - * @base - QCOM DWC3 PHY base virtual address. > - * @addr - SSPHY address to read. > + * @phy_dwc3: QCOM DWC3 PHY base virtual address. > + * @addr: SSPHY address to read. > + * @val: pointer in which read is store. > */ > static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3, > u32 addr, u32 *val) > -- > 2.31.1 >
On 17-11-21, 18:18, Bjorn Andersson wrote: > On Tue 16 Nov 04:39 CST 2021, Vinod Koul wrote: > > > The functions are documented but there were style issues, so fix > > the style and add missing description for phy_dwc3 > > > > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130: > > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174: > > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning: > > This comment starts with '/**', but isn't a kernel-doc comment. > > Refer Documentation/doc-guide/kernel-doc.rst > > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > --- > > drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++---------- > > 1 file changed, 14 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c > > index bfff0c8c9130..e1b8fa911416 100644 > > --- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c > > +++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c > > @@ -127,12 +127,13 @@ struct phy_drvdata { > > }; > > > > /** > > - * Write register and read back masked value to confirm it is written > > + * usb_phy_write_readback - Write register and read back masked value to > > "Writing kernel-doc" indicates that you should have some parenthesis > after that function. Heh, it does not warn :(, will update this > > > + * confirm it is written > > * > > - * @base - QCOM DWC3 PHY base virtual address. > > - * @offset - register offset. > > - * @mask - register bitmask specifying what should be updated > > - * @val - value to write. > > + * @phy_dwc3: QCOM DWC3 PHY base virtual address. > > I guess this was "base" at some point? As you're fixing up the > kerneldoc, it would be nice to correct this to say something like > "usb_phy context". Why did I miss this one :(, yeah will update this
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c index bfff0c8c9130..e1b8fa911416 100644 --- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c @@ -127,12 +127,13 @@ struct phy_drvdata { }; /** - * Write register and read back masked value to confirm it is written + * usb_phy_write_readback - Write register and read back masked value to + * confirm it is written * - * @base - QCOM DWC3 PHY base virtual address. - * @offset - register offset. - * @mask - register bitmask specifying what should be updated - * @val - value to write. + * @phy_dwc3: QCOM DWC3 PHY base virtual address. + * @offset: register offset. + * @mask: register bitmask specifying what should be updated + * @val: value to write. */ static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3, u32 offset, @@ -171,11 +172,11 @@ static int wait_for_latch(void __iomem *addr) } /** - * Write SSPHY register + * usb_ss_write_phycreg - Write SSPHY register * - * @base - QCOM DWC3 PHY base virtual address. - * @addr - SSPHY address to write. - * @val - value to write. + * @phy_dwc3: QCOM DWC3 PHY base virtual address. + * @addr: SSPHY address to write. + * @val: value to write. */ static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3, u32 addr, u32 val) @@ -209,10 +210,11 @@ static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3, } /** - * Read SSPHY register. + * usb_ss_read_phycreg - Read SSPHY register. * - * @base - QCOM DWC3 PHY base virtual address. - * @addr - SSPHY address to read. + * @phy_dwc3: QCOM DWC3 PHY base virtual address. + * @addr: SSPHY address to read. + * @val: pointer in which read is store. */ static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3, u32 addr, u32 *val)
The functions are documented but there were style issues, so fix the style and add missing description for phy_dwc3 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130: drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174: drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Signed-off-by: Vinod Koul <vkoul@kernel.org> --- drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++---------- 1 file changed, 14 insertions(+), 12 deletions(-)