@@ -27,6 +27,7 @@ config ARM_VIRT
select DIMM
select ACPI_HW_REDUCED
select ACPI_APEI
+ select VIRTIO_MEM_SUPPORTED
config CHEETAH
bool
@@ -71,9 +71,11 @@
#include "hw/arm/smmuv3.h"
#include "hw/acpi/acpi.h"
#include "target/arm/internals.h"
+#include "hw/mem/memory-device.h"
#include "hw/mem/pc-dimm.h"
#include "hw/mem/nvdimm.h"
#include "hw/acpi/generic_event_device.h"
+#include "hw/virtio/virtio-mem-pci.h"
#include "hw/virtio/virtio-iommu.h"
#include "hw/char/pl011.h"
#include "qemu/guest-random.h"
@@ -2480,6 +2482,63 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev,
dev, &error_abort);
}
+static void virt_virtio_md_pci_pre_plug(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
+ Error *local_err = NULL;
+
+ if (!hotplug_dev2 && dev->hotplugged) {
+ /*
+ * Without a bus hotplug handler, we cannot control the plug/unplug
+ * order. We should never reach this point when hotplugging on x86,
+ * however, better add a safety net.
+ */
+ error_setg(errp, "hotplug of virtio based memory devices not supported"
+ " on this bus.");
+ return;
+ }
+ /*
+ * First, see if we can plug this memory device at all. If that
+ * succeeds, branch of to the actual hotplug handler.
+ */
+ memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL,
+ &local_err);
+ if (!local_err && hotplug_dev2) {
+ hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err);
+ }
+ error_propagate(errp, local_err);
+}
+
+static void virt_virtio_md_pci_plug(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
+ Error *local_err = NULL;
+
+ /*
+ * Plug the memory device first and then branch off to the actual
+ * hotplug handler. If that one fails, we can easily undo the memory
+ * device bits.
+ */
+ memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
+ if (hotplug_dev2) {
+ hotplug_handler_plug(hotplug_dev2, dev, &local_err);
+ if (local_err) {
+ memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
+ }
+ }
+ error_propagate(errp, local_err);
+}
+
+static void virt_virtio_md_pci_unplug_request(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ /* We don't support hot unplug of virtio based memory devices */
+ error_setg(errp, "virtio based memory devices cannot be unplugged.");
+}
+
+
static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
@@ -2513,6 +2572,8 @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
qdev_prop_set_uint32(dev, "len-reserved-regions", 1);
qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str);
g_free(resv_prop_str);
+ } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
+ virt_virtio_md_pci_pre_plug(hotplug_dev, dev, errp);
}
}
@@ -2538,6 +2599,8 @@ static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
vms->iommu = VIRT_IOMMU_VIRTIO;
vms->virtio_iommu_bdf = pci_get_bdf(pdev);
create_virtio_iommu_dt_bindings(vms);
+ } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
+ virt_virtio_md_pci_plug(hotplug_dev, dev, errp);
}
}
@@ -2588,6 +2651,8 @@ static void virt_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev,
{
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
virt_dimm_unplug_request(hotplug_dev, dev, errp);
+ } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
+ virt_virtio_md_pci_unplug_request(hotplug_dev, dev, errp);
} else {
error_setg(errp, "device unplug request for unsupported device"
" type: %s", object_get_typename(OBJECT(dev)));
@@ -2611,7 +2676,8 @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine,
MachineClass *mc = MACHINE_GET_CLASS(machine);
if (device_is_dynamic_sysbus(mc, dev) ||
- (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) {
+ object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) ||
+ object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
return HOTPLUG_HANDLER(machine);
}
if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) {
@@ -117,7 +117,7 @@ static uint64_t virtio_mem_default_block_size(RAMBlock *rb)
* The memory block size corresponds mostly to the section size.
*
* This allows e.g., to add 20MB with a section size of 128MB on x86_64, and
- * a section size of 1GB on arm64 (as long as the start address is properly
+ * a section size of 512MB on arm64 (as long as the start address is properly
* aligned, similar to ordinary DIMMs).
*
* We can change this at any time and maybe even make it configurable if
@@ -126,6 +126,8 @@ static uint64_t virtio_mem_default_block_size(RAMBlock *rb)
*/
#if defined(TARGET_X86_64) || defined(TARGET_I386)
#define VIRTIO_MEM_USABLE_EXTENT (2 * (128 * MiB))
+#elif defined(TARGET_ARM)
+#define VIRTIO_MEM_USABLE_EXTENT (2 * (512 * MiB))
#else
#error VIRTIO_MEM_USABLE_EXTENT not defined
#endif
This supports virtio-mem-pci device on "virt" platform, by simply following the implementation on x86. * This implements the hotplug handlers to support virtio-mem-pci device hot-add, while the hot-remove isn't supported as we have on x86. * The block size is 512MB on ARM64 instead of 128MB on x86. * It has been passing the tests with various combinations like 64KB and 4KB page sizes on host and guest, different memory device backends like normal, transparent huge page and HugeTLB, plus migration. Co-developed-by: David Hildenbrand <david@redhat.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Gavin Shan <gshan@redhat.com> --- hw/arm/Kconfig | 1 + hw/arm/virt.c | 68 +++++++++++++++++++++++++++++++++++++++++- hw/virtio/virtio-mem.c | 4 ++- 3 files changed, 71 insertions(+), 2 deletions(-)