| Message ID | 1637928282-2819-9-git-send-email-srivasam@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add support for audio on SC7280 based targets | expand |
On Fri, 26 Nov 2021 17:34:40 +0530, Srinivasa Rao Mandadapu wrote: > Add bindings for sc7280 lpass cpu driver which supports > audio over i2s based speaker, soundwire based headset, msm dmics > and HDMI Port. > > Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> > Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> > --- > .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 69 +++++++++++++++++++--- > 1 file changed, 61 insertions(+), 8 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: reg: [[0, 1658351616, 0, 425984], [0, 1659895808, 0, 167936]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: reg-names: ['lpass-hdmiif', 'lpass-lpaif'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: interrupts: [[0, 160, 1], [0, 268, 1]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: interrupt-names: ['lpass-irq-lpaif', 'lpass-irq-hdmi'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: iommus: [[4294967295, 4128, 0], [4294967295, 4146, 0]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1560102 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Fri, Nov 26, 2021 at 05:34:40PM +0530, Srinivasa Rao Mandadapu wrote: > Add bindings for sc7280 lpass cpu driver which supports > audio over i2s based speaker, soundwire based headset, msm dmics > and HDMI Port. > > Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> > Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> > --- > .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 69 +++++++++++++++++++--- > 1 file changed, 61 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > index 1e23c0e..0f5a57c 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > @@ -22,35 +22,36 @@ properties: > - qcom,lpass-cpu > - qcom,apq8016-lpass-cpu > - qcom,sc7180-lpass-cpu > + - qcom,sc7280-lpass-cpu > > reg: > - maxItems: 2 > + maxItems: 5 > description: LPAIF core registers > > reg-names: > - maxItems: 2 > + maxItems: 5 > > clocks: > minItems: 3 > - maxItems: 6 > + maxItems: 7 > > clock-names: > minItems: 3 > - maxItems: 6 > + maxItems: 7 > > interrupts: > - maxItems: 2 > + maxItems: 4 > description: LPAIF DMA buffer interrupt > > interrupt-names: > - maxItems: 2 > + maxItems: 4 > > qcom,adsp: > $ref: /schemas/types.yaml#/definitions/phandle > description: Phandle for the audio DSP node > > iommus: > - maxItems: 2 > + maxItems: 3 > description: Phandle to apps_smmu node with sid mask > > power-domains: > @@ -69,7 +70,7 @@ patternProperties: > "^dai-link@[0-9a-f]$": > type: object > description: | > - LPASS CPU dai node for each I2S device. Bindings of each node > + LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node > depends on the specific driver providing the functionality and > properties. > properties: > @@ -174,6 +175,58 @@ allOf: > - iommus > - power-domains > > + - if: > + properties: > + compatible: > + contains: > + const: qcom,sc7280-lpass-cpu > + > + then: > + properties: > + clock-names: > + oneOf: > + - items: #for I2S > + - const: lpass_aon_cc_audio_hm_h_clk > + - const: lpass_core_cc_sysnoc_mport_core_clk > + - const: lpass_core_cc_ext_if1_ibit_clk > + - items: #for Soundwire > + - const: lpass_aon_cc_audio_hm_h_clk > + - const: lpass_audio_cc_codec_mem0_clk > + - const: lpass_audio_cc_codec_mem1_clk > + - const: lpass_audio_cc_codec_mem2_clk > + - items: #for HDMI > + - const: lpass_aon_cc_audio_hm_h_clk 'lpass_' and '_clk' are redundant. > + > + reg-names: > + anyOf: > + - items: #for I2S > + - const: lpass-lpaif > + - items: #for I2S and HDMI > + - const: lpass-hdmiif > + - const: lpass-lpaif Doesn't this apply to other SoCs? > + - items: #for I2S, soundwire and HDMI > + - const: lpass-cdc-lpm > + - const: lpass-rxtx-lpaif > + - const: lpass-va-lpaif > + - const: lpass-hdmiif > + - const: lpass-lpaif 'lpass-' is redundant too, but consistency across SoCs is better. hdmiif and lpaif should be first. (Add new resources on the end.) > + interrupt-names: > + anyOf: > + - items: #for I2S > + - const: lpass-irq-lpaif > + - items: #for I2S and HDMI > + - const: lpass-irq-lpaif > + - const: lpass-irq-hdmi > + - items: #for I2S, soundwire and HDMI > + - const: lpass-irq-lpaif > + - const: lpass-irq-vaif > + - const: lpass-irq-rxtxif > + - const: lpass-irq-hdmi Again, add new entries to the end. > + > + required: > + - iommus > + - power-domains > + > examples: > - | > #include <dt-bindings/sound/sc7180-lpass.h> > -- > Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., > is a member of Code Aurora Forum, a Linux Foundation Collaborative Project. > >
On 11/28/2021 10:23 PM, Rob Herring wrote: Thanks for Your Time Rob!!! > On Fri, Nov 26, 2021 at 05:34:40PM +0530, Srinivasa Rao Mandadapu wrote: >> Add bindings for sc7280 lpass cpu driver which supports >> audio over i2s based speaker, soundwire based headset, msm dmics >> and HDMI Port. >> >> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> >> Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> >> Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> >> --- >> .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 69 +++++++++++++++++++--- >> 1 file changed, 61 insertions(+), 8 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml >> index 1e23c0e..0f5a57c 100644 >> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml >> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml >> @@ -22,35 +22,36 @@ properties: >> - qcom,lpass-cpu >> - qcom,apq8016-lpass-cpu >> - qcom,sc7180-lpass-cpu >> + - qcom,sc7280-lpass-cpu >> >> reg: >> - maxItems: 2 >> + maxItems: 5 >> description: LPAIF core registers >> >> reg-names: >> - maxItems: 2 >> + maxItems: 5 >> >> clocks: >> minItems: 3 >> - maxItems: 6 >> + maxItems: 7 >> >> clock-names: >> minItems: 3 >> - maxItems: 6 >> + maxItems: 7 >> >> interrupts: >> - maxItems: 2 >> + maxItems: 4 >> description: LPAIF DMA buffer interrupt >> >> interrupt-names: >> - maxItems: 2 >> + maxItems: 4 >> >> qcom,adsp: >> $ref: /schemas/types.yaml#/definitions/phandle >> description: Phandle for the audio DSP node >> >> iommus: >> - maxItems: 2 >> + maxItems: 3 >> description: Phandle to apps_smmu node with sid mask >> >> power-domains: >> @@ -69,7 +70,7 @@ patternProperties: >> "^dai-link@[0-9a-f]$": >> type: object >> description: | >> - LPASS CPU dai node for each I2S device. Bindings of each node >> + LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node >> depends on the specific driver providing the functionality and >> properties. >> properties: >> @@ -174,6 +175,58 @@ allOf: >> - iommus >> - power-domains >> >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: qcom,sc7280-lpass-cpu >> + >> + then: >> + properties: >> + clock-names: >> + oneOf: >> + - items: #for I2S >> + - const: lpass_aon_cc_audio_hm_h_clk >> + - const: lpass_core_cc_sysnoc_mport_core_clk >> + - const: lpass_core_cc_ext_if1_ibit_clk >> + - items: #for Soundwire >> + - const: lpass_aon_cc_audio_hm_h_clk >> + - const: lpass_audio_cc_codec_mem0_clk >> + - const: lpass_audio_cc_codec_mem1_clk >> + - const: lpass_audio_cc_codec_mem2_clk >> + - items: #for HDMI >> + - const: lpass_aon_cc_audio_hm_h_clk > 'lpass_' and '_clk' are redundant. Yes. but these clock names are defined by HW design team. clock drivers fallowed the same, hence in audio drivers. > >> + >> + reg-names: >> + anyOf: >> + - items: #for I2S >> + - const: lpass-lpaif >> + - items: #for I2S and HDMI >> + - const: lpass-hdmiif >> + - const: lpass-lpaif > Doesn't this apply to other SoCs? > >> + - items: #for I2S, soundwire and HDMI >> + - const: lpass-cdc-lpm >> + - const: lpass-rxtx-lpaif >> + - const: lpass-va-lpaif >> + - const: lpass-hdmiif >> + - const: lpass-lpaif > 'lpass-' is redundant too, but consistency across SoCs is better. > > hdmiif and lpaif should be first. (Add new resources on the end.) Okay.. order is maintained as per register addresses. if it's okay, even address range is out of order, will change accordingly. > >> + interrupt-names: >> + anyOf: >> + - items: #for I2S >> + - const: lpass-irq-lpaif >> + - items: #for I2S and HDMI >> + - const: lpass-irq-lpaif >> + - const: lpass-irq-hdmi >> + - items: #for I2S, soundwire and HDMI >> + - const: lpass-irq-lpaif >> + - const: lpass-irq-vaif >> + - const: lpass-irq-rxtxif >> + - const: lpass-irq-hdmi > Again, add new entries to the end. Replied above for the same. >> + >> + required: >> + - iommus >> + - power-domains >> + >> examples: >> - | >> #include <dt-bindings/sound/sc7180-lpass.h> >> -- >> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., >> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project. >> >>
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index 1e23c0e..0f5a57c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -22,35 +22,36 @@ properties: - qcom,lpass-cpu - qcom,apq8016-lpass-cpu - qcom,sc7180-lpass-cpu + - qcom,sc7280-lpass-cpu reg: - maxItems: 2 + maxItems: 5 description: LPAIF core registers reg-names: - maxItems: 2 + maxItems: 5 clocks: minItems: 3 - maxItems: 6 + maxItems: 7 clock-names: minItems: 3 - maxItems: 6 + maxItems: 7 interrupts: - maxItems: 2 + maxItems: 4 description: LPAIF DMA buffer interrupt interrupt-names: - maxItems: 2 + maxItems: 4 qcom,adsp: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle for the audio DSP node iommus: - maxItems: 2 + maxItems: 3 description: Phandle to apps_smmu node with sid mask power-domains: @@ -69,7 +70,7 @@ patternProperties: "^dai-link@[0-9a-f]$": type: object description: | - LPASS CPU dai node for each I2S device. Bindings of each node + LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node depends on the specific driver providing the functionality and properties. properties: @@ -174,6 +175,58 @@ allOf: - iommus - power-domains + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpass-cpu + + then: + properties: + clock-names: + oneOf: + - items: #for I2S + - const: lpass_aon_cc_audio_hm_h_clk + - const: lpass_core_cc_sysnoc_mport_core_clk + - const: lpass_core_cc_ext_if1_ibit_clk + - items: #for Soundwire + - const: lpass_aon_cc_audio_hm_h_clk + - const: lpass_audio_cc_codec_mem0_clk + - const: lpass_audio_cc_codec_mem1_clk + - const: lpass_audio_cc_codec_mem2_clk + - items: #for HDMI + - const: lpass_aon_cc_audio_hm_h_clk + + reg-names: + anyOf: + - items: #for I2S + - const: lpass-lpaif + - items: #for I2S and HDMI + - const: lpass-hdmiif + - const: lpass-lpaif + - items: #for I2S, soundwire and HDMI + - const: lpass-cdc-lpm + - const: lpass-rxtx-lpaif + - const: lpass-va-lpaif + - const: lpass-hdmiif + - const: lpass-lpaif + interrupt-names: + anyOf: + - items: #for I2S + - const: lpass-irq-lpaif + - items: #for I2S and HDMI + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi + - items: #for I2S, soundwire and HDMI + - const: lpass-irq-lpaif + - const: lpass-irq-vaif + - const: lpass-irq-rxtxif + - const: lpass-irq-hdmi + + required: + - iommus + - power-domains + examples: - | #include <dt-bindings/sound/sc7180-lpass.h>