| Message ID | 20211115070809.15529-4-sergio.paracuellos@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | PCI: mt7621: remove specific MIPS code from driver | expand |
s/avoid custom/Avoid custom/ in subject. On Mon, Nov 15, 2021 at 08:08:07AM +0100, Sergio Paracuellos wrote: > Driver code is setting up MIPS specific I/O coherency units addresses config. > This MIPS specific thing has been moved to be done when PCI code call the > 'pcibios_root_bridge_prepare()' function which has been implemented for MIPS > ralink mt7621 platform. Hence, remove MIPS specific code from driver code. > After this changes there is also no need to add any MIPS specific includes > to avoid some errors reported by Kernet Tets Robot with W=1 builds. s/this changes/this change/ s/Tets/Test/ The patch doesn't touch any #include lines, so I'm not sure what the last sentence is telling us. > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> > --- > drivers/pci/controller/pcie-mt7621.c | 37 ---------------------------- > 1 file changed, 37 deletions(-) > > diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c > index b60dfb45ef7b..9cf541f5de9c 100644 > --- a/drivers/pci/controller/pcie-mt7621.c > +++ b/drivers/pci/controller/pcie-mt7621.c > @@ -208,37 +208,6 @@ static inline void mt7621_control_deassert(struct mt7621_pcie_port *port) > reset_control_assert(port->pcie_rst); > } > > -static int setup_cm_memory_region(struct pci_host_bridge *host) > -{ > - struct mt7621_pcie *pcie = pci_host_bridge_priv(host); > - struct device *dev = pcie->dev; > - struct resource_entry *entry; > - resource_size_t mask; > - > - entry = resource_list_first_type(&host->windows, IORESOURCE_MEM); > - if (!entry) { > - dev_err(dev, "cannot get memory resource\n"); > - return -EINVAL; > - } > - > - if (mips_cps_numiocu(0)) { > - /* > - * FIXME: hardware doesn't accept mask values with 1s after > - * 0s (e.g. 0xffef), so it would be great to warn if that's > - * about to happen > - */ > - mask = ~(entry->res->end - entry->res->start); > - > - write_gcr_reg1_base(entry->res->start); > - write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); > - dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n", > - (unsigned long long)read_gcr_reg1_base(), > - (unsigned long long)read_gcr_reg1_mask()); > - } > - > - return 0; > -} > - > static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie, > struct device_node *node, > int slot) > @@ -557,12 +526,6 @@ static int mt7621_pci_probe(struct platform_device *pdev) > goto remove_resets; > } > > - err = setup_cm_memory_region(bridge); > - if (err) { > - dev_err(dev, "error setting up iocu mem regions\n"); > - goto remove_resets; > - } > - > return mt7621_pcie_register_host(bridge); > > remove_resets: > -- > 2.33.0 >
Hi Bjorn, On Wed, Dec 1, 2021 at 7:16 PM Bjorn Helgaas <helgaas@kernel.org> wrote: > > s/avoid custom/Avoid custom/ in subject. Ok, I will change this and send v2 of this series after the PATCH 1 change in the series is clear and validated that it is an accepted way to go. > > On Mon, Nov 15, 2021 at 08:08:07AM +0100, Sergio Paracuellos wrote: > > Driver code is setting up MIPS specific I/O coherency units addresses config. > > This MIPS specific thing has been moved to be done when PCI code call the > > 'pcibios_root_bridge_prepare()' function which has been implemented for MIPS > > ralink mt7621 platform. Hence, remove MIPS specific code from driver code. > > After this changes there is also no need to add any MIPS specific includes > > to avoid some errors reported by Kernet Tets Robot with W=1 builds. > > s/this changes/this change/ > s/Tets/Test/ Ups, true. Thanks :). > > The patch doesn't touch any #include lines, so I'm not sure what the > last sentence is telling us. Kernel test robot reported implicit declarations because of the use of MIPS specific functions without explicit include added in driver code [0]. After this change, this issue also disappears and that is why 'Reported-by' tag is added and this sentence included in the commit message. Let me know the way you prefer me to write the commit message to take into account this fact. Thanks, Sergio Paracuellos [0]: https://lore.kernel.org/lkml/CAMhs-H_yugWd4v1OnBR8iqTVQS_T-S3pdrJbZq=MC646QSyb4Q@mail.gmail.com/T/ > > > Reported-by: kernel test robot <lkp@intel.com> > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> > > --- > > drivers/pci/controller/pcie-mt7621.c | 37 ---------------------------- > > 1 file changed, 37 deletions(-) > > > > diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c > > index b60dfb45ef7b..9cf541f5de9c 100644 > > --- a/drivers/pci/controller/pcie-mt7621.c > > +++ b/drivers/pci/controller/pcie-mt7621.c > > @@ -208,37 +208,6 @@ static inline void mt7621_control_deassert(struct mt7621_pcie_port *port) > > reset_control_assert(port->pcie_rst); > > } > > > > -static int setup_cm_memory_region(struct pci_host_bridge *host) > > -{ > > - struct mt7621_pcie *pcie = pci_host_bridge_priv(host); > > - struct device *dev = pcie->dev; > > - struct resource_entry *entry; > > - resource_size_t mask; > > - > > - entry = resource_list_first_type(&host->windows, IORESOURCE_MEM); > > - if (!entry) { > > - dev_err(dev, "cannot get memory resource\n"); > > - return -EINVAL; > > - } > > - > > - if (mips_cps_numiocu(0)) { > > - /* > > - * FIXME: hardware doesn't accept mask values with 1s after > > - * 0s (e.g. 0xffef), so it would be great to warn if that's > > - * about to happen > > - */ > > - mask = ~(entry->res->end - entry->res->start); > > - > > - write_gcr_reg1_base(entry->res->start); > > - write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); > > - dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n", > > - (unsigned long long)read_gcr_reg1_base(), > > - (unsigned long long)read_gcr_reg1_mask()); > > - } > > - > > - return 0; > > -} > > - > > static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie, > > struct device_node *node, > > int slot) > > @@ -557,12 +526,6 @@ static int mt7621_pci_probe(struct platform_device *pdev) > > goto remove_resets; > > } > > > > - err = setup_cm_memory_region(bridge); > > - if (err) { > > - dev_err(dev, "error setting up iocu mem regions\n"); > > - goto remove_resets; > > - } > > - > > return mt7621_pcie_register_host(bridge); > > > > remove_resets: > > -- > > 2.33.0 > >
diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c index b60dfb45ef7b..9cf541f5de9c 100644 --- a/drivers/pci/controller/pcie-mt7621.c +++ b/drivers/pci/controller/pcie-mt7621.c @@ -208,37 +208,6 @@ static inline void mt7621_control_deassert(struct mt7621_pcie_port *port) reset_control_assert(port->pcie_rst); } -static int setup_cm_memory_region(struct pci_host_bridge *host) -{ - struct mt7621_pcie *pcie = pci_host_bridge_priv(host); - struct device *dev = pcie->dev; - struct resource_entry *entry; - resource_size_t mask; - - entry = resource_list_first_type(&host->windows, IORESOURCE_MEM); - if (!entry) { - dev_err(dev, "cannot get memory resource\n"); - return -EINVAL; - } - - if (mips_cps_numiocu(0)) { - /* - * FIXME: hardware doesn't accept mask values with 1s after - * 0s (e.g. 0xffef), so it would be great to warn if that's - * about to happen - */ - mask = ~(entry->res->end - entry->res->start); - - write_gcr_reg1_base(entry->res->start); - write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); - dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n", - (unsigned long long)read_gcr_reg1_base(), - (unsigned long long)read_gcr_reg1_mask()); - } - - return 0; -} - static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie, struct device_node *node, int slot) @@ -557,12 +526,6 @@ static int mt7621_pci_probe(struct platform_device *pdev) goto remove_resets; } - err = setup_cm_memory_region(bridge); - if (err) { - dev_err(dev, "error setting up iocu mem regions\n"); - goto remove_resets; - } - return mt7621_pcie_register_host(bridge); remove_resets:
Driver code is setting up MIPS specific I/O coherency units addresses config. This MIPS specific thing has been moved to be done when PCI code call the 'pcibios_root_bridge_prepare()' function which has been implemented for MIPS ralink mt7621 platform. Hence, remove MIPS specific code from driver code. After this changes there is also no need to add any MIPS specific includes to avoid some errors reported by Kernet Tets Robot with W=1 builds. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- drivers/pci/controller/pcie-mt7621.c | 37 ---------------------------- 1 file changed, 37 deletions(-)