| Message ID | 20211120113454.785997-1-peng.fan@oss.nxp.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | dt-bindinds/dts: support i.MX8ULP | expand |
On Sat, 20 Nov 2021 19:34:46 +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > > V5: > only fix patch 8/8 "arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board" > - Correct bus-width to 8 for eMMC > - Drop pinctrl enet which no user > Drop patch 1/9 in V4, since in merged in linux-next > Add A-b/R-b tag > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [3/8] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string commit: 49cd1eb37b487036f51bd57b591f7b5760a10e02 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
Hi Shawn, > Subject: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP > > From: Peng Fan <peng.fan@nxp.com> > > > V5: > only fix patch 8/8 "arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk > board" > - Correct bus-width to 8 for eMMC > - Drop pinctrl enet which no user > Drop patch 1/9 in V4, since in merged in linux-next Add A-b/R-b tag > > V4: > > https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/6960 > 20.html > > I just pick-up Jacky's work, rebase and send out V4 based on Jacky's V3 > patchset. > > If you prefer to split the patchset and send single patches, I could resend one > by one. > > Note: the V3 has a gpio bindings patch, it has been separated and sent to gpio > list in a single one per Linus requested. > > This patchset is to add i.MX8ULP in dt-bindings, introduce basic i.MX8ULP dtsi > and basic evk board support. > > The detailed version changes are in each patch. > > There is checkpatch error in patch 8, but that is for device tree macro and we > could use use "(xx)". > > In V4, the changes are in patch 8, 9 when rebasing to linux-next/master ,fix > build errors after the clk driver in tree and drop a few nodes that not have > bindings. > > Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP > enabled. > > V3: > > https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping.b > ai@nxp.com/T/ > > Jacky Bai (8): > dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string > dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string > dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string > dt-bindings: timer: tpm-timer: Add imx8ulp compatible string > dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string > dt-bindings: arm: fsl: Add binding for imx8ulp evk > arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp > arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board For the several dt-bindings, patch 3 has been taken by SPI maintainer, All patches have got R-b or A-b tag. would you pick others bindings or they should go through subsystem maintainer's tree? Thanks, Peng. > > .../devicetree/bindings/arm/fsl.yaml | 6 + > .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- > .../bindings/serial/fsl-lpuart.yaml | 4 +- > .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- > .../bindings/timer/nxp,tpm-timer.yaml | 6 +- > .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- > arch/arm64/boot/dts/freescale/Makefile | 1 + > arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++ > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++ > 10 files changed, 1468 insertions(+), 9 deletions(-) create mode 100644 > arch/arm64/boot/dts/freescale/imx8ulp-evk.dts > create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > -- > 2.25.1
> Subject: RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP Seems there is conflict after Abel's patchset in next tree, I'll rebase. Thanks, Peng. > > Hi Shawn, > > > Subject: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP > > > > From: Peng Fan <peng.fan@nxp.com> > > > > > > V5: > > only fix patch 8/8 "arm64: dts: imx8ulp: Add the basic dts for > > imx8ulp evk board" > > - Correct bus-width to 8 for eMMC > > - Drop pinctrl enet which no user > > Drop patch 1/9 in V4, since in merged in linux-next Add A-b/R-b tag > > > > V4: > > > > https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/6 > > 960 > > 20.html > > > > I just pick-up Jacky's work, rebase and send out V4 based on Jacky's > > V3 patchset. > > > > If you prefer to split the patchset and send single patches, I could > > resend one by one. > > > > Note: the V3 has a gpio bindings patch, it has been separated and sent > > to gpio list in a single one per Linus requested. > > > > This patchset is to add i.MX8ULP in dt-bindings, introduce basic > > i.MX8ULP dtsi and basic evk board support. > > > > The detailed version changes are in each patch. > > > > There is checkpatch error in patch 8, but that is for device tree > > macro and we could use use "(xx)". > > > > In V4, the changes are in patch 8, 9 when rebasing to > > linux-next/master ,fix build errors after the clk driver in tree and > > drop a few nodes that not have bindings. > > > > Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP > enabled. > > > > V3: > > > > https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping > > .b > > ai@nxp.com/T/ > > > > Jacky Bai (8): > > dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string > > dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string > > dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string > > dt-bindings: timer: tpm-timer: Add imx8ulp compatible string > > dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string > > dt-bindings: arm: fsl: Add binding for imx8ulp evk > > arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp > > arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board > > For the several dt-bindings, patch 3 has been taken by SPI maintainer, > > All patches have got R-b or A-b tag. > > would you pick others bindings or they should go through subsystem > maintainer's tree? > > Thanks, > Peng. > > > > > .../devicetree/bindings/arm/fsl.yaml | 6 + > > .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- > > .../bindings/serial/fsl-lpuart.yaml | 4 +- > > .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- > > .../bindings/timer/nxp,tpm-timer.yaml | 6 +- > > .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++ > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 > ++++++++++++++++++ > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++ > > 10 files changed, 1468 insertions(+), 9 deletions(-) create mode > > 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts > > create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > > -- > > 2.25.1
> Seems there is conflict after Abel's patchset in next tree, I'll rebase.
True also for the I2C patch. A rebase would be great!
From: Peng Fan <peng.fan@nxp.com> V5: only fix patch 8/8 "arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board" - Correct bus-width to 8 for eMMC - Drop pinctrl enet which no user Drop patch 1/9 in V4, since in merged in linux-next Add A-b/R-b tag V4: https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/696020.html I just pick-up Jacky's work, rebase and send out V4 based on Jacky's V3 patchset. If you prefer to split the patchset and send single patches, I could resend one by one. Note: the V3 has a gpio bindings patch, it has been separated and sent to gpio list in a single one per Linus requested. This patchset is to add i.MX8ULP in dt-bindings, introduce basic i.MX8ULP dtsi and basic evk board support. The detailed version changes are in each patch. There is checkpatch error in patch 8, but that is for device tree macro and we could use use "(xx)". In V4, the changes are in patch 8, 9 when rebasing to linux-next/master ,fix build errors after the clk driver in tree and drop a few nodes that not have bindings. Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP enabled. V3: https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping.bai@nxp.com/T/ Jacky Bai (8): dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindings: arm: fsl: Add binding for imx8ulp evk arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board .../devicetree/bindings/arm/fsl.yaml | 6 + .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- .../bindings/serial/fsl-lpuart.yaml | 4 +- .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- .../bindings/timer/nxp,tpm-timer.yaml | 6 +- .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++ .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++ 10 files changed, 1468 insertions(+), 9 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi